Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹4,720
Closing Date
27 Jan 2026, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Jal Shakti Division Arki
GWSS Faggi Changer Badogin GP Kunihar Tehsil Arki District Solan HP SH_ C_O RCC Main Storage Tank 20000 ltr cap Under DMFT in 3rd Call
2026_HPIPH_125736_4
ARK-SOL01-425-8213-63
Open Tender
Civil Works
Item Rate
90 days
Arki
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
₹4,720
2 Feb 2026
15 Jan 2026
27 Jan 2026
15 Jan 2026
27 Jan 2026
15 Jan 2026
Excavation in foundation, trenches etc. earth work in all type of soil such as pick work, jumper work, blasting work kankar,mooram singles including decomposed soft and hard rock etc. upto all heights stacking the excavated earth not more than 3 metres clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths and sides of foundation etc.consolidating each deposited layer by raming and watering and then disposing of all surplus excavated earth upto all leads and lifts as directed by the Engineer in charge complete in all respects.
Providing and laying cement concrete 1:3:6 (1 cement:3 sand:6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of centring and shuttering in: Foundations and plinth including carriage of materials upto all leads and lifts complete in all respects.
Providing and laying cement concrete 1:1½:3 (1 cement: 1½ sand: 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in.
Foundation footings bases of columns and the like and mass concrete including carriage of materials upto all leads and lifts complete in all respects..
Walls any thickness (but not less than 0.10meter thickness including attached pilasters,buttresses plinth and string courses etc. from top of foundationlevel upto floor two level including all leads and lifts etc.complete in all respects
Providing and laying cement concrete work 1:2:4(1 Cement :2 Sand: 4 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work & rainforcement for reinforced concrete work in :-
Suspended floor, roofs landings shelves and their supports, balconies, beams, girders, bressumers and cantilevers up to floor two level including carriage of materials with in all leads and lifts, complete in all respects.
Providing form work with mild steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu reinforced concrete work and plain concrete work in:
Flat surfaces such as soffits of suspended floors, roofs , landing and the like ,i/c all leads and lifts, complete in all respects.
Vertical surface such as wall (any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like including carriage of materials upto all leads and lifts complete in all respects. .
Edge of slab including carriage of materials upyo all leads and lifts complete in all respects.
Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level including cost of binding wires and carriage of materials upto all leads and lifts complete in all respects.
Manufacturing, supplying & fixing of M.S frame 35x35x5mm with M.S sheet man hole cover 1.66mm thick made of M.S Angle 25x25x5mm with locking arrangement with lock and painting with red oxide complete in all respects as per drawing & design with in all leads & lifts complete & as per the direction of the Engineer-in Charge.
Laying and Jointing 32 mm dia GMS tube (Light class) for scour , over flow, outlet , inlet , ventilating pipe including all carriage of materials upto all leads and lifts complete in all respects.
Providing and fixing gun metal wheel valve of superior quality ISI marked (heavy duty) including all leads and fifts complete in all respects.
32mm dia
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.23 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.69 MB
FORM_8_Faggi_Changer_Badog.pdf
Tender Documents • 1.48 MB
FORM_6_Faggi_Changer_Badog.pdf
Tender Documents • 0.44 MB
BOQ_185315.xls
BOQ • 0.35 MB
Terms_Conditions_Faggi_Changer_Badog.pdf
Tender Documents • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .