PROVN OF UPS ROOM AT RADAR HEAD, PROVN OF PGI SHEET OVER PERIMETER WALL AT VARIOUS LOCATIONS,PROVN OF CONCERTINA COIL FOR DOUBLE FENCING, REPAIR/RENOVATION OF BPI ROOM AT POWER HOUSE, EXTENTION OF EXISTING POL STORE AT RADAR, ADDN/ALTN TO CERTAIN SMQ

Amount

B/R Works Excavation in trenches, n. exc 1.5 m wide and n exc 1.5 m in depth in hard/dense soil for foundation and getting out, complete all as specified and as directed.

M&L for cement concrete (1:4:8), type D2 (using 40 mm graded crushed stone aggregate) as in sub base, foundation, filling and mass concrete, complete all as specified and as directed.

Demolition of brick work in any position, built in cement morter complete all as specified and as directed.

M&L for Brick work with sub class "B" bricks, straight or curved on plan n exc 6 m mean radius built in CM (1:6), complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and as directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the strating point., complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), roughf finished surface etc complete all as specified and as directed.

Use and waste of formwork to edges of concrete in roof slab, PCC band in walls for rough surface exc 10cm but n.exc 20cm complete all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

M&L for reinforced concrete (1:2:4) (Nominal mix) type B1 (using 20 mm graded crushed stone aggregate) for slabs suported on wall, column & beams in floors etc complete all as specified and as directed.

Ditto all as per item No. 10 described here-in-before but for lintel and chajja, complete all as specified and as directed.

M&L for MS steel TMT bars 10mm dia and over, cut to length, bent to shape, required, including cranking, bending spirally as required, hooking ends, binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Ditto all as per item No. 12 described here-in-before but 6 to 8mm dia bars

Ditto all as per item No. 12 described here-in-before but 5 to 10 mm dia bars as in stirrups, spacers and binders

M&L for sand fillings under flloor or in foundation including watering and consolidation, complete all as specified and as directed.

M&L for damp proof course using PCC (1:2:4), type B-0, 40mm thick and including applying a court of blown type bitumen at the rate of 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete all as specified and as directed.

M&L for 100mm thick cement concrete (1:4:8), type B-2 (using 40 mm graded crushed stone aggregate) as in sub-base to floor etc complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster in CM (1:6) on fair faces and other faces of brick works or concrete surfaces, finished even and smooth w/o using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster in CM (1:4) on fair faces and other faces of brick works or concrete surfaces, finished even and smooth using water proofing compound as per manufactures specification complete all as specified and as directed. (Note: WPC shall be measured and paid saperately)

M&L for rendering 10 mm thick cement plaster in CM (1:3) on RCC Ceiling, finished even and smooth w/o using extra cement, complete all as specified and as directed.

M&L for three coats of white wash on wall surfaces including preparation of newly plaster surfaces etc complete all as specified and as directed.

M&L for three coats of white wash on ceiling surfaces including preparation of newly plaster surfaces etc complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint to achieve uniform and smooth surface having no sign of brush marks complete all as specified and directed. Make of Cement Base paint : SNOWCEM/ASIAN PAINTS/DUROCEM/BERGER

M&L for 75mm thick cement concrete (1:3:6), type C2 (using 40 mm graded crushed stone aggregate) as in plinth protection etc complete all as specified and as directed.

M&L for coloured, rubber pressed glossy type precast concerete tiles 25 mm thick of glass fibre reinforced vibro compacted any shape and size laid over and including 20 mm thick cement screed in CM 1:6. Complete all as specified and as directed.

M&L for 100mm thick cement concrete (1:3:6), type C2 (using 40 mm graded crushed stone aggregate) as in sub base to flooring etc Complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without tacking off shutters from the frames) exc. 1.5 sqm but n.exc 4.0 Sqm each, Complete all as specified and as directed.

S&F steel rolling shutters (1.25mm thickness of laths), without ball bearing, as specified including top cover, anchoring rod, hasp, and staple and one shop coat of primer errected in position as indicated including necessary arrangements for fixing in walls complete all as specified and as directed.

S&F Safety lever lock mild steel with 4 levers for rolling shutters etc Complete all as specified and as directed.

S&F Ball bearings for rolling shutters etcComplete all as specified and as directed.

M&L for Machine cut kota stone slabe flooring 18-20mm thick laid over 15 mm thick cement screed base in CM (1:6) and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polished (garnite finish) Complete all as specified and as directed.

M&L for factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer Complete all as specified and as directed.

M&L for factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer Complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed

M&L for vitrified ceramic tiles double charged 10 mm thick (square/rectangular) area of each tile exceeding 0.36 but not exceeding 0.42 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick cement screed bed in CM 1:4, complete all as specified and as directed.

Ditto all as per item No. 35.00 described here-in-before but in skirting/risers/dados etc. over and including 10 mm thick rendering in CM 1:3 complete all as specified and as directed

M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded coloured PVC ’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of single side prelaminated PVC sheet to be fitted in the MS frame welded/ sealed into the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification complete all as specified and as directed.

S&F Factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of 5 mm thick plain colour PVC sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided throughout the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical member & minimum 02 Nos. for horizontal member), complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and as directed.

S&F SS butt hinges, medium weight 100mm size complete all as specified and as directed.

S&F aluminium handle cast type anodised, 125mm long complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:4 finished even & smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces on walls and applying two coats of oil bound distemper over a coat of alkali resistant primer to achieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed. Make of oil bound distemper : Asian paints (Tractor)/ ICI Dulux/ Nerolac paints/ Berger (Bison)

Taking down aluminium door shutter of any size upto 4 Sqm each and replacement of defecting pivot with new pivot & refixing in position complete all as directed.

Taking down aluminium door shutters of any size upto 4 Sqm each replacement of defecting floor spring with new floor spring and shutter refixing in position complete all as directed. Make : Amar/Sandhu.

S&F in repair dead lock 6 lever brass for aluminium door shutter complete all as directed.

Taking down old broken glass from aluminium door, window or partition panel by removing glass clips and S&F glass ordinary 5.0mm thick in any size and refixing the glass clips in position after replacing rubber gasket complete all as directed.

Ditto all as per item No. 31 described here-in-before but on vertical surfaces over and including 15mm thick rendering in CM 1:3 complete all as specified and as directed.

S&F powder coated aluminium frame work for doors, windows, partitions etc incl grill for windows etc with one or more rebated section incl jointing cleats for fixing etc complete all as specified and as directed.

S&F powder coated anodised aluminium door shutters, partition wall, aluminium section weighting 0.55 Kg/Rm incl necessary joining cleats glazing clips rubber neoprene packing, handles two Nos in each door, hinges anodised aluminium snap beading screws etc complete all as specified and as directed.

S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars aluminium section weighting 0.55 Kg/Rm incl necessary joining cleats glazing clips rubber packing, aluminium anodised snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1No, hinges type B-21, 100 mm long (2Nos) suitable handles (1No) complete all as specified and as directed.

S&F 12 mm thick prelaminated board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to aluminium frame work complete all as specified and as directed.

S&F double action floor spring hydraulic regulated made up of min 1.25 mm thick aluminium sheet foundation box, main body with stainless steel cover, govering pivots made of brass, other part made up of mild steel heavy duty complete all as specified and as directed.

S&F brass six lever dead lock suitable for aluminium doors manufactured by Harrison Locks or Godrej as approved complete all as specified and as directed.

S&F false ceiling with exposed GI system using “SILHOUETTE XL 15 mm (Nominal) designer Grid "Armstrong" white or Global white with black reveal and 600 x 600 x 15 mm thick prime fine fissured micro look white/coloured tiles (superfine 15mm/silhouette). Making necessary framework for AC ducting, if any and necessary cutouts for diffusers and light fittings, taping and finishing to proper line & level. M/s Armstrong ceiling complete all as per manufacturer’s instructions and as directed by Engineer-in-Charge.

Ditto all as per item No. 56 described - here-in before but ceiling tiles only

M&L for Factory made flush shutters 35 mm thick, ISI marked, solid core construction, with block board core and plywood face panels, commercial type with hot processed lamination 1.50 mm thick on both faces, of approved shade, colour and 35mmx12mm 2nd class teak wood lipping all round and exposed edges finished with two coats of polyurethene coat (PU Coat) of approved make over a coat of primer complete all as specified and as directed.

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100 mm, ISI marked, complete all as specified and as directed.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fix 150mm size aluminum handle fabricated, 'D' type, anodized ISI marked complete all as specified and as directed.

S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

Material and labour for preparation of new surfaces of wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed.

S&F 0.71 mm plain, aluminium sheeting, alloy 31000 H4 in straight flashing and on wooden doors etc as required complete all as specified and as durected.

M&L for fire resistance/non cmbustible false ceiling using 600x600x16 mm thick mineral fibre false ceiling board featiring micro perforated finely, granulated surfaces texture with and incl suprafine 15 mm edge grid tee hanging exposed system with clamp & hangers etc with and incl all necessary fittings and fixture complete. Make : DUNE - Microlook of Armstrong or equivalent

M&L for 60 mm thick fire resistant thermally insulated PUFF wall panelling of density not less than 40 Kg/cum with 0.5 mm thick GI Prepainting sheet with cam lock system complete all as directed and as per manufactirer's instructions.

M&L for fire resistance 40 mm thick injected polyurathane insulated door in white aluminium frame and aluminium hinges with necessary fittings complete all as specified as per manufactorers instructions.

Supply & fixing block board 18/19 mm thick, grade 2 quality, interior grade, commercial type fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, fixed in repairs, complete all as specified and as directed.

S&F plain fillets square, rectangular or triangular in section, 2nd class hardwood of sectional area exc 13 & n exc 25 sqcm, clean sawn, wrought finished secured with screws complete all as specified and as directed.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290 Gde-E-165, complete all as specified and as directed.

M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for ply wood, 6 mm thick, 7 No. of ply, grade BWR, type B, fixed with screws to timber frame work complete all as specified and as directed.

S&F Continuous (piano) hinges with width of flap 30 mm mild steel, bright finish or electro galvanised complete all as specified and as directed.

S&F 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and as directed.

M&L for second class hard wood wrought as in scantling framed complete all as specified and as directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.

S&F brass type handles 100 mm size cast type polished bright complete all as specified and as directed.

S&F brass 4 lever lock, cupboard grade I size 75 mm complete all as specified and as directed.

M&L for reinforced cement concrete M-25 (Design Mix), as in slabs supported on walls, beams and columns, shelves and the like work, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and as directed

Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land complete all as specified.

M&L for 25 mm thick Cement concrete 1:2:4 type B0 (12.5 mm graded aggregate) as in base of floor finish finished even and rough to receive floor bedding complete all as specified and as directed.

M&L for first quality non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in foor etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick cement screed bed in CM 1:4 complete incl circular cutting or notching and waste all as specified and as directed.

Ditto all as per item No 83 described here-in-before but in skirting/risers/dados etc over and including 10 mm thick rendering in CM 1:3 complete all as specified and as directed

M & L for first quality non skid ceramic coloured tiles 7 to 8 mm thick (squire/rectangular) area of each tile exceedin 0.11 sqm but not exceeding 0.18 sqm in floor etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick cement screed bed in CM 1:4 complete all as specified.

M & L first quality coloured glazed ceramic tiles, fixed in pattern of different colour including border of size 300x 450 x 7mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. Note :- Pattern of the tiles will be decided by GE at the time of execution.

Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc; and cuttings chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth all as specified and directed

Taking down steel tubing 15mm bore and connections including cleaning for refixing or removing to stores complete all as specified and directed

Ditto all as per Item No 88 described here in before but 20mm bore all as specified and directed

S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately.

S & F 20mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately.

S & F in repairs 15mm bore concealed stop cock, regular body with adjustable wall flange , fancy type, chromium plated cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed by Engineer - in – Charge. Make : CON-083KN of Jaquar

S&F in repaires 15mm bore angular stop cock with wall flange , fancy type cast copper alloy with capston head, chromium plated, screwed down high pressure and fixed for iron pipe with C.P. brass connection pipe with union nuts complete with C.P. brass flange including cutting and making good the walls where ever required.complete all as specified and as directed by Engineer-in-Charge. Make : OPL-15053 of Jaquar

Supply and fix in repairs Cast iron floor trap with dia of outlet 100 mm, with CP grating hinge type in kitchen and other situation including PCC 1:2:4 type B1 for setting the trap and jointing to waste pipe including taking out old floor trap , complete all as specified and directed.

Supply and fix in repairs Cast iron floor trap with dia of outlet 75 mm, with CP grating with hinge in kitchen and bath etc situation including PCC 1:2:4 type B1 for setting the trap and jointing to waste pipe including taking out old floor trap , complete all as specified and directed.

M & L gully traps salt glazed stone ware 150 x 150mm size square mould type ‘S’ or ‘P’ PCC for bed, trap and surrounds shall be 1:3:6 type C – 1 using graded stone aggregate incldg grating of cast iron all as specified and directed by Engineer - in - Charge.

Dismantling water tanks of capacity exceeding 250 and not exceeding 500 ltrs all as specified and directed by Engineer - in - Charge.

S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres all as specified and directed by Engineer - in - Charge .

M&L for decorative laminate 0.90 mm thick type1 surface finish, colour and pattern as approved, fixed with approved adhessive as per manufacturers instructions complete all as specified and directed

Roughening surfaces of old/concrete floor by picking sweeping clean with iron brush and washing down with water etc complete all as specified and as directed.

S&F Stainless steel plate rack of size 900mm x 900mm and 250mm in depth, weight not less than 6.5 kg, with all internal fittings, and fixed to wall by means of rawl plug steel screws including washers, complete all as specified. Make : Neelkanth/Nirali/Diamond

M & L for 40 mm thick Cement Conrete 1:2:4 type B–1 using 20mm graded stone aggregates flooring finished even and smooth without using extra cement all as specified and directed

M&L for brushing neat cement slurry with 3.0 Kg of cement per Sqm all as specified and directed.

S&F glass dividing strips, 3mm thick, 38mm width and inserted in position to conform to design all as specified and directed

S&F in repair china water closet Orrisa pattern, size 580x 440 mm white, with integral foot rest and cast 'P' or 'S' trap including cement concrete including connection to flushing cistern/pipe and making good disturbed portion to match existing surface complete in all respect as specified. Make Hindware

S&F in repair PVC valveless, syphonic action type, flushing cistern of 10 litres capacity, low level, white, with inlet, ball valve, float & handle including brackets and making good disturbed portion to match existing surface complete in all respect as specified

Dismantling wrought iron or mild steel work of any description all as specified and directed

Material and labour for cement concrete type B2 1:2:4 using 40 mm graded machenically crushed stone aggregate as in foundation filling or mass concrete complete all as specified and as directed

Dismantling existing old damaged barbed wire fencing & Supply and fixing in Galvanised 2 strand, steel barbed wire 2.24mm dia barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed

S & F steel work in mild steel trusses, rafters and posts etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 (grade st-240) complete all as specified and directed

S&F in repairs punched tape concertina coil 900 mm coil dia size of any type of standards,rails etc including provision of mild steel (annealed) binding wire complete all as specified and directed

S&F punched tape concertina coil 600 mm coil dia size of any type of standards, rails etc including provision of mild steel (annealed) binding wire complete all as specified and as directed

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl taking down old u/s sheet all as specified and as directed.

Supply and fixing Galvanised 2 strand, steel barbed wire 2.24mm dia barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed

S & F rolled mild steel conforming to Gde Fe 410-0 in joist, channel, angle or tee sections, fixed independently, without connecting plates etc (cut to ordinary length i.e. within 20mm of length indicated) complete all as specified and as directed

M&L for plain cement concrete (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregates as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified

Material and labour, 10mm thick cement plaster in CM (1:4) mixed with WPC as per manufacturer’s instructions @ 3% by weight of cement on concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

Cutting groove in brick wall 75 mm wide and 65 mm deep for inserting APP polymer membrane and shaping horizontal face of groove with cement mortar 1:3, including removal of rubbish outside MoD land, complete all as specified.

Material and labour, water proofing treatment of roof consisting as under :- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces (b) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm on plaster surface all as specified. (c) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregates as in mud stops, sides of interlocking tiles and similar work and finishing the surfaces even and smooth without using extra cement, complete all as specified

Supply only Integral water proofing compound

M&L for First quality, Non skid ceramic coloured joint free tiles, 7 to 8 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified.

Taking down chowkhats or frames with shutters (without tacking off shutters from the frames) n.exc. 1.5 sqm each, complete all as specified.

S&F, 4mm thick sheet glass ordinary quality & glazing with oil putty in square n exc. 0.50 sqm in each pane complete all as specified.

M&L for preparation on new plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer incl BIRLA putty brfore applying extrior emulsion paint complete all as specified and as directed.

Preparation of old steel or iron surfaces over 10 cm width or girth not other wise described and applying one coat of synthytic enemel paint (of approved shade) , complete all as specified and directed.

M&L for greasing and servicing (overhaulling) of steel rolling shutter of mannual type of any size incl greasing and survices of ball bearing, hood cover anchoring rod hasp and staple complete all as specified and directed by engineer in charge.

E/M Works Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating invertor A C with EER 3.2.of capacity 1.5 TR . Make- Hitachi, LG, Voltas, Blue Star or equivalent make.

Supply and fix Voltage stabilizer for automatic operation with digital display, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4.0 KVA. Make- V-Guard ( Cat part- VGM 500 DIGITAL), Voltas or equivalent make.

S&F SP&N enclosure with 2 pole and Earth Metal Plug & Socket complete with one single pole C series MCB of 20 Amps rating 20 A SP MCB single phase 240 v complete for AC all as specified and directed of make :- havels (Cat part- DHDPUSN020/DHDPUDP020), standard or equvalent approved make .

M & L for concealed point wiring complete with PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, with MS terminal boxes (not less than 1.6 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm multi stranded copper conductorcable of green colour as continuous earth wire with lugs and accesseries complete all as specified and directed for the followings :-

One light point controlled by one, one way switch

Ditto all as per item No 131 described here in before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant low smoke ( FRLS ) cable for 15 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and directed.

S & F sub main wiring with PVC insulated, fire retardant (FR), unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 4.0 sqmm (Nominal area) drawn into existing / new conduit of any size and type / casing-caping with and including one run of 4.0 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and directed. Note: (i) New conduit/ casing- caping and accessories shall be deemed to be included in the rate quoted by contractor. (ii) Two runs of 4.0 sqmm cable and one run of 4.0 sqmm cable of earth continuity conductor and one run of PVC pipe shall be a unit length.

S&F Modular switch 1 way 6A, 1 module complete including modular box with plate all as specified and as directed. Make:- Anchor/Havells or its equivalent make.

S&F Modular switch 1 way 16A, 1 module complete including modular box with plate all as specified and as directed. Make:- Anchor/Havells or its equivalent make.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module,all as specified and as directed. Make:- Anchor/Havells or its equivalent make.

S&F Modular Ceiling Rose three terminals complete all as specified and as directed.MAKE- LEGRAND,PLAZA ,Anchor

S&F 20W LED tube light fitting 1x20 Watts 1150x25x40 dimension having CCT 5700 K,220 to 240 volts with polycarbonate /extruded aluminium alloy/powdwer coated CRCA sheet housing,bipin holder connector block etc complete withall accessories internally prewired and including connecting up with twin core twisted flexible conductor cable of suitable size all as specified and directed. MAKE-HAVELLS (Cat part- LUMILINEBS20WLED865SPCWH), CROMPTON GREAVES, OSRAM and its equivalent model.

S & F 2'x2' T5 grid ceiling fitting with Ultra modern designed architectural 2'x2' 28W LED luminaire which Provides soft light and glare free symmetrical illumination suitable for Armstrong /Grid ceiling. integtated elecronic driver etc,complete with all accessories internally pre wired and including connecting up with twincore twisted flexible copper conductor cable with suitable size.complete all as specified and as directed.Cat Part No LHEWEIP7PW1W028 Make :- Havells or equivalent in PHILIPS,Crompton Greaves.

S&F sheet metal enclosure double door suitable for distribution boards when MCBs to be used having 100Amp rated bus bar Triple pole and neutral 4 way 415Vcomplete all as specified and as directed.

S&F MCB single pole 6 to 32 Amps 240 V,10KA, 'B' series,complete all as specified and as directed.

Supply and fix Tripple pole MCB 63A, 10KA as per Cat No SE-A9F84340 of Schinder or eqvt in Legrand,Havells.

S&F PVC/FRP Cable Tray cover suitably screwed/fixed to wall either over the surface or within the slots made for fixing the same 100mm width and not less than 40mm along with all fitting like bend "T" , elbow,etc thickness of tray wall shall not less then 3mm.

M&L for laying in trenches/drawn through pipe/through wall/floor XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area area 16 sq. mm 4 core all as directed and as specified.

Ditto all as per item No. 146 but sec. area 25 sq. mm

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for under ground cable and getting out of disintegrated rock.

Removing excavated disintegrated rock material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point .

M&L Bricks; common burnt clay building bricks, sub-class ‘B’ designation 75 Old size bricks for the protection for underground cable.

Supply and lay in treches for fixed Wall/floor or passing through ducts GI tubi light grade of sizes 40mm for protection of UG cable with necessary fittings all as specified as directed.

M&L for carrying out horizontal boring below roads/PCC hard standing/Drain suitable Up to 50mm dia GI pipe all as specified as directed for inserting GI pipe of the following sze with a depth upto 1.5m & length of road upto 12m of the follwing size of bore.

Supply and spread clean rever sand in trenches above and below underground cable all as specified and directed .

M/S Rohit Enterprises

M/S Sanjay Enterprises

Ish Engineers and Contractors

akhil enterprises

JAIPAL and BROS