Annual repair of DIG office building such as providing ceilling, wall panelling, flush door, inside and outside painting works etc at BAM

Providing and fixing PLAIN 5MM THICK A.C.P. PLATE CEILING suspended from roof by adjustable G.I. ceiling angle with spread at a distance not more than 600mm fixed to roof by rowl plug and stiff cleat, 5mm thick ACP plate held by G.I. perimeter channel MF-3 & intermediate channel MF-7, framing, boarding, jointing and finishing with special type of compound etc. including cost, conveyance of all materials, labour with T&P etc. complete.(excluding GST)

Providing and fixing of wall panelling made out of 12 mm thick BWR ply and 4 mm thick verner over frame made of 19mm thick vertical member placed at 2:-10''C/C wotj melamime polishing including cost of all materials labour etc complete excluding GST

Supplying fitting and fixing 30mm thick FLUSH DOOR both side skin moulded at in back and the size of outer frame being of 33 x 57 mm. Accessories/gaskets are to be used as per the manufacturers supply and specification like handle, lock and floor spring of approved quality including cost conveyance and labour with T&P etc. complete. (excluding GST)

Providing fitting and fixing of cup board using 19mm thick water proof ply laminated with both side sunmica using adhesive for pasting and fitting with modul tip cup boosher for using as top and bottom drawer, resting on GI channel laminated top using fixing 12mm thick glass for sheves 4 nos etc including cost conveyance laour with T&P etc complete. Excluding GST

Providing fitting and fixing of ALLUMINIUM JALLY 3 x 3 as partition walling OEL aluminium anodized section no. 9210 and 9207 as single groove and double groove respectively and horizontal and vertical member and OEL section 4660 as tapered clip for fixing up 3 x 3 aluminium jalli and jointing angle no. 1855 etc. with cost of all materials, labour, cess etc. complete. (excluding GST)

Supplying fitting and fixing STAINLESS STEEL OF 304 GRADE in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 meter c/c and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. complete including cost conveyance of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge (excluding GST)

Supplying fitting and fixing of Door closer of approved quality including cost, conveyance, of materials and labour with T&P required for the work etc. complete as per the specification and direction of the Engineer-in-charge.(excluding GST)

Supplying fitting and fixing of rooller blinder r of approved quality including cost, conveyance, of materials and labour with T&P required for the work etc. complete as per the specification and direction of the Engineer-in-charge.(excluding GST)

DISMANTLING brick or stone masnory in lime or stone mortar under 3m height and removing the debris within 50m lead including stacking the useful materials for reuse with cost of all labour and T&P required for the work etc. complete(excluding GST)

12 mm (1/2) thick cement plaster (1:6) finished smooth to outside/inside brick walls after racking out the joints including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T&P required for the work etc. complete. (excluding GST)

Providing fitting and fixing plain formed METASHIELD (CRILL STEEL SHEET) standard back cost coloured 0.5 nominal TCT 600mm in standard length at 300mm with supporting steps jointing materials etc. including cost of all materials, machineries, T&P etc. Metashield EPG-10 Grace special polyester colour coating of 20 micron DFT on exposed surface and 5 micron DFT on unexposed surface over 5 micron DFT of special primer on both surface on OCRCA steel of minimum yield strength 240 mpa with hot dip zinc coating moss of 120gm confirming to IS 277 etc. including cost conveyance of materials and labour with T&P required etc. complete.(excluding GST)

DISMANTLING of old tiled flooring and removing the debris within 50m lead including stacking the useful materials for reuse with cost of all labour and T&P required for the work etc. complete (excluding GST)

Fixing of vitrified tile of premium grade having thickness of 8mm to 10mm confirming to IS 13756 of 60cm x 60cm size in FLOORS and landing on 25mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigments to match the inside shade of the tile including rubbing, polishing etc. complete including cost conveyance of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST)

Wall painting two coat with PLASTIC EMULSION PAINT of approved shade and approved make to give an even shade after scrapping old paint with scrapper, washing with soda water including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. (excluding GST)

Painting two coat with any approved paint to old WOOD work and iron work including sand papering to polishing the surface smooth with cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(excluding GST)

Wall painting two coat with WEATHER COAT of approved shade and approved make over a coat of primer to give an even shade after scrapping old paint with scrapper, washing with soda water, priming with approved new primer including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. (excluding GST)

Finishing wall surface of walls with acrylic WALL PUTTY (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. (excluding GST)

Providing and fixing of 110 mm dia upvc window of approved quality and approved make confirming to ISI with necessary bends and clamps etc complete fixed to walls with nail etc as per the direction of engineer in charge including cost of all materials with taxes labour T&P etc complete. Excluding GST

Please Enable Macros to View BoQ information