Karnataka

Active

Works

Lift Irrigation Scheme

Construction of substation and commissioning of Mugalolli LIS Site-2 at Mugalolli Village of Bagalkote Taluk and Dist (Under 4702 LIS) for 2025-26

Minor Irrigation Department

Minor Irrigation Division Vijayapura | Vijayapur, Karnataka

Amount: ₹4.5 CrCloses: 11 Sept 2026Due tomorrow

Timeline

Published3 Sept 2026
Pre-Bid Meeting8 Sept 2026
Closes11 Sept 2026
Bid Opening15 Sept 2026

Tender Value

₹4.5 Cr

EMD Value

₹6.8 L

Closing Date

11 Sept 2026, 5:29 pmDue tomorrow

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

MI Office

Office Number

Work Description

Construction of substation and commissioning of Mugalolli LIS Site-2 at Mugalolli Village of Bagalkote Taluk and Dist (Under 4702 LIS) for 2025-26

Tender Information

Tender ID

MI/2025-26/LI/WORK_INDENT10770/CALL-5

Reference Number

MI/2025-26/LI/WORK_INDENT10770/CALL-5

Tender Type

Open

Product Category

Lift Irrigation Scheme

Form of Contract

Two Tender Document System(Two Cover)

Location

Minor Irrigation Division Vijayapura

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredAnnual Turnover Certificate with UDIN certified by CA

RequiredRegistration Certificate Class II & above.Civil/Electrical License certificate

RequiredWork Done Certificate for similar nature of work and quantity wise

RequiredBankers Certificate

RequiredBid Capacity as per bid document

RequiredGST Registration Certificate

RequiredDetails of Existing Commitments and ongoing works as per bid document

RequiredLatest Address and contact number for communication to be furnished.

RequiredVehicle Registration certificate and lease/hire agreement copy

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders.The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The Tender are invited as per Standard Tender bid document KW-4

Conditional Tenders are liable to be rejected .The competent authority reserves the right to accept or reject any or all the tenders without assigning any reasons whatsoever.

All relevant documents as per the KW-4 need to be uploaded while submitting bid in general documents provision in Kppp portal

The contractor has make his own arrangements for procurement of all the required materials and the materials so procured shall confirm to the relevant IS Specifications or Equivalent and obtain necessary quality certificate from authorised quality control.

The Contractor is fully responsible for the Equipment / Material until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning.The Contractor is responsible for the proper maintenance of equipment / material as well as protection of the same against theft, elements of nature, damages etc., while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgement in writing

All the documents required as per technical qualification criteria needed to be uploaded in Original or Attested by any official not below the rank of Executive Engineer or Notary

The Contractors should submit all the Documents as uploaded in Original or duly attested by a Notary/an officer not below the rank of an Executive Engineer on or before opening of Technical Bid as Notified

Name, address, and telephone, telex, and fax numbers of the contractor is to be provided .

The contractor has to furnish Additional security deposit for unbalance tender as per clause 25.1 of ITT, to an amount equal to difference in contract price and amount put to tender , in addition to 5 % performance guarantee (in Any of the form prescribed may be deducted in running bills for RESERVED category contractors)

During the execution of works, if any minor minerals are required, contractors have to abide by the Karnataka Minor Mineral Concession Rules 1994(as amended up to date). As per the prevailing rules, for any use of minor minerals, the contractor has to submit the Mineral Dispatch Permit obtained from Mines and Geology Department. If Mineral Dispatch Permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty and DMF contribution as per Karnataka Minor Mineral Concession Rules 1994 (as amended from time to time ) will be deducted from the contractors bill at the time of payment

The Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State) otherwise it shall be issued/ counter signed by Superintending Engineer (if work is done in other states)

For Works estimate cost more than Rs. 100.00 Lakhs For Quality control tests of materials the contractor should provide required Rammer with Core Cutter, Balance and Moisture Meter, size 15x15x15 cms Mould Sets and for testing of sand and metal set of required mesh etc.

The tenderer shall also disclose if there are any bankruptcy proceedings against him

GO Copy enclosed in e-procurement regarding restrictions on Public Procurement from Bidders of certain countries as per Government order No.FD/455/EXP-12/2020, Bengaluru, Dated: 25-08-2020 The Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State) otherwise it shall be issued/counter signed by Superintending Engineer (if the work is done in other states)

The intending bidder firm/company are advised to visit the work site before submission of tenders

Tenderers who meet the specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value

The Tenderer has to quote his rate by excluding GST. However contract will be concluded for the AMOUNT (Exclusive of GST) but Applicable GST will be paid extra prevailing at the time of execution. If the GST rates are revised during the contract period, the Tenderer/Employer has to accept the revised GST rates for making payment/recovery.

Transportation charges from the site of work to Q.C.Lab of all the samples collected for testing should borne by the contractor himself

The rates of items are inclusive of cost of materials, labour charges, HOM of machinery, all lead and lifts and all other charges to complete the work successfully as per specifications and as directed by engineer in charge of work

The Drawings uploaded are For Tender Purpose only

Latest copy of the Income Tax Clearance Certificate , PAN and TAN Nos. to be uploaded.

Bidder has to submit the recently issued work done certificate (with in 6 month from the last date of bid submission) from the competent authority for the work executed in last 5 years. (Refer tender clause ITT 3.2(b))

Corrigendum will be published in web site for all modifications/corrections if any.

As per the Karnataka building and other construction workers welfare cess act 1996 1 % of the bill amount will be deducted from the bill.

While uploading the bid document in the E portal the blanks in the bid document should be filled up with appropriate details wherever necessary.

The Defects liability period is 1 years. The contractor is liable to rectify the defects in the work done up to a period of 1 Year from the date of completion of the work at his cost.

Failure of the successful tenderer to comply with the requirements of sub clause 29.1 shall constitute sufficient grounds for cancellation of the award contract and action will be taken as per GO Aae 675 veccha-12/2020, Bangalore Dt: 22.12.2020.

All materials like steel, cement etc., required for the above work should be procured by the contractor only at his own cost. And these materials will have to be got tested by the competent authority before put to use and certificate shall be submitted

As per Government Order No.LD 300LET 2006, Bangalore, dated, 18.1.2007,1% of the amount of the cost of the work executed will be deducted from the contractors bill every time towards collection of Cess under the building and other Construction Workers Welfare Cess Act 1996

As a third party, vigilance cell which is working under Major Irrigation is now included in Minor Irrigation and Ground Water Development Department, Vigilance cell has empowered to visit the working site often and often without any prior intimation to check the quality and quantity at any stage till completion. Any lapses with respect to quality and quantity of work, losses, the contractor is held responsible. Please Note.

The contractor should mention their recent correct postal address and mail address in declaration forms

The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the work listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

The tender processing charges paid by the bidder/ firm/ company are not refundable even if the tenders are cancelled.

If any of the dates mentioned above happens to be a general holiday, the next working day holds good.

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

List of Financial Resources with Certificates

Past Experience

Each Tenderer in his name should have in the last five years period (2021-22 to 2025-26) satisfactorily completed (at least 50% of the contract value), as prime contractor, at least one similar work such as Construction of LIS Work with 33KV/11KV Sub station/ Construction of 33KV/11KV Sub station along with Commissioning of the work to the extent of Rs. 225.89 Lakhs

Work Done Certificate

Executed in any one year, for a continuous period of 12 Month, in the last five years period (2021-22 to 2025-26) Minimum quantities of work: Earthwork & Embankment-8765 Cum, CONCRETE WORK (including PCC, RCC & PSC) -644.00 Cum, Steel-6.60 Tonne, Power Transformer - 1 No

Work Done Certificate

Should have been registered as Class-II & above Civil/Electrical License certificate

Others -- License certificate

Capabilities of Vendor

Liquid assets and availability of credit facilities.,Rs.176.18 Lakhs (Credit lines/Letter of credit / Certificate by nationalised banks for meeting the fund requirement etc) (Type Capabilities of Vendor) ( Certificate in the format prescribed in Qualification information of Bid documents )

Line of Credit

Each Tenderer should further demonstrate: (a) Availability by owning at least 50% of the Required/specifed key and critical equipment for this work and (b) the remaining 50% can be deployed on lease/ hire basis for all works provided the relevant documents (commitment agreements etc.,) for availability for this work are furnished. Hydraulic Excavator - 01, Lorry/Tipper - 01, Self loading Concrete Transit Mixer - 01

Others -- RCs or Invoices for owned Machinery/ Lease Agreement along with RCs or Invoices for hired Machinery

Financial Status

Each Tenderer in his name should have in the last five years period (2021-22 to 2025-26) achieved in at least two financial years an average annual financial turnover of Rs.903.54 Lakhs

Audited CA Certificate of Annual Turnover

Tenderers who meet the above specifed minimum qualifying criteria, will only be qualifed,if their available tender capacity is more than the total tender value.The available tender capacity will be calculated as under: Assessed available tender capacity is A into N into 1.5 minus B where A is equal to Maximum value of civil engineering works executed in any Two year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N is equal to Number of years prescribed for completion of the works for which tenders are invited is equal to 11/12, B is equal to Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 11 months (period of completion of the works for which Tenders are invited

Others -- Bid Capacity

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹6.8 L

Important Dates

Last Activity

4 Sept 2026

Published

3 Sept 2026

Bid Opening

15 Sept 2026

Download Ends

10 Sept 2026

Pre-Bid Meeting

8 Sept 2026

BOQ Preview

•

Construction of substation and commissioning of Mugalolli LIS Site-2 at Mugalolli Village of Bagalkot Taluk and Dist (Balance work) (Under 4702 LIS) for 2025-26

•

Supplying, errection, testing and commissioning of POWER TRANSFORMER : Power Transformer Copper winding, 5 MVA, 33/6.6 KV Delta / Star, Dynll, 3 Ph, 50Hz, core type winding with OLTC, RTCC panel, etc,...

•

Supplying, errection, testing and commissioning : Supply and installation of Auxiliary transformer 6.6 KV / 433 Volts 160 KVA copper wound, insulating oil filled with all accessories complete as per s...

•

Supplying, errection, testing and commissioning of 33 kV, 25 kA class, SF-6/Vaccum Circuit Breaker with terminal connector suitable for Al. Tube/conductor with spring operating mechanism and mounting ...

•

Supplying, errection, testing and commissioning of 33 kV, 800 A, 25 kA Isolators, double break with manual operating mechanism, with solid core insulator, terminal connector suitable for Al. tube/cond...

•

Supplying, errection, testing and commissioning of Oil filled Current Transformer 0.2s class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technica...

•

Supplying, errection, testing and commissioning of Oil filled voltageTransformer 0.2 class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical ...

•

Supplying, errection, testing and commissioning of 30 kV 10kA Lightning Arrester Normal Duty polymeric Discharge Class -2. etc., completed with all leads and lifts, loading and unlaoding as directed b...

•

Supplying, errection, testing and commissioning of 33 kV Sub-station : Simplex 110 V DC compatible to SCADA complete as per technical specification. 33 kV Panel for Overhead Line etc., completed with ...

•

Supplying, errection, testing and commissioning of33 kV Sub-station : Simplex 110 V DC compatible to SCADA complete as per technical specification. 33 kV Panel for for Transformer. etc., completed wit...

•

Fabrication, galvanising and supply of High Tensile Steel tower materials i) Station structures Tower - 3T1 with peak (0.365 MT per structure*6) including cost of all material, machinery, labour, tran...

•

Fabrication, galvanising and supply of High Tensile Steel tower materials ii)Supply, Erection of Station structures Beam - 3B1 (6M Width) (0.194 MT per structure*3) including cost of all material, mac...

•

Fabrication, galvanising and supply of Mild Steel tower materials iii)) 33 kV Isolators ai) Live point height 3750 mm Note: Three numbers of flexible terminal connectors per Isolators suitable for 63m...

•

Fabrication, galvanising and supply of Mild Steel tower materials iv)) Live point height 3750 mm (0.25*3 MT per structure) Including cost of all material, machinery, labour, transportation, taxes etc....

•

Fabrication, galvanising and supply of Mild Steel tower materials v)) Current Transformers for 33 kV CTs (0.152 MT per structure*6) Including cost of all material, machinery, labour, transportation, t...

•

Fabrication, galvanising and supply of Mild Steel tower materials vi) VoltageTransformers for 33 kV PTs (0.152 MT per structure*3) Including cost of all material, machinery, labour, transportation, ta...

•

Fabrication, galvanising and supply of Mild Steel tower materials vii)Supply, Erection of Mounting Structures of LA//PI(0.075*9 MT) Including cost of all material, machinery, labour, transportation, t...

•

Supply , Erection of 7/ 3.65mm GI wire for Ground conductor, 33 kV Side including cost of all material, machinery, labour, transportation, taxes etc., completed with all leads and lifts, loading and u...

•

Providing drawing and fixing ACSR Conductor LYNX ACSR--33 KV Side. etc., completed with all leads and lifts, loading and unlaoding as directed by Engineer-in charge of work.

•

Supply Formation of Main/Cross bus with single LYNX (Only erection portion) including cost of all material, machinery, labour,transportation, taxes etc., completed with all leads and lifts, loading an...

•

Supply, Erection of Insulators : 33 kV solid core insulators along with bolted type tension clamps and hardware suitable for LYNX ACSR.(33 kV side) Including cost of all material, machinery, labour, t...

•

Supply, Erection of Insulators : 90KN polymer long rod along with Tension lamps and hardware suitable for LYNX ACSR.(33 kV side) Including cost of all material, machinery, labour, transportation, taxe...

•

Supply and fixing C type wedge /Terminal connector/ST/PI/GOS Pad clamps suitable for LYNX to Coyote Including cost of all material, machinery, labour, transportation, taxes etc., completed with all le...

•

Supply and laying of COPPER CONTROL CABLE :19 core 2.5 Sq.mm for Supply and laying of PVC armoured Insulated Copper Control Cable with lugs/ferrules Size of Cable Including cost of all material, machi...

•

Supply and laying of COPPER CONTROL CABLE : 4 Core x 6 Sq.mm Supply and laying of PVC armoured Insulated Copper Control Cable with lugs/ferrules Size of Cable Including cost of all material, machinery...

•

Supply and laying of COPPER CONTROL CABLE : 4 Core 2.5 Sq.mm Supply and laying of PVC armoured Insulated Copper Control Cable with lugs/ferrules Size of Cable Including cost of all material, machinery...

•

Supply and laying of COPPER CONTROL CABLE : 2 Core 2.5Sq.mm Supply and laying of PVC armoured Insulated Copper Control Cable with lugs/ferrules Size of Cable Including cost of all material, machinery,...

•

Supply and laying of COPPER CONTROL CABLE : vi)4cx25sq.mm Supply and laying of PVC armoured Insulated Copper Control Cable with lugs/ferrules Size of Cable Including cost of all material, machinery, l...

•

Supply and laying of 1.1 kV Class Armoured Aluminium Cable with glands/lugs/ferrules : vi)Alluminium 4 core 70 sqmm for Supply and laying of PVC armoured Insulated Copper Control Cable with lugs/ferru...

•

Supply and fixing of MS Flats sodium bentonite clay: 50x6mm for earth connection:Earth mat formation as oer the KPTCL RandD design welding and applying ACB paints( inclusive of all TandP and consumabl...

•

Supply and fixing of GI Flats 50x6mm for earth connection: Grounding of equipment with 50x6mm G.I flat and connecting equipment to the earth mat/ground pit each point of Earthing with all formation wo...

•

Supply and fixing of Cast iron pipe electrode of 100mm internal dia 13mm thick 2.75mtr long: Grounding of equipment by providing cast iron pipe of 100mm I.D. 13mm thickness 2.75 mtr long with 2 part c...

•

Supplying and fixing of 450mm dia x 450mm height 1.5 inch to 2 inch Hume pipe collars (non pressure type) for earth pits. Including cost of all material, machinery, labour, transportation, taxes etc.,...

•

Supplying and fixing of HESCOM Metering panel (Main and check meter) struss etc for meter box. etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of...

•

Supplying and fixing of DC Distribution Panel (Indoor) as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A...

•

LTAC Panel (Indoor), 415 V as per technical specification comprising of voltmeter and ammeter, 1 I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU, + 2 nos. 3 Phase 32A O/G SFU 100A + 14 O/G SFU,6 nos. 3 Pha...

•

Supply and Laying of 1 KM Length of 11 kV, 3x95 Sqmm XLPE UG Cable Using Conventional Laying with Excavation of Soil 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMO...

•

Supply and Laying of 1 KM Length of 11 kV, 3x240 Sqmm XLPE UG Cable Using Conventional Laying with Excavation in Soil 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARM...

•

Yard lighting. Fabricating, supplying and erection of 9 ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS2062 for base plate with door opening ar...

•

Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4inch dia telescopic M. S. pipe, with 2inch dia1.5m long M.S.Bracket and are welded with suitable angle, using 6mm thick M...

•

Supplying and fixing of 120 W LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Inj...

•

Supply and Laying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity a...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT Cable 2.5 to 25 Sqmm. etc., completed with all leads and lif...

•

Earth work excavation for Foundation by mechanical means for all works and upto required depth as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caut...

•

Providing and laying in position Cement Concrete1:3:6 for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

•

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcementincluding cost of all materials, machinery, labour, cleaning,straightening,cutting, bending, hooking, laping/welding joints, tying wit...

•

Foundations: Engineering, supply of all labour, material and construction of RCC footing including the cost of excavation, cement concreting, reinforcement, backfilling, waterproof cement painting, fo...

•

Supply and fixing of 33kV CT Support Structureetc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

Supply and fixing of 33kV Surge arrestor support structure etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

PI Support structure etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

Supply and fixing of 33kV isolators support structure etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

Supply and fixing of NCT support structure etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

Supply and fixing of ACDB/DCDB support structure etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

Supply and fixing of SF-6 Breaker foundation, 33kV SF-6 Breaker foundation as per approved design and drawing etc., completed with all leads and lifts, loading and unlaoding as per direction by Engine...

•

Supply and fixing of 6.60 kV, 5 MVA, 800 A Outdoor type Kiosks comprising of 11+4F+1CB+1AP3 PCVCB foundation as per approved design and drawing including supply of material and labour etc., completed ...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification. granular material etc., completed with all leads and lifts, loading an...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal ...

•

Providing and laying 300 mm diameter open jointed hume pipes with collars in rock-toe for drainage including cost of all materials, machinery,labour and all other ancillary operationsetc., completed w...

•

Supplying and laying of MS Flats of 50x6 mm of sizes, welding and applying ACB paint to welded portion and covering with sodium bentonite clay as per the drawing/standard specification and consolidati...

•

Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conne...

•

Supplying and Grounding of equipment’s by providing cost iron pipe of 100mm ID, 13mm thickness 2.75mts long with 2 parts Clamp made out of GI Flat 15x6mm continuously welded around the pipe using ca...

•

Supplying and Providing 450mm dia 450mm height 1.5 inch to 2 inch thick hume pipe collar (non pressure type) for earth pitsetc., completed with all leads and lifts, loading and unlaoding as per direct...

•

Supplying and Providing PVC. Pipe:63mm dia (outer), 2mm thick etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

Supplying and Providing PVC. Pipe 75mm dia (outer), 2mm thick etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

Supplying and Providing PVC. Pipe: 25mm dia (outer), 2mm thick for yard lightingetc., complete with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

Providing primer painting to structural steel surfaces with epoxy primer paint of approved quality including cleaning the surface, cost of all mate- rials, labour,(For Power House and Allied works) et...

•

letter writing for labeling of equipment (the cost includes the cost of paint and Labour Charges etc., complete with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge o...

•

Site levelling a)Supplying all labour , Machineries, tools, plants etc., and levelling the switchyard area to the required RL , line ,grade and cross section. Work includes cutting in all types of soi...

•

FILLING New Earth Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited lay...

•

Cable trenches a)Construction of RCC (grade M20) cable trenches and RCC hume pipe trenches for required section /size including the cost of excavation in all types of soil/rock back filling with avail...

•

Providing and forming 5Mtrs wide Concrete road including providing walk ways , fixing RCC kerb stones , within sub station or out side the station premises as per technical specification , layout and ...

•

Site Surfacing Jelly spreading :Providing and spreading 20/25 mm jelly in station yard including conveying, stacking for measurement, spreading in layer of 100 mm over all including cost of all materi...

•

Providing and laying insitu vibrated M-20 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for well steining including cost of all materials, machinery, labour, cleaning...

•

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcementincluding cost of all materials, machinery, labour,cleaning,straightening,cutting, bending, hooking, laping/welding joints, tying with...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specificationetc., completed with all leads and lifts, loading and unlaoding as per d...

•

Security fencing to Electrical Sub Station with RCC pole and chain link mesh.a)Providing and fixing RCC precast fencing pole of size 0.15mx0.15mx2.0m casted in M 20 with 20mm down size aggregates maki...

•

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

•

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after ...

•

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even ...

•

Supply and fixing of Circuit Breaker :SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting structures arrangements, with rigid, bi-met...

•

Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators: A) 33kV, 800A, 25KA class Doub...

•

Supply and fixing of Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators: A) 33kV, ...

•

Supply and fixing of Current Transformer : Current Transformer including Marshalling box, Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Lynx ACSR Conduct...

•

Supply and fixing of Surge Arrestor : Surge arrestors (Porcelain housing) Metal Oxide Gap less type with terminal connectors suitable for Lynx ACSR as per technical specification.30KV, 10KA, Class-II ...

•

Supply and fixing of Control and Relay Panel : Simplex Type Control and Relay Panel complete as per specifications. (110V DC control) should SCADA Compatible IEC 60870-5-103 Protocol For 33 KV line. e...

•

Supply and fixing of Station Structures: (Approx. Unit Wt. in MT add 5% towards B and N)33kv station sturuture fabricated out of galvanised iron column type 3T1 with peak etc., completed with all lead...

•

Supply and fixing of 33kv station sturuture fabricated out of galvanised iron Beam type 3B1 with peak etc., complete with all leads and lifts, loading and unlaoding as per direction by Engineer-in cha...

•

Supply and fixing of GI Mounting structure including Bolts and Nuts (Lattice type)33KV Isolator Live Point Height 3750mm-0.24MT etc., complete with all leads and lifts, loading and unlaoding as per di...

•

Supply and fixing of GI Mounting structure including Bolts and Nuts (Lattice type)33KV Current and Voltage Transformer(0.142MT) etc., complete with all leads and lifts, loading and unlaoding as per di...

•

Supply and fixing of GI Mounting structure including Bolts and Nuts (Lattice type)33KV Lightening arrestors - 0.069MT etc., completed with all leads and lifts, loading and unlaoding as per direction b...

•

Supply and fixing of GI Mounting structure including Bolts and Nuts (Lattice type)33KV Pedestal insulators - 0.14 MT etc., complete with all leads and lifts, loading and unlaoding as per direction by ...

•

Supply and fixing of BUS BAR FORMATION:Lynx ACSR with 1.5% Sag etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work. etc., complete with all l...

•

Supply and fixing of BUS BAR FORMATION:Coyate ACSR with 1.5% Sag etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

Supply and fixing of BUS BAR FORMATION: Earth wire 7/3.15mm steel with clamps / lugs etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

Supply and fixing of Insulators : Post insulators : Cylindrical solid core as per IS 5350,part II and III 33 KV Class etc., completed with all leads and lifts, loading and unlaoding as per direction b...

•

Supply and fixing of Disc insulators with hardwares. Single Tension string using 3 units of each 11KV, 90KN disc insulator along with bolted type tension clamp and hardware suitable for lynx ACSR etc....

•

Supply and fixing of Hardwares : C type Wedge Connector (T type) suitable for Lynx to Lynx ACSR etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge o...

•

Supply and laying of LT Power armoured UG cable as per specification.1.1 KV, PVC insulated 70 Sqmm copper, cable 4 core with glands/lugs/ferrules etc., completed with all leads and lifts, loading and ...

•

Supply and laying of Copper Control Cables :1.1kV class PVC insulated Copper Control Cable with Lugs/Ferrules/ glands as per technical specifications. 19 C x 2.5 Sqmm etc., completed with all leads an...

•

Supply and laying of Copper Control Cables :1.1kV class PVC insulated Copper Control Cable with Lugs/Ferrules/ glands as per technical specifications. 4 C x 6.0 Sqmm etc., completed with all leads and...

•

Supply and laying of Copper Control Cables :1.1kV class PVC insulated Copper Control Cable with Lugs/Ferrules/ glands as per technical specifications. 4 C x 2.5 Sqmm etc., completed with all leads and...

•

Supply and laying of Copper Control Cables : 1.1kV class PVC insulated Copper Control Cable with Lugs/Ferrules/ glands as per technical specifications.2 C x 6 Sqmm etc., completed with all leads and l...

•

Supply and laying of Copper Control Cables :1.1kV class PVC insulated Copper Control Cable with Lugs/Ferrules/ glands as per technical specifications.2 C x 2.5 Sqmm etc., completed with all leads and ...

•

Earth Mat Formation:Excavation, formation, refilling for earth mat etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

Supplying and laying MS.Flat 50 x 6 mm flat welding and applying ACB paint to welded portion as per drawing/standard if required (all other materials to be supplied by contractor) etc., completed with...

•

Providing and laying 25mm dia, 1.05mtr. long Earthmat Spike of MS Rod including bending top 50 mm etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge...

•

Supply and laying of Grounding of equipments with 50 x 6 mm G I flat and connecting equipments to the earth mat/ground pit including all connected works with all materials supplied by the contractor.e...

•

Supply and laying of Cast Iron Pipe Electrode of 100mm internal dia, 13mm thick, 2.75 meter long etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge ...

•

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plantsetc., complete w...

•

Providing Deep Bore EarthingSinking bore of 150 mm clear dia using fast rig including fixing of 40 mm dia MS Rod, including jointing the pipes as per KPTCL standard and providing sodium bentonite trea...

•

Supplying and laying 40 mm dia MS Rod etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

Supplying and spreading Bentonite Clay. etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

Supplying and laying cost of GI Flat for joining two rods by welding to obtain continuous length etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge ...

•

Supplying and erection of street lighting lattice type structure along with GI pipe for fixing of LED lamp (0.182 MT + 5% BandN)-8.5 mtr height etc., completed with all leads and lifts, loading and un...

•

Station yard lighting (outdoor):Design of Station Yard illumination in Confirmity with the illumination levels mentioned in the Technical Specification, Supply and erection of Station Yard illuminatio...

•

Supplying and laying Rubber mats 1000mm X 2000mm X 12mm size tested for 15kV class etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

Supplying and fixing 110 V, 15 A float and 30 A boost (with float and boost battery charger as per technical specification) etc., completed with all leads and lifts, loading and unlaoding as per direc...

•

Releasing and refixing of existing capacitor 2.904mvar capacitor bank note:the labour rate of 110kv CandR PANEL IS consider as per common SR-2023-24 etc., completed with all leads and lifts, loading a...

•

Releasing and re errection of Isoulators:11KV is0lators, double break 400A,25KA capacity with ragid bimetalic terminal connetors suitable for coyote ACSR conductor etc., completed with all leads and l...

•

Releasing and re errection of Lighting arrester (porcelain housing, metal oxide, Gapless type)9KV ,10KA station class with connetor and clamps etc., completed with all leads and lifts, loading and unl...

•

Releasing and refixinng of isolator structureandaceessories etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

Releasing and re errection ofGI - mounting structure including bolts and nuts (lattice type)(approx unit wt.in MT add 5% towards B and N)1.11KV UG cable support structures (0.069 MT)suitable for bolte...

•

copper control cables 1.1KV PVC insulated copper control cable with LUGS /FERRULES as per technical specification 1)4CX2.5sq mm etc., completed with all leads and lifts, loading and unlaoding as per d...

•

copper control cables 1.1KV PVC insulated copper control cable with LUGS /FERRULES as per technical specification 4CX6.0sq mm etc., completed with all leads and lifts, loading and unlaoding as per dir...

•

11kv UG Cable with cable with required cable termination at both ends11kv XLPE CABLE 240sqmm,alluminium cable 3core to be run from 11kv switchgear to11kv take off DP Structure /UG CABLE support struct...

•

cable termination kits suitable for following sizes as per technical specificationindoor etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

cable termination kits suitable for following sizes as per technical specificationoutdoor etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work...

•

Earthing materialssupplying and GROUNDING of equipment with G I FLAT 50X6mm and connecting equipment to the earth math/grounding pit each point of earthing with all formation works like bending ,twist...

•

Supply and fixing of Grounding of equipment by providing cast iron pipe of 100mm thiickness 2.75mtrs long with 2 part clamp out of GI Flat 50x6mm continuously welded around the pipi using cast iron we...

•

Supply and fixing of 450mm dia,450mm height and 50mm thick Hume pipe collars for earth pits etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of wo...

•

Supplying and erection of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No.) complete set . etc., completed with...

•

Releasing an re-errection 11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR. etc., completed with all leads and ...

•

Releasing an re-errection 9 kV, 10 KA LA with connector and clamp etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

Releasing an re-errection 11kv XLPE CABLE 240sqmm,alluminium cable 3core to be run from 11kv switchgear to11kv take off DP Structure /UG CABLE support structure etc., completed with all leads and lift...

•

Supply and fixing of cable termination kits suitable for following sizes as per technical specification 240sqmm 3corecable termination kits suitable for indoor etc., completed with all leads and lifts...

•

Supply and fixing of cable termination kits suitable for following sizes as per technical specification 240sqmm 3corecable termination kits suitable for outdoor etc., completed with all leads and lift...

•

Supply and fixing of GROUNDING of equipment with G I FLAT 50X6mm and connecting equipment to the earth math/grounding pit each point of earthing with all formation works like bending ,twisting,drillin...

•

Releasing andrefixing Rabbit ACSR conductor etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in charge of work.

•

Excavation for Equipments foundation: Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per dra...

•

Construction of Embankment by excavating the available approved Gravel /Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

•

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

PCC Concrete for Equipments foundation (1:4:8): Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/ basalt crushed graded coarse ...

•

RCC Concrete for Equipments foundation (1:1.5:3): Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/ basalt crushed graded coarse aggregates and fi...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height....

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Supplying SandS RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work s...

•

Steel Fabrication. Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

•

Providing and fixing Structural Steel work riveted, bolted or welded inbuilt up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Site surfacing and Jelly spreading: 1. The site surfacing with due compacting should be executed only after the foundation of all equipments, structures and cable duct and controol room. 2. The spread...

•

Demolishing RCC work manually/bymechanical means includung stacking of steel bars and disposal of unserviceable material to the appropriate disposal area foundation11kV UG Cable Terminating Structure ...

•

Demolishing RCC work manually/bymechanical means includung stacking of steel bars and disposal of unserviceable material to the appropriate disposal area foundation11kV Capacitor Bank etc., completed ...

•

Demolishing RCC work manually/bymechanical means includung stacking of steel bars and disposal of unserviceable material to the appropriate disposal area foundation11kV RCC 9/9.5 M Poles DP Structures...

•

Levelling : Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as pe...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mix...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mix...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Fencing with G.I. barbed wire R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and en...

•

Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...

•

Earth work excavation for Foundation by mechanical means for all works required depth, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ligh...

•

Earth work excavation for Foundation by mechanical means for all works and required depth,as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution l...

•

Earth work excavation for Foundation by Mechanical means required depth,as per drawing and technical pecifications, including setting out, shoring, strutting, barricading, caution lights, including co...

•

Providing cohesive non-swelling ( CNS ) soil lining to canals using soil collected in heaps along the edge of canal requiring CNS soil lining as part of the disposal of excavated soil from canal excav...

•

Providing and laying insitu vibrated M-20 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for bed lining of canal including cost of all materials, machinery, labour, cl...

•

Providing and laying insitu vibrated M-20 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for side lining of canal including cost of all materials, machinery, labour, c...

•

6.6 KV HT Switchgear with 1 Incomer, 1 Transformer feeder, 1 Bus capacitor feeder and 3 motor feeders. Make - HT Switchgears, Cleaning the panel externally and internally, Checking and testing of cont...

•

LT Distribution board - Make BM Engineering, Pune. Cleaning the panel externally and internally. Checking and testing of control wiring, replacement of faulty miscellenous items such as lamps, push bu...

•

Bus and Motor HT Capacitors. Make Madhav Capacitors, Pune. Cleaning the panel externally and internally.Checking and testing of control wiring, replacement of faulty miscellaneous items such as lamps,...

•

Temperature scanner - Make BM Engineering, Pune. Cleaning the panel externally and internally.Checking and testing of wiring. Repairs / Replacement of scanners and calibration Painting of panel extern...

•

Battery Charger and DCDB - Make elecytronic systems, Vadodara. Cleaning the panel externally and internally.Checking and testing of control wiring and cards, replacement of faulty miscellenous items s...

•

Battery set. Replacement and commissioning of suitably rated VRLA Battery set for 110V DCProtection supply.All mandetory accessories shall be supplied with the batteries. etc., completed with all lead...

•

Remote Control Panel - Make - BM Engineering Pune. Cleaning the panel externally and internally.Checking and testing of control wiring, replacement of faulty miscellenous items such as lamps, push but...

•

Soft starters - Innovative make. Cleaning the panel externally and internally.Checking and testing of control wiring, replacement of faulty miscellenous items such as lamps, push buttons, fuses, conta...

•

HT LT and Cabling. Cleaning of trench for cables Checking of all cables for continuity, Insulation esistance. Laying of balance control cables. Balance Termination of HT LT power and control Cables Pr...

•

Safety items. To supply safety items such as CO2 cylinders, rubber mats, charts as per CEIG requirements.etc., completed with all leads and lifts, loading and unlaoding as per direction by Engineer-in...

•

VT Pumps - Make Jyoti Limited. Dismantling of all pumps Cleaning of all parts Replacement of all line shaft bearings, pump thrust bearings, Providing oil level indicators for all pumps, Providing new ...

•

VT Motors 6.6 KV 1300 KW - Jyoti make. Cleaning and checking of all motors to confirm electrical health of motor.Heating shall be provided to winding to improve IR, which will be certainly less than r...

•

Butterfly and non return valves. Actuators For BFV NRV in pumphouse - dismantling of valves, changing gaskets, cleaning internals etc. Providing required hardware etc., completed with all leads and li...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Royalty Rate 2025.pdf

Others - Royalty Recovery • 4.03 MB

KW-4_mugalolli CALL5.docx

Tender Document • 5.24 MB

Mugalolli LIS 2 physical quantities.pdf

Others - Physical quantities • 0.61 MB

SECTION 7 DETAILED TECHNICAL SPECIFICATIONS OF ELECTRICAL WORKS.docx

Others - Electrical Specifications • 0.49 MB

dwg.pdf

Others - drawings • 5.03 MB

general_specifications_admin.pdf

Others - specification • 0.20 MB

detailed_specification.doc

Others - specification • 0.61 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .