ANUUAL REPAIR AND MAINTENANCE OF CISF BARRACKS NUMBER 3,4,5,7,8 AND 9 IN CIVIL SECRETARIAT CAPITOL COMPLEX, UNDER C-9, SUB DIVISION, CHANDIGARH.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) DSR 13.81.1

Providing and fixing 6mm thick commercial ply (ISI marked) on the exisitng wooden members including the cost of nails, fevicols etc. including painting two coats of synthetic enamel paint over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing Colour coated profile steel sheet having total coated thickness 0.5 mm (+/-0.02mm) zine coated strong and durable fixed with J or L hooks, bolts and nuts including overlapping of sheets complete as per design approved and to the entire satisfaction of Engineer-in-Charge.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) DSR 14.5.1

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR 10.2

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 4.1.2

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. DSR 9.83

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm DSR 9.96.2

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm DSR 9.97.4

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper DSR 9.101.1

Please Enable Macros to View BoQ information