Construction of Temporary Building for Division and Sub-Division Office of Ken Betwa Link Canal Construction Division-2 Mahoba in District Mahoba

Amount

Excavation of foundation in Mar, rankar and Kankar Mix soil including lift up to 1.50 m and lead up to 30 m including filling watering, ramming of excavated earth in to the trenches or upto the space and sides of the foundation trenches or into thre plinth and removal and disposal or surplus earth as directed by Engineer-in-charge upto a distance of 30 m from the foundation trenches.

Sand filling in plinth i/c supply of necessary quantity of sand including cost of all materials labour and T&P etc required for proper completion of work with all taxes but excluding GST.

Laying C.C. 1:2:4 (M-15) by mechanical mixing, mechanical vibrating , curring with cost of all material , labour and T&P etc. required for proper completion of work including all taxes but excluding GST

R.C.R. Khanda Stone masonry in 1:3 mix with cement & sand including all cost of material, labour and T&P etc. required for proper completion of work including all taxes but excluding GST

Laying C.C. 1:3:6 (M-10) by mechanical mixing, mechanical vibrating , curing with cost of all material, labour and T&P etc. required proper completion of work including all taxes but excluding GST

2.5 cm thick damp proof course with concrete consisting of cement, 1.5 part approved course sand and 3 parts approved 13 mm graded stone grit and i/c water proofing material as ordered by engineer in charge in the proportion as specified by the manufacturer.

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Laying R.C.C. 1:1.5:3 (M20) By Mechanical mixing, Mechanical Vibrating , curing with all cost of material, labour and T&P etc. required for proper completion of work including all taxes but excluding GST

Brick work 1:3 including all labour etc. required for proper completion of work with all taxes but excluding GST

Laying C.C. 1:1.5:3 (M-20) by mechanical mixing, mechanical vibrating , curring with cost of all material , labour and T&P etc. required proper completion of work including all taxes but excluding GST

Centering and Shuttering for R.C.C. slabs, lintels and simple beam i/c all materials & T&P

Steel reinforcement for Cement Concrete work i/c cutting, placing, binding with GI wire with its cost , all labour material and T&P etc. required for proper completion of work but excluding GST

Cement sand plaster 1:4 12.5 mm thick on wall .including all labour, material and T&P etc. Required for proper completion of work including all taxes but excluding GST

Providing and laying of 8 to 10mm thick ivory or light shade vitrified tiles of 600mmx600mm size in flooring or skirting laid with 1:3 (1 cement: 3 sand) finishing with cement slurry and with pigment grouting and polishing complete i/c supply of all materials, labour, T&P required for proper completion of the work.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered Wall surface to prepare the surface even and smooth complete including all labour, material and T&P etc. required for proper completion of work including all taxes but excluding GST

Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturer specifications: Two or more coats applied on walls @1.25 ltr/10 sqm over including one coat of special primer applied @0.75 ltr/10 sqm

Providing and fixing of Iron angle (50.0mm x50.00 mmx6.0mm) frames of doors, windows, Ventilation

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel frames by welding

Providing and fixing fly/mosquito proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm with 2nd class teak wood beading 62 mm × 19 mm all complete.

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collectingsamples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools,plants & machineries required for the job, all complete as per directionof Engineer-in-charge, upto 90 metre depth below ground level. 300 mm dia

All types of soil

Rocky strata including Boulders

Supplying,assembling, lowering and fixing in vertical position in borewell unplasticised PVC medium well casing (CM) pipe of required dia confirming to IS:12818 including required hire and labour charge fitting and accessories etc. all complete for all depth as per direction of engineer-in-charge

150 mm dia

Supplying, assembling, lowering and fixing in vertical position in borewell unplasticised PVC medium well screen (RMS) pipe of with ribs, confirming to IS:12818 including hire and labour charges, fitting and accessories etc. all complete for all depth as per direction of engineer-in-charge 100 mm dia.

Providing and fixing GI pipe complete with GI fitting and Clamps i/c cutting and making good the wall etc. 50 mm dia

Painting one coat of wooden primer on new wooden surface including throughly cleaning of dirt & other foreign matter and sand papering & making smooth surface and thereafter two coat of superior quality of synthetic enamel paint approved make such as luxol higloss, apcolite, superiac, dulux, on new wooden surface (excluding cost of primer) including cost of all material, labour T&P etc. required for proper completion of work.

Painting one coat of red oxide primer on steel surface after sand papering and cleaning of surface including cost of all material, labour T&P etc. required for proper completion of work and thereafter two coat of synthetic enamel paint on new surface (excluding cost of primer) superior quality such as luxol higloss, apcolite, superiac, dulux, including coast of all material labour T&P etc. required for proper completion of work.

Providing and laying of rubble moulded zig zag interlocking conctrete block pavaement having thickness 80 mm as per drawing and technical specification

Providing and fixing in position teak wood perforated particle board celling tiles bonded with B.W.P. type phenol formaldehyde synthetic resin tiles in size 60cm x 60cm x13mm with aluminium chanal/ M.S. angle ceiling section with 12 mm dia MS bar hangers for suspension from concrete slab and with the arrangment of fixing tiles on aluminium T-section fixed with suspended bars with provision for providing lighting fixtures including 3 coat of flate oil paints of approved quality and shade and a coat of pink primer/ copal varnish on the side facing the roof as per direction given by the Engineer in- charge.

Engaging Computer operator

Hiring 01 number diesel vehicle (innova & other similar XUV) with its driver and maintenance i/c cost of diesel fuel minimum 3000 km/month

Heiring 02 number diesel vehicle (Bolero) with its driver and maintenance i/c cost of diesel fuel minimum 3000 km / month

Engaging Chawkidar for division office & Sub division office through shramik mukhiya

Engaging Safai Karmchari for division office & Sub division office

Engaging peon for division office & Sub division office

Earth Work in Filling with lead upto 595 m and lift upto 1.5 m including making profile, dressing, manual compaction, labour and T&P etc. required for proper completion as per direction of Engineer-in-charge.

Providing and fixing panelled or panelled and glazed shutters (35 mm thick shutters of section) for doors, fixing with butt hinges of required size with necessary screws including lipping all complete as per direction of Engineer-in-charge.

Providing and fixing glazed shutters windows and clerestory windows (second class teak wood 30 mm) using 5 mm thick float glass panes fixing with 1SI marked M.S. pressed butt hinges bright finished of required size with necessary screws and fixing fly/mosquito proof M.S. wire gauge all complete as per direction of Engineer-in-charge.

Providing and fixing door fittings including door bolts, tower bolt, handles, door stopper, hydraulic door closer etc. all complete as per direction of Engineer-in-charge.

Providing and fixing window fittings including tower bolts, handles, casement stays etc. all complete as per direction of Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, i/c fixing the pipe with clampsat 1.00 m spacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and testing of joints complete as per directionof Engineer in Charge Internal Work- Exposed on Walls.

25 mm nominal dia Pipe

32 mm nominal dia Pipes

40 mm nominal dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clampsat 1.00 m spacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases and makinggood the same including testing of joints complete as per directionof Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.

15 mm nominal dia Pipe

20 mm nominal dia Pipes

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Flat back wash basin size 550x 400 mm with 15 mm C.P. brass single hole basin mixer

Providing and fixing PTMT Waste Coupling for wash basin and sink,of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia

Providing and fixing uplasticised PVC connection pipe with brass unions : 45cm length.

15mm nominal bore.

20 mm nominal bore.

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 minimum water seal, weighing not less than 260 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

15 mm nominal bore.

20 mm nominal bore.

25 mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

25 mm dia nominal bore.

32 mm dia nominal bore.

40 mm dia nominal bore.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore.

Providing and fixing brass stop cook of approved quality.

15 mm dia nominal bore

20 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

25 mm dia nominal bore.

32 mm dia nominal bore.

40 mm dia nominal bore.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, 15mm nominal bore.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore.

Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid

Providing and fixing soil, waste and vent pipes : 100 mm dia Centrifugaly Cast Spun Iron Socket and Spigot (S&S) pipe as per IS3989.

Providing and fixing trap of self-cleansing design.

Providing and fixing Square mouth SW gully trap class Sp-1 complete with CI grating brick masonary chamber with water tight CI cover with frame of 300mmx300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design.

Providing ,laying and jointing Glazed stone ware pipe etc.class SP with stiff mixure of cement mortar in proprtion of 1:1(1cement :1 fine sand )including testing of joints etc complete 150mm dia.

providing and cement concrete 1:5:10 (1cment :5 sand:10 graded stone aggregate 40mm nominal size ) all -round SW pipe including bed concrete As per standerd Design 150 mm dia SW pipe.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and Fixing flat back 465 mm x 355 mm x 265 mm size lipped from urinal basin of white glazed earthen ware first quality ( Hindustan, Neyeer make) ISI marked with 5 litres CI automatic flushing cistern ( Hindustan, Sanitax, Ashoka make) ISI marked with necessary fitting, RS or CI bracket std. size, 32 mm dia GI flush pipe "B" class with brass unions of fittings & GI waste pipe 25 mm dia x 0.66 mm complete including supply of all materials, labour and T&P etc. required for proper completion of the work including painting of cistern & fittings with approved paint, cutting and making good the wall and floors where required with cement, sand and grit.

Supply and fixing low density polythene tank Syntax or equivalent.

Providing and fixing 600 mm x 450 mm bevelled edge mirror of Atul, Kiron make glass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cleats with CP brass screws and washers including supply of all materials, labour, T&P etc required for proper completion of the work.

Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials, labour, T&P etc required for proper completion of the work.

Providing and fixing 750 mm x 20 mm size CP brass towel rail of approved quality (weight 275 gm including brackets) with a pair of CP brass brackets ( to fit the size of towel rail) fixed on the wall of wooden cleats with CP brass screws including supply of all materials, labour, T&P etc required for proper completion of the work and cutting and making good the wall plaster etc required for the work

Supply and Fixing Nahani Trap Indian make of approved heavy quality complete with CP brass grating, Nahani trap laid over base cement concrete 1:6:12 including supply of all materials, labour, T&P etc required for proper completion of the work.

providing and fixing 15 mm dia PVC ball float valve with brass rod and union complete ISI marked including supply of all materials, labour, T&P etc required for proper completion of the work.

Providing and fixing full way brass gate valve 25 mm dia with wheel valve ISI marked heavy quality including supply of all materials, labour, T&P etc required for proper completion of the work.

Supply and fixing CP brass top cock heavy quality 15 mm dia ISI marked including cutting and threading of pipe, if required including supply of all materials, labour, T&P etc required for proper completion of the work.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

(2x 1.5mm sq.+1x1.5mm sq. Earth wire)

(2x 2.5mm sq.+1x2.5mm sq. Earth wire)

(2x 4 mm sq.+1x4mm sq. Earth wire)

(2x 6 mm sq.+1x6mm sq. Earth wire)

Supplying and drawing Co axial TV cable, RG-6 grade, 0.7 mm solid copper conductor, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

tv antena socket

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. (for A.C. Point/MCB Point).

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral (TPN), sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.).

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral) SPN, 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm).

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supply and fixing of 40 Amp. TP MCB (10 KA) C Curve. CAT A

Supply and fixing of 63 Amp. TP MCB (10 KA) C Curve. CAT A

Supply and fixing of 40 Amp. FP MCB (10 KA) C Curve. CAT A

Supply and fixing of 63 Amp. FP MCB (10 KA) C Curve. CAT A

Supply and fixing of LED Tube Light fitting suitable for up to 1X22 Watt LED Tube Light on surface complete in all Respect .

Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.

Supply of heavy duty exhaust fan

Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Following size-

size 25 sq mm x 3-1/2core.

size 35 sq mm x 3-1/2core.

10 sq mm 2core.

6 sq mm 2core.

Supply and fixing of 20 watt LED surface mounting weather proof luminaire with PC housing and opal finish cover confirming to IP 65 complete in all respect.

Supply and fixing of recess mounting round 15 to 18 watt LED Down lighter having Powder coated die cast aluminium housing with heat sink, diffuser/reflector and driver set complete in all respect.

Supply and fixing of Recess/surafce mounting round 24 to 32 watt LED Down Lighter Square having Powder coated die cast aluminium housing body with extended heat sink, diffuser/reflector and driver set complete in all respect.

Supply & fixing of 7 mtr GI octagonal pole of approved make (top dia 70 mm, bottom dia 130 mm and base plate 12mm thick) having 3mm thickness with single arm bracket (1 mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation and back filling and required T&P complete in all respect.

Supply & fixing of 7 mtr GI octagonal pole of approved make (top dia 70 mm, bottom dia 130 mm and base plate 12mm thick) having 3mm thickness with double arm bracket (1 mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation and back filling and required T&P complete in all respect.

Supply & fixing of LED street light fitting having die cast aluminium body and diffuser and driver set suitable for 52 watt to 72 watt confirming to IP66 protection complete in all respect.

Supply & fixing of fire extinguisher ABC type 6.00 kg capacity ISI marked IS:15683 and TAC approved) complete with initial charge and wall bracket, alongwith supply of all materials and labour for proper completion of work.

Supplying and laying of following size DWC HDPE pipe ISI marked alongwith all accessories like socket, bend couplers etc. conforming to IS 14930, part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and fefilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia

M/s Suresh Chand Gupta (BID ID -5090311)

M/S BHARAT SINGH CONTRACTORS (BID ID -5088552)