CERTAIN MISC REPAIRS, PERIODICAL SERVICES, REPAIRS TO JOINERY, WINDOWS AND OTHER CONNECTED MISCELLANEOUS ITEMS TO MD ACCN IN MH LINES UNDER GE E/M BASE HOSPITAL DELHI CANTT-10

Amount

Surface Excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exc 1.50 Metre wide or not exceeding 10 Sqm on plan, 1.50 Metre in depth for manholes & sewage lines, drain etc and getting out in soft/loose soil complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, pillars etc, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete unreinforced in ground floor & pavings not exc 15 cm thickness below or above GL complete all as specified and as directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key scrubbing down with water etc, complete all as specified and as directed.

Taking down Chowkats with shutters (Without taking off shutters) area exc 1.5 Sqm but not exc 4.00 Sqm complete all as specified and as directed.

Taking down Chowkats with shutters (Without taking off shutters) area not exc 1.5 Sqm complete all as specified & directed.

Taking down steel tubing and connections, 15 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Taking down steel tubing and connections, 20 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

S&F solid PVC door frame of size, 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing incl 3 Nos 100mm PTMT Hinge, 2 Nos 150 mm PTMT Tower bolt and 2 Nos 150 mm PTMT handle complete all as specified and as directed.

M&L 25 mm thick PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate) below tiles for levelling of existing surface complete all as specified and as directed.

M&L Non-skid Ceramic tiles 7 to 8mm thick (square/rectangular), coloured, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. laid over and including 15mm thick cement mortar 1: 6 screed bed or bedding layer, jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and as directed.

M&L glazed ceramic tiles, coloured, in vertical surface, 350 X 250 X 7mm or 450 X 350 X 7mm thick or 450 X 300 X 7mm thick, for skirting/dado etc, over & including 10 mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and as directed.

M&L Brick work in cement mortar 1:4 using Sub class 'B' brick, straight or curved on plan exc 6m mean radius complete all as specified and as directed.

All as per item No. 17.00 here-in-before but except bricks complete all as specified and as directed.

M&L Reinforced cement concrete (nominal mix) 1:1.5:3, Type A1 (using 20 mm graded crushed stone aggregate) as in slab etc supported on walls and covers slab, Chajjas for drain etc including necessary form work etc, complete all as specified and as directed.

M&L 15 mm thick plastering in cement mortar 1:6, on brick work or concrete surfaces, finishes even & smooth without using extra cement complete all as specified and as directed.

M&L 10mm thick plaster in cement mortar 1:3 on ceiling surface of concrete, finished even and smooth without using extra cement complete all as specified and as directed.

M& L for 15mm thick rendering in cement mortar 1:4 on external surface, on brick or concrete surfaces, finishes even & fair without using extra cement, mixed with 3% water proofing compound complete all as specified and as directed. Note: WPC shall be measured and paid separately under respective item of this schedule.

Supply only water proofing compound complete all as specified and as directed.

M&L Mild Steel angle 40X40X5mm as in door chowkhats including hold fast as required conforming to Fe-290 (Gde E-165) complete all as specified & as directed.

M&L PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in PCC blocks, for fixing Hold fasts etc complete all as specified and as directed.

S & F 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides with lipping complete all as specified and as directed.

S&F 35mm thick, factory made, 2nd class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, supplied and fitted to chowkats complete all as specified and as directed.

S&F 35 mm thick, 2nd class Hardwood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F 100 mm long, stainless steel Butt hinges with galvanised mild steel hinge pin, and fixed complete all as specified & as directed.

S&F 150 mm size aluminium alloy handles, fabricated type, anodised complete all as specified & as directed.

S&F 200 mm size aluminium anodised tower bolts of extruded section complete all as specified & as directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified & as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & as directed.

All as per item No 33.00 here in before but fixed in Repair complete all as specified & as directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden/steel frame/windows and S&F 4 mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc 0.50 Sqm in each pane complete all as specified & as directed.

S&F in repair 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring including dismantling/ removing old unserviceable door stopper complete all as specified & as directed.

M&L for welding at site at any floor, any description such as MS Butt Hinges, steel window box type hinges, wire mesh and similar articles etc, (including taking down and refixing shutter, if required) and making shutter functional complete all as specified and as directed.

Petty repair such as Easing of door/window/cup board shutters of any type for easy closing/opening, tightening of hinges, adjustment, repair/refixing to pelmet/curtain rod/tower bolts/ sliding bolts/ handles/ knobs/ hasps & staples/ door stopper etc complete all as specified & directed. (Note : All complaint shall be attended within 24 Hour of intimation of complaint by JE in Charge, failing which, penalty of Rs 50.00 per complaint per day shall be imposed on Contractor).

M&L 75 mm PCC 1:3:6, type C-2 using 40mm graded stone aggregate as in plinth protection/hard standing and finished the surface even and smooth without using extra cement complete all as specified and directed.

S & F 15 mm bore, galvanised iron tubing, medium grade with all fittings, laid in floors or fixed to walls or ceiling, in any length, complete all as specified and as directed.

S & F 20 mm bore, galvanised iron tubing, medium grade with all fittings, laid in floors or fixed to walls or ceiling, in any length, complete all as specified and as directed.

S&F in repair Stainless steel curtain rails (Harrison rails) with fixing brackets, stops, rollers, fancy type complete all as specified and as directed.

S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and as directed.

S&F in repair Grating doom 125 mm dia of PTMT (Minimum weight 40 gms) complete all as specified and as directed.

S&F in repair white, vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm with integral foot rests (excluding flushing cistern and flush pipe), including connection to drain (or out going pipe and to flushing pipe anti syphonic pipe etc including provision of lime concrete complete all as specified and as directed.

S & F in repair white, Vitreous China, wash down water closet pan (pedestal pattern & trap) including connection to drain (or out going pipe) and to flushing pipe, anti syphonic pipe etc complete all as specified and as directed.

S & F in repair plastic water closet seat, black/white, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair PVC low level, valve less, syphonic action type, flushing cistern, 10 litre capacity, white, with inlet, ball valve, float and handle including brackets and 32 mm PVC flush pipe complete all as specified and as directed.

S&F in repair white, vitreous china, wash hand basin, flat back, size 550 mm x 400 mm, including cutting for and pinning in end of brackets,15mm angular stop cock, 32 mm brass chromium plated waste fittings, PVC connections of required size, for glazed ware sinks, basins etc, including 15 mm bore CP fancy type pillar tap with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed, and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and as directed.

S&F in repair Stain less steel Kitchen sinks with drainage board, made out of 1 mm thick stainless steel Sheet, with plugs, washers and wastes; including bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to pipe, overall size 915 X 460 mm, bowl size 410 mm X 330 mm X 160 mm complete all as specified and as directed.

S&F in repair 32mm waste coupling of PTMT (half or full threaded), (Minimum 32 mm - 45 gms/40 mm-60 gms) complete all as specified and as directed.

S&F in repair Waste fitting, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair 15mm Bib taps, brass chromium plated, fancy type, screwed down, screwed fir iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair Stop valves (Angle cock), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed.

S&F in repair Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair PVC connection 15 mm size, length 600 mm with PTMT nuts complete all as specified and directed.

S&F in repairs PVC flush pipe 32 mm dia for low level flushing cistern complete all as specified and as directed.

S&F in repairs Swivel shower of PTMT, any colour for fixing with 15mm pipe, (Minimum weight 40gms) complete all as specified and as directed.

S&F in repairs 500 Litre capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), Triple layered, hoisted and fixed in position and connecting complete including S&F 15 mm float valve and dismantling the old tanks and removing to store all as specified in SSR Part-1 complete all as specified and as directed.

S&F in repair PVC Pipe (SWR) 75mm dia fixed in wall, laid in floors or trenches with and including all fittings such as Tee, elbow, socket, junction, reducer, short pieces etc including taking down of old pipe complete all as specified and as directed.

S&F in repair PVC Pipe (SWR) 110mm dia fixed in wall, laid in floors or trenches with and including all fittings such as Tee, elbow, socket, junction, reducer, short pieces etc including taking down of old pipe complete all as specified and directed.

S&F in repair 100 mm Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar including all fittings heads, shoes, bends, swan necks etc including cleaning or refixing or removal to store complete all as specified and as directed.

S&F salt glazed stone ware drain pipes laid in trenches and jointed internal dia of pipe 150 mm grade 'A' complete all as specified and as directed.

All as per srl item No. 66.00 here in before but internal dia of pipe 200 mm complete all as specified and as directed.

M&L cement mortar concrete bed to drain pipes in PCC 1:3:6, type C-2, using 40 mm graded crushed stone aggregate, including packing under and haunching against the sides of pipes after they are laid and tested, bore of pipe 150 mm dia complete all as specified and as directed.

M&L cement mortar concrete bed to drain pipes in PCC 1:3:6, type C-2, using 40 mm graded crushed stone aggregate, including packing under and haunching against the sides of pipes after they are laid and tested, bore of pipe 200 mm dia complete all as specified and as directed.

M&L plain cement concrete 1:3:6, type C1, using 20mm graded stone aggregate, as in copings, kneelers, apex stones, bed plates, fixing hold fasts and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified & as directed.

Returning, filling in including spreading levelling, watering and well ramming in layers not exc 25 cm thick in any type of soil complete all as specified and as directed.

M&L for removing excavated soil to a distance exc 500 Metre but not exc 1.0 Km and depositing where directed complete all as specified and as directed.

M & L for preparing the newly plastered wall surface and applying two coats of oil bound distemper over & including one coat of alkali resistant primer, on plastered surfaces complete all as specified and directed.

M&L for preparation of new plastered or unplastered wall surfaces and applying three coats of white wash complete all as specified & directed.

M & L for preparing the newly plastered ceiling surface and applying three coats of white wash complete all as specified and as directed.

M & L preparation of new surfaces of walls plastered or unplastered and applying two coats of cement base paint over a coat of white wash to walls to obtain uniform surfaces including making good the surface complete all as specified & directed.

M&L applying 1 mm thick wall care putty on new or old wall surfaces and rubbing with sand paper to make uniform smooth surface complete all as specified and as directed.

M&L preparation of old plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified & as directed.

M&L complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine and applying two coats of Oil bound distemper of tint as approved by Engineer in Charge over and including one priming coat of chalk whiting complete all as specified and as directed.

M&L for preparing the old decorated ceiling surface by brooming and removing all loose layers of old treatment, efflorescence , soot and moss by wire brush and filling all nail holes and patches with cement based wall care putty and applying one or more coat lime wash white on patches to bring the whole surface at par and applying one coat of lime wash white on complete Ceiling surface complete all as specified and as directed.

M&L for preparing the old decorated wall surface by brooming and removing all loose layers of old treatment, efflorescence, soot and moss by wire brush and filling all nail holes and patches with cement based wall care putty and applying one or more coat lime wash white on patches to bring the whole surface at par and applying one coat of lime wash white on complete wall surface complete all as specified and as directed.

M & L for preparing the old surface of wall by washing down and rubbing and removing all loose layers of old treatment, efflorescence, soot and moss by wire brush and filling all nail holes and patches with cement based wall care putty and applying one or more coat of oil bound distemper on patches to bring the whole surface at par and applying one coat of oil bound distemper on complete wall surface complete all as specified and as directed.

M & L for preparing the old surface of ceiling by washing down and rubbing and removing all loose layers of old treatment, efflorescence, soot and moss by wire brush and filling all nail holes and patches with cement based wall care putty and applying one or more coat of oil bound distemper on patches to bring the whole surface at par and applying one coat of oil bound distemper on complete ceiling surface complete all as specified and as directed.

M&L for preparing the old painted wooden surface of any description exc 10cm width or girth by removing all dirt, dust, rust and grease, stopping and filling the holes and patches and applying one coat of synthetic enamel paint on patches and then applying one coat of synthetic enamel paint on complete surface complete all as specified and as directed.

M&L for preparing the old painted steel surface of any description exc 10cm width or girth by removing all dirt, dust, rust and grease, stopping and filling the holes and patches and applying one coat of synthetic enamel paint on patches and then applying one coat of synthetic enamel paint on complete surface complete all as specified and as directed.

M&L for preparing old decorated wall surface by brooming and removing all loose layers of old treatment, efflorescence soot and moss by wire brush and filling all nail holes and patches with cement based wall care putty and applying two coat of weather Proof Exterior Emulsion Paint (Apex Ultima) of colour as Approved by Engineer in Charge, in wall, roof (corrugal) complete all as specified and as directed.

M & L for preparing the old decorated wall surface by brooming and removing all loose layers of old treatment, efflorescence , soot and moss by wire brush and filling all nail holes and patches with cement wall putty and applying one coat of Cement based paint complete all as specified and as directed.

M & L for complete removal of existing treatment from old decorated wall surface scrapping by electrically operated grinder machine and filling all patches with cement based wall care putty and applying one coat of Cement based paint on patches to bring the whole at par and applying two coat of Cement based paint on complete wall surface complete all as specified and as directed.

M & L for preparing the old decorated ceiling surface by brooming and removing all loose layers of old treatment, efflorescence, soot and moss by wire brush and filling all nail holes and patches with cement base wall care putty and applying one or more coat lime wash white on patches to bring the whole surface at par and applying one coat of lime wash white on complete Ceiling surface complete all as specified and as directed.

M&L preparation of new or previously untreated steel surface, width or girth exc 10cm and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified & as directed.

M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and as directed.

M&L Mild steel TMT bars of Grade Fe-500, 8mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

MAA SANTOSHI ENTERPRISES

M/s Durga Traders

friends associeates

M/S Arvind Electricals

SABHARWAL CONSTRUCTION CO.

M/S CHANDER MUNI

NARAYAN CONSTRUCTIONS