Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.2 LAccepted-AOC 19 AIRVIEW APARTMENT VAKOLA BRIDGE NEHRU ROAD SANTACRUZ E MUMBAI 400055 | MUMBAI SUBURBAN | MAHARASHTRA | 400055 | ₹35.2 L Quoted ₹35.7 L | L1 | Accepted-AOC L1 |
| 2 | L2₹40.2 LRejected-AOC | ₹40.2 L | L2 | Rejected-AOC NOT L1 |
| 3 | L3₹42.9 LRejected-AOC 866 1ST CROSS BINNYPET MAIN ROAD NEW BINNY LAYOUT BINNYPET BANGALORE 560 023 | BENGALURU URBAN | KARNATAKA | 560023 | ₹42.9 L | L3 | Rejected-AOC NOT L1 |
| 4 | L4₹47.4 LRejected-AOC | ₹47.4 L | L4 | Rejected-AOC NOT L1 |
| 5 | L5₹50.0 LRejected-AOC RAHEJA NIWAS 243 GHORPADE PETH PUNE 411 042 | PUNE | PUNE | MAHARASHTRA | 411042 | ₹50.0 L | L5 | Rejected-AOC NOT L1 |
| Sl No | Description | Qty | Unit | Mahesh Traders L5 | MISHON TRADING CORPORATION L4 | M/s National Traders L2 | GAJANAN SALES CORPORATION L1 | shekhar & company L6 | N N J ENTERPRISES L3 |
|---|---|---|---|---|---|---|---|---|---|
| 0.00Note:- Removal of following existing unserviceable components of all type of chairs, tables and other mentioned furnitures carefully without disturbing the adjoining parts and Supply and fix new components mentioned below. Apart from BSO furniture store the repair/painting/polishing will also be carried out in various user units with in a radius of approx 20 kms under GE (Seabird) Karwar as and when required and as directed | |||||||||
| 1.00Chair writing MEC 181, C3/MEC/SP/181/MO/11, C3/MEC/SP/181/SO/8 | |||||||||
| 1.01Material and labour for removing the following unserviceable components of chair writing and replacing the same by Supply and fix of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :- | |||||||||
| 1.02 | (a) Front leg | 35 | Each | 100 ₹3,500 | 40 ₹1,400 | 120 ₹4,200 | 100 ₹3,500 | 120 ₹4,200 | 110 ₹3,850 |
| 1.03 | (b) Rear leg | 24 | Each | 135 ₹3,240 | 40 ₹960 | 240 ₹5,760 | 180 ₹4,320 | 120 ₹2,880 | 120 ₹2,880 |
| 1.04 | (c) Side rail seat | 20 | Each | 100 ₹2,000 | 20 ₹400 | 50 ₹1,000 | 100 ₹2,000 | 60 ₹1,200 | 60 ₹1,200 |
| 1.05 | (d) Bottom stiffener (side) | 55 | Each | 70 ₹3,850 | 20 ₹1,100 | 40 ₹2,200 | 60 ₹3,300 | 60 ₹3,300 | 35 ₹1,925 |
| 1.06 | (e) Arms rest | 43 | Each | 100 ₹4,300 | 40 ₹1,720 | 80 ₹3,440 | 150 ₹6,450 | 100 ₹4,300 | 60 ₹2,580 |
| 1.07 | Material and labour removing the unserviceable pvc shoes of chair writing and replacing the same by Supply and fix of new one with screw of superior quality all as shown on drawing. | 600 | Each | 15 ₹9,000 | 2 ₹1,200 | 2 ₹1,200 | 5 ₹3,000 | 10 ₹6,000 | 3 ₹1,800 |
| 1.08 | Preparation of old decorated / new replaced parts /surface of chair writing smoothing by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish all as specified shown in drawing and as directed. | 190 | Each | 210 ₹39,900 | 250 ₹47,500 | 120 ₹22,800 | 70 ₹13,300 | 360 ₹68,400 | 90 ₹17,100 |
Updated dates
Tender Value
₹80 L
EMD Value
₹1.4 L
Closing Date
5 Dec 2025, 6:00 pmClosed
COL SAIKAT DE CWE NAVY VASCO
CWE NAVY VASCO VASCO DA GAMA GOA 403802
REPAIRS, RECANNING, PAINTING AND POLISHING TO ALL TYPES OF CHAIRS AND TABLES AND OTHER WOODEN FURNITURE AT NAVAL BASE UNDER GE(SEABIRD) KARWAR
2025_MES_737980_1
86020
Open Tender
Civil Works
KARWAR
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,000
GE(SB) KARWAR
₹1.4 L
Yes
20 Jan 2026
31 Oct 2025
8 Dec 2025
31 Oct 2025
5 Dec 2025
21 Nov 2025
Amount
Note:- Removal of following existing unserviceable components of all type of chairs, tables and other mentioned furnitures carefully without disturbing the adjoining parts and Supply and fix new components mentioned below. Apart from BSO furniture store the repair/painting/polishing will also be carried out in various user units with in a radius of approx 20 kms under GE (Seabird) Karwar as and when required and as directed
Chair writing MEC 181, C3/MEC/SP/181/MO/11, C3/MEC/SP/181/SO/8
Material and labour for removing the following unserviceable components of chair writing and replacing the same by Supply and fix of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-
(a) Front leg
(b) Rear leg
(c) Side rail seat
(d) Bottom stiffener (side)
(e) Arms rest
Material and labour removing the unserviceable pvc shoes of chair writing and replacing the same by Supply and fix of new one with screw of superior quality all as shown on drawing.
Preparation of old decorated / new replaced parts /surface of chair writing smoothing by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish all as specified shown in drawing and as directed.
Chair writing FD 280
Material and labour for removing the following unserviceable components of chair writing FD and replacing the same by Supply and fix of new one of 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-
(a) Front leg
(b) Rear leg
(c) Side rail
(d) Bottom stiffener
(e) Arms rest
Material and labour for removing the unserviceable pvc shoes of chair writing and replacing the same by Supply and fix of new one with screw of superior quality all as shown on drawing.
Preparation of old decorated / new replaced parts /surface of chair writing smoothing by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish all as specified shown in drawing and as directed.
Chair writing(Chair padded with arms) FD/E6/MAP/12,MEC 2941,TP
Material and labour for removing Old unserviceable Tapestry cloth and PVC Lipping of chair writing of back rest and seat and replacing the same by Supply and fix of new PVC Lipping and tapestry cloth of superior quality not less than Rs 290/- per meter as approved.
Material and labour for removing the unserviceable Arms rest and replacing the same by Supply and fix of new arms rest made of black integral skin polyurethane with MS insert and with nut and bolts of trade pattern as approved.
Material and labour for painting of two coat of black paint (after removing rust/paint) to chair writing all as specified and shown on drgs and directed by Engineer-in-Charge.
Chair dining MEC 178, MEC 179
Material and labour for removing the following unserviceable components of chair dining and replacing the same by Supply and fix of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-
(a) Front leg
(b) Rear leg
Material and labour for removing the unserviceable pvc shoes of chair dining and replacing the same by Supply and fix of new one with screw of superior quality all as shown on drawing.
Material and labour for removing the unserviceable/broken seat of chair dinning and replacing the same by Supply and fix of new made out of 12mm thick plywood BWR grade fixed with 1mm thick lamination finish including tightening of the frame work all shown as per drawing.
Preparation of old decorated / new replaced parts /surface of chair dining smoothing by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish all as specified shown in drawing and as directed.
Chair dinning Type B C3/MEC/SP/201/MO/8
Material and labour for removing the following unserviceable components of Chair dinning Type B and replacing the same by Supply and fix of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-
(a) Front leg
(b) Rear leg
(c) Front rails
(d) Side rails
(e) Rear rails
(f) Bottom stiffener
Material and labour for removing the unserviceable pvc shoes of chair dining and replacing the same by Supply and fix of new one with screw of superior quality all as shown on drawing.
Material and labour for removing the unserviceable seat of chair dinning and replacing the same by Supply and fix New Seat with one side teak face (two piece of 6mm thick Plywood and One piece of Teak face Veneer. Paste these piece with adhesive and nails in curved shape including tightening the frame all work as per drg and as directed by Engr-in-charge)
Preparation of old decorated / new replaced parts /surface of chair dinning smoothing by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish all as specified shown in drawing and as directed.
Chair dinning FD 279
Material and labour for removing the following unserviceable components of chair dining and replacing the same by Supply and fix of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-
(a) Front leg
(b) Rear leg
(c) Side rails
(d) Front rails
(e) Rear rails
(f) Bottom stiffener
(g) Rest stiffener
Material and labour for removing the unserviceable pvc shoes of chair dining and replacing the same by Supply and fix of new one with screw of superior quality all as shown on drawing.
Preparation of old decorated / new replaced parts /surface of chair dinning smoothing by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish all as specified shown in drawing and as directed.
Chair dinning with PVC Seat FD/MAP-II/05
Material and labour for removing the unserviceable pvc shoes of chair dining and replacing the same by Supply and fix of new one with screw of superior quality all as shown on drawing.
Material and labour for removing the unserviceable/broken PVC seat by supply and fixing new PVC seat in one piece and all as shown on drawing and as per sample approved.
Preparation of old decorated / new replaced parts /surface of chair dinning smoothing by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish all as specified shown in drawing and as directed.
Chair dinning high back with cushioned C3/MEC/SP/201/193
Material and labour for removing the unserviceable pvc shoes of chair dining and replacing the same by Supply and fix of new one with screw of superior quality all as shown on drawing.
Material and labour for removing old unserviceable seat and back cushion of chair dinning high back and replacing the same by Supply and fix of new 50 mm thick cushion 32 density duly upholstered / covered with new tapestry cloth all as shown on drawing and as specified and directed.
Material and labour for removing old tapestry cloth from cushion of chair dinning and replacing the same by Supply and fix of new tapestry cloth of superior quality cloth not less than Rs 290/- per meter as approved.
Preparation of old decorated / new replaced parts /surface of chair dinning smoothing by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish all as specified shown in drawing and as directed.
Chair dinning with cushion FD/E6/MAP/10R, FD/E6/MAP/04
Material and labour for removing the following unserviceable components of chair dining (MAP) with cushion and replacing the same by Supply and fix of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-
(a) Front leg
(b) Rear leg
(c) Side rails
(d) Bottom stiffener
Material and labour for removing the unserviceable cushion with seat and Supply and fix new seat top of chair dinning with 75mm thick 32 density foam covered with tapestry cloth not less than Rs 290/- per meter as approved on seat of 12 mm commercial plywood BWR grade including tightening of frame work all as shown on drawing.
Material and labour for removing the unserviceable pvc shoes of chair dining and replacing the same by Supply and fix of new one with screw of superior quality all as shown on drawing.
Material and labour for removing old tapestry cloth from cushion of chair dinning and covered with new tapestry cloth of superior quality cloth not less than Rs 290/- per mtr as approved by Engr-in-charge and as shown on drawing
Preparation of old decorated / new replaced parts /surface of wooden furniture smoothing by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish all as specified shown in drawing and as directed.
Chair easy FD 1108
Material and labour for removing the following unserviceable components of chair easy and replacing the same by Supply and fix of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-
(a) Front leg
(b) Rear leg
(c) Side seat rails
(d) Rear seat rails
(e) Front seat rails
(f) Arms rest
Material and labour for removing the unserviceable pvc shoes of chair easy and replacing the same by Supply and fix of new one with screw of superior quality all as shown on drawing.
Preparation of old decorated / new replaced parts /surface of chair easy smoothing by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish all as specified shown in drawing and as directed.
Chair easy FD 229 C3/MEC/SP/209/MO/9, C3/MEC/SP/209/SO/5, MEC 2915
Material and labour for removing the following unserviceable components of chair easy and replacing the same by Supply and fix of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-
(a) Front leg
(b) Rear leg
(c) Side seat rails
(d) Rear seat rails
(e) Front seat rails
(f) Arms rest
Material and labour for removing the unserviceable pvc shoes of chair easy and replacing the same by Supply and fix of new one with screw of superior quality all as shown on drawing.
Preparation of old decorated / new replaced parts /surface of chair easy smoothing by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish all as specified shown in drawing and as directed.
Chair revolving cushioned seat & back MEC 2942 MEC 2941 FD/E6/MAP/01, TP
Material and labour for removing old unserviceable Gas Lifter/hydraulic assembly by Supply and fix new gas lift/hydraulic assy including tightening the frame work etc. Model No CH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T, PCH-7042/46A/46T/46R/03 R PCH 9200/01R
Material and labour for removing old unserviceable Poly Urethane Armrest by Supply and fix new arm rest of superior quality including nut and bolts. Model No PCH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T,PCH-7042/46A/46T/46R/03 R PCH 9200/01R
Material and labour for removing unserviceable wheel base by Supply and fix new wheel base including tightening the frame work. Model No PCH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T,PCH-7042/46A/46T/46R/03 R PCH 9200/01R
Material and labour for removing unserviceable castor wheel by Supply and fix new castor wheel of superior quality including tightening the frame work. Model No PCH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T,PCH-7042/46A/46T/46R/03 R PCH 9200/01R
Material and labour for removing old seat and back cover cloth and provide new tapestry cloth not less then Rs 290/- per mtr for seat and back of superior quality as specified and directed Drg No PCH-7000/1/2/3,PCH-9101R, MEC-2941
Chair Verandah FD 256
Material and labour for removing old unserviceable cane/newar from chair verandah and recanning with approved quality of cane plastic 4mm/5mm half round wide in godrej pattern as specified and directed by Engineer in Charge.
Material and labour for removing the unserviceable rubber shoe by Supply and fix new Hard rubber shoe of superior quality as shown on drawing.
Preparation of steel surfaces of chair verandah by scrapping, rubbing, cleaning including making good of bents spat re-rusting and applying two coat of synthetic enamel paint (white) complete all as specified.
Chair Verandah FD/E6/MAP/06, FD/MAP II/15
Material and labour for removing PVC seat and back of chair verandah by providing new 4mm thick seat & back made out of PVC moulded along with 4 x 10mm ribs of approved make provided at all around the outer edge & around the grooves as shown on drawing.
Material and labour for removing the unserviceable rubber shoe by Supply and fix new Hard rubber shoe of superior quality as shown on drawing.
Preparation of steel surfaces of chair verandah by scrapping, rubbing, cleaning including making good of bents spat re-rusting and applying two coat of synthetic enamel painting (white) complete all as specified.
Chair Verandah FD/E6/MAP/11
Preparation of steel surfaces of chair verandah by scrapping, rubbing, cleaning including making good of bents spat re-rusting and applying two coat of synthetic enamel painting (black) complete all as specified.
Material and labour removing the unserviceable/broken rubber shoe by providing new one of superior quality as shown on drawing.
Chair Writing/ Chair dinning/ Chair Easy MEC 181, C3/MEC/SP/181/MO/11, C3/MEC/SP/181/SO/8, FD 280, FD 279, FD 1108, FD 229, C3/MEC/SP/209/MO/9, C3/MEC/SP/209/SO/5, MEC 2915 Material and labour for removing old unserviceable cane of chair recanning with approved quality of cane plastic 2mm/3mm half round wide and Border with 4mm/5mm half round wide in godrej pattern as specified and directed by Engineer in Charge.
CHAIR CBA STEEL WITH ARMS FD-75
Material and labour for removing existing old unserviceable Seat and Back of Chair Steel Tubular with Arm (FD-75) and Welding MS FIat 11" x 2" and 4mm thick for seat (02 Nos) and Welding MS FIat 8" x 2" and 4mm thick for Back (02 Nos) on GI Tube frame work as per direction of Engr-in-charge. (a) Steel GI Tubing parts (frame Work) of chairs duly scrapping for removal of rust, dirt and Two coat of SE paint (colour or shades approved by Engr-in-Charge) (b) Supply and fix Plywood 12mm thick commercial size 18" x 17" fixed on welded MS Flat (Iron) with the help of suitable screw for a seat and paste 50mm U Foam (Cushion) on plywood for cushioning of Seat covered with tapestry cloth and black cloth linen at bottom side with the help of suitable stapler pin and upholstery work . (as per sample kept in BSO Yard) (c) Supply and fix Plywood 12mm thick commercial size 18" x 15½" fixed on welded MS Flat (Iron) with the help of suitable screw for a Back and paste 50mm U Foam (cushion) on plywood for cushioning of Back covered fully with tapestry cloth with the help of suitable stapler pin and upholstery work . Note : (i) Fixing of both Seat and Back including painting of chair will be considered as one unit. (ii). Tapestry cloth (Not less than 290/- per mtr) as per sample kept in BSO Yard or shades approved by Engr-in-Charge
Taking down old unserviceable hand rest and Supply and fix new hand rest made of PVC in Black colour as per sample.
Taking down old unserviceable PVC caps and Supply and fix new caps as per drg.
Taking down old unserviceable shoe and Supply and fix new suitable PVC/hard rubber shoes as directed by Engr in Charge.
CHAIR CB STEEL WITHOUT ARMS
Material and labour for removing existing old unserviceable Seat and Back of Chair CB Steel without Arm (FD-75) and Welding MS FIat 11" x 2" and 4mm thick for seat (02 Nos) and Welding MS FIat 8" x 2" and 4mm thick for Back (02 Nos) on GI Tube frame work as per direction of Engr-in-charge. (a) Steel GI Tubing parts (frame Work) of chairs duly scrapping for removal of rust, dirt and Two coat of SE paint (colour or shades approved by Engr-in-Charge) (b) Supply and fix Plywood 12mm thick commercial size 15" x 16 1/2" fixed on welded MS Flat (Iron) with the help of suitable screws for a seat and paste 50mm U Foam (Cushion) on plywood for cushioning of Seat covered with tapestry cloth and black cloth linen at bottom side with the help of suitable stapler pin and upholstery work . (as per sample kept in BSO Yard) (c) Supply and fix Plywood 12mm thick commercial size 15" x 14" fixed on welded MS Flat (Iron) with the help of suitable screws for a Back and paste 50mm U Foam (cushion) on plywood for cushioning of Back covered fully with tapestry cloth with the help of suitable stapler pin and upholstery work . Note : (i) Fixing of both Seat and Back including painting of chair will be considered as one unit. (ii) Tapestry cloth (Not less than 290/- per mtr) as per sample kept in BSO Yard or shades approved by Engr-in-Charge
Taking down old unserviceable PVC caps and Supply and fix new caps as per drg.
Taking down old unserviceable shoe and Supply and fix new suitable PVC/hard rubber shoes as directed by Engr in Charge.
Table dinning 8 Persons C3/MEC/SP/201/MO/25
(a) Material and labour for removing unserviceable top of table by Supply and fix new table top in one piece made out of 18/19mm thick plywood commercial BWR grade ISI marked fixed with 1.5 mm decorative lamination of required shade including 6mm thick hard wood beading made out of 1 st class well seasoned hard wood free from cracks and knots shall be provided all around the top all as shown on drawing and as directed.
(b) Material and labour for removing unserviceable long rail of table by Supply and fix new long rail made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(c) Material and labour for removing unserviceable leg of table by Supply and fix new leg made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(d) Material and labour for removing unserviceable hard rubber shoe of table by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(e) Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Table dinning 8 Persons C3/MEC/SP/193
(a) Material and labour for removing unserviceable top of table by Supply and fix new table top in one piece made out of 18/19mm thick plywood commercial BWR grade ISI marked fixed with 1.5 mm decorative lamination of required shade including hard wood edging made out of 1 st class well seasoned hard wood free from cracks and knots all around the top all as shown on drawing and as directed .
(b) Material and labour for removing unserviceable hard rubber shoe of table by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(c) Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Table dinning 6 Persons MEC-2913
(a) Material and labour for removing unserviceable top of table by Supply and fix new table top in one piece made out of 18/19mm thick plywood commercial BWR grade ISI marked fixed with 1.5 mm decorative lamination of required shade including hard wood edging made out of 1 st class well seasoned hard wood free from cracks and knots duly French polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed .
(b) Material and labour for removing unserviceable long rail of table by Supply and fix new long rail made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(c) Material and labour for removing unserviceable hard rubber shoe of table by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(d) Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Table dinning 6 Persons(1500 x 900mm) FD/MAP-II/03
(a) Material and labour for removing unserviceable top of table by Supply and fix new table top in one piece made out of 18/19mm thick prelaminated particle board exterior grade confirming to IS including hard wood edging 6 mm thick made out of well seasoned hard wood free from cracks and knots duly French polished after preparation of surface shall be provided all around the top all as directed .
(b) Material and labour for removing unserviceable stiffener of table by Supply and fix new stiffener made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(c) Material and labour for removing unserviceable hard rubber shoe of table by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(d) Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Table dinning 6 Persons 1500 x 900 mm FD-273
(a) Material and labour for removing unserviceable top of table by Supply and fix new table top in one piece made out of 18/19mm thick prelaminated particle board exterior grade confirming to IS including hard wood edging 6 mm thick made out of well seasoned hard wood free from cracks and knots duly French polished after preparation of surface shall be provided all around the top all as directed .
(b) Material and labour for removing unserviceable long rail of table by Supply and fix new long rail made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(c) Material and labour for removing unserviceable short rail of table by Supply and fix new short rail made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(d) Material and labour for removing unserviceable leg of table by Supply and fix new leg made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(e) Material and labour for removing unserviceable stiffener of table by Supply and fix new stiffener made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(f) Material and labour for removing unserviceable hard rubber shoe of table by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(g) Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Table dinning 4 Persons(1200 x 900mm) FD/MAP-II/03
(a) Material and labour for removing unserviceable top of table by Supply and fix new table top in one piece made out of 18/19mm thick prelaminated particle board exterior grade confirming to IS including hard wood edging 4 mm thick made out of well seasoned hard wood free from cracks and knots duly French polished after preparation of surface shall be provided all around the top all as directed .
(b) Material and labour for removing unserviceable long rail of table by Supply and fix new long rail made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(c) Material and labour for removing unserviceable short rail of table by Supply and fix new short rail made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(d) Material and labour for removing unserviceable hard rubber shoe of table by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(e) Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Table dinning 4 Persons MEC 178, MEC-179
(a) Material and labour for removing unserviceable top of table by Supply and fix new table top in one piece made out of 18/19mm thick plywood commercial BWR grade ISI marked fixed with 1.5 mm decorative lamination of required shade including hard wood edging made out of 1 st class well seasoned hard wood free from cracks and knots duly French polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed .
(b) Material and labour for removing unserviceable long rail of table by Supply and fix new long rail made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(c) Material and labour for removing unserviceable leg of table by Supply and fix new leg out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(d) Material and labour for removing unserviceable hard rubber shoe of table by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(e) Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Table dinning 1200 x 900 FD-273
(a) Material and labour for removing unserviceable top of table by Supply and fix new table top in one piece made out of 18/19mm thick prelaminated MDF board exterior grade confirming to including hard wood edging 6 mm thick made out of well seasoned hard wood free from cracks and knots duly French polished after preparation of surface shall be provided all around the top all as directed .
(b) Material and labour for removing unserviceable hard rubber shoe of table by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(c) Preparation of old decorated / new replaced parts /surface of table dinning smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Table peg C3/MEC/SP/202/MO/14
(a) Material and labour for removing unserviceable top of table by Supply and fix new table top in one piece made out of 18/19 mm thick plywood commercial BWR grade ISI marked fixed with 1.5 mm thick decorative lamination including well seasoned hard wood edging 6 mm thick free from cracks and knots duly French polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.
(b) Material and labour for removing unserviceable long rail of table by Supply and fix new long rail made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(c) Material and labour for removing unserviceable short rail of table by Supply and fix new short rail made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(d) Material and labour for removing unserviceable leg of table by Supply and fix new leg made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(e) Material and labour for removing unserviceable hard rubber shoe of table by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(f) Preparation of old decorated / new replaced parts /surface of table peg smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Table Peg FD-384
(a) Material and labour for removing unserviceable top of table by Supply and fix new top made out of 18/19 mm thick pre laminated particle board one side white and other side decorative choice lamination exterior grade including well seasoned hard wood edging 4 mm thick free from cracks and knots duly French polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.
(b) Material and labour for removing unserviceable long rail of table by Supply and fix new long rail made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(c) Material and labour for removing unserviceable leg of table by Supply and fix new leg out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(d) Material and labour for removing unserviceable stiffener of table by Supply and fix new stiffener made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(e) Material and labour for removing unserviceable hard rubber shoe of table by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(f) Preparation of old decorated / new replaced parts /surface of table peg smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Table writing FD-275
(a) Material and labour for removing unserviceable top of table by Supply and fix new top made out of 18/19 mm thick pre laminated particle board one side white and other side decorative choice lamination exterior grade including well seasoned hard wood edging free from cracks and knots shall be provided all around the top all as directed and as shown on drawing.
(b) Material and labour for removing unserviceable door shutter of table by Supply and fix door shutter made out of 18/19 mm thick pre laminated particle board exterior grade ISI marked of required shade including well seasoned hard wood edging 4 mm thick free from cracks and knots duly French polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.
(c) Material and labour for removing unserviceable hinges of table by Supply and fix new CP piano type hinges of superior all as shown on drawing (as per sample).
(d) Material and labour for removing unserviceable long rail of table by Supply and fix new long rail made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(e) Material and labour for removing unserviceable stiffener of table by Supply and fix new stiffener made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(f) Material and labour for removing unserviceable hard rubber shoe of table by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(g) Material and labour for removing unserviceable CP knob/Handle of table by Supply and fix new Handle SS 75mm (as per sample) of superior quality as per sample approved all as directed.
(h) Material and labour for removing unserviceable drawer table by Supply and fix new drawer including Handle SS 75mm (as per sample) of superior quality all as shown on drawing and as specified.
(j) Preparation of old decorated / new replaced parts /surface of table writing smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Table with drawer 90 x 60 x 76 cm MEC-176
(a) Material and labour for removing unserviceable top of table by Supply and fix new table top in one piece made out of 18/19 mm thick plywood commercial BWR grade ISI marked duly fixed with 1.5 mm thick decorative lamination of required shade including well seasoned hard wood edging 6 mm thick free from cracks and knots shall be provided all around the top all as directed and as shown on drawing.
(b) Material and labour for removing unserviceable long rail of table by Supply and fix new long rail made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(c) Material and labour for removing unserviceable short rail of table by Supply and fix new short rail made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(d) Material and labour for removing unserviceable leg of table by Supply and fix new leg out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(e) Material and labour for removing unserviceable CP knob/Handle from table by Supply and fix new CP Knob of superior quality as per sample approved all as shown on drawing and as specified.
(f) Material and labour for removing unserviceable stiffener of table by Supply and fix new stiffener made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(g) Material and labour for removing unserviceable hinges of shutter of table by Supply and fix new CP piano type hinges of superior quality as per sample approved all as directed.
(h) Material and labour for removing unserviceable hard rubber shoe of table by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(j) Material and labour for removing unserviceable back ply of table by Supply and fix new back ply in one piece made out of 6 mm thick plywood commercial BWR grade ISI marked all as shown on drawing.
(k) Preparation of old decorated / new replaced parts /surface of table with drawer smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Table dressing gents MEC-173
(a) Material and labour for removing unserviceable back mirror plywood of table by Supply and fix new back made out of 6 mm thick commercial plywood BWR grade ISI marked as shown on drawing.
(b) Material and labour for removing unserviceable frame by Supply and fix new frame made out of 1 st class well seasoned hard wood free from cracks and knots all as specified and as shown on drawing.
(c) Material and labour for removing unserviceable beading from mirror by Supply and fix new beading made out of 1 st class well seasoned hard wood free from cracks and knots all as specified and as shown on drawing.
(d) Material and labour for removing of unserviceable old looking mirror by Supply and fix new sheet glass electro-copper plated mirror 5mm thick all as specified and as shown on drawing.
(e) Material and labour for removing unserviceable drawer of table by Supply and fix new drawer made out of 12 mm thick commercial plywood BWR grade & bottom ply 6mm thick including CP Knob of superior quality all as per shown on drawing and as specified.
(f) Material and labour for removing unserviceable sliding glass of table by Supply and fix new plain glass 5 mm thick of superior quality all as per shown on drawing and as specified.
(g) Material and labour for removing unserviceable CP knob/Handle of table by Supply and fix new CP Knob of superior quality as per sample approved all as directed.
(h) Preparation of old decorated / new replaced parts /surface of table dressing gents smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Table dressing gents C3/MEC/SP/203/MO/26
(a) Material and labour for removing of unserviceable old mirror of table by Supply and fix new sheet glass electro-copper plated mirror 5mm thick including all as specified and as shown on drawing.
(b) Material and labour for removing unserviceable back plywood from mirror of table by Supply and fix new back made out of 6 mm thick commercial plywood BWR grade ISI marked as shown on drawing.
(c) Material and labour for removing unserviceable drawer table by Supply and fix new drawer made out of 12 mm thick commercial plywood BWR grade including CP Knob (as per sample) of superior quality all as per shown on drawing and as specified.
(d) Material and labour for removing unserviceable CP knob of table by Supply and fix new CP Knob (as per sample) of superior quality as per sample approved all as directed.
(e) Preparation of old decorated / new replaced parts /surface of table dressing gents smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Dressing mirror gents FD/E6/MAP/16
(a) Material and labour for removing of unserviceable mirror of table by Supply and fix new sheet glass electro-copper plated mirror 5mm thick all as shown on drawing.
(b) Material and labour for removing unserviceable back plywood of frame by Supply and fix new back made out of 12 mm thick commercial plywood BWR grade ISI marked as shown on drawing.
(c) Material and labour for removing unserviceable glass shelves with glass holder of table by Supply and fix new 5 mm thick plain glass of superior quality with glass holder all as specified and as directed.
(d) Material and labour for removing unserviceable hinges of table by Supply and fix new CP piano type hinges of superior quality all as shown on drawing and as specified.
(e) Material and labour for removing unserviceable magnetic catcher by Supply and fix new magnetic catcher of superior quality as per sample approved all as shown on drawing and as specified.
(f) Preparation of old decorated / new replaced parts /surface of dressing mirror gents smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Teapoy FD-382
(a) Material and labour for removing unserviceable top of Teapoy by Supply and fix new top made out of 18/19 mm thick pre laminated particle board one side white and other side decorative choice lamination exterior grade including well seasoned hard wood edging 6 mm thick free from cracks and knots duly French polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.
(b) Material and labour for removing unserviceable stiffener of Teapoy by Supply and fix new stiffener made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(c) Material and labour for removing unserviceable leg of table by Supply and fix new leg out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(d) Material and labour for removing unserviceable hard rubber shoe of Teapoy by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(e) Preparation of old decorated / new replaced parts /surface of Teapoy smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Teapoy C3/MO/SP/202/MO/29
(a) Material and labour for removing unserviceable top of Teapoy by Supply and fix new top made out of 18/19 mm thick pre laminated particle board one side white and other side decorative choice lamination exterior grade including well seasoned hard wood edging 6 mm thick free from cracks and knots duly French polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.
(b) Material and labour for removing unserviceable top long rail of table by Supply and fix new top long rail made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(c) Material and labour for removing unserviceable leg of table by Supply and fix new leg out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(d) Material and labour for removing unserviceable hard rubber shoe of table by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(e) Preparation of old decorated / new replaced parts /surface of Teapoy smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Table centre FD-274
(a) Material and labour for removing unserviceable top of table by Supply and fix new table top in one piece made out of 18/19mm thick prelaminated particle board of required shade exterior grade confirming to IS including hard wood edging 6 mm thick made out of 1 st class well seasoned hard wood free from cracks and knots duly French polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed .
(b) Material and labour for removing unserviceable stiffener of table by Supply and fix new stiffener made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(c) Material and labour for removing unserviceable hard rubber shoe of table by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(d) Preparation of old decorated / new replaced parts /surface of table centre smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Table centre with glass top 2 tier MEC-2911
(a) Material and labour for removing unserviceable glass top of table by Supply and fix new 8mm thick Black glass top all as shown on drawing.
(b) Material and labour for removing unserviceable leg of table by Supply and fix new leg made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(c) Material and labour for removing unserviceable long stiffener of table by Supply and fix new long stiffener made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(d) Material and labour for removing unserviceable short stiffener of table by Supply and fix new short stiffener made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(e) Material and labour for removing unserviceable hard rubber shoe of table by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(f) Preparation of old decorated / new replaced parts /surface of table centre smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Table centre C3/MEC/202/MO/24
(a) Material and labour for removing unserviceable glass top of table by Supply and fix new 8mm thick plain glass top all as shown on drawing.
(b) Material and labour for removing unserviceable top of table by Supply and fix new table top in one piece made out of 18/19mm thick plywood BWR grade confirming to IS all as shown on drawing and as directed.
(c) Material and labour for removing unserviceable hard rubber shoe of table by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(d) Preparation of old decorated / new replaced parts /surface of table centre smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Table centre MEC-177
(a) Material and labour for removing unserviceable top of table by Supply and fix new table top in one piece made out of 18/19mm thick plywood commercial BWR grade ISI marked fixed with 1.5 mm decorative lamination of required shade including hard wood edging 6 mm thick made out of 1 st class well seasoned hard wood free from cracks and knots duly French polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed .
(b) Material and labour for removing unserviceable long rail of table by Supply and fix new long rail made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(c) Material and labour for removing unserviceable short rail of table by Supply and fix new short rail made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(d) Material and labour for removing unserviceable leg of table by Supply and fix new leg made out of 1 st class well seasoned hard wood free from cracks and knots all as shown on drawing.
(e) Material and labour for removing unserviceable hard rubber shoe of table by Supply and fix new hard rubber shoe of superior quality as per sample approved all as directed.
(f) Preparation of old decorated / new replaced parts /surface of table centre smoothening by required grade of sand paper and applying one or more coats of French polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.
Side Board FD-241
(a) Taking out unserviceable top of side board and Supply and fix new top made out of pre laminated particle board 18/19mm thick (one side teak finish shade and other side white balancing lamination) with 4mm thick hard wood edging all round all as per drg
(b) Taking out unserviceable drawer and Supply and fix new drawer made out of prelaminated particle board 18/19mm thick all as per drg.
(c ) Taking out unserviceable back ply of side board and Supply and fix new back made out of ply wood 6mm thick (ext gde) both side commercial as per drg.
(d) Taking out unserviceable shutter complete set and Supply and fix new shutter made out of prelaminated particle board 18/19mm thick (one side teak finish shade and other side white balancing lamination) with 4mm thick hard wood edging shutter to be fixed with mild steel chromium plated continuous piano hinges with screw steel of required size. as directed and as per drg.
(e) Taking out unserviceable side of side board and Supply and fix new side pre laminated particle board 18/19mm thick as per required size all as per drg.
(f) Taking out unserviceable shelf cabinet and Supply and fix new shelf cabinet pre-laminated particle board 18/19mm all as per drg.
(g) Taking out unserviceable Knob/Handle of shutter front of drawer and Supply and fix of new knob fancy type steel handle heavy duty of approved design as per directed.
(h) Taking out unserviceable long bottom rail of trestle portion with legs and Supply and fix of new bottom long rail of trestle portion with legs as per required size 2nd class hard wood all as per drg.
Table Dressing Ladies FD-378/FD-251/FD/MAP-II/07
(a) Taking out of unserviceable mirror of table dressing ladies and Supply and fix new mirror of size 1220x365x5mm thick fixed with hard wood framing of 45mmx40mm size with back 6mm thick plywood. All as per drg.
(b) Taking out of unserviceable top & bottom of table dressing ladies and Supply and fix new top & bottom made up of 18/19mm thick prelaminated particle board (one side teak finish and other side white balancing lamination) all as directed.
(c ) Taking out unserviceable sliding glass shutter and Supply and fix with new glass shutter of required size and thickness of glass 6mm all as shown on drg.
(d) Taking out unserviceable back ply of table dressing and Supply and fix of new back ply made of 6mm thick both side commercial as directed.
(e) Taking out unserviceable drawer and Supply and fix of new drawer made out of prelaminated particle board front side and both side 12mm plywood and bottom 6mm commercial including Knobs as specified.
(f) Taking out of unserviceable long bottom rail of trestle portion and Supply and fix of new bottom trestle portion made out of 2nd class hard wood as per drg.
Table Bed Side FD-276/ FD-28/ FD-210/ FD-248
(a) Taking out unserviceable top /bottom/shelf of table bed side and Supply and fix new top /bottom/shelf made out of 18/19mm thick prelaminated particle board with hard wood edging as directed.
(b) Taking out ply wood at back of table bed side and Supply and fix new plywood 6mm thick one side teak veneered other side commercial as per drg.
M/s National Traders (BID ID -3485149)
N N J ENTERPRISES (BID ID -3482195)
MISHON TRADING CORPORATION (BID ID -3484405)
Mahesh Traders (BID ID -3482116)
shekhar & company (BID ID -3490061)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
86020Tender.pdf
Tender Documents • 0.76 MB
BOQ_826332.xls
BOQ • 0.50 MB
Download all tender documents and submit your bid