WELCOME MAINT TO DGRR MESS AT PRATAP CHOWK AND REPAIR/ MAINT WORKS AT DGNCC CAMP IN THE AOR OF AGE B/R-I UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each and removing to store complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm and n.exc 4.00 sqm each and removing to store complete all as specified.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 and including demolition of old brick/ PCC block masonry complete all as specified and directed.

Taking down cement or cement lime plaster , any description on brick or stone walls/concrete surface etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M & L for 15mm thick rendering in cement mortar 1:6 on fair face of stone walls/brick walls/ concrete surfaces and finished even and fair in any position etc complete all as specified and directed

M & L for 15mm thick rendering in cement mortar 1:4 on fair face of stone walls/brick walls/ concrete surfaces and finished even and fair in any position incl scafolding as required etc complete all as specified and as directed.

M & L Vitrified tiles full body / double charged 10mm thick (square/rectangular) matte / polished finish area of each tile not exceeding 0.36 sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick avg screed bed in CM 1:6 complete all as specified and directed.

M&L Virified Ceramic tiles in any shade 10 mm thick (square/rectangular) polished , area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, ( like as 1200x 600 mm) such as skirting, dados, verticale surface etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:3 complete all as specified and directed

M&L for vertified ceramic tiles 10 mm thick (Square/rectangular) polished area of each tiles not excedding 0.36 sqm in floor ets set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick rendering in CM (1:6) after dismantling of floor hearth or wall tiling (bedding but not backing) complete.

M&L for dismantling of old board of cupboard , kitchen cabinate etc as in any position and any type etc complete all as specified and directed

S&F Factory Made 18mm thick 100% Solid WPC (Wood polymer Composite) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, including provision of cabinet for keeping baskets/ drawers etc Material test certificate and authentication should be compulsory provided by the manufacturing company all as specified and directed. (Design and pattern as approved by GE).For WC/Bathroom/Toilet/ moduler Kitchen , cupboard & Cabinets.

S&F Factory Made 18mm thick 100% Solid WPC (Wood polymer Composite) Laminated Board (colour as approved by GE) of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade), Calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing hinges of required size with necessary full body threaded star headed counter sunk SS Screws (including provision of cabinet for keeping baskets/ drawers etc & hinges, modular handle less , G/C/J profile handls etc) Material test certificate and authentication should be compulsory provided by the manufacturing company : (Design and pattern as approved by GE).For WC/Bathroom/Toilet/ moduler Kitchen ,cupboard & Cabinets etc

BLANK

S & F for soft closure hinges with all fittings at mounting plate of premium quality, fixed in door/cup board shutters complete all as specified and as directed (Make : - Godrej/Hettich/IPSA and make as per approved make list and as approved by GE).

S&F 18 inch (45 CM) soft closure hinges telescopic Drawer Channel channels, rollers for smooth sliding of drawers modular kitchen etc complete all as specified and directed (Make : - Godrej/Hettich/IPSA and make as per approved make list and as approved by GE).

S&F Stainless steel basket (Perforated Cutlery Basket SS) of size 445mm x 485mm x 100mm made with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat art No 3575 or equivalent in IPSA/Hettich as approved by Engr-in-Charge).

S & F for Stainless steel thali/plate basket of size 445mm x 485mm x 200 mm made of min 4mmdia stainless steel wire of approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 3441or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).

S&F Stainless steel plain basket of size 445mm x 485mm x 200 mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 3892, or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door up to 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass/ wire mess shall be paid separately) Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.5 m height made of (big series) frame 112 x 52 mm & sash 42 x 66 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.00 Sqm to 2.50 Sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.20 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh hall be paid separately). (Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.)

Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass paneglazing bead of appropriate dimension (Area of window upto 1 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVCextruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixingframe the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass/ wire mess shall be paid separately) Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Providing and fixing factory made uPVC white colour frame 60 mm x 58 mm for fixed glass window/ opennings etc , made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, including glazing bead 35 mm x 20 mm all, including fixing with three track three panel door also etc as complete and as directed,( Note :- Glass shall be paid separately).

S & F 5.5 mm thick sheet glass , ordinary quality and glazed in square exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F 5 mm thick figured glass , pin head type and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F 8 mm thick Toughned glass fixed as in doors, windows, partitions and similar work including cutting to shape, drilling holes required icluding frosted on one side etc complete all as specified and directed

S & F plain gypsum board panel 12 mm thick on false ceiling ( including any design/ cob design as required & pattern as approved by GE) with and including necessary GI frame work for seamless ceiling used with ' T ' , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and after dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc including two coat of OBD over a coat of primer complete all as specified and directed.

M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including 10 mm thick screed bed/rendering in CM 1:4 and rounding to edge of granite as per required and after dismantling of existing granite of any description including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.etc completed all as specified and directed

S & F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, .etc completed all as specified and directed (Note: stainless steel butt hinges shall be paid separately under relevant item).

S & F 30 mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /cum Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, .etc completed all as specified and directed (Note: stainless steel butt hinges shall be paid separately under relevant item).

S&F 100mm long (size) butt hinges, stainless steel AISI 304 grade with brass/bronze hinge pin complete

S&F stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section, etc. complete all as specified and directed.

S&F 300mm long, stainless steel , sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, and fixing bolts and sliding bolts and fixed, complete all as specified.

S&F 150mm size stainless steel AISI 304 grade fancy type handle complete all as specified and directed.

S&F stainless steel AISI 304 grade floor door stopper with twin rubber shoes double door stopper 75 mm long complete all as specified and directed.

S & F in repair aluminium dia cast door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F Anodised Powder Coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. minimum thickness of powder coating 50 micron complete all as specified

S&F Anodised aluminium window glazed and gauzed shutter shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S & F Anodised aluminium door shutters, powder coating of any colour, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, including Glass / wiremesh/ partical board/ ACP board etc complete all as specified

S & F stainless steel wire cloth 0.36mm normal dia of wire and average with a aparture 1.40mm and fixed with tinned tacks or stainless steel wire staples as specified and directed.

S & F 3 mm thick sheet glass , ordinary quality in square exc 0.5 Sqm in each pane fixed complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Demolition of Reinforced cement Concrete in any description and any position n exc 15 cm thickness (below or above ground level)

M&L for reinforced cement concrete (nominal mix) as in shelves supported on walls using cement concrete type B-1 1:2:4 (20mm graded aggregate) complete.

Formwork to soffits of suspended slabs such as in shelves not exceeding 200mm thick rough finished flat surfaces of concrete complete all as spd and directed

Form work to edges of concrete flat exc 5 cm but n-exc 10cm wide for rough finished flat surfaces of concrete complete.

M&L TMT bar 10mm dia and over dia cut to length, bent to shape required incl cranking bending and binding with and including mild steel wire(annealed) not less then 0.9mm dia

M & L for preparation of old/new plastered surfaces of from internal surfaces of wall/ceilling by mechanical sander of berger paints or equivalent makes viz xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible, applying 2mm thick wall care putty, making surface even by sander etc and providing two coat of 1st quality acrylic Emulsion (ready mixed) having VOC content less than 50 gms/litre of approved manufacturer of required shade and colour complete as per manufacturer's specification and using roller brush over a coat of interior primer complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old/new decorated external surfaces of walls, pillers, cornices etc by scrapping down smoke soot, moulds, moss, efflorescent salts , trading oil and greasy spots and including cracks/holes in surface filling with white putty and applying a layer of 2mm water proof wall care putty, again sand papering thus making surface even and applying two coats of exterior acrylic emulsion paint premium quality including priming coat of exterior primer and Allow 6-8hrs to dry the surface for painting of subsequent quotes complete all as specified and as directed

M & L for applying one coat of synthetic enamel paint including preparation of old wooden surfaces of any description over 10 cm width or girth and complete all as Specified and directed.

Preparation of new Steel Surfaces of any description, not otherwise descri-bed,over 10cm width or girth applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Demolition of concrete (unreinforced) in Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M & L for 80 mm thick coloured factory made machine pressed precast cement concrete interlocking paver block any shape and size conforming to IS 15658-2006 M-40 grade (colour, design and pattern as approved by GE) over and including 50mm thick compacted bed of dry sand, complete all as specified and directed.

Providing and fixing "RAJSHRI" Brand factory made WPC railing combining WPC board/Fancy designer type grating and WPC frame 100% solid WPC (wood polymer composite) railing of required length and of 2' to 2.5' height , comprising of virgin PVC resin of K value 58-60 (Suspension Grade) , Calcium Carbonate and natural fibres (Wood Powders/rice husk//wheat husk) and non toxic additives, made from single extrusion process, WPC foam board with having minimum density 650kg/cbm and WPC frame having minimum density 780kg/cbm manufactured by "RAJSHRI" an ISO 9001-2015 certified Company, having good screw holding capacity (screw withdrawal strength of 2000N (Face) & 1100N (Edge) , Minimum comprising of 50N/mm2, Modules of elasticity 850N/mm2 and resistance of speed of flame of class A category with property of being termite/Borer free water /Moisture proof and fire resistance. For WPC railing WPC jali to be fixed with WPC frame of size 75x50mm with necessary supporting lengths at vertical as well as horizontal at wall frames to be fixed with 3"x3" GI 'L' or SS cleats to support vertical frame lengths including demolition /dismantling of existing RCC jallies with frames complete all as specified and as directed. (Make : Rajshree or equivalent as approved by GE) (Note : The said item shall be fixed for view cutter in any positions as requirement at site, the rate of item includes wpc frames )

Taking up or down 20 mm mm bore steel tubing and connections, position etc including cleaning for refixing or removal to store complete all as specified.

Taking up or down 15 mm mm bore steel tubing and connections from any position etc including cleaning for refixing or removal to store complete all as specified.

S&F 20 mm Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specifiedand cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girthetc complete all as specified and directed.

S&F 25 mm Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors and roofs including two storey bldg roof to bottom postion etc complete all as specified and as directed.

S&F 25 mm dia CPVC gate valves, with handle any type , fitted to the CPVC pipes, complete all as specified and as directed.

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S&F in repair fancy type chromium plated quarter turn brass angle valve type suitable for 15mm bore pipe complete all as specified "Make: Jaquar FLR 15053PM/ CERA F1001201/ Hindware F570043”

S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm.

S&F in repairs single lever WHB mixer of cast copper alloy , fancy type , chromium plated, and mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. (Make : Jaquar cat part No. ARI-CHR-39001B or equivalent in Marc/ Kohler).

S&F in repair 15mm Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange screwed both ends for iron pipe or for unions for 15mm bore steel tubing complete all as specified & directed. Make : Jaqaur Cat Part No. PRS-CHR-077 or equivalent in Marc/ Kohler

S& F in repair CP coated Brass Urinal spreader for fixing with 15 mm dia pipe. (Make: Jaquar/ Marc/ Kohler)

S & F in repair Vitreous China Urinal, full stall type Urinal With Fixing Accessories, white and fixed complete all as specified and directed. (Make : Jaquar cat part No.URS-WHT-13261 or equivalent in Marc/ Kohler)

S & F in repairs Vitreous china single Piece WC floor mounted With PP Soft Close Seat Cover, Hinges, with cistern & Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 360x730x740 mm, S Trap- 300 mm including connecetion to drain pipe with all fitting and fixture complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. SLS-WHT-6851S300PP or equivalent in Marc / Kohler )

S & F in reapir Vitreous chinaware table top wash hand basin (WHB) of complete including 32 mm dia chromium plated waste coupling, etc., complete all as specified and as directed. (Make : Jaquar Cat part No. -KUS-WHT-35935 or equivalent in Marc/ Kohler)

S&F in repairs Hand Shower (Health Faucet) with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified Make : Jaquar Cat part No. ALD-CHR-573 or equivalent in Marc/ Kohler)

S & F in repair 15 mm bore two way bib cock with wall flange cast copper alloy , fancy type , chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make : Jaqaur Cat Part No. ARI-39041 or equivalent in Marc/ Kohler

S & F in repair Towel Ring Round with Round Flange fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed. Make : Jaquar Cat part No. ACN-CHR-1121BN or equivalent in Marc/ Kohler

S&F in repairs of 32 mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, unions and cap and fixed, complete all as specified and directed.

S & F in repair Toilet paper Roll Holder with Stainless Steel Flap, and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed. Make : Jaquar Cat part No. ACN-CHR-1153S or equivalent in Marc/ Kohler

S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

S & F in replacement automatic soap dispenser of capacity 0.80 Ltr made of aluminum/ABS material, complete all as specified and directed. Make & Cat Part : Jaquar-Cat No. SDR-BLC-DJ0160AS or equivalent in Marc and Kohler.

S & F in replacement automatic Hand dryer white colour made of ABS material, Model dual flow plus complete all as specified and directed. Make & Cat Part : HDR-SLV-AK2030 or equivalent in Marc and Kohler.

S & F in replacement paper towel dispenser of capacity 600 towels made of 304SS grade , complete all as specified and directed. Make & Cat Part : Jaquar-Cat No. PTD-SAP-DT0106CS or equivalent in Marc and Kohler.

M&L for 100 mm dia of outlet PVC (SWR) floor trap plain with Cocroach trap grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including jointing with solvent cement complete all as specified and directed.

S & F 12 mm thick Toughned glass as in hinged doors / as in floor door closer door type, partitions, automatic doors. Sliding door, fixed portion , urinal partation etc and similar work including cutting to shape, drilling holes required etc complete all as specified and directed

S & F for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specifed and directed.

M&L WPC decorative wall panels/louvers 15 to 25 mm thick design pattern wood grain teak finished (colour and design as approved by GE) prelaminated inclusive of fixing on to wall including moulding end caps with L / U beading etc fixed with PVC sleeves and screws as required at site including dismantling of old wall panelling of any description, complete all as specified and as directed. Note : (i) Taking down existing any type of electric board sheet/ tube light/ LED / any fittings before fixing of panels and refixing the same after fixing the panels as required are included in the quoted rates by the contractor.

Taking down PVC (SWR) soil waste and vent pipes 100/75mm bore of any description with fittings and making good to disturbed complete all as specifed and directed.surfaces.

S & F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor completed all as specified and directed

S& F in repair 110 mm PVC (SWR) junction single (Single T) equal or unequal with access door

S & F in repair 110 mm dia PVC cowls

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling plain corrugated steel sheeting, any gauge, thickness, including , Nainital or similar pattern roof coverings sheet in any pattern & position of roof coverings.

S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws with bent to a curve (of any radius as per required) complete all as specified and directed

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed

M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of Oil bound distemper complete all as specified and directed.Make: BERGER/ASIAN PAINTS/ NEROLAC

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of Cement Based Paint complete all as specified and directed.

M & L for preparation of plastered, unplastered or pointing surfaces old decorated/un-decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of exterior acrylic emulsion paint of any tint all as per manufacturers instructions to achive desired finish at any height complete all as directed.

M & L for preparation of pathway/flooring duly brooming/scraping the existing surfaces and also removing the vegetable/glass over it (over Interlocking/Chequired tile/concrete surfaces) or any type of other surfaces old/new or in any position and applying two coats of floor paint of superior quality complete all as specified and as directed. (Make : Asian Paints/Berger/Indigo).

Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed.

S & F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front and back Face (wooden finish pattern), supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F Aluminium alloy powder coated standard hollow section for ventilotors as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed.

S&F Aluminium alloy powder coated windows sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double revated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.

S&F Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 1.80mm, shutter top section 47.62mm x 44.45mm x 1.80mm thick, shutter bottom section 114.30mm x 44.45mm x 1.80mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 1.80mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and as directed.

S & F for Factory made UPVC (white/Off white colour sliding window three track made out of extruded profiles with wall thickness of members as 2.3mm (1-0.2mm). Window profile with hollow section with multi chamber frame (60mm x 62mm) sash bars (42mm x 67mm). Sliding inter lock (one vertical length in each shutter 45.5mm x 28mm). Glazing head (24.5mm x 16mm) members will be mitred, cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water. Making arrangement for fixing of hardware, EPDM gaskets 1.2, 1-0.2mm thick galvanised steel frame (30mm x 21.50mm). Sash bars (30mm x 18mm) profile to be inserted in required profile frame and will be fixed to the wall with 8mm x 100mm long fastners. Hardware : Touch lock to be of Zinc alloy (white powder coated), Steel roller system including 5mm thick glazing with selelcted quality glass, Aluminium track on bottom rail to be of hree track sliding frame, wool pine for sliding sash and interlock, complete all as specified and as directed. (Area exceeding 2.00 Sqm). (Note:The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)

S & F factory made uPVC (white/off white) colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and with stainless steel wiremesh (0.36mm nominal dia of wire and average width of apreture 1.40mm. (Note:The unit rate quoted by contractor includes cost of stainless steel wiremesh and includes all other connected accessories. Net opening including frame will be measured for payment purpose, No extra payment will be paid for slider area, slider area frame and sliding system materials shall be included in the quoted rate) Make:-Okotech Aparno, H20 Solution, Fenesta or equavalent,

S & F for flush shutters 40 mm thick solid core constructions with block boardcore , ply wood face panels commercial type on both side complete all as specified and as directed.

S & F for 35mm thick second class hard wood Glazed and skelton shutters, open rebated and prepared to receive wiremesh, gauge, etc (without sashbars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing wiremess, etc, sizes of members of shutters as specified in SSR Part -, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.

S & F Aluminum Anodised 150mm size barrel tower bolt complete all as specified and as directed.

S & F 150mm size aluminum adodised handles complete all as specified and as directed.

S & F 100mm size Mild steel butt hinges fixing with screws to Iron door frame complete all as specified.

S & F Mild steel 150mm size barrel tower bolt complete all as specified and as directed.

S & F 150mm size Mild steel handles complete all as specified and as directed.

S & F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Eacavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.

Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed.

Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in surface channels complete.

M & L for 150 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with collars complete laid in trenches and tested complete all as directed.

M & L for 200 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with collars complete laid in trenches and tested complete all as directed.

M & L for 300 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with collars complete laid in trenches and tested complete all as directed.

M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 150 mm bore incl forming cradles complte all as specified and directed.

M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 200 mm bore incl forming cradles complte all as specified and directed.

M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 300 mm bore incl forming cradles complte all as specified and directed.

M & L for Plain Cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in lintels up to 1.5 metre clear span, bed blocks, copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork, complete all as directed.

S & F for Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592 of any shape and size as per requirement at site and as directed after dismantling of existing manhole covers of any type complete all as specified and as directed.

M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position including demolition of existing PCC complete all as specified and as directed.

M & L for Coloured Chequered cement concrete tiles 25cm x 25cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed in CM 1:6 after dismantling of existing chequired tiles complete all as specieied and as directed.

M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 50 mm thick, M-40 Grade with grey cement and pigment laid dry in floor/path after dismantling of existing interlocking tiles complete.

S & F E-board ceiling of size 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture's instruction including taking down the existing false ceiling of any type with frame work complete all as specified and directed.

S & F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of Plain or corrugated AC Sheet, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S & F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing corrugated or semi corrugated AC Sheet , nainital or similar pattern as in roof coverings complete all as specified and as directed.

Demolition and breaking up drains pipe (SGSW, AC or reinforced concrete in cement mortar) and removing debris from site and depositing where directed n exc 1 Km from site for bore of pipe 150 - 300mm.

Taking down carefully copper/aluminium point wiring with or without conduit (light, fan, socket or power) complete, excluding any type of light fittings and fixture and making good to the disturbed surface of walls, floors roof etc all as specified and directed. (Note : Light fittings of any type and size including fixture such as switches, ceiling roses, pendents, regulators, sockets, etc of taken down/ dismantled if any alongwith point wiring shall be measured and paid separately as supply & fixing in repair under relevent item of this BoQ and credit for the same has been taken in Sch of Credit)

Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC conduit ISI marked of size 20 mm dia medium grade and fittings such as tees, bends, elbow, and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly including Metal Flush Box, Cover plate with frame complete and cutting chases & making good in CM 1:3 to match with existing surface all as directed.

(a) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

(b) one socket outlet point 5 amps on the same board.

(c) one socket outlet point 5 amps on the independent board.

All as per Srl Item No 137 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for independent point.

S&F in replacement Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

S&F in replacement Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed.

S&F in replacement Modular switch 16 Amp, 1 way, 1 module size complete all as directed.

S&F in replacement Modular socket 16 Amp multipurpose shuttered type, 2 module size with indicator lamp complete all as directed.

S&F in replacement Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

S&F in replacement LED ceiling light fitting in round shape 15 Watt 220 volts recessed/surface type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete.

M&L Sub main wiring with 2 run of 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC concealed conduit 25 mm dia medium grade with all fittings with and including 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting chases and making good disturbed surface in CM 1:3 to match with existing surface complete all as directed.

M&L Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC concealed conduit 25 mm dia medium grade with all fittings with and including 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting chases and making good disturbed surface in CM 1:3 to match with existing surface complete all as directed.

M&L Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC concealed conduit 25 mm dia medium grade with all fittings with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting chases and making good disturbed surface in CM 1:3 to match with existing surface complete all as directed.

M&L Sub main wiring with 2 run of 10 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC concealed conduit 25 mm dia medium grade with all fittings with and including 10 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting chases and making good disturbed surface in CM 1:3 to match with existing surface complete all as directed.

Supply and fixing in replacement of Wall Mounted Fan 400 mm sweep plastic body type including making all electric connections and depositing the old u/s to MES store yard complete all as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as directed and depositing the old U/s item to MES store yard.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm and depositing the old U/s item to MES store yard.

S & F of rigid non metallic PVC conduit 25mm dia inclusive of all tees, bends, elbow, reducers, bell mouth tube ends and fixing accessories such as couplers lock nuts saddles, pipe hook etc complete including cutting chases in wall and making good in CM 1:3 to match with existing complete all as specified and as directed.

Supply and fix in replacement decorative wall/mirror light made up of high grade engineering plastic material suitable for 9 Watt LED lamp B22 base.

Supply and fixing of Flexible LED tubelar light cool/warm white and making all electric connection complete all as directed.

Supply and fixing in replacement of adopter AC to DC sutable for tubelar LED light complete all as directed.

Supply and fixing in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. Note:- MCCB & MCBs will be measured and paid separately

S&F in replacement MCCB 3 Pole, 100 Amp with breaking capacity 16 KA suitable for 415 volts AC supply, with over load and short circuit protection complete all as specified.

S & F of MCB DB conforming to IP 43 - IK 09 with double door , SPN 8 way complete with din rail Neutral and earthing bar after taking out the oldunserviceable DBs connection and making good the disturbed surfaces complete all as specified and as directed.

S&F in replacement MCB SP, B Curve type, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as directed.

S&F in replacement MCB SP, B Curve type, 10 KA, 40 Amp, with over load and short circuit protection complete all as directed.

S&F in replacement MCB SPN B Curve type, 10 KA, 40 to 63 Amp, with over load and short circuit protection complete all as directed.

Supply and fix in replacement of Modular AC 25 Amp SP mini MCB, 230 Volts, 50 Hz suitable for module sheet complete all as specified and as directed.

Supply and fix in replacement of 10 Watt LED Bollard light fitting pressure die cast powder coated housing with PC diffuser. Efficient high outpur LED with IP 66 protection all specified and as directed.

Supply and fix Automatic Hand drier hot air dispenser with infrared sensor metal body with all accessories including all electrical connection complete all as specified and as directed.

S&F in replacement electric water heater of capacity 25 litre, vertical storage type, steel inner tank with glass linen 5 star rating, withstand 8 bar pressure complete with all accessories such as heating element, pressure relief check safety valve, thermostat, connection piece, 3 core wire with plug etc and deposit the old unsv to MES store yard complete all as specified and as directed.

S&F Steel fastneer of 4" long and 8mm dia with Nuts & washer complete all as specified and as directed.

Supply and fixing of steel wired connection 600mm long and C P brass adopter 15 mm dia with washer for hot and cold water from geyser and to withstand 8 bar pressure of water complete all as specified and as directed.

S & F in replacement of Energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.

S&F in replacement of LED bulk head fitting 10W with inbuilt driver complete all as specified and directed.

S&F in replacement of street light fitting bracket, 1mtr ling made out of galvanized iron pipe of 25mm dia size light grade complete with nit, bolts, complete all as directed.

S&F in replacement of LED flood light 150 Watt, 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, thermal management in multiple optics complete with IP 65/66 protection complete.

S&F in replacement of DOL Starter suitable for upto 1 HP fountain pump, current rating 2-3Amp, commissioning and testing complete with IP 65/66 protection all as directed.

M&L for Earthing complete with galvanised steel plate electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level , connected to and including galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, washers protected by and including 15 mm bore GI Pipe “light grade” and connected to main test point as directed and including concrete pit in PCC(1:3:6) type C1 precast RCC M-25 (design mix) precast cover slab (54 x 54 x 5 cm) duly reinforced with and including 8 mm dia TMT steel bars @ 150 mm C/C both way, one lifting handle made of 8 mm dia TMT bar embedded in precast cover slab, funnel, wire mesh, 20 mm bore GI medium grade pipe for watering, charcoal and salt in alternate layers, including necessary excavation and earth work any type of soil complete all as specified and shown in electrical plate No. 5 of SSR Part-I including testing on completion complete all as specified and directed.

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fix in replacement LED fountain light 4x2 Watt suitable for underwater, installation and testing complete all as directed.

Supply and fix in replacement fan regulator 2 module complete all as directed.

Akhil Enterprises (BID ID -3099868)

M/s Shubh Enterprises (BID ID -3099822)

M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3096748)

POONAM ENTERPRISES (BID ID -3100133)

V M CONSTRUCTION (BID ID -3096644)