15TH FINANCE COMMISSION 2024-2025

Amount

Conselting Geophysical Survey Quality and quantity test and transporting charges etc., Rate as adopted by the Department of TWAD

Drilling of borewells anywhere in Tamilnadu including transportation from one place to another within Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc., by first taking a pilot bore of 140mm/150 mm dia and the enlarging to required direct dia or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site (Site will be showen by the TWAD BOARD officers) Including construction of mud pit(As per TWAD SR Pg. no. 302,sl.12.ai)

Reaming bore well 200 mm Vertical bore well in Bolders area required depth by sugested depatmental officers etc.,complete(TWAD SR 2024-25. Pg.no.302. sl.no.12bi)

Supply and delivery of 200mm dia PVC Casing plain pipes (TWAD SR 2024-25 Pg.no.22.sl.no.1. II qut)

Supply and delivery of 200mm dia PVC Casing Slotted pipes(TWAD SR 2024-25.Pg.no.22.sl.no.3. II.qut)

Supply and delivery of 200mm dia PVC End cap(TWAD SR 2024-25 .Pg.no.27.sl.no.11)

Labour charges for inserting PVC Casing pipes assembly(with slots or with out slots) in the drilled hole including jointing the pipes with PVC Couplers with cement paste etc., complete, Supply and packing the Annular space with pebbles of size and quality as approved by the Exe.Engineers of TWAD Board. (As per TWAD SR 2024-25.Pg.no.304.sl.no.13a)

Charges for developing the bore wells for the entire depth with suitable Air Compressor as directed by the departmental officer and conducting yield testing the bore well Using 600c of compressor(TWAD SR 2024-25. Pg.no.305.sl.no.13b

Supply and fixing of ISI mark submersible 3 phase motor75LPM X125 mtr Head 7.5HP Pumpset 8-stage including transportation. As per IS 8034/2002( TWAD SR 2024-25. Pg.no.102.sl.no.29)

Supply and delivery of ISI mark 10HP panel board and accessories as per specification in the shedule including extre fitting suitable for submersible pump sets (TWAD SR 2024-25. Pg.no.114.(11.1)sl.no.3)

Supply and delivery of PVS insulator and sheated 4.00sq.mm 3 core flat type copper cable conforming to IS 694/1990 (TWAD SR 2024-25.Pg.no.120.(12.1)sl.no.2)

Supply and delivery of UG/LT 35sq.mm 3.5. core 1.1.KV Grade Armoured Aluminium Conductor Cross Linked Poly Ethylene insulated PVC sheathed Cable Conforming to IS 7098 /1988 and as Amended Thereafter with ISI Marking (TWAD SR .pg.no.120. sl.no.6 )

Laying of 35sq,mm 3.5 core UG/LT Cable For laying Ground level including Earth work (As per Pg.no.122.(12.3) sl.no.1

Supply and delivery of 40mm GI Pipe (B class) (TWAD SR 2024-25.Pg.no.40.sl.no.5)

Supply and delivery of 40mm GI Coupling (TWAD SR 2024-25.Pg.no.44 .sl.no.3)

Supply and delivery of 40mm Clamp set (TWAD SR 2024-25.Pg.no.44 .sl.no.24)

Supply and delivery of 50mm Non Return valve (TWAD SR 2024-25.Pg.no.45 .sl.no.2)

Supply and delivery of 40mm GI Elbow (TWAD SR 2024-25.Pg.no.44 .sl.no.1)

Labour charges for erection submersible pump set in bore well/ openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection lamps, pressure gauges upto the exteror wall of pump room and jointing the cables and twin earthing as per IE rules tec., complete and testing the pumpset and trail run for 10 days.(TWAD SR 2024-25.Pg.no.308.sl.no.17c(i)

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete ( Lower end) with 2 module 100W fan step regulator (Lower end) with 600mm down rod with fan clamp with side plates and cross arm of size 450mm (18") SD 110

supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting SD 448

Conveyance of power pumpset (centrifugal, jet and submersible)and itsaccessories fromdivisional stores to site of works. Conveyance upto 10 Kms

Wiringwith2x1.5sq.mm. PVC insulated single coreuns heathedFRLScopper conductor cableof 1100Vgrade in suitable heavygaugeMSconduit pipeonwall and ceiling with M Saccessories with150mmx100mmx75mmMS switchbox influshwithwallwith3mmthickhylumsheet cover for5A3pinnon interlocking flush type CSplug with painting of suitable colour with continuous earthwire connection of 1.5 sq.mm copper wire wire for open plug point

SupplyanddeliveryofMSKioskofsize0.75mx 0.45mx 0.75mmade up of MSangle of size 50mmx50mmx4mm alroundcoveredwith16 gauge MS sheet and kiosk door made upof MS platesof size25mmx3mmincludingcutting, welding, grinding, locking arrangements and labour charges etc.,

Supply and Delivery of 63A TPN Main Switch

Supply and Delivery of 50mm UPVC column Pipe

Supply and Delivery of TNEB Meter Board

Supply and Delivery of 50mm Male/ Female Adopter

Supply and Delivery of 63A Fuse Carrier

Earth Work for 90mm Pipe line Laying

Supply and Delivery of 90mm 6Ksc PVc Pipe

Lowering of 90mm Pipe laying

Refilling of 90mm PVC Pipe laying

Supply of 75 Lpm X 125m Head Open Well Submersible Bed Type Moter including Tranporting and all Labour Charges Etc., Complete

Supply and Delivery of 10Sqmm Copper Cable including Tranporting and all Labour Charges Etc., Complete

Supply and Delivery of 1000Ltr HDPE Tank including Tranporting and all Labour Charges Etc., Complete

M/s. SARASWATHI ENTERPRISES (BID ID -1313818)