SPECIAL REPAIR OF BLDG NO (T-485, T-493 AND T-497) OF 691 COY ASC (TK TPTR) TYPE C AT HISAR MIL STN UNDER GE HISAR

Amount

Taking down chowkats or frame with shutter, without taking off shutter from the frames not exc 1.5 Sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) complete all as specified & as directed.

Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) complete all as specified & as directed.

Taking down old rusted & damaged steel windows/ventilators of any description and of any type & size with guard bars / grill including cutting holes for hold fasts & making good the disturbed portion complete all as specified & as directed.

S&F factory made single extruded WPC(Wood polymer compsite)solid door window/ceosetory windows& othr frames/chowkats of size 65x125mm comprising of virgin PVC polymer of K value 58-60(suspension grade calciumcarbonate and natural fibers (wood powder/rise husk0 and non toxic additives (maximum toxicity index of 12 for 100gms fabricated with miterd joints after applying with PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum,screw withdrawl strength of 2200N (face) & 1100N (edge) ,minimum comp ressive strength of 58 n/mm2 ,modules of elasticity 900n/mm2 and ressisistance to spread of flame of class A category with property of being termite/borrer proof ,water /moisture proof and fire retirdent and fixed in position with MS hold fast /Lugs/SS dash fasteners of required dia and length complete all as spd and direction of engr-in-charge.

Supply and fixing factory made single extruded WPC (wood polymer composite ) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (suspension grade ),calcium carbonate and natural fibres (wood powder/rice husk /wheat husk )and toxic additives (maximum toxicity index of 12 for 100gms ) having miniumum density of 650 kg/cum and screw withdrawl strength of 1800N (face) & 900N (Edge ), miniumum compressive strength 50N/mm2,modulus of elasticity 850 N/mm2 and resisitance to spread of flame of class A category with property of being termite / borer proof ,water/moisture proof and fire retardant .WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S S screws all as per direction of Engineer -In-Charge (Note : stainless steel butt hinges and necessary SS screws be paid separately)

S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (withsash bars) edges but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part-I Section 8 Clause 8.24(a), fitted to chowkats complete all as directed.

S&F butt hinges 100mm si zecast ,with mild steel hinge pin ,bright polished and fixed,type B-11 complete all as specified and directed

S&F 150mm long aluminium handle cast type anodised complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified.

S&F Powder coated Anodised aluminium frame for doors, windows ventilators and partition with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F Powder coated Anodised aluminium door, windows, vantilators, shutters/partition, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including provision for cooler or AC opening complete all as specified. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately.

M&L for MS framed work as in truss, purlins, cooler stands conforming to grade E-165 (Fe-290) or Fe-310-O of MS angle or other sections, such as grills, gratings,bracket for truss with ends of bar shouldered and / or riveted or forged into spikes; framed guard bars; railings, wind ties and like completed all as directed by Engineer-in-charge.

S&F Door closer hydraulically regulated of Aluminium (extruded section body), designation No 2, universal type, suitable for door shutter of 701 to 850mm in width and of weight between 36 to 60 Kgs complete all as specified and directed.

M&L inclding preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or gith with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F Sheet glass 4.00mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F 4 mm thick figured glass fixed with and including necessary rubber gasket and aluminium beading all as directed

S&F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples

Dismantling asbestos cement corrugated or semi corrugated sheets as in roof covering all as specified.

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

M&L for pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified all as specified.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

S&F, GI powder caoted snap grid of sizes 605 mm x 605 mm frame work for false ceiling with main tee 32x24x1mm thick, cross tee 26x24x1mm thick and wall angle 24x24x1mm thick, flange covered with PVC thin sheet including gypsum board 7-9 mm thick, duly finished surface (thin PVC layer on gypsum board as per manufacturer instructions) size 600mm x 600mm and the same to be placed in snap grid as in false ceiling and Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks complete including demolition of old brickwork all as specified and directed

Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified.

M&L for 10mm thick rendering in CM 1:6 over brick / conc wall surfaces finished to even & smooth w/o using extra cement complete.

M&L for 15mm thick rendering in CM 1:6 over brick / conc wall surfaces finished to even & smooth w/o using extra cement complete.

M&L Rough cast plaster as specified .(Rendering coat not less than 10mm thick in C:M 1:3 , while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even) on external wall upto cill height complete

M&L for preparation of newly decorated, plastered or pointed surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, washing, rubbing down and stopping of distempered surface, filling of cracks etc and applying two coats of oil bound distemper over a 1mm thick putty over a coat of pirmer complete all as specified by Engineer-in-Charge.

M&L for complete removal of old decorated, plastered or pointed surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, washing, rubbing down and stopping of distempered surface, filling of cracks etc and applying two coats of oil bound distemper over a 1mm thick putty over a coat of pirmer complete all as specified by Engineer-in-Charge.

M&L for preparing new plastered or unplastered surface of walls and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm of same make complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding complete all as specified.

S&F for non skid ceramic jointless tiles (digital) 1st quality, 7 to 8mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L for light shade Virified Creamic tiles light shade 10 mm thick (square/rectangular) polished area of wach tiles exceeding 0.42 sqm but not exceeeding 1.00 sqm in walls etc. set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat of 10mm thick cement mortar 1:6 complete all as specified and directed.

S&F superior quality SS Curtain rod, 20mm dia with and including SS bracket 2 Nos of each opening and fency type SS side knob of required shape and size 2 Nos of each opening as approved by Engr- in charge and complete all as specified and directed.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed

M&L for light shade Virified Creamic tiles light shade 10 mm thick (square/rectangular) polished area of wach tiles exceeding 0.42 sqm but not exceeeding 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or colour cement to match over 15mm thick screed bed in cement mortar 1:6 as in floors complete all as specified and directed.

Demolition of cement concrete as in ground floors and pavings not exceeding 15 cm thick below or above ground level (unreinforced).

M&L 50mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) in sub base ,floors etc

M&L for loose filling with broken bricks of gauge 40 to 80 mm complete all as specified and directed by Engr in Charge.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed,

M& L for 75 mm thick PCC flooring 1:4:8 Type D-2 (using 40mm graded crushed stone aggregate)/brick coarse aggregate as in / subbase of floor finishes complete all as specified and as directed by the Engineer-in-charge.

M&L for 75mm thick PCC (1:3:6) type B2 (using 20mm graded aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.in patchwork n exc 3.00 sqm each patch

M&L for parking tiles 10-12mm thick not exc 0.16 sqm jointed and pointed in neat cment slurry in floors with grey cement and no pigment complete all as specified and directed by Engineer-in Charge.

S&F inrepairs factory made precast reinforced cement concerte ferrow(SFRC)manhole cover of size 1200x6000mmx60mm thick duty duty HD-20grade conforming to IS 12592 complete all as specified and directed.

Taking up or down carefully 15 mm bore steel tubing and connections including cleaning for refixing or removal to store os size.

Taking up or down carefully 20 mm bore steel tubing and connections including cleaning for refixing or removal to store os size.

S&F 15 mm bore GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc.

S&F 20 mm bore GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc.

S&F PVC (SWR) 75 mm dia of outlet nahani trap/floor trap with grating including jointing with solvent cement

S &F salt glazed stone ware gully traps squre of size 150 x 150 mm including setting & jointing to drains in CM (1 ; 2) including eartwork, concrete in beds, surrounds, kerbs ettc and CI grating etc complete fixed in repairs, all as directed by Engr - In- Charge.

S&F in repairs 75 mm bore pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F in repairs 110 mm bore pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

Supply and fixing 75 mm bore PVC (SWR) bends any radius with access door complete all as specified.

Supply and fixing 110 mm bore PVC (SWR) bends any radius with access door complete all as specified.

S&F 110mm dia PVC (SWR) junction single (Single Tee ) equal or unequal

S&F in repair vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete complete all as specified and directed including taking out old one.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured , including fixing bolts etc including PVC seat cover white flat bottom including MS, CP or aluminium anodised hinges devices including PVC low level flushing cistern 10 ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S & F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe)complete all as specified and directed

S&F PVC connection 450 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified.

S&F rotational moulded polythylene water storage tanks (cylindrical vertical with colsed top) hoisted and fixed in postion all as spd and directed of 1000 ltrs capacity. Including dismantling of the tanks (Make : Sintex/Ashish of ISI marked

S&F Towel Rail 600mm long of PTMT fixed withand including Chromium plated brassscrews and wooden/plastic cleats.(Minimum weight 190gms)

S&F gun metal globe or gate valves with iron wheel head, screwed boh ends for iron pipe and fixed of 20mm dia on stone, concrete, block, slab or wall in repairs of ISI marked

S&F in repairs 15 mm dia chromium plated fancy type angle cock with wall flange consealed type of equivalent make specified here in after complete all as specified and directed.

S&F Waste coupling of PTMT(half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms)®

S&F PVC waste pipe 32 mm dia for urinal or wash basin etc complete

S&F Bib taps, castcopper alloy withcrutch or butterflyhandle, screweddown, screwed foriron pipe or forbrass ferrule andfixed

S&F in repairs 10 Itrs PVC (White) valve less cyphonic action type, flushing cistern low level with inlet ball valve float, handle. aluminium brackets for bottom support fixing with gutties embeded in wall with drilling machine etc complete all as specified and as directed by Engr-in-Charge.

S&F in repairs chromium plated Jet Spray for WC with 100 cm long PVC pipe including neccessary Gl fitting as required like toe, nipple etc all as specified and directed

S&F in reapir Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S&F in repairs Vitrous china wash hand basin, white, flat back of size 550 x 400 mm white excluding taps, and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets, PTMT waste coupling of 32 mm dia (half or full threaded )(Min wt 45 gms /40 mm -60 gms) & waste pipe as suitable complete all as specified and directed.

S&F in repair Pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe 15 mm

Dismantling of existing truss, purlins from buildings and refixing it after fabrication in the new position complete all as specified and directed

Supply and fixing Fiber Glass Reinforced plastic (FRP)Door Frames of cross section 90 mm x 45 mm havingsingle rebate of 32 mm x 15 mm to receive shutter of 30mm thickness.The minte shall be moulded with fireresistant grade unsaturated polyester resin and choppedmat. Door frame laminate shall be 2mm thick and shallbe filled with uitable wooden block in all the three legs.The frame shall be covered with fiber glass from all sides.M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing to existing door frames 30 mm thickGlass Fibre Reinforced Plastic (FRP) panelled doorshutter of required colour and approved brand andmanufacture, made h fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of easoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, omplete as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F Hollow PVC Wall Lining consisting of 5mm thick wood grained printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engineer-in-charge

M&L 16 to 18mm thick granite (of any type) slab of approvedshade as in flooring platform etc. bedded and jointed with grey cement slurry and pointed with white cement with admixture of pogment to match with shade of granite stone including cutting grinding and polishhing (mirror polish) i.e. full granite polish as per local trade practice) over and including 15mm thick screed bed (bedding layer) and full moulding edgees and setting in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks, DB, MCB etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20/25mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including sunk type pressed steel box covered with and including modular covered plate and frame for housing switch, socket, regulator etc’, complete, all as specified & directed. (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of BoQ' ).'

All as per item No 82.00 (here-in-before) but ceiling fan /exhaust fan point controlled by one Number one way switch complete, all as specified & directed.

All as per item No. 82.00 (here-in-before) but for one 5 Amp socket outlet on independent board controlled by one Number one way switch on independent board complete, all as specified & directed.

All as per item No. 82.00 (here-in-before) but for one 5 Amp socket outlet on the same board controlled by one Number one way switch on same board all as specified & directed.

All as per item No. 82.00 (here-in-before) but for one 15 Amp socket outlet by using 2.50 sqmm PVC insulated unsheathed copper conductor cable FRLS multi strand on independent bpard including provn of 2.50 Sqmm unsheathed, multi stranded copper conductor vable FRLScontinues as earth wire coneected to earth dolly etc all as specified & directed.

S&F modular type switch single pole, one way, 5/6 Amp 230 volts all as specified and directed

S&F modular type switch 1 way, 16 Amp, 230 Volts all as specified & directed.

S&F modular type socket outlet multipurpose 3 Pin 5/6 Amp (with 2 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed.

S&F modular type socket outlet multipurpose 3 Pin 15/16 Amp (with 3 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed.

S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed

S&F modular type Ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1500 mm ceiling fan etc complete all as specified and directed

S&F in replacement LED lights fitting 1x 40W, 240Volts, 50HZ regal batten for LED incl ultra bright glass LED tube light aluminium housing with very high efficiency, singel / double side connection complete all as specified and directed.

S&F in replacement street light LED light fitting 20 Watt, 240Volts, 50HZ pressure die cast housing with epoxy powder coating, IP65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 25mm dia light grade 1.5m length and fixed with MS clamps of size 40x5mm - 2 Nos, nuts, bolts and washers fixed on wall all as specified and directed.

S & F MCB SP, 6 to 32 Amps 240 Volts , 'C' curve, 10 KA, IS-8828 marked for fixing in DB complete all as specified & directed. Note :-Make of MCB shall be same of that DB.

S & F in repair of MCB SPN, 240 Volts, 40-63 Amps, breaking capacity 10 KA complete all as specified and directed.

S&F in repair of sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground leve with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 5 of 1991 (Part-1) including taking out old existing earthing complete all as directed.

Supply and fixing ceiling fans (Copper winding) complete with blades, down rods and accessories, 230V 1200mm sweep, min air delivery 210 CFM, BEE five star rated with brushless direct current motor(BLDC) with remote complete all as specified and directed

Supply , laying , jointing, testing and commissioning of 16 sqmm 2 core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors confirming to IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

Excavation in trenches not exceeding 1.5 m wide and not exc. 1.5 m depth for laying cables, foundation for pole etc and getting out in soft/loose soil etc complete all as specified and as directed. Note : 1. The rate inclusive of taking down and refixing of any type of cheqered tiles, interlocking tiles complete as per existing for good make. 2. The PCC work shall be measured & paid for separately uner respective item of Sch 'A' / BOQ

Returning filling in,. including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point etc complete all as specified and directe.

Supply and laying double wall corrugated pipe (DWC) conforming to IS 19430 Part - I of size 50mm outer dia and 38 mm inner dia complete all as specified and as directed

m/s krishna engineers1 (BID ID -3414331)

Shiva Constructin Co. (BID ID -3413802)

M/s Devendera construction (BID ID -3404848)

Balaji Construction Co. (BID ID -3406521)

malik constructions (BID ID -3413574)

VIKAS INFRASTRUCTURE (BID ID -3414185)

M/S SM BUILDER CO (BID ID -3407245)

M/s Rao Constructions, 1173 Urban Estate-II, Hisar (BID ID -3414677)

SITA RAM AND SONS (BID ID -3406605)