SPECIAL REPAIR RENEWAL REPLACEMENT OF FURNITURE ITEMS AGAINST BER AT BSO UNDER GE WEST COLABA MUMBAI

Amount

CHAIR DINING OFFICERS DRG No : FD/E6/MAP-II/04 Dimenstion:- Overall size shall be 450x450x900mm. Description: - All wood work shall be first class hardwood. Leg of the chair will be 30x40mm (Front and Rear leg). Rail of all side will be 65x25mm. Stiffiner will be 20x25mm. 12 thick BWR phenol bounded plywood of Make : ARCHIDPLY/ GREEN PLY/ CENTURY/ KITPLY/ DURO PLY/ ANCHOR. 75mm thick with 32 density per cubic meter with febric on seat of 12 thick ply. Make of Foam : Sleep well/ Kurl-on/ Father Foam/ Dunlop.. The cushion cover should be of Make D'Decor/ Raymond/ Vimal . Back strips of the chair shall be 15x30mm. Finish:- Expose surface of teakwood shall be polish in natural wood colour. Make of French polish : Asian/ Shalimar/ Nerloc. Entire polish work shall be done in the presence of Engr-in-Charge at BSO yard of GE (W) Mumbai. Rest all as shown on drg.

BIN SOLIED LINEN MULTIPUEPOSE DRG NO : FD/E6/MAP-/09 Dimension : - Overall size shall be 1200mm x 750mm x 450mm made out of 18mm thick. Description : -Prelaminated particle board (make Century Ply/ Action tesa/ Greenply/Anchor) both side decorative of approved shade (Interior grade) including 4mm thick teakwood edging alround. leg 1200 x 750 x 75mm made out of 18 mm thick prelaminated particle board one side decorative of approved shade (Interior grade) Drawer of size 100mm x 400mm with handle Mild steel chromium plated on CP channel runner. Make : Godrej/ Harrison/ Mortice/Link/Plaza..Toe :- Hard rubber /PVC shoes shall be provided to the bottom of legs with screws. Finish:- Expose surface of teakwood shall be polish in natural wood colour. Make of French polish : Asion/ Shalimar/ Nerloc. Entire polish work shall be done in the presence of Engr-in-Charge at BSO yard of GE (W) Mumbai. Rest all as shown on drg.

BOOK CASE OPEN LARGE DRG NO : FD-356 Dimension: - Overall size shall be 1230 mm wide, 350 mm deep and 1720 mm high. Description: - Pre-laminated particle board make of century ply/Action tesa/Green ply/Anchor both side decorative of approved shed extrior grade including 4mm thick teak wood beading alround. Glass panel will be make of Atul/Modiguard/ Saint Gobin. All as per drawing. Finish: Expose surface of teakwood shall be polish in natural wood colour. Make of French polish : Asion/ Shalimar/ Nerloc. Entire polish work shall be done in the presence of Engr-in-Charge at BSO yard of GE (W) Mumbai. Rest all as shown on drg.

Description of Work / Item(s)

Amount

CHARPOY IP HARD TOP DRG NO : FD/E6/MAP-II/01 Dimenstion:- Overall size shall be 900X1980mm. Description:- Description as as under:- (i) Frame shall be made with 25x 65mm x 16 gauge MS tubes and legs shall be made with 32 x 32mm x 16 gauge MS tubes. The legs in short span shall be connected by 25 x25mm x16gauge MS pipe. MS tubes shall be machine cut and shall be conform to IS and shall be of TATA/JINDAL/SAIL/IISCO make. (ii) 06 Nos 25 x60 x6mm MS cleat shall be welded with the frame to support ply. (iii) 02 Nos 25 x25mm x16gauge MS tube stiffeners shall be provided in equidistance with the long runners of the frame to support ply. (iv) 12 mm thick commercial plywood of grade BWR conforming to IS : 303-1975 of make : GREEN PLY/ CENTURY/ KITPLY/ DURO PLY. Plywood shall be screwed with tubular frame as hard bed top. (v) MS plate of size 32x32x5mm thick shall be welded at bottom of legs and3mm thick rubber sheet shall be provided over the MS plate. (vi) All the steel surfaces shall be spray painted with two coats of synthetic enamel paint over a coat of read oxide Zinc chrome primer. (vii) All joints, welding and fixing shall be done in accordance with standard workmanship/specifications. Rest all as per drawing Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). The entire Charpoy shall be dual in Colour/ Shade as directed by Engg-in -Charge irrespective of what is shown on drg.Rest all as per drg and directed by Engg-in-Charge/GE.

CHAIR VARANDAH DRG NO : FD-359 Dimension :- Overall size shall be 460 x 600 x 760mm Description:-The legs on both sides of chair shall be of 20mm Dia mild Steel conduit of thickness as 1.6mm Make pipe shall be TATA/ JINDAL/SAIL/IISCO. The width at bottom of legs in sides shall be 600mm and at seat portion the width shall be 405mm. Canning shall be done with 4mm wide Nylon cane in mat pattern or as directed. Make of Cane : Shah/Premier/Ajoy/Garware/Maharastra Plastic Cane Industry. by Engr-In-Charge. All steel surface shall be pretreated with epoxy powder coated by 07 tank process and oven dried with following specifications Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). :- (a) Dry film thickness more than 45 microns. (b) Salt spray test to withstand more than 1000 hrs. (c) Adhension as per DN 53152 standards (d) Pencil scratch hardness more than 2H. Colour and tint of coating shall be approved by GE NOTE : Test certificates of powder coating is to be submitted. Rest all as shown on drawing.

LOCKER BED SIDE STEEL DRG NO : FD-1029 Dimension: - Overall size shall be 760mm long, 600mm wide and 1100 mm hing. Description: - All mild steel sheet shall be 1mm thick. Two legs shall be provided to lockers as shown on drawing and shall be of 1mm thick mild steel sheet top, sides back, front and shelves shal be of mild steel sheet of 1mm thick (Make of pipe TATA/ JINDAL/SAIL/IISCO). Two handles, chromium plated, 100mm long fixed to shutters. One hasp and staple 75mm long (Sample as apprvoed by GE) shall be fixed to shutters. The shuttters shall have the locking device also, All steel ironf surfaces exposed to view shall given two coats of enamel paint over a coat of primer paint. Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). The entire locker shall be dual in Colour/ Shade as directed by Engg-in -Charge irrespective of what is shown on drg. All as per drg and directed by Engg-in-Charge/GE.

CHAIR SCHOOL WITH HAND BOARD DRG NO : FD/E6/MAP-05 Dimension : - Overall size shall be 585x738mm. Description : - Chair school with Hand Board shall be manufactured all as per details shown in the drawing. All dimensions, shape and size shall be followed as per drawing. 25mm dia 18 gauge thick conduit pipe (Make of pipe TATA/ JINDAL/SAIL/IISCO) shall be used for leg frame. Hand board (Openable Type) shall be made of 18mm thick prelaminated particle board (both side laminated) exterior grade of make Century Ply/ Action tesa/ Greenply/Anchor all exposed edges shall be covered with 2 mm thick PVC edging duly fixed with adhesive through edge binding machine. Hand board shall be hinged at right hand side of chair arm duly screwed. 25mm dia MS rod inserted in 25mm dia conduit pipe and welded to the frame all as shown on the drawing. Basket below the seat shall be made of 5mm dia mild steel rod shall be provided as shown n the drawing. Seat and back shall be in one piece made of PVC with not less than 1.2kg. hand rubber/PVC shoe shall be provided to the bottom of each leg. Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). All as per drg and directed by Engg-in-Charge/GE.

RACK SHOE STEEL DRG NO : FD/E6/MAP/02 (R) Dimension: - Overall size shall be 700 mm long, 300 mm wide and 880 mm high. Description: - The legs of the shoe rack shall be of 25 mm dia MS Pipe of 16 gauage (Make of pipe TATA/ JINDAL/SAIL/IISCO). The five Shelves of the rack shoe shall be of 25 mm dia MS pipe of 16 Guage welded to legs. The shelves shall have 3 mm dia MS rod 9 nos in widthwise and 3 Nos in lengthwise welded to 25 mm dia shelf fame. Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). The entire Rack shall be dual in Colour/ Shade as directed by Engg-in -Charge irrespective of what is shown on drg.Rest all as per drg and directed by Engg-in-Charge/GE.

ALMIRAH LARGE STEEL 1/2H x 1/2S DRG NO : FD-1033 Dimension. Overall size shall be 920 mm long, 485mm wide and 1985mm high. Description: The base shall be 100m high. The base shall be made of two numbers mild steel sheet channels shape with ends covered and welded to bottom of almirah. Mild steel sheet/CRCA for channel shall be 1mm thick. the base channel shall be welded at 50mm from each end of 920mm length. Top, sides back, bottom and front of almirah shall be 1mm thick mild steel/CRCA sheet Make of Steel is TATA/ JINDAL/SAIL/IISCO. Two shelves shall be provided at 350mm and 700mm from bottom of almirah. A hanging rod 60mm from top shall be provided which shall be of 20mm dia steel chromium plated conduit pipe of wall thickness 1.25mm. Two sockets shall be provided at the end of hanging rod (Make : As sample approved by GE). Front shutters shall have two leaves. A steel chromium plated handle 100mm long shall be provided to shutters. A three way locking device shall be provided to front shutters. Handle and Lock shall be provided of Make : Godrej/ Harrison/ Mortice/Link/Plaza. Each leaf of front shutter shall be hinged with three numbers butt hinges 75mm long and shutters shall be side hung. All joints and welding, fixing sahll be done with standard workmanship. Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). The entire Almirah shall be dual in Colour/ Shade as directed by Engg-in -Charge irrespective of what is shown on drg.Rest all as per drg and directed by Engg-in-Charge/GE.

ALMIRAH LARGE STEEL WITH SHELVES DRG NO : FD-1031 Dimension: Overall size of almirah large steel is 1985mm high, 920mm wide and 485mm deep. Description: The MS sheet/CRCA Sheet used Top, sides back, bottom and front of almirah shall be 1mm thick mild steel/CRCA sheet Make of Steel is TATA/ JINDAL/SAIL/IISCO. Four shelves qually spaced of 1mm thick mils steel sheet shall be provided to make five compartments as shown in drg.The locker of the almirah shall be provided with safety handle and lock. Lock shall be provided of Make: Godrej/ Harrison/Mortice/Link/Plaza. The front two doors of the almirah shall be hammer tonded as directed by Engg-in-Charge/GE; shall be fixed with 75mm long hinges; three on each side with proper rivet and welding. The shelves shall be welded to sides and back of almirah internally as shown on drg.One chromium plated rod of 20mm dia shall be fixed at 75mm below the top for hanging purpose. Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). The entire Almirah shall be dual in Colour/ Shade as directed by Engg-in -Charge irrespective of what is shown on drg.Rest all as per drg and directed by Engg-in-Charge/GE.

FROM WITH OUT BACK STEEL DRG NO : FD-1027 Dimension: Overall size shall be 1525mm long, 300mm wide and 450mm high. Description: The width is 300mm at bottom and 255 mm at top of wooden plank legs shall be of 25mm mild steel square tube of wall thickness 1.6mm steel frame of legs shall be 300mm wide at bottom and 205mm wide a top. Legs at top shall be joined by steel stiffener of 25mm mild steel square tube of wall thickness 1.6mm and also at 50mm from bottom of legs. Legs shall be joined in center by a long stiffener made to shape and shall be of 25mm mild steel square tube of wall thickness 1.6mm Make of Steel is TATA/ JINDAL/SAIL/IISCO. Top shall be of 25mm thick particle board of make Century Ply/ Action tesa/ Greenply/Anchor with standard PVC edging al-round. Legs shall have hard rubber/ PVC toes or shoes at the bottom of legs. All steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer . Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). The entire Form with out back shall be dual in Colour/ Shade as directed by Engg-in -Charge irrespective of what is shown on drg.Rest all as per drg and directed by Engg-in-Charge/GE.

LADDER ALUMINIUM DRG NO : FD-1025 Dimension: Overall size of aluminium ladder shall be 2310mm long and 363.50 mm wide. The clear space between the stringers shal be 300mm. All as shown on drawing. Description: Overall size shall be 60mm x 31.75mm made in 'C' shape and 3.18mm thick aluminium shall be 2310mm long and joined together with aluminium rugns of aluminium conduit fluted pipe rungs ends bent to shape as shown on drawing. Eight alumimium rungs of aluminium conduit pipe of wall thickness not less tahn 2.43mm shall be equally spaced after leaving 150mm from bottom and top. Hard rubber cap/ shoes shall be provided to bottom and top of aluminium stringers. Make of Aluminium sections is JINDAL/ HINDALCO/ INDALCO/ MAHAVEER. Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). The entire ladder shall be dual in Colour/ Shade as directed by Engg-in -Charge irrespective of what is shown on drg.Rest all as per drg and directed by Engg-in-Charge/GE.

BOOK SHELF OPEN SMALL DRG NO : FD-69M DIMENSION: Overall size of shall be 915mm long, 305mm wide and 990mm high. DESCRIPTION: Sides and back shall be covered with 1mm thick mild/ CRCA steel sheet Slotted angle 25mm x 25mm x 3mm shall be provided at front back as shown on drawing. 3mm thick corners of 75mm x 75mm shall be fixed at front and back to the top bottom shelves. Four shelves including top and bottom shelves shall be provided equally to make three compartments. All welding shall be done as per trade practice and as directed by GE. All steel and iron surfaces shall be painted with two coats of enamel paint with spray machine over a coat of primer after preparation of steel furfaces. FINISH: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). The entire Book Case shall be dual in Colour/ Shade as directed by Engg-in -Charge irrespective of what is shown on drg.Rest all as per drg and directed by Engg-in-Charge/GE.

BOOK CASE OPEN LARGE STEEL DRG NO : FD-69M Dimension: Overall size of shall be 915mm long, 305mm wide and 1905mm high. Dscription: Side and back shall be covered with 1mm thick mild steel sheet slotted angle 25mm x 25mm x 3mm shall be provided at front and back as shown on drawing.3mm thick corners of 75mm x 75mm shall be fixed at front and back to the top and bottom shelves. Seven shelves including top and bottom shall provided equally to make six compartments. Make of Steel is TATA/ JINDAL/SAIL/IISCO. Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). The entire Book Case shall be dual in Colour/ Shade as directed by Engg-in -Charge irrespective of what is shown on drg.Rest all as per drg and directed by Engg-in-Charge/GE.

ALMIRAH SMALL STEEL 1/2H & 1/2S DRG NO : FD-1034 DIMENSION. Overall size shall be 765 mm long, 440mm wide and 1270mm high. DESCRIPTION: The base shall be made of two numbers mild steel channels shape with ends covered and welded to bottom of almirah, Mild steel sheet/CRCA for channel base shall be 1mm thick. The base channel shall be welded at 50mm from each end of 765mm length. Top, sides, back, bottom and front of almirah shall be of 1mm thick mild steel sheet/CRCA. A partition in the center of almirah shall be provided vertically with 1mm thick mild steel sheet. Three shelves, equally spaced, of 1mm thick mild steel sheet/CRCA shall be provided in one half towards left hand side. One top shelf on right hand side shall be provded matching with top shelf of left hand side with 1mm thick mild steel sheet/CRCA. 60mm below top shelf shall be provided with 20mm dia chromim plated steel conduit pipe of wall thickness 1.25mm and shall have sockets at both ends. Front shutter shall have two leaves. A steel chromium plated handle 100mm long shall be provided to shutter. A three way locking device shall be provided to front shutters. Lock shall be provided of Make : Godrej/ Harrison/ Mortice. Each leaf of front shutter shall have two hinges of 75mm long but hinged and shutters shall be side hung. All joints, welding and fixing shall be done in accordance with standard workmanship. FINISH: All metal /iron work shall be treated with dry powder coated in double shade after preparation surface. The entire almirah shall be dual in Colour/ Shade as directed by Engg-in -Charge irrespective of what is shown on drg.Rest all as per drg and directed by Engg-in-Charge/GE.

ALMIRAH MEDIUM/SMALL STEEL DRG NO : FD-1032 DIMENSION: Overall size shall be 1270 mm High, 765 mm wide and 440 mm deep. DESCRIPTION: - (a) It shall be made of 1mm thick mild steel sheet/CRCA sheet. All joints shall be rivted and welded thoroughly. (b) The Almirah shall have three shelves. (c) The Almirah shall have one spring action recessed handle 150 mm long with bulit in locking arrangement fitted to cut out space in one shutter with proper workmanship/normal handle 120/125 mm with three way locking system. Lock shall be provided of Make : Godrej/ Harrison/ Mortice. Rest all specifications and dimensions are as per drg. FINISH: - All metal /iron work shall be treated with dry powder coated in double shade after preparation surface.. The entire almirah shall be dual in Colour/ Shade as directed by Engg-in -Charge irrespective of what is shown on drg.Rest all as per drg and directed by Engg-in-Charge/GE.

CHAIR WRITING DRG NO : FD/E6/MAP/12 DESCRIPTION :The frame of the chair shall be of MS tubular frame powder coated ,cantilever type of size 25mmx10mm in section shall be painted with two coats of synthetic enamel paint of Make : Berger/ Nerolac/ Shalimar of black colour. Back form shall be designed with contoured lumber support for extra comfort.120mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping alround shall be provided at seat and back. Fabric Shall be of Make : D'Decor/Vivid Collection and Colour /Shade of fabric as directed by Engg-in-Charge. PU arms shall be of superior quality and reinforced with MS insert.It shall be scratch and wheather resistant. Chair Writing all as per drg shall be provided or of Make : Zuari/Godrej/Methodex simillar to the drg and specification shall be provided.

Apsara Industries (BID ID -3307114)

shiv shakti steel industries (BID ID -3307663)

AGRAWAL ASSOCIATES (BID ID -3306640)

KASTURILAL HARICHAND OHRI AND SONS (BID ID -3312861)

agarwal and company (BID ID -3307108)

ASHOKA FURNITURES (BID ID -3306226)

AGRAWAL ASSOCIATES (BID ID -3306640)

KASTURILAL HARICHAND OHRI AND SONS (BID ID -3312861)

shiv shakti steel industries (BID ID -3307663)

Apsara Industries (BID ID -3307114)

ASHOKA FURNITURES (BID ID -3306226)

agarwal and company (BID ID -3307108)