Cleaning of service Overhead water tanks, interlocking tiling, flooring and connected misc work in domestic area at AF Stn Jaisalmer

Amount

Galvanized steel water tubing medium grade of 15mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 15mm bore, complete all as specified and directed.

Galvanized steel water tubing medium grade of 20mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 20mm bore, complete all as specified and directed.

Galvanized steel water tubing medium grade of 25mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 25mm bore, complete all as specified and directed.

Taking up or down steel water tubing and connecting including cleaning and refixing for 15mm bore old steel water tubing and connection in new or old position including all new fittings and fixtures (wall, ceiling, floor etc) complete all as specified and directed.

Taking up or down steel water tubing and connecting including cleaning and refixing for 20mm bore old steel water tubing and connection in new or old position including all new fittings and fixtures (wall, ceiling, floor etc) complete all as specified and directed.

Taking up or down steel water tubing and connecting including cleaning and refixing for 25mm bore old steel water tubing and connection in new or old position including all new fittings and fixtures (wall, ceiling, floor etc) complete all as specified and directed.

Cutting chases, pinning in, making good to facings as original where required and pointing in cement and sand mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth in stone concrete blocks or slabs complete all as specified and directed.

Rotational moulded polyethylene water storage tanks 500 Litre capacity triple layer (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. fixed with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwed for iron pipe 20mm bore including taking down existing water storage tank complete all as specified

Rotational moulded polyethylene water storage tanks 1000 Litre capacity triple layer (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. fixed with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwed for iron pipe 20mm bore including taking down existing water storage tank complete all as specified

GI Nipple 25mm bore suitable for rotational moulded polyethylene water storage tanks complete all as specified and directed.

GI Nipple 20mm bore suitable for rotational moulded polyethylene water storage tanks complete all as specified and directed.

Ball valves, high pressure of PTMT (Polytetra methylene terephthalate) with epoxy coated aluminum rod & high density plastic ball and fly nut, screwed for iron pipe 20mm dia (minimum weight 210 gms) fixed as in repair complete all as specified and as directed.

Ball valves, high pressure of PTMT (Polytetra methylene terephthalate) with epoxy coated aluminum rod & high density plastic ball and fly nut, screwed for iron pipe 25mm dia (minimum weight 455 gms) fixed as in repair complete all as specified and as directed.

PVC Cover heavy duty for PVC water storage tank of capacity 500/1000 litres ISI marked fixed as in repair complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring finishing cement concrete surface fair and even complete all as specified and directed.

25mm thick Plain Cement Concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling coarse in flooring, finished even and rough complete all as specified and directed.

Cleaning overhead polyethyene water storage tanks of capacity 500 litre staged over RCC roof/floor slab or similar place inside/ outside buildings of any storeys by removing float valves carefully, thoroughly cleaning the tanks mechanically as per the following procedure, including removal of sluge/mud/unpotable water and other depositions to a distance not exceeding 50 metre as directed to make the tank totally dist free and finally cleaning the water tank with fresh water till water becomes clear to the enitre satisfaction of department and the same refixing of float valve complete all as specified and directed. (a) Dewatering the residual water in the tank using high capacity portable submersible pump. (b) Stirring of bottom sludge mechanically and removing off by using high pressure vaccum pump. (c) Cleaning internal surfaces of tank with high pressure air water jet using roto compressor. (d) Removing complete water using vaccum pump. (e) Spraying anti bacterial solution @ 50 litre of water with 0.25 @ litre of concentrated gramicid of 48% W/W H2O2. (f) Spraying of bleaching powder solution @ 50 litre of water.

Cleaning overhead polyethyene water storage tanks of capacity 1000 litre staged over RCC roof/floor slab or similar place inside/ outside buildings of any storeys by removing float valves carefully, thoroughly cleaning the tanks mechanically as per the following procedure, including removal of sluge/mud/unpotable water and other depositions to a distance not exceeding 50 metre as directed to make the tank totally dist free and finally cleaning the water tank with fresh water till water becomes clear to the enitre satisfaction of department and the same refixing of float valve complete all as specified and directed. (a) Dewatering the residual water in the tank using high capacity portable submersible pump. (b) Stirring of bottom sludge mechanically and removing off by using high pressure vaccum pump. (c) Cleaning internal surfaces of tank with high pressure air water jet using roto compressor. (d) Removing complete water using vaccum pump. (e) Spraying anti bacterial solution @ 50 litre of water with 0.25 @ litre of concentrated gramicid of 48% W/W H2O2. (f) Spraying of bleaching powder solution @ 50 litre of water.

Machine pressed factory made rubber moulded precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement with pigment including 25mm thick machanicaly compacted thickness of sand bedding below pavor tiles laid to required level & slope and dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

Factory made chequered cement concrete tiles, 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, over and including 15mm thick screed bed in cement and sand mortar 1:6 and dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

Machine cut kota stone slab flooring 20mm thick laid as in floors in squares or rectangular pattern laid over 15mm thick cement screed bed in cement and mortar (1:6) set and jointed in neat cement slurry and pointed coloured cement to match the shade of the slab including rubbing and polishing including dismantling floor, hearth or wall tiling including cement mortar backing complete all as specified and directed.

Machine cut Kota stone slab 20mm thick, as in skirting/dado, riser of step and pillar etc. set and jointed over and including rendering of 10mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling floor, hearth or wall tiling including cement mortar backing complete all as specified and directed.

Plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in plinth courses, parapets, railing, copings and like including weathering slightly rounded or chamfered angles and throating, necessary formwork as required etc complete all as specified and directed.

Coloured Johnson endura tiles size 300mmx300mmx10mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15mm thick screed bed in cement and sand mortar 1:6 and including dismantling floor, hearth or wall tiling including cement mortar backing complete all as specified and directed.

Coloured glazed ceramic tiles size 300x450x6 to 7mm thick as on vertical surfaces such as dado/skirting over including 10mm thick cement and sand mortar (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

Coloured Non Skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm (400x400mm) as in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm on vertical surfaces as skirting/dado etc over 10mm thick in cement and mortar (1:4) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

Vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement and sand mortar 1:6 and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified

Vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved) on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

15mm thick plaster in cement and sand mortar (1:4) mixed with water proofing compound @ 3% by weight of cement constent on fair face of brick work or concrete surfaces of wall, finished even and fair without using extra cement and including taking down cement plaster complete all as specified and directed.

15mm thick internal plaster in cement and sand mortar (1:6) on other than of fair faces of brick work or concrete surfaces or stone masonry surfaces of wall, finished even and smooth without using extra cement and including taking down cement plaster complete all as specified and directed.

10mm thick internal plaster in cement mortar (1:3) on uneven surfaces of concrete surfaces of ceiling, finished even and smooth without using extra cement including taking down old cement plaster, complete all as specified and directed.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

Precast cement concrete (1:5:8), type C-1 (using 5 part 20mm and 3 part 12.5mm graded stone aggregate) as solid block masonary exceeding 10cm in width and set in cement and sand mortar (1:6) including demolition of brick work or stone/boulder masonry built in cement mortar complete all as specified and directed.

Preparation of newly plastered surfaces or unplastered surfase of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

Preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Preparation of newly plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Vitreous china squatting pan 'Orissa Pattern' of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with P' or 'S' trap complete including jointing and making good to floor provision of PCC 1:5:10 bed as in repairs and including dismantling and taking down old unserviceable complete all as specified and directed.

PVC capacity 10 Litres valve less syphonic action type, flushing cistern low level, white coloured, with inlet, ball valve, float and handle including brackets complete with flush pipe fixed as in repair complete all as specified and directed.

Vitreous china wash down water closet pan (Pedestal pattern), white colour, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic water closet seat cover (white colour) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed as in repair complete all as specified and directed.

Vitreous china wash hand basin white colour flat back of size 550x400mm including cutting for and pinning in ends of or erecting stand including waste fitting, brass chromium plated 32mm size with longh with including a pair of cast iron brackets embedded in PCC 1:3:6 type C-1 blocks of size 10x7.5x15cm with Including dismantling and taking down old unserviceable complete all as specified and directed.

PVC connection suitable for 15mm bore with PTMT nuts of 600mm length and including taking down old unserviceable complete all as specified and directed.

Stop valve with 15mm bore (concealed type) cast copper alloy chromium plated screwed down, high pressure, screwed both ends for iron pipe or for union fixed as in repair complete all as specified and directed. Make : Jaquar, Cat Part No. CON-053KN or equivalent.

Angle stop valves, 15mm bore fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed as in repair complete all as specified and directed.

15mm bore fancy type chromium plated long body Bib taps, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor including taking down old unserviceable pipe complete all as specified and directed.

75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor including taking down old unserviceable pipe complete all as specified and directed.

PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement and jointing to waste pipe fixed as in repair in cement concrete type B-1:2:4 complete all as specified and directed.

110mm bore PVC (SWR) bend any radius provided with access door fixed as in repair complete all as specified and directed.

75mm bore PVC (SWR) bend any radius provided with access door fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) Junction Single (Single T) equal or unequal provided with access door fixed as in repair complete all as specified and directed.

Stack clamp made out of MS flat 50 mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 100mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces fixed in repair complete all as specified & as directed.

15mm bore chromium plated shower rose with or without CP arms swivel joint, 75mm dia, including fixing to steel pipe or union and fixed as in repair complete all as specified and directed.

BHAGWATI CONSTRUCTION

Manisha Enterprises

S K TRADER

Leelashah Enterprises