Repair of office building MICAD Division Panipat

Amount

Works Details

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.(New HSR Item no 5.45)

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of Asbestos Cement sheet ( New HSR Item no. 5.15.2)

Dismantling cement conglomerate / terrazzo floors 25 mm to 50 mm manually/ by mechanical means and disposal of material within standard lead as per direction of Engineer- in-charge. (HSR 5.42).

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead Of area 3 sq. metres and below( New HSR Item no. 5.30.1)

Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required.(New HSR Item 9.35)

Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt)conforming to IS1322 ( New HSR Item no. 28.1.1 & 28.5)

Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete Corrugated serrated adjustable ridges ( New HSR Item no. 9.38)

CEMENT PLASTER (IN FINE SAND) 12 mm cement plaster of mix :1 :4 (1 cement: 4 fine sand) (New HSR Item No-11.5.3)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS15622(thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.( New HSR Item No. 10.58)

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.( New HSR Item No. 11.60)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer (New HSR Item no. 11.64)

Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old manufacture (one or more coats) and of required shade on old work to give an even shade.( New HSR Item no 30.24)

Finishing walls with water proofing cement paint of required shade for old work(one or more coats @ 2.20 kg/10 sqm) complete.( New HSR Item No. 30.35.2)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete size 600mm X 600mm ( New HSR Item no. 10.63.2)

Providing and fixing tiled false ceiling of 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross 'T' of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required .cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1 .6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.(New HSR Item no. 9.46.5).

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid separately)Kiln seasoned and chemically treated Hollock wood ( New HSR Item no 12.1.3)

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete 300 x16mm ( New HSR Item No 12.65.1)

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete ( New HSR Item no 12.66.2)

Providing and fixing bright /matt finished 125 mm Stainless Steel handles of approved quality & make with necessary screws etc all complete( New HSR Item No 12.75.1)

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.( New HSR Item no. 12.86)

Providing and fixing aluminium die cast body tubular type universal hydraulic each door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 35 kg and door width up to 7 00 mm), with necessary accessories and screws etc. complete.( New HSR Item No 12.88)

Removing dry water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.( New HSR Item no 30.22)

Painting over the wooden surface with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with one or more coats on old work . ( New HSR Item no. 30.28.1)

Providing and fixing floor mounted, white vitreous chinaware single piece,double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous chinaware cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge(New HSR Item no 22.34)

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock,32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White vitreous chinaware Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock ( New HSR Item no 22.4)

Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. switch in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe for Group B ( New HSR Item No. 23.3.2.2)

Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin socket and 1 no 5/6 Amp switch required MS Box etc complete as required for Group B ( New HSR Item no. 23.3.4.2)

PVC CONDUIT and MS/GI BOX only for Twin Control light point with 2 way 5amp single pole switch for Group B(New HSR Item no. 23.7.2.2)

PVC CONDUIT and MS/GI BOX only for 3 pin 5 amp. plug point for Group B(New HSR Item no. 23.7.4.2)

Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect.( New HSR Item no. 23.8.1) . Switch 5 amp. On existing sheet

Wall socket 5 amp on existing sheet

Providing and fixing 32 mm internal nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes , having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge ( New HSR Item No 22.87.4)

Providing and fixing 25 mm internal nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes for internal work - Exposed on wall, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge ( New HSR Item no. 22.85.3)

Providing and fixing in position singel socket Type A SWR UPVC soil waste or antisyphonage pipes of 160 o/d as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage ( New HSR Item no. 22.222.1.1)

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 ( New HSR Item No 22.104.1)

Providing and fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 ( New HSR Item No 22.107.1)

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.( New HSR Item no 22.117)

Providing and fixing 600x450 mm bevelled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.( New HSR Item No. 22.209)

Providing and fixing toilet paper holder of C.P. brass( New HSR Item No 22.42.1)

Providing and fixing 150 mm dia C.P. brass shower rose with 15 or 20 mm inlet(New HSR Item no 22.102.2)

Providing and fixing in position best Indian make C.P. brass Tumbler cum Tooth Brash holder fixed in with rawl plugs with C.P. brass screws and complete including cutting and making good the walls etc.( New HSR Item No 22.214)

Painting with aluminium paint of approved brand and manufacture to give an even shade One or more coats on old work ( New HSR Item No 30.29.1)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) ( New HSR Item No.30.54.2)

Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.( New HSR Item No. 30.8)

Supply, erection, testing of 48" Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge ( New HSR Item No 20.71.1)

Supplying, errection, testing of Exhaust fan (as per IS code 374) having a each capacity of 45 cubic metre per minute complete with suitable G.I sheet ducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge.( New HSR Item No. 20.72)

Informatory sign board 900 x 600 rectangular as per IRC 67-2012 with retro reflective sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 4 mm thick aluminium composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5mm on both sided and fixed the same with sutiable size aluminium alloy rivets @ 200mm c/c to back support frame of 25 x 25 x 3mm angle iron supported on a square hallow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-20 of size 0.45x0.45x0.75m for vertical post complete as per dause 801 of MORT & H specification (New HSR item No. 34.11.1)

Toilet for Gents & Ladies Staff