Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.1 LAccepted-AOC | L1 | Accepted-AOC FOUND LOWEST TENDER WILL BE ACCEPTED IF REASONABLE | |
| 2 | L2₹41.3 L+₹3.2 L (8.53%)Rejected-AOC | L2 | Rejected-AOC NOT LOWEST | |
| 3 | L3₹41.7 L+₹3.6 L (9.40%)Rejected-AOC | L3 | Rejected-AOC NOT LOWEST | |
| 4 | L4₹41.9 L+₹3.9 L (10.1%)Rejected-AOC PLOT NO 46 P T COLONY TRIMULGHERRY HYDERABAD TELANGANA 500015 | HYDERABAD | TELANGANA | 500015 | L4 | Rejected-AOC NOT LOWEST | |
| 5 | L5₹44.6 L+₹6.6 L (17.3%)Rejected-AOC NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L5 | Rejected-AOC NOT LOWEST |
Tender Value
₹48.3 L
EMD Value
₹96,620
Closing Date
12 Dec 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI MAHAVIR SINGH, IDSE, GE (SOUTH)
GARRISON ENGINEER (SOUTH), MUDFORT, SECUNDERABAD PIN - 500003
SPL REPAIR TO TOILETS AND BATHROOMS OF VARIOUS WARDS DEPTS AT MH SECUNDERABAD UNDER GE SOUTH SECUNDERABAD
2022_MES_562975_1
GE(S)/SEC/TOKEN-27 OF 2022-23
Open Tender
Civil Works
Item Wise
270 days
GE SOUTH, MUDFORT, SECUNDERABAD
For Enlisted contractors class D and above category a (i) and b (i) and for unenlisted contractors meeting the eligibility criteria of above class and category for along eligible class with EMD
5 documents required · 5 mandatory
₹500
GE SOUTH, MUDFORT, SECUNDERABAD
₹96,620
Yes
16 Feb 2023
14 Nov 2022
14 Dec 2022
14 Nov 2022
12 Dec 2022
29 Nov 2022
14 Nov 2022 - 27 Nov 2022
Amount
Demolition of cement concrete in floors and pavings n.exc15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for 25 mm thick plain cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as below floor finish complete all as specified.
M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (40 mm graded aggregate) as in subbase of floor complete all as specified and directed.
M&L for PCC (1:3:6) type C2 ( using 40 mm graded aggregate) as in plinth protection of average 75mm thick including finishing cement concrete surface even and smooth complete all as specified and directed .
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as directed by Engr-in-Charge.
M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as directed by Engr-in-Charge.
Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.
Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed
Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified.
M&L for rendering 15mm thick on fair faces of brick works in cm 1:6 finished even and smooth without using extra cement complete all as specified.
Material and labour for rendering 5mm thick in cement mortar (1:4) with WPC over a layer of 10 mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces over applying three coats of white wash on wall surfaces complete all as specified and directed.
Material and labour for preparation of old surfaces of walls incl filling all cracks with approved crack filler and applying one coat of white wash complete all as specified and directed .
Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each incl steel window, ventilators etc complete all as specified.
M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions all as directed by Engineer-in-Charge.
S&F Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Srame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing.
S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin Type C-21complete all as specified.
S&F 150mm size aluminium anodised handles, fabricated type complete all as specified.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified.
S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and aerage width of aperature 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified.
S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' type, incl. 10 litres, PVC flushing cistern, L L, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottem, & cover & M S, CP or aluminium hinging device, complete all as specified and as directed.
S&F in repair Vitreous china orrisa pan squatting pattern 580 X 440mm with integeral foot rests including lime concrete. P or S trap, PVC low level flushing cistern 10 ltrs capacity complete as directed by Engr-in-Charge.
S&Fin repair vitreous china wash basin white flat back size 550x400 mm including cutting for and pinning in ends for bracket, fitting with piller tap 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or with out letter 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and waste fittings 32 mm including waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed
S&F in repairs 15 mm dia 45 cm long PVC water connection with PTMT nuts and washers complete all as specified and directed.
S&F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed.
S&F in repairs GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes complete all as specified and directed.
S&F in repairs GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes complete all as specified and directed.
S&F in repairs GI pipe medium grade 40 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes complete all as specified and directed.
S&L in repairs CI floor trap with grating incl jointing to waste pipe with dia of outlet 75mm complete all as specified and directed.
Demolition and beaking up drain AC pipes/PVC pipes set in cement mortar of any dia and size complete all as specified and directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm complete all as specified and as directed.
S&F PVC (SWR) bends 110 mm complete all as specified and directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm complete all as specified and as directed.
S&F PVC (SWR) bends 75 mm all as specified and as directed.
Supply and fix110 mm bore PVC (SWR) junction single ( single 'T') equal or unequal complete all as specified .
Supply and fix 110 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed .
S&F in repair stop valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) all as directed by Engr-in-Charge.
S&F in repair angle valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) all as directed by Engr-in-Charge.
S&F bib tap 15 mm bore, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
Supply and fix CP health faucet with 01 Mtr tube and hook complete all as specified.
Dismantling water tanks of exc 1000 but n.exc 2000 ltr capacity and removing to store complete all as specified and directed.
S&F of rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 2000 Ltrs complete all as specified and as directed.
Dismantling water tanks of exc 500 but n.exc 1000 ltr capacity and removing to store complete all as specified and directed.
S&F of rotational moulded poly thylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs complete all as specified and directed.
S&F in repairs Gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.
S&F 20 mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.
S & F Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union.
Dismantling AC corrugated or semi corrugated etc sheets in roof coverings complete all as specified and as directed.
M&L Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as on roof covering/ridges fixed with self tapping screws complete all as specified and directed.
Dismantling timber scantlings in unframed work 40 sq. cm and over in section fixed in any position complete all as specified and as directed.
S&F Rolled sections of grade Fe 410W (Gde E-250)as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.
S&F steel ventilators with pressed steel frame and top hung shutter including projecting/box type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.
S & F 4 mm thick Figured glass, pin headed type in squares not exceeding 0.5 Sq. M in each pane.fixed to aliminium frame work complete all specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.
Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.
M & L for Surface Conduit Point wiring with 1.5 Sq mm copper conductor single core PVC insulated cable FRLS type 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for: (a) One light point controlled by one, one way switch 5A, SP
(b) One ceiling / exhaust fan point controlled by one, one way switch
(c) One 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board
S & F Switch piano type single pole one way flush type 5 Amps capacity 230 volts.
Supply and fix socket outlet flush type multipurpose 2/3 pin 5 amps, 230 volts all as specified
S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified.
S & F wall mounted box type LED of 20 watt of size 4 ft with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with 2 Nos round blocks with necessary fixing arrangements and connecting to the point wiring with necessary flexible copper conductor multistranded three core of suitable length & size from fitting to the ceiling rose complete and as directed by Engr-in-Charge.
S & F wall mounted LED batten of 09 watt of size 2 ft with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete all as specified and directed by Engg-in-Charge.
Supply & fix Exhaust fan metal body with four blades of minimum 225 mm sweep with louvers and plastic nets on outside of wall and connecting up with PVC insulated copper conductor multistranded cable of suitable size and specification as provided by the manufacturer/company from ceiling rose to connector complete all as specified and as directed by Engr-in-Charge.Make:Crompton Greaves,Almonard,Bajaj or qequivalent
M&L for cutting of wall in round shape irrespective of height of building using machine cutting only and making opening suitable for mounting of 225 mm dia exhaust fan and making good disturbed surfaces along with premoulded block of 9'' hole matching with existing colour including grouting of nuts and bolts and clearing the debris and making the work area clean all as specified and directed.Note: Contractor to check the site requirement.
Taking down the geysers of any capacity from its mounting position by removing water and electric connections and deassembling the geyser and carrying out the following works, (a) Complete examining of geyser for leak .(b) Examining the water tightness of storage tank after cleaning. (c) Examining the physical condition of thermostat,base assembly fusible plug and outer tank for its serviceability. (d) Inspection and replacement of pilot lamps.(e)Supply & Fixing of new rubber PVC gasket to ensure water tightness for 25/50 Litres capacity and mild steel base plate cup of any type with screws of suitable size ,fix new heating element of suitable type of 1.5/2 KW rating including rubber washers ,fix new thermostat ,fix new PVC connecting tube of 450mm long with two brass adopters suitable for hot/cold water of 15mm dia pipe , supply and fixing of steel inner tank of 25/50 litres capacity geyser (if the inner tank is broken and water leaks). (e) Reassembling the geyser parts and testing including checking all electrical system(ensuring there is no current leakage) and also conducting hydraulic testing. (f) Re-fixing the geyser and making eletric connections,inlet and outlet water connections and testing and checking of all water inlet,outlet valves connected with geysers and painting of geysers of capacity 25/50 litres after scraping,cleaning and preparing surface for painting and painting with two coats of white enameled paint of approved make etc complete.
S and F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified.
S & F MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 20 Amps complete all as specified and directed by Engg in Charge
S&F Metal Clad Socket 3 Pin 20 Amps industrial type with plug top and MCB SP 20 Amps all enclosed in sheet metal enclosure complete all as specified and directed .
S & F MCB SPN 230V suitable for fixing on MCB DB of capacity 40 Amps complete all as specified and directed by Engg in Charge
M & L for Submain wiring with two single core 4 Sq mm PVC insulated FR copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC concealed conduit and conduit accessories of 25 mm dia medium grade including running up of 4 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.
M & L for Submain wiring with two single core 6 Sq mm PVC insulated FR copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC concealed conduit and conduit accessories of 25 mm dia medium grade including running up of 6 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.
S & F Security Lights of 1x25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed by Engg-in-Charge.
M & L bracket made out of GI pipe of suitable dia not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat of suitable size thick complete with MS nuts, bolts and washers etc bent to required shape complete all as specified and directed by Engg-in-Charge
Supply & Lay on wall/in ground/on pole ISI marked XLPE insulated armoured, heavy duty, electric cable with aluminium conductors 1100 volts laid in trenches, floors, ducts, pipes drawn across the road/paths/drain/along poles/walls/floor/equivalent etc including jointing & testing complete all as specified of size 2x 10 sqmm
Excavation in trenches not exceeding 1.5 mtr width and not exc 1.5 mtr in depth and getting out in hard /dense soil for laying / repairing of LT cable / GI pipe.
Supply, spread M sand/coarse aggregate sand of approval in cable trenches providing for cable cushioning as directed. NOTE :- Punned thickness of sand only will be measured and paid.
Removal of surplus soil to a distance not exc 50 mtrs away and depositing where directed at a level not exc 1.5 mtr above the starting point.
Returning , filling incl spreading levelling watering and well ramming in layers not exc 25 cm thick.
S& Lay PCC cable covers for LT cable protection, Class LV, Type 1 of size 250x150x40mm
S& Lay GI tubing light grade in protection of cable at roads crossing/hard standing/pole protection fixed with clamps as per site requirement etc all as specified and directed 40 mm dia.
Cutting of bituminuous road / hard standing of size not exceed 30 cm in width and not exceeding 90 cm in depth for laying of UG cable/protection Pipe including making good the disturbed portion so as to match with the existing finishes with PCC 1:2:4 type B1 concrete all as specified.
NEWS CONSTRUCTIONS
K LAKSHMAN SINGH AND CO
PARDEEP AND CO
S.R.M.K Enterprises
STANDARD AGENCIES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .