PROVN OF STORAGE ACCN FOR SUGAR STORAGE AT 271 COY ASC (SUP) TYPE C UNDER GE (P) PANAGARH

Amount

Surface excavation n exc 30 cm deep and average 15 cm in soft/loose soil and getting out .

Excavation in trenches n exc 1.5m deep and getting out in soft loose soil.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundaton and filling mass concrete.

M&L for anti termite treatment to the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M&L for anti termite treatment the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface

M&L for anti termite treatment the soil along with external perimeter of building at the rate of 2.25 litres of emulsion per metre of the perimetre wall, Make for item Nos 87 to 90:- M/s Kanoriya Chemicals Kanodane 20 EC / M/s India Pesticides Ltd Lindene 20% (Grammx 20%) / M/s FMC India Pvt Ltd. Biflex/ Chloropyriphos 20% EC.

Returning , filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cms in soft /loose soil.

Removing excavated material not exceed 50 m depositing where directed level n exc 1.5 mtr above the starting point

TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming

S&F Mild steel TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Mild steel TMT bars 5mm and over upto and including 10mm dia in stirrups, spaces and binders cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter rough finish all as specified.

Form work to sides of pillars, posts, struts, piers, columns and stanchions

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

Use & waste for form work to soffits of suspended slab such as roof slab , landing and similar work, not exc 200mm thick horizontal or sloping, finsihed fair and even complete all as specified and directed.

M&L for RCC M 25 (deign Mix) using 20mm grades stone aggregate as in Foundations including raft footings, foundation beams, plinth beams, bases for columns and like complete all as specified and directed.

M&L for RCC M 25 (deign Mix) using 20mm grades stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC M 25 (deign Mix) using 20mm grades stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC M 25 (deign Mix) using 20mm grades stone aggregate as in slabs supported on wall and beams and column in floors, roofs landing etc

M&L for 10mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3% by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

M&L for providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the of the following for roofs- (a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar paste. (b) One coat of hot blown bitumen of grade 85/25 @ 1.2Kg /sqm shall be applied over primed surfaces. (c) One layer of APP based polymeric water proofing membrane of weight not less than 3kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 10mm and the over lap shall be sealed by flame. (d) Applying two coats of aluminium paint on top of membrane @ 0.10Kg/Sqm. Make:- STP / IWL / Any other reputed make as approved by the GE.

Supply only integral water proofing compound (Makes : Pidilie Industries / Impermo / Snowcem India Ltd/ Sika).

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

M&L for Brickwork with fly ash bricks or birck tiles in brick on edge walls (less than 1/2 brick thick), built in cement mortar (1:4) complete all as specified and directed.

M&L for 10mm thick rendering cement mortar 1:6 on brick work or concrete surfaces finished even and smooth using extra cement complete all specified and directed. Note:- Surface shallnot be finished even & smooth , where puty is applied.)

M&L rendering on concrete/brick surfaces 15mm thick in CM 1:4 using with water proofing compound as per manufactures instruction finished even and smooth without using extra cement complete all as specified (Note:- WPC measured and paid saperately)

M&L 5mm thick rendering in Cement Mortar 1:3 on Concrete Surfaces, ceiling etc finished surface Even and Smooth, without using extra cement.

M&L for Preparing Newly Plastered Surfaces of external Walls and applying Two Coats of Cement Base Paint, first quality, over a coat of white cement primer complete all as specified and directed. Make:- Jotun India Pvt Ltd./ Snowcem Plus / Berger / Asian Paints (Gutucam / Crimocem Super Cement paints

M&L for Preparing Newly Plastered Surfaces of internal Walls and applying Two Coats of oil emulsion distemper, first quality, over 3mm thick wall care putty, first quality, on wall plastered surface complete all as specified and directed. Make:- Paint:- Jotun India Pvt Ltd / Jadoo (Bergar) / elvet Acrylic / Distemper (Crimson Paint Pvt Ltd) / British Paint / (Nerolac) Putty:- Berger / J&N / Birla Laval Plast / Shalimar Paints / Asian Paints.

M&L for Preparation of Newly Plastered Surfaces and applying Three Coats of white wash, first quality, as in ceilling complete all as specified and directed. Make of lime:- Birla White / Rayalseem chemical Ind. / Swastik Chemical Ind.

M&L 75mm thick PCC 1:3:6 type C-2 using C-2 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand (all by weight) complete. Make for Bitumene:- STP / Tikitar / Choksy Chemicals.

M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base, finished fair & even, etc complete all as specified and directed.

S&F Galvanized wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, conforming to IS, fixed with tinned tacks or galvanized wire staples, etc complete. Make:- Any reputed make conforming to IS, as approved by the GE.

M&L for PCC 1:3:6 type C0 using 12.5 mm graded stone aggregate as in filling of pressed steel door frame,bed block,hold fast etc complete all as specified and directed

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete

M & L for plain cement concrete type C2 1:3:6 (40mm garaded agg.) in surface channel and drains and the like, including use and waste of formwork, etc complete.

M & L for applying a coat of blown type bitumen at the rate of 1.50Kg per Sqm and binding with clean dry sand @ 0.05 Cum per Sqm. Make:- STP / Tikitar / Choksy Chemicals.

S&F Pressed steel frames size (105 x 60)mm for doors with one or more rebates including necessary fixing lugs, hings, lock strike plate, etc., complete as specified, etc complete. Make:- B A Enterprises / Multiwyn Industrial Corporation Doorwyn Industries / Modern Fabricator / Madhu Industries / Ajanta Ispat / ) Alusys.

S & F 1 mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, etc complete. Make:- TATA / Sail / JIndal.

S&F Butt hinges, medium weight cold rolled mild steel and fixed as 100mm long

S & F 150mm size mild steel pressed handles, oval type, stove enamelled black.

S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate. Make for item Nos. 40 to 42:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset

Steel ventilators with top hung shutter, conforming to IS, including hinges, steel peg stay,etc complete. . Make:- B A Enterprises / Multiwyn Industrial Corporation Doorwyn Industries / Modern Fabricator / Madhu Industries / Ajanta Ispat / ) Alusys.

S & F framed work such as grills gratings,etc with end of bars shouldered and/or riveted,or forged into spikes, framed guard bars,barred iron oors;ladders;framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for preparation of newly steel surface of any desciption over 10 cm width or grith and applying two coats of synthetic enamel paint, first quality, over a coat of Red oxide primer complete all as specified. Make:-Jotun India Pvt Ltd./ Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd. (Borolac) / Shalimar Paints Ltd

M&L Hardcore broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Screed Bed or Bedding Layer 15mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles complete all as specified and directed.

Rendering or bedding layer 10mm thick in cement Mortar 1:3 on Walls, etc., for fixing Tiles as Skirting, Dados, etc, complete all as specified and directed.

M&L for Machine cut kota stone slab flooring /dados 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete..

PATH M & L for 100mm thick cement concrete type B2, 1:2:4 (using 40mm graded aggregate) as in hard standing and making finished even and smooth without using extra cement incl all as specified and directed.

M & L sand filling under floor or below blocks incl watering and consolidation

M&L Machine pressed precast concrete interlocking paver blocks any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 Grade with grey cement and pigment, etc complete. Make:- Anjali Tiles / Ultra Tiles Pvt Ltd. / Terra Firma / Ecco Scope \ Mehtab Tiles / Nitco

M & L for Point wiring in concealed conduit with 1.5 Sqmm PVC insulated and unsheatheed single core multi stranded copper conductor, FRLS, ISI marked 1100 volts grade drawn through PVC conduit through walls (CONCEALED) fE9:E24or fixing of switches/sockets etc including 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable, FRLS, for earth continuity and connecting to common earth dolly complete all as specified and directed, for For one light point controlled by one switch. Make for cable:- Polycab / Havells India Ltd./ RR Kabel Ltd./ Finolex / Nicco / KEI / Gold Medal Electricals Pvt Ltd / MESCAB. Make for conduit:- Presto Plast / ) Finolex /) Indo American Electricals Ltd./ Kalinga Gold / Richa Cable Pvt Ltd :- Plaza / Precision.

All as per item No. 53 above but, For one socket point 5 Amps on the independent board

All as per item No. 53 above but, For one socket point 5 Amps on same board

All as per item no 53 here in before but for One 6 pin multi, socket outlet, 5/15 Amps , independent, with cables, FRLS 2.5 Sq mm of size including 2.5 Sqmm PVC insulated unsheathed stranded copper conductor cable, FRLS, for earth continuity and connecting to common earth dolly complete all as specified and directed :-

S&F Socket outlet 2 in 1, 5 pin, 6A,flush type Universal .

S & F Switch socket combination 2 in 1, 6 pin 5 /15 A 2 in 1 flush type Universal

S & F Switch socket combination 2 in 1, 5 pin 5 A 2 in 1 flush type Universal

S &F ceiling rose 3 pole/PVC/polycarbonate isoloted body

S &F switch piano flush type single pole, one way 6 Amps. Make for item nos. 57 to 61:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL/ C&S / Standard / Gold Medal Electricals Pvt Ltd.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, etc complete Make:- M/S Crompton Graves Consumer Electricals Ltd Cat No. CCS-103-20-30-SL-DP-NWH, or equivalent make in Havells India Ltd. / Surya Roshni Ltd./ Bajaj / Wipro / M/s Jaquar & Company Pvt. Ltd / GE / Gold medal Electricals Pvt Ltd./ Panasonic. / M/s Simoco Telecommunications(South Asia) Ltd

Supply and fixing LED SECURITY light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, etc complete. Make :- Cat No. LSTS-36-CDL-M of make M/S Crompton Graves Consumer Electricals Ltd / or equivalent in Havells India Ltd. / Surya Roshni Ltd./ (iv) Bajaj / Wipro / M/s Jaquar & Company Pvt. Ltd / ) GE / M/s Simoco Telecommunications(South Asia) Ltd / Goald medal Electricals Pvt Ltd./ Panasonic./M/s Simoco Telecommunications(South Asia) Ltd

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings. Make:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL/ C&S / Standard / Gold Medal Electricals Pvt Ltd.

S & F MCB, DB, S P & N, 240 Volt 12 way with double double door

S&F MCB SPN 6 to 32 Amp, 240 Volt

S&F MCB SP 6 to 32 Amp, 240 Volt. Make: - Legrand / L&T / Siemens / ) ABB / GE / Schnieder / Indo Asian (Brand :-OPTI POWER) / ) Havells India Ltd/ Gold Medal Electricals Pvt Ltd / HPL.

Earthing complete with GI earth plate electronic 600 x 600x 6mm buried directly in ground vertically to a depth of not less than 2.25 m below ground level with the top edge of earth plate at a depth of not less than 1.5 mtr below ground level connected to GI earth lead 4 mm dia by means of nuts bolts washers etc made out of galvanized iron and GI wire connected to main switch/DB board including necessary excavation and earth work PCC (1 3 6) type C1 using 20mm graded stone aggregate earth chamber 40mm thick RCC cover type B1 (1 2 4 ) B1 using 20mm graded stone aggregate 20mm dia GI medium grade protection pipe upto main switch board etc complete all as shown in electrical plate No 3 of MES Schedule Part I.

EXTERNAL ELECTRIFICATION M&L for cable in trenches or passing through pipe, XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable for 1100 Volts grade cross Sectional area 16 Sqmm 2 Core. Make:- Polycab / Havells India Ltd./ Gloster Cables Ltd. /KEI Industries Ltd / ASIAN Cable / ) Finolex / RR Kabel Ltd / Gold Medal electricals PVT Ltd.

M&L Sand Cushioning (dry) in Trenches for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 230 mm Spread thick -ness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, Punned thick-ness of Sand Cushioning only shall be Measured and Paid for.

S&F fly ash burnt brick, well burnt, laid breadth-wise along the length of Cable laid in Trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

M&L GI 'Light Grade' pipe of 40 mm Bore (dia) ‘Light Grade’ for protection of cable under road, etc complete. Make:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd.

Labour only for Horizontal Boring by Passing Protection Pipe up to 80 mm Bore (dia), under Road /Foot Path, not exc. 10.00 mtr in a Single Length, complete all as specified and as directed.

Note: In case doubling/duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment.

ROY ENTERPRISE

UNIVERSAL TRADING

M/S TRIVENI BUILDERS

M/S MODERN CONSTRUCTION

M/S SWAPAN KUMAR MONDAL

Ultimate Solution Company