Loading
Loading…
Loading…
Tender Value
₹65.5 L
EMD Value
₹1.3 L
Closing Date
21 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
CIVIL
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Refer details in tender document).
Definition of Similar nature of Work:- ("Any Civil work other than EOT Track, Horticulture, Sanitation & P.Way work")
16 conditions · 3 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Quoted Rates shall be inclusive of all statutory taxes like GST, building cess, any allowance, license fee, royalty charges etc. as legally leviable by State, Central Government and/or any other local body/authority.
The tenderer(s) should deposit payment of EPF/ESI with the authority concerned for the preceding month of the wages month irrespective of number of workers and upload on the IR Shramik Kalyan Portal.
To assist in the examination, evaluation & comparison and prequalification of the Tender, the Railway may, at its discretion, ask any Bidder for a clarification of its Bid. Any clarification submitted by a Bidder that is not in response to a request by the Railway shall not be entertained or considered. The Railway request for clarification and the response of the bidder in this regard shall be in writing. However, if a Bidder does not provide clarification of its bid by the date and time communicated in the Railway request for clarification, the bid shall be evaluated as per the documents submitted along with the bid.
Tenderer should comply with the provision of EPF&ESI Scheme as modified from time to time and should registered themselves with concerned authority or submit registration issued by authority concerned within 30 days from the date of issue of (LOA), otherwise no payment will be released.
Renovation of officer's rest house and repair to kitchen of officer's club in Col-I area PLW/PTA for the year 2025-26.
T-34-2025-26
T-34-2025-26
Open
Works - General
12 Months
Patiala, Punjab
₹0
₹1.3 L
21 Apr 2026
30 Mar 2026
7 Apr 2026
72 items across 2 schedules · ₹6,04,317.75 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 5 | 6,326.05 | 31,630.25 |
| 2 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 2 | 9,375.2 | 18,750.4 |
| 3 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 4 | 6,658.25 | 26,633 |
| 4 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 10 | 8,288.35 | 82,883.5 |
| 5 | Granite Stone of approved shade | Sqm | 30 | 3,542.85 | 1,06,285.5 |
| 6 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 400 | 1,063.45 | 4,25,380 |
| 7 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 30 | 2,015.75 | 60,472.5 |
| 8 | Kiln seasoned and chemically treated hollock wood | Sqm | 25 | 2,834.6 | 70,865 |
| 9 | With 12 mm mild steel U beading | Sqm | 90 | 812.4 | 73,116 |
| 10 | 200x10 mm | Each | 60 | 300.55 | 18,033 |
| 11 | 125 mm | Each | 150 | 205.1 | 30,765 |
| 12 | 250x16 mm | Each | 20 | 234.9 | 4,698 |
| 13 | 150x10 mm | Each | 400 | 75.55 | 30,220 |
| 14 | Twin rubber stopper | Each | 40 | 62.25 | 2,490 |
| 15 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 50 | 111.95 | 5,597.5 |
| 16 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Kg | 250 | 114.65 | 28,662.5 |
| 17 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 100 | 612.25 | 61,225 |
| 18 | Ordinary cement without any pigment | Sqm | 80 | 928.5 | 74,280 |
| 19 | 25 mm thick | Sqm | 15 | 1,706.6 | 25,599 |
| 20 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | Sqm | 10 | 2,038.55 | 20,385.5 |
| 21 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. | Sqm | 350 | 1,225.1 | 4,28,785 |
| 22 | Size of Tile 600x600 mm | Sqm | 150 | 1,416.65 | 2,12,497.5 |
| 23 | Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red | Sqm | 30 | 2,677.9 | 80,337 |
| 24 | 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. | Sqm | 135 | 1,247.5 | 1,68,412.5 |
| 25 | 1:6 (1 cement: 6 fine sand) | Sqm | 400 | 282 | 1,12,800 |
| 26 | Two or more coats on new work | Sqm | 1200 | 131.45 | 1,57,740 |
| 27 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 1500 | 123.85 | 1,85,775 |
| 28 | Two coats | Sqm | 4000 | 116.05 | 4,64,200 |
| 29 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre | Sqm | 3500 | 64.45 | 2,25,575 |
| 30 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | Sqm | 3500 | 16.35 | 57,225 |
| 31 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface | Sqm | 3500 | 111.6 | 3,90,600 |
| 32 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) | cum | 20 | 1,239.6 | 24,792 |
| 33 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 5 | 2,928.1 | 14,640.5 |
| 34 | In cement mortar | cum | 72 | 1,698.45 | 1,22,288.4 |
| 35 | Of area 3 sq. metres and below | Each | 100 | 302.7 | 30,270 |
| 36 | Of area 3 sq. metres and below | Each | 22 | 118.3 | 2,602.6 |
| 37 | For thickness of tiles 10 mm to 25 mm | Sqm | 900 | 60.5 | 54,450 |
| 38 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 10 | 219.35 | 2,193.5 |
| 39 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | Sqm | 200 | 951 | 1,90,200 |
| 40 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 3 | 5,781.35 | 17,344.05 |
| 41 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 11 | 6,941.3 | 76,354.3 |
| 42 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer | Each | 17 | 3,459.05 | 58,803.85 |
| 43 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | Each | 17 | 1,500.05 | 25,500.85 |
| 44 | 510x1040 mm bowl depth 250 mm | Each | 5 | 6,008.45 | 30,042.25 |
| 45 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia | Each | 11 | 6,119.15 | 67,310.65 |
| 46 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 11 | 1,411.15 | 15,522.65 |
| 47 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 | Metre | 40 | 1,077.4 | 43,096 |
| 48 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989 | Metre | 50 | 1,042.1 | 52,105 |
| 49 | Sand cast iron S&S as per IS : 3989 | Each | 22 | 439.75 | 9,674.5 |
| 50 | Sand cast iron S&S as per IS - 3989 | Each | 25 | 298.2 | 7,455 |
| 51 | 100 mm | Each | 25 | 549.65 | 13,741.25 |
| 52 | 75 mm | Each | 30 | 466.4 | 13,992 |
| 53 | Sand Cast Iron S&S as per IS- 1729 | Each | 25 | 1,296.4 | 32,410 |
| 54 | 20 mm nominal dia Pipes | Metre | 50 | 513.75 | 25,687.5 |
| 55 | 25 mm nominal dia Pipes | Metre | 200 | 626.05 | 1,25,210 |
| 56 | 15 mm nominal bore | Each | 80 | 85.2 | 6,816 |
| 57 | 150 mm diameter | Each | 11 | 190.1 | 2,091.1 |
| 58 | 15 mm nominal bore | Each | 11 | 262.3 | 2,885.3 |
| 59 | 20 mm nominal bore | Each | 11 | 289.05 | 3,179.55 |
| 60 | 15 mm nominal bore | Each | 35 | 715.05 | 25,026.75 |
| 61 | 15 mm nominal bore | Each | 11 | 594.75 | 6,542.25 |
| 62 | 15mm nominal bore | Each | 80 | 500.35 | 40,028 |
| 63 | 100 mm nominal dia | Each | 45 | 33.2 | 1,494 |
| 64 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | 11 | 96.75 | 1,064.25 |
| 65 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 560 | 466.3 | 2,61,128 |
| 66 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 850 | 564.8 | 4,80,080 |
| 67 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 91 | 1,019.8 | 92,801.8 |
| 68 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). | Sqm | 12 | 4,540.7 | 54,488.4 |
| — | 1000.00 | 544.4 | 5,44,400 | ||
| — | 25.00 | 2,396.71 | 59,917.75 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ACS-1to11merged_merged_compressed-compressed1.pdf
ATTACHMENT
CECIRCULAR630merged.pdf
ATTACHMENT
SpecialCond.pdf
ATTACHMENT
Tdoc.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .