CERTAIN SPECIAL REPAIR WORKS IN BLOCK NO 73, 74, AT ZONE 11, BLDG NO P-44 CSD CANTEEN AT ZONE-4, P-85/1 TO 4 AT ZONE 6 IN AGE BR-I AREA UNDER GE BABINA

Amount

Excavation in trenches n'exc 1.5 m width and n'exc 1.5 m in depth for foundation etc n'exc 10 sqm on plan and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed.

Removing excavated material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete all as specified and as directed.

Demolition of brick work/ stone bolder built in cement mortar or cement lime mortar and as directed.

M&L for brick work with FLY ASH BRICKS , old size , straight or curved on plan exc 6 M radius built in cement mortar (1 : 6) etc complete all as specified and as directed.

Demolition of PCC in ground floor & pavings not exc 15 CM thickness below or above ground level as directed.

Taking out /Dismantling of existing roof treatment of any description , in any position including taking out old existing concrete of any description/grade upto a thickness as directed and including lowering down the broken concrete and waste materials on a place ( on ground ) where directed and removing the same to a distance exc 250 mtr but n exc 500 mtr as directed .Note : The cost of lowering down and removal deemed included in unit rtae quoted by the tenderer.

M&L for P.C.C 1:2:4 type B- using 20 mm graded stone aggregate as in padding laid to required slope on roof ( Upto three storied height) , finished even and fair complete all as specified and as directed.

Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in coping of parapetwalls and or in roof kerbs on roof chamfered on edge incl troweling slightly complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and as directed of as per manufacturer instruction. Make : Latex, Accro-1-Accro Paints, PIDILITE, CICO, FOSROC

Cleaning the surface of exiting concrete floor by sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0 kg of cement per Sqm etc complete.

M&L for applying water proofing treatment over roof with the following operations :- (a) 10 mm thick rendering in cement mortar 1:4 mixed with water proofing compound @ 200 Ml per bag of cement on concrete surfaces when concrete is stil green and surface finished even and fair (b) Applying first coat of bitumen primer conforming to IS-3384 @ 0.4Kg / Sqm on plastered surfaces (c) Applying APP based polymeric membrane 3mm thick (Minimum thickness) and weight not less than 3kg/Sqm reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over on primed surface laid with 100mm side lap/end lap on prepared surfaces as per manufacturers instructions and under strict supervision of manufacturer's tenchnical representative etc complete and as directed. (d) Applying two coats of bituminious aluminium paint @ 200 gm/Sqm etc as directed. Make : (a) M/s Texsa India Ltd, A-4/8, 1st Floor,DLF City, Gurgaon.(b) M/s MK Products India (Pvt) Ltd, 315, Thaper Chamber Kaindi Colony,Ring Road, Delhi. c) M/s Tikki Asphalt Ltd, Village Road, Bhandup (W), Mumbai – 400 078. (d) M/s IWL India Ltd, C&D Lakshmi Bhawan, 609, Anna Salai, Chennai – 600 006. (e) M/s Bengal Bitumen, B-53, Sarita Vihar, New Delhi – 110 044.(f) M/s Shalimar Tar Products Ltd, STP House, 570, Phase – V, Udyog Vihar, Gurgaon – 122 016. (g) TORCH STAR

M&L for PCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring complete all as specified and directed.

M&L for applying water proofing treatment in sunken with the following operations (a) cleaning of surface thoroughly by removing dust & dirt from sunken (b) Rendering 15 mm thick in CM 1:3 mixed with WPC on concrete surfaces of sunken floors surface finished even and fair (c ) Applying one coat of water based bitumen emulision primer @ 0.3 lit per sqm (d) Laying water proofing treatment with Non wooven polymetric memberane of weighing not less than 3 Kg/ Sqm , consisting of 90 micron centre core , HMHDPE torch applcation on memberane (e) Applying a coat of blown bitumen 85/25 @ 1.2 Kg/sqm on top of memberane etc complete and as directed. Make : (a) M/s Texsa India Ltd, A-4/8, 1st Floor,DLF City, Gurgaon.(b) M/s MK Products India (Pvt) Ltd, 315, Thaper Chamber Kaindi Colony,Ring Road, Delhi. c) M/s Tikki Asphalt Ltd, Village Road, Bhandup (W), Mumbai – 400 078. (d) M/s IWL India Ltd, C&D Lakshmi Bhawan, 609, Anna Salai, Chennai – 600 006. (e) M/s Bengal Bitumen, B-53, Sarita Vihar, New Delhi – 110 044.(f) M/s Shalimar Tar Products Ltd, STP House, 570, Phase – V, Udyog Vihar, Gurgaon – 122 016.(g) TORCH STAR Make of Bitumen : IOC, BP, HP, M/s STP Ltd, M/s MK Petro product New Delhi , Shivam Tar Product Mathura

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) laid in alternate panel , incl provoding glass strip of size 38 mm wide and 3 mm thick fixed in position as in floor , floor surfaces finished even and smooth using extra cement complete all as specified and as directed incl glass strips etc complete alla s specified and directed .

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5 mm grd agg) as in levelling course for laying tiling work etc complete and as directed .

M& L for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces , surface finished smooth and even without using extra cement etc complete all as specified and as directed.

M&L for non skid Joint free coloured ( dark) ceramic tile (Premium quality) , 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat Cement slurry and pointed in coloured cement to match over over screed bed 15 mm thick in CM 1:6 complete all as specified and directed Make : H R Johnson/Somany/Kajaria/Orient/Regency

M&L for coloured joint free glazed ceramic tiles ( Premium Quality ) 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm on vertical surfaces of walls such as skirting/dado , set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed in CM 1: 4 etc complete all as specified and as directed.Make : H R Johnson/Somany/Kajaria/Orient/Regency

M&L for 20-22 mm thick Granite stone slab work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete including dismantling of existing unserviceable stone slab and as directed.

M&L for rounding the edge of granite stone slab laid on kitchen palteform ( front side of stone slab ) , steps , and other similar etc complete and as directed.

M&L for sand cushioing to precast concrete interlocking paver block including watering & consolidation etc complete and as directed.

M&L for machine pressed precast concrete interlocking paver block of shape as approved by the GE and size confirming to IS-15658-2006 , M-35 grdae , of 60mm thickness with grey cement and RED pigment laid on sand coushioning etc complete all as specified and directed. Note : The sand shall be measured and paid seperately .Make: M/S MEHATAB TILES, Rani Shopping Centre, Bhanwar, Indore,(B) M/S NAVYA TILES, 68, NEHRU PARK, SARDARPUR,JODHPUR- 342003 Ph. 0291-2650094, 2627963(C) SAP PAVERS JODHPUR (D) SAGAR TILES SAHARANPUR (E) Star Tiles & Industries, Rama Devi, Kanpur

M&L for 75 mm thick P.C.C 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection laid in alternate panels made of 10 mm thick plywood ( Size of each panel shall not exceed 12 Sqm ) and finish the surface even and smooth without using extra cement including filling of joint with bitumen mastic ( 1 part bitumen mixed with 3 part dry sand) etc complete all as specified and as directed. Note : Cost of form work for forming joints and jointing materials deemed to be included in unit rate quoted by the tenderer.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in kerb for locking the outer side of precast interlocking paver block complete and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each and as directed .

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) but exc 1.5 sqm and n.exc 4 Sqm each and as directed.

S&F solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification, drawing and colour etc complete all as specified and as directed by EIC . Make: (A) M/S SINTEX INDUSTRIES LTD (B) M/S RAJSHRI PLASTIWOOD , INDORE- 452001 (C) M/S NANDI PROFILES (D) M/S ASHISH CANS & CONTAINERS PVT LTD, PUNE

S&F factory made solid panel PVC door shutter 30mm thick (style) constiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheet for top rail lock rail & botom rail on either side and as gap insert for top rail bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/selaed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification & drawing etc complete all as specified and as directed. Make:(A) M/S SINTEX INDUSTRIES LTD(B) M/S RAJSHRI PLASTIWOOD , INDORE- 452001(C) M/S NANDI PROFILES(D) M/S ASHISH CANS & CONTAINERS PVT LTD, PUNE

S&F, factory made plain framed paneled shutter 35 mm thick IInd class HW ( two numbers Panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated etc complete all as specified and as directed. Make : (A) M/S GOEL BROTHERS, RAIPUR. (B) M/S RAJ UDYOG BHAWAN, DUMKA. (C) M/S GOYAL INDUSTRIES CORPN, NEW DELHI. (D) M/S MP WOOD PRODUCTS 124 DHAR ROAD, INDORE – 2 (MP)(E) M/S A-1 TEAK PRODUCTS 124/1 GNT MARKET, DHAR ROAD, INDORE (MP)(F) M/S NORTHEN DOORS PVT LTD. RANIA KANPUR. (K) M/S JAIN DOORS PVT LTD, HARYANA(L) M/S SWASTIC PLYWOOD PVT LTD, JAIPUR(M) M/S VPRP ART, H-399, MINI GROWTH CENTRE PH-II SANGARIYA JODHPUR(N) M/S CHOTTHI INDUSTRIES, ZEENAT MARKET, KANPUR

S&F factory made 30mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed. Make : (A) M/S GOEL BROTHERS, RAIPUR. (B) M/S RAJ UDYOG BHAWAN, DUMKA. (C) M/S GOYAL INDUSTRIES CORPN, NEW DELHI. (D) M/S MP WOOD PRODUCTS 124 DHAR ROAD, INDORE – 2 (MP)(E) M/S A-1 TEAK PRODUCTS 124/1 GNT MARKET, DHAR ROAD, INDORE (MP)(F) M/S NORTHEN DOORS PVT LTD. RANIA KANPUR. (K) M/S JAIN DOORS PVT LTD, HARYANA(L) M/S SWASTIC PLYWOOD PVT LTD, JAIPUR(M) M/S VPRP ART, H-399, MINI GROWTH CENTRE PH-II SANGARIYA JODHPUR(N) M/S CHOTTHI INDUSTRIES, ZEENAT MARKET, KANPUR

S&F, butt hinges medium weight cold rolled, mild steel and fixed 75 mm size etc complete all as specified and as directed. Make for builders hardware fittings : (a) Elite Enetrprises Mumbai (b) Mohan metal Industries Delhi (c) Aluminium Udyog New Delhi (d) Orrisa Aluminium Product Cuttak (e) Ajanta Steel Pvt Ltd Kolkatta (f) MC Powjee & Co Kolkatta

S&F, butt hinges medium weight cold rolled, mild steel and fixed 100 mm size etc complete all as specified and as directed

S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long etc complete all as specified and as directed.

S&F aluminum anodized barrel tower bolts of extruded section & fixed 200 mm long etc complete all as specified and as directed.

S&F aluminum anodised handle cast type 125 mm size etc complete all as specified and as directed.

S&F, aluminium anodised sliding door bolts, plate type with bolt not less thatn 12mm dia with and including a minimum of 6 bolts and nuts for on bolts plate and two on staple plate and fixed 300mm long etc complete all as specified and as directed

S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 125 mm size complete all as specified and as directed.

S&F 3 mm thick sheet glass, Ordinary quality and glazing with wooden beads in square n. exc 0.5 Sqm in each pane or glazing with oil glass putty including hacking out old broken glass from wooden or steel frame surround complete all as specified and as directed etc complete all as specified and as directed Make : (a) SAINT GOBAIN(b) MODI FLOAT/MODIGUARD (c) ATUL GLASS INDUSTRIES (d) GOLD FISH (e) TRUPATI

S&F, plain, solid, straight, chowkats and frames, wrought, framed of 2nd class hardwood ( SEASONED SAL WOOD) rebated on the solid, rounded or chamfered, put together with glue pinned at joints,supplied and fixed etc complete all as specified and as directed

Supply and fixing galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of apertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed . Make : Diamond/ Kohinoor

S&F in repair Fancy type , PVC sheet coated MS conduit curtain rod 25mm dia with Fancy knob type ends and brackets complete and as directed

M&L for applying two coat synthetic enamel paint over one coat of wood primer on wood or wooden surfcaes of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed. Make : ICI Paint (Dulux Gloss), Asian paint (Apcolite), Shalimar Paints (Superlac Hi Gloss), Goodlass Nerolac paints (nerolac), Jenson & Nicholson paints Ltd (Brolac), Berger paints (Luxol Hi Gloss), Nerolac (Nerolac Full gloss)

M&L for applying two coat synthetic enamel paint over one coat of red oxide on steel surfcaes of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed. Make : ICI Paint (Dulux Gloss), Asian paint (Apcolite), Shalimar Paints (Superlac Hi Gloss), Goodlass Nerolac paints (nerolac), Jenson & Nicholson paints Ltd (Brolac), Berger paints (Luxol Hi Gloss), Nerolac (Nerolac Full gloss)

M&L for powder coated aluminium frame for doors / windows using aluminium section of suitable size with minimum thickness of section 2mm , fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size complete all as specified and directed. Note : The minimum size of aluminium frame shall be 101.60x44.50x2 mm for single shutter and for double shutter it shall be taken of suitable size as per Jindal/Hindalco/Ajit India/Indal catalogue . Make : HINDALCO/ INDAL/ AJIT INDIA/ JINDAL

S&F powder coated auminium glazed window / ventilator shutter, fixed type ,without sash bars using approved powder coated aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc complete all as specified and as directed. Note: (i) Shutter ( Glazed ) shall be fixed on frame of required size and shall be measured seperately (iii) Glass shall be measured and paid for seperately as supply only ( iii) Cost of all fittings & fixture shall deemed to be included in unit quoted rate by the tenderer . Note : The minimum thickness of powder coating shall be 50 Micron . Make : HINDALCO/ INDAL/ AJIT INDIA/ JINDAL

S&F aluminium powder coated glazed door shutter ( Single leaf ) fabricated out of approved powder coated aluminium sections , shutter having bottom rail of section size 114.50 mm x 44.50 mm x2.0 mm thick section, middle and top rail of section 84.50 mm x 44.50 x 2 mm thick section and styles of section size 84.50 mm x 44.50 mm x 2 mm thick and S&F 5.5 mm thick tinted glass in panel of shutter fixed with glazing clips , rubber gasket and powder coated aluminium snap beading so as to make air tight and including S&F aluminium powder coated handle of 150mm size 2 Nos (One on each side of shutter) , powder coated aluminium tower bolt of size 200 mm ( 2 Nos ) per shutter , mortise lock , brass body ,6 levers ( 1 No) with duplicate keys and aluminium (extruded section) hydraulic door closer regulated designation No-3 Universal type ( 1 No) & Floor door stopper ( 140 mm ) overall ,aluminium body 1 No on each shtter etc complete all as specified and as directed. Note: (i) Shutter ( Glazed ) shall be fixed on frame of required size and shall be measured seperately (iii) Cost of all fittings & fixture shall deemed to be included in unit quoted rate by the tenderer . Note : The minimum thickness of powder coating shall be 50 Micron . Make : HINDALCO/ INDAL/ AJIT INDIA/ JINDAL

S&F powder coated aluminium door double shutter ((Single leaf and Double shutter ( Glazed and Gauge )) fabricated out of approved powder coated aluminium sections , shutter having bottom rail of section size 114.50 mm x 44.50 mm x 2 mm thick section, middle and top rail of section 84.50 mm x 44.50 mm x 2 mm thick section and styles of section size 84.50 mm x 44.50 mm x 2 mm thick and S&F 5.5 mm thick tinted glass in panel of shutter fixed with glazing clips , rubber gasket and powder coated aluminium snap beading so as to make air tight and including S&F aluminium powder coated handle of 150mm size ( Two nos on each leaf ) , powder coated aluminium tower bolt of size 200 mm ( 1 No on each leaf ) , mortise lock , brass body ,6 levers ( 1 No on Glazed shutter ) with duplicate keys and aluminium (extruded section) hydraulic door closer regulated designation No-3 Universal type ( 1 No on each shutter ) & Floor door stopper ( 140 mm ) overall ,aluminium body 1 No on each shtter etc complete all as specified and as directed. Note: (i) Both the shutter ( Glazed and Gauge ) will be measured as ONE UNIT (ii) Both the shutter ( Glazed & Gauge ) shall be fixed on Single Door frame of required size and shall be measured seperately (iii) Cost of all fittings & fixture shall deemed to be included in unit quoted rate by the tenderer . Make : HINDALCO/ INDAL/ AJIT INDIA/ JINDAL

S&F aluminium anodised grill made with 10 mm aluminium square bar made to shape DG-104 including U/F/H aluminium channels / sections and apparture size max 50X50mm fixed of aluminium door/window etc complete all as directed .

Taking down steel tubing 15 mm bore and connections and removing from site and as directed .

Taking down steel tubing 20 mm bore and connections and removing from site and as directed .

Supplying, fixing, jointing and testing 15 mm dia galvanised iron tubing medium grade ISI Marked with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed Make: TATA, JINDAL, PRAKASH , SURYA

Supplying, fixing, jointing and testing 20 mm dia galvanised iron tubing medium grade ISI Marked with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed Make: TATA, JINDAL, PRAKASH , SURYA

Dismantling water storage tank of any type ( steel/HDPE ) of capacity not exceeding 500 ltrs and removing from site complete and as directed.

Dismantling water storage tank of any type ( steel/HDPE ) of capacity exc 500 ltr but not exceeding 1000 ltrs and removing from site complete and as directed.

S&F 500 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ,WHITE , ISI marked , Triple layered construction , hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed. Make : ROTAX/ SINTEX / POLYWELL / JS POLYPLAST / POLYCON

S&F 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ,WHITE , ISI marked , Triple layered construction , hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed. Make : ROTAX/ SINTEX / POLYWELL / JS POLYPLAST / POLYCON

Supply only ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in newly taken tank (minimum weight 20mm 210 gm) complete all as specified. Make : Prayag/Polytuff/Symet/Shakti

S&F in repair 20mm Gun metal globe or gate vlve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. Make : Leader/Sant/Zoloto

S&F in repair stop valve , cast copper alloy , CP , concealed with wall flange , screwed down high pressure with crutch or buttor fly handle screwed both ends for iron pipe or for unions and fixed 15mm bore.Make Parryware /ESS-ESS/Jaquar/ Hindware

S&F in repair Angle stop cock , cast copper alloy , CP , concealed with wall flange , FANCY TYPE , screwed down high pressure with crutch or buttor fly handle screwed both ends for iron pipe or for unions and fixed 15mm bore.Make Parryware /ESS-ESS/Jaquar/Hindware

S&F in repairs 15mm bore bib tap, long body , cast copper alloy ,CP with wall flange , Fancy type with crutch and butterfly handle screwed for iron pipe or for brass ferrule complete all as specified and as directed . Make Parryware /ESS-ESS/Jaquar/Hindware

S&F 15 mm bore Pillar tap ,cast copper alloy , chromium plated , Fancy type with capstan heads screwed down high pressure with or without lettered HOT or Cold with long shank and flynut ,screwed for iron pipe and fixed etc complete all as specified and as directed. Make Parryware /ESS-ESS/Jaquar/Hindware

S&F in repair vitreous china squatting pan 'ORISSA PATTERN ' ECO ' SPECIAL , WHITE of Hindware with integral foot rest (excluding flushing cistern and flush pipe ) with 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed (i) Make of IWC : Hindware Cat No.: Hindware Cat No.:Cat. No.: 20042 (58 x 44) Or equivalent in Parryware /Cera/Johnson

S&F in repair swivel shower rose cast copper alloy , CP and fixed with 15mm pipe with shower arm 15mm size, 195mm long with bend of 45 degree with wall flange etc complete and as directed . Make Parryware /ESS-ESS/Jaquar/Hindware

Supply only PVC waste pipe 32 mm bore and 700 mm long with PVC waste coupling and as directed.Make : Prayag/Polytuff/Symet/Shakti

S&F in rapair PVC connections 15mm size with PTMT nuts of length 450mm and directed .Make : Prayag/Polytuff/Symet/Shakti

S&F in repair Brass cromium plated towel rail 20mm dia, D type, 60cm long between flanges all as specifed and directed. Make Parryware /ESS-ESS/Jaquar/Hindware

S&F Soap dish , cast copper alloy , CP , fixed to wall with CP brass screws etc complete all as specified and as directed . Make Parryware /ESS-ESS/Jaquar/Hindware

S & F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, Sleek star white model of Hindware with inlet, ball valve, float and handle including brackets with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed. Make : Hindware/ Johnson/Parryware/CERA

Supply and fix in repair vitreous china wash basin white flat back size 630x450mm including cutting for and pinning in ends of brackets or erecting stand, CP waste coupling,32 mm bore PVC waste pipe of suitable length, and connection complete all as directed complete all as specified and as directed. Make : Parryware/CERA/Hindware/Johnson

S&F in repair stainless steel kitchen rack plate rack over all size 900mmx900mm make outof 1.00 mm thick stainless steel sheet complete all as specified and as directed. Make : ANJALI, BLUE STAR ,PARRYWARE

S&F in repair stainless steel sink with drainage board 1.00 mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete. Make : Nirali/ Diamond/Neel kanth/ Blue star /PARRYWARE

S & F in repair Vitreous China bowl urinal flat back small ( SPECIAL ) of Hindware with grating and union for discharge pipe, push tap (excluding flushing cistern, flush pipe and waste pipe) etc complete all as specified and directed . (i) Make of Urinal : Hindware Cat No.: 60001 (SPECIAL ) or equivalent in Parryware /Cera/Johnson

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors , 110 mm bore etc complete including taking out old unserviceable pipe all as specified and direcetd . Make : Prince/Supreme/Finolex/Reliance

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore etc complete including taking out old unserviceable pipe all as specified and direcetd . Make : Prince/Supreme/Finolex/Reliance

S&F PVC (SWR) bends any radius 75mm bore etc complete and as directed . Make : Prince/Supreme/Finolex/Reliance

Demolition and breaking drain pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side of pipe for 100 mm Internal dia of pipe

Supplying, laying, jointing and testing salt glazed stone ware drain pipe 100 mm bore ,grade ‘A’ laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed. Make : (A) Gupta Refectories Gwalior(B) Devraj Anand Ghaziabad(C) Perfect Jabalpur

M & L for complete removal of existing treatment from walls and appying two coat of cement based paint over a coat of primer over 1 mm thick wall care putty ( JK/Birla wall care putty) including prepration of surface complete all as specified and as directed. Make : Super Snowcem, Duracem, Cemplus by TATA pigments, Gutucem by Asian paints, Accrocem

M & L for complete remoal of existing treatment of any description from walls and appying two coat of oil bound distemper over a coat of primer over 1 mm thick wall care putty (JK/Birla wall care putty ) including prepration of surfaces as per manufacurers instructions etc complete all as specified and as directed. Make : Good lass Nerolac paints, Shalimar paints, Johnson & Nicholson, Asian paints, Berger

M&L for Preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparaton of new plastered surfaces of of walls and applying three coats of white wash complete all as specified and directed.

M&L for false ceiling with 9-9.5 mm thick gypsum board tiles laminated with white PVC film on face side & metalized polyster film (Aluminium foil) on the back side with all four edges sealed with PVC film ( Make : Polyshield -) (Plain) of Sanit Gobain Gyproc India Ltd /Daiken Gypsum tile of M/s Lucky Global Corp Ltd ) of size 600 x 600 mm (595 X 595 mm) fixed with clips & screws including anodised aluminium snap grid frame work for false ceiling of Tee/Angle of weight not less than 300 gm per RM with slot for fixing including necessary suspender of flat iron 25x3 mm thick or 4 mm dia bars of required length fixed in purlin of roof not exceeding 1.20 m both ways ( C /C) including all accessories as required for suspending the ceiling work and gypsum board etc complete including taking down old existing wall and ceiling board of any type including cover fillet etc all as specified and as directed . Make : Saint Gobain/Lucky Global Corp Ltd

Dismantling CGI/AC (corugated or semi corrugated) and Galvalume sheet in roofing with ridge as directed .

S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws and as directed . Make: M/s Loyed , M/s Cril Colour Roof India Ltd, M/s Ispal Indistries Ltd, TATA, Asian Colour Coated Ispat Ltd, M/S JSW Jindal

M&L Roof trusses , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includin

S&F 12mm thick prelaminated board both side laminated exterior grade fixed in pannels for aluminium door panels/ partitions and similar complete and as directed .Make : (A) KITPLY (B) ARCHIDLAM (C) GREENLAM (D) NOVAPAN (E) ECO BOARD (F) BAJAJ BOARD (G) A-1 BOARD

Taking down carefully aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete,including fixture and fitting such as switches,ceiling roses,pendents,regulators,sockets,light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of walls, Floors, ceilings etc.

Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.

M & L for concealed point wiring for One light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.60 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3mm thick ISI marked hylam sheet/ backlite sheet cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3 and matching with the existing surfaces including colour washing all as specified and as directed .

All as per item No. 94 but one fan point controlled by one switch & regulator.

All as per item No. 94 but One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

All as per item No. 94 but One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item No. 94 but One bell/buzzer point controlled by one switch

Description all as per item No 94 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F control switch flush button type 5Amp single pole, one way, AC 230 Volts, 50 Hz complete all as specified and as directed.

S&F control switch flush button type 5Amp single pole two way, AC 230 Volts, 50 Hz complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.

S&F control switch flush button type 15 Amp single pole , one way, AC 230 Volts, 50 Hz” complete all as specified and as directed.

S&F control switch bell push button type 5 Amp single pole , AC 230 Volts, 50 Hz complete all as specified and as directed.

S&F delux Fan regulator,, electronic rotary with steps ISI marked 240 Volt , 50 Hz complete all as specified and as directed.

S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed

S & F 7W LED retrofit lamp B-22 “holder base B-22, bipin type AC 230 Volts, 50 Hz with PF not less than 0.95 with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent of Havells/Bajaj/ Halonix

S&F ceiling rose,surface bakelite 63 x50mm three brass terminal, AC 230 Volts, 50 Hz , ISI marked” complete all as specified and as directed.

S&F Bell Ding Dong AC 230 Volt 50 Hz single pole complete all as specified and as directed.

M&L for Sub main wiring with PVC insulated, unsheathed Flame retardent (FR), 2 single core cable 1100 volts grade with copper conductor of size 10 sq mm (Nominal area) multi stranded drawn into conduit (Existing / new) with and including 6 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: New conduit and conduit accossories shall be measured separately.

S & F Regid non-metallic PVC conduit 32 mm dia (external) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and as directed

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar 8 ways 240 V complete all as specified and as directed .

S&F MCB single pole and neutral 40 Amp 240 V ,10KA , 'C' series, complete all as specified and as directed with copper lugs

S&F MCB single pole and neutral 63 Amp 240 V ,10KA , 'C' series, complete all as specified and as directed with copper lugs

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series,complete all as specified and as directed with copper lugs

S & F in repair 20 W LED 6000 K (4') Decorative ultra slim linear LED lighting fixture with extruded Al. heat sink, environmental friendly, energy efficent interated driver fitted and including wiring upto and terminal into existing ceiling rose complete all as specified and directed . Make: Havells cat part No LHEXBHP7PN1W020 ( LINEAR DLX ) or equivelent in Philips/Bajaj /CG.

S & F in repair 10 W LED 6000 K (2' ) Decorative ultra slim linear LED lighting fixture with extruded Al. heat sink, environmental friendly, energy efficent interated driver and fitted including wiring upto and terminal into existing ceiling rose complete all as specified and directed . Make : Havells Cat part No. LHEXBHP7PN1W010 ( LINEAR DLX) Or equivalent in Philips/Bajaj /CG.

S&F light fitting 1 x10 Watt Bulkhead luminaries with LED bulb 10 Watts, complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed Make : Bajaj Cat part no BIBWP 10 W LED or Equivalent in Philips/Havells/Wipro/Crompton

S&F in replacement , connecting and testing LED street light fitting 1 X30 W LED with pressure die cast aluminium with individual LEDs as light source and lens embedded PC cover having top opening seperate driver compartment with IP 66 protection and impact resistance of IK 07 etc complete and including 32 mm dia light grade tube bracket made to shape , 1.80 mtr length with two nos clamp of size 50mm x 6 mm with nut, bolts, washers etc including electric connection with 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto source , fixed on walls/pole complete and as directed. Bajaj Cat No. BRLEP30WLEDWH ( Edge Plus LED) or Equivalent in Philips/Havells/Wipro

S& F in replacement Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amp C Series etc complete and as directed.

Excavation in trenches in any type of soil not exe 1.5 mtrs wide and not exe 1.5 mtr in depth for laying of pipe/cables etc and getting out incl forming bottom surface to the required level/slope etc complete all as specified and directed .

M&L for sand dry ,clean free from sharp materials filling in trenches for cable protection ( 8 cm coushion below cable and 15 cm after laying of cable gently punned down to a depth of 10 cm above the top of the upper-most cable ) etc complete all as specified and directed. Note : Punned sand shall be measured and paid for.

Supplying and laying Precast concrete cable cover class LV type -I flat size 250x150x40 mm laid parpendicular to the axis of cable in trenches etc complete as directed. Make: Make: M/S MEHATAB TILES, Rani Shopping Centre, Bhanwar, Indore,(B) M/S NAVYA TILES, 68, NEHRU PARK, SARDARPUR,JODHPUR- 342003 Ph. 0291-2650094, 2627963(C) SAP PAVERS JODHPUR (D) SAGAR TILES SAHARANPUR (E) Star Tiles & Industries, Rama Devi, Kanpur

S&F tubing galvanised iron, 50 mm bore , light grade ISI marked, complete with fittings laid inj trenches/ fixed with poles etc as protection to cables complete as ditrected

Supply ,Laying and testing Cable XLPE Insulated ,sceened , PVC bedded Galvinised Steel strip or wire armoured ,electric power cables (heavy duty )1100 Volts grade with standared aluminium conductorof size 16 Sq mm 4 core to be connected to existing MCB box / Main switches complete all as specified as dircted. Note : 1100 volt Grade as per IS-7098/1988 Part-I :Make as per PS Specifications

S&F 1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape & overall PVC sheathed in service connection suspended by insulating hanger not more than 1 meter apart including 4 mm GI suspension wire one twin core cable flat or circular of size 16 Sq mm to be connected to existing MCB box / Main switches complete all as specified as directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

M/s SAS Constructions

M/S RAJ KUMAR SINGH

M/S M S Constructions

M/s Ravi Traders

M/S Ritu Tandon

gomti construction

JAI BALAJI CONSTRUCTIONS