GE/863/EWS-T-13 OF 2024-25

Amount

Taking down Chowkats or frames not exceeding 1.5 Sqm but with shutters (Without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames) complete all as specified and directed.

S & F solid PVC door frame of size 50mm X 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style ) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded colour plain PVC or channel having a PVC sheet strip of 20mm width stuch in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F for second class hardwood 35 mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers and fitted to chowkats, complete all as specified and directed.

S&F 2nd class hardwood factory made 35 mm thick pannel (two pannel) with lock rail and pannels of 9mm B.W.P. commercial ply and 12mm verneered particle board with commarcial veneered both faces, the size of rail and style as per IS-1003(Pt-I) kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed.

S & F of 30 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (b) of MES schedule part – I (Specifications - 2009) complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

All as per Ser item no. 10 here-in-before, but of length 125mm complete all as specified and directed.

S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C-21 complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F for clamps, hold fast,hook washer & similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for cutting holes in brick/block walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and directed.

M&L for providing cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in hold fast blocks complete all as specified and directed.

S & F 125mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

All as per Ser item no. 17 here-in-before, but 75mm long complete all as specified and directed.

S&F for 300mm length aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F for 150mm Aluminium handles, cast type, anodised complete all as specified and directed.

All as per Ser item no. 20 here-in-before, but of length 125mm complete all as specified and directed.

S&F for mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified & directed.

M&L for sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane complete all as specified and directed.

S&F for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Dismantaling of water tanks and removing exc 250 but n. exc 500 ltrs, complete all as specified and directed.

Dismantling water tanks of capacity exc 500 but n exc 1000 litres, including ball brass valve complete all as specified and directed.

S & F 500 Ltr capacity tripple layer Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F of PUF insulated tank of capacity 1000 Litre vertical type double layer dully filled with puf insulation of superior quality to resist in temperature -30 to +35 degree celcius alongwith hinged top lid of same material with locking arrangement and hoisted on platform complete with making pipeline connection with the following specifications:- (a) Inner tank will be double layered HDPE food grade material. (b) Outer 4 mm thick FRP jointless casing of tank. (c) Thickness of PUF insulation shall be 75 mm. (d) Minimum density of PUF insulation shall be 44 kg per cum + 10% complete all as specified and directed.

S&F for ball brass valve high pressure with polythene float and flynut , screwed for iron pipe size 20mm bore, complete all as specified and directed.

Taking up or down steel water tubing and connections including removing, 15 mm dia complete all as specified and directed.

All as per Ser item no. 31 here-in-before but 20 mm dia complete all as specified and directed.

S&F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F in repairs 15 mm bore Stop valve/ Angle cock , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs 15mm dia stop valves fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed.

S&F in repairs for PVC Connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Supply and fixed (in repair) PVC connections 45cm long and 15mm dia with chromium plated brass nuts and PVC washers on both ends, complete all as specified.

Supply and fixing in repairs, first quality , water closet (squatt pattern) including foot rest, vitreous china (white) ,first quality water closet, Orissa pattern size 580x440mm with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet, complete including fixing of flush pipe with seat and making good the disturbed floor surfaces with the provision of lime concrete bedding to match with existing and making connections serviceable, complete all as specified and directed by Engr-in-Charge.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitreous China pedestal pattern WC incl PVC seat cover and flush pipe etc complete all as specified and directed.

S & F in repairs for Health faucet (ABS Body) mild steel CP 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl fixed in position complete all as specified and directed.

Supply and fixing in repair, brass chromium plated, toilet paper holder fixed with chromium plated brass screws, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

S&F in repairs Vitreous China bowl urinal flat back size 465x355x265mm white including grating, brackets, flush pipe and union for discharge pipe complete incl fixing plug, bedding, urinal againt wall in CM 1:2 securing urinal to plug pointing around back in cement with bracket, flush pipe, grating and union for discharge pipe etc., complete all as specified and directed.

S & F in repairs vitreous china wash basin, white flat back, size 550 X 400 mm excluding taps, chain and plug and porcelain stopper but including brackets, 32 mm dia waste coupling, 32 mm dia PVC waste pipe etc., complete all as specified and directed.

S & F for 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory including plug, washers, 40 mm dia PVC waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall all as specified and directed.

S & F in repairs 20 mm dia brass chromium plated tubular towel rail, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair Towel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden plastic cleats (Min weight 190 gms), complete all as specified and directed.

S & F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair fancy type, shower rose 125mm size , brass Chromium plated, revolving type, fixed to existing steel pipe or union 15mm bore complete all as specified and directed.

S&F in repairs cast iron floor trap for 75mm bore outlet with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L in repairs for PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75 mm bore, complete all as specified and directed.

S&F in repair C.P. grating 100mm dia square/round with or without hole complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and directed.

Dismantling timber scatlings, in fillets, rails, posts, rafters, purlins, etc. under 40 sq.cm in section complete all as specified and directed.

M & L for 6mm thick (No of ply 5) plywood, grade BWR, type BB, fixed with nails to timber frame work as in ceiling complete all as specified and directed.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 3 & n.exc 6 sq.cm complete all as specified and directed.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 13 & n.exc 25 sq.cm complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, Pre painted galvalume aluminium Zinc Coating any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified all as specified and directed.

S & F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified all as specified and directed.

S&F for plain 0.63 mm thick Galvanised mild steel sheeting in ridges,hips,valley gutters drip and straight flashings (length and girth as fixed) with grade of zinc coating 120 gm/sqm, comlete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and taking rubbish off the premises complete all as specified and directed.

M&L for screed bed or bedding layer of morter 15 mm thick cement plaster 1:4 for laying floor finished to receive floor tiles complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 Sqm but not exceeding 0.18 Sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match the colour of tiles complete all as specified and directed.

M & L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

M/L for rendering as a backing coat 10mm thick in cement plaster 1:3 on stone masonry surfaces or surfaces other than fair face of brick work with rough finished to receive glazed tiles complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for laying plain cement concrete type C-1 (1:3:6) (using 20mm graded stone aggregates) as in plinth protections, 75 mm thick , finished even and smooth without using extra cement , with joints 10 mm wide and in full depth at corners and @ 3.0 metre centre to centre, filled with mastic mortar, complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in floors, including rough finished without using extra cement complete all as specified and directed.

M & L for chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over 20mm thick screed bed in cement mortar 1:4 as in floors with grey cement and pigment complete all as specified and directed.

M & L for proving cement concrete type C1 1:3:6 using 20mm graded aggregate as in roof kerb or mud stops, round on edges complete all as specified and directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Reinforced Precast cement concrete 1:3:6, type C1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc. including ashlar facings, dressed stonework and precast concrete articles and precast concrete block walling complete all as specified and directed.

M &L for pre-cast cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately as in supply only) and finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:4 on on fair faces of brick work or concrete surface even and smooth using water proofing compound (WPC) & without using extra cement complete all as specified and as directed by Engr-in-charge.

Supply only integral water proofing compound of approved brand/make, complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering complete all as specified and directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying one coat of white wash complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, holder, bell push, bell ding-dong etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down unserviceable submain wiring and service cable alongwith batten /PVC conduits etc. and making good disturbed surfaces of walls/floors and match the existing surface all as directed at site.

Taking down unserviceable main switches, DBs with MCB SP/Isolators by unscrewing form board complete all as specified and directed by Engineer-in-Charge

M&L for point wiring using approved colour coding as per IS with using approved colour coding as per IS 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC Casing Capeing with accessories having ISI mark fixed on wall surfaces / ceiling including provision PCV Box on top for fixing switches sockets etc. all as specified for one light point/ fan /Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per item No 98 here-in-before but with 2.5 sqmm copper cable for one multipin socket outlet 15 Amp, on independent board, complete all as specified and directed.

All as per item No 98 here-in-before but for one multipin socket outlet 5 Amp on the independent board, complete all as specified and directed.

All as per Srl item No 98 here-in-before but controlled with one 3 pin socket outlet 5 Amp on same board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge.

S & F switch piano type 5 Amp, 230 Volt, flush type single pole one way complete all as specified and directed.

S & F socket outlet multipin 5 Amp 230 Volt flush type complete all as specified and directed.

S & F switch piano type 15 Amp, 230 Volt, flush type single pole one way complete all as specified and directed.

S & F socket outlet multi pin 15 Amp 230 Volt flush type complete all as specified and directed.

S & F Bell push flush type 5/6 Amps complete all as specified and directed

S & F ding dong bell type AC 230 volt complete all as specified and directed.

S& F Ceiling rose, 3 terminal, PVC isolated body complete all as specified and directed

S & F LED light fitting 20W (4 feet) , 220 volt AC, having colour temperature daylight (6500K), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing surface & wall mounted LED 5W tube light fitting batten mirrorlite slim type with extruded aluminium housing alongwith 10W LED lamp PC body with all accessories all as specified and directed by Engg-in-Charge.

Material and labour for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings.

Supply and fixing LED lamp 9W backup lamp of 4 hours backup, with auto switch on mechanism in case of power failure, works as regular 9W lamp in normal mode and a 4W lamp in backup mode, energy saving upto 80%, BEE rated with all accessories all as specified and directed by Engg-in-Charge.

S & F LED light fitting 1x10W/1X12W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F for Metal exhaust AC, Single Phase 300mm sweep 1400 RPM, with louvre, complete all as per specified and directed by Engineer-in-Charge.

S&F in replacement PVC exhaust fan, Single Phase 250 mm sweep, with louvre complete all as per specified and directed by Engineer-in-Charge.

S & F sheet metal enclosure double door distribution board single pole and neutral, 12 way 240 volt complete all as specified and directed.

S & F sheet metal enclosure double door distribution board single pole and neutral, 4 way 240 volt complete all as specified and directed.

S&F in replacement MCB SPN 40 Amp,10 KA all as specified and directed by Engineer-in-Charge.

S&F in replacement MCB SP 6 Amp to 20 Amp, 10 KA. all as specified and directed by Engineer-in-Charge.

Supply, fixing and testing of highly BEE five star rated energy efficient water heater storage type, electric supplied 230 V, single phase and installed complete incl all accessories such as multifunctional safety valve, thermostat, one no. of heating element, automatic thermal cutout, fusible plug, anti-vacuum system, built-in pressure release valve, rust proof powder coated body, indicator lamps, NRV, PVC connections pipe, provn of grouting bolts in walls, etc. and all safety advices as per E-in-C's branch technical instructions and of capacity 25 Litres, complete all as specified and directed By Engr-in-charge.

S&F Service cable 16 Sqmm with PVC insulated aluminum conductor, 1100 volts grade heavy duty, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed.

M & L in replacement for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground (earth pit not less than 2.25metres deep below normal ground level) with top edge of the plate not less than 1.5meter below normal ground level ,connected to and including using galvanized iron wire of 4.0 mm thick as earthling lead by means of bolts nuts, cheek nuts and washers of galvanized iron or steel .earth plate surrounded by alternate layers packed with char coal dust and common salt ,15cm thick and 15cm wide all around bottom and top and watering pipe 20mm bore of GI light grade with funnel, wire mesh and 40mm dia GI protection pipe medium grade all as shown in electrical plate no-3 of SSR part-I and connected to earthling test point, and including testing on completion all as specified location and as directed by Engineer-in -charge. Note: 1. Suitable quantity of charcoal, common salt, funnel, GI pipe required for watering, pit & CI pit cover etc is deemed to be included in quoted rate and lead wire used beyond 7.5m from pit cover will be measured separately. 2.On testing after completion if the desired resistance is not obtained the earthing shall be re-done at no extra cost.

Schedule of Credit

M/S Gopal Singh

Kusan Enterprises

chankaya solutions

M/S Gulab Singh

PRITPAL SINGH

R B TRADERS

M/S SHIV NATH ENTERPRISES