Providing development works ( i.e external Electrical, S and f with gravel at lowlying area, Security wall lighting and approach road street light and Main Panel board room) for Construction of Sub jail Building at Tindivanam in Villupuram District.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

13.1 : Filling with Excavated Earth

37.1 : White washing 3 coats (slaked)

39 : M.s Grills

41 : Painting - New "iron work"

86 : Providing Pre-Constructional Antitermite treatment

ANNEXURE-I 2.1.1 : Supplying and filling Gravel

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

6.5.1 : Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand)

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Ground Floor

9.5.1 : Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) a. In Ground Floor

18.1 : Formwork using M.S.Sheet a.For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

29.9.1 : Floor ceramic tiles (antiskid) using Grout (Tile Joint Filler) (using crushed stone sand)

31.2.1 : Finshing the top of Terrace floor with one course of solar reflective Ceramic tiles with base concrete

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand)

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand)

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

38.6 : One coat white cement for new walls and other similar works.

38.7 : Plastic Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1 : Rain water harvesting using defunct borewell and providing perforated cover slab (M 20) a) Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

77.5 : Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

88.2.1 : Supplying and laying of polished Shahabath stone, 20mm thick (using crushed stone sand)

799 : Two coat of OBD over one coat white cement for inner walls

ANNEXURE II A1) Supplying and fixing of 4 way Horizontal type three phase and neutral TP MCB DB with Metal Door Cover with IP42 Protection

A2) Supplying and fixing of 8 way vertical type TP MCB DB with Metal Door Cover with IP42 Protection

A3) Supplying and fixing of L.T.C.T service meter board made out of 16 SWG CRCA sheet with 25mm x 6mm copper busbar

A4) Supply and fixing of 200 AMPS TPN switch fuse DOUBLE break type with HRC fuse links

A5) Supplying and fixing of 3 Nos 200 AMPS, 500 volts grade well procelin fuse unit

A6) Supply, Erection, Testing and commissioning of dust and vertical proof panel board made out of 16 SWG CRCA sheet with necessary busbar chamber cable with MS channel supports

A7) Supply and delivery 3.5 core 120sqmm PVC insulated Aluminium armoured L.T U.G. cable

A8) Supply and delivery 3.5 core 35sqmm PVC insulated Aluminium armoured L.T U.G. cable

A9) Supply and delivery 4 core 16sqmm PVC Aluminium armoured L.T U.G. cable

A10) Supply and providing the cable end terrmination of the following aluminium armoured U.G cable a) 3.5 core 120 sqmm

b) 3.5 core 35 sqmm

A11) Labour charges for conveying and fixing of U.G cable below ground level

A12) Laying of U.G cable on wall / ceiling labour charges for conveying and fixing of the aluminium armoured underground cable

A13) Run off mains with 4 wires of 10.0 sq.mm copper wire PVC insulated fire retardant single core 1.1K.V grade cable.

A14) Supplying and fixing of 1 no 250AMPS 4 pole, 500 volts changeover switch with required Top/Bottom cable box including necessary angle iron frame work etc complete

A15) Supplying and delivery of L.T cable route indicator earth work excavation connected civil works for fixing etc complete

A16) Supplying and fixing of 200A TPN main switch 3phase 440 volts metal clad re-wirable fuse unit with necessary fixing hardware etc complete

A17) Supplying and laying of 25mm x 3mm Copper flat connecting from earth pit to panels and DB etc on wall/ground

A18) Supplying and delivery of 65mm dia GI pipe 'B' class

A19) Cutting the surface earth etc., all complete

A20) Supply and providing the cable end terrmination of 4 core 16 sqmm dia aluminium armoured U.G cable

A21) Charges for fixing LED street light fittings in the existing pole/wall with required G.I pipe of 50mm dia 'B' class and accessories including required fixing clamps hard ware etc,. Complete.

A22) Supply of hot dip galvanized 7.0 mtrs. high octagonal pole confirming to ISS 875

A23) Supply and fixing of LED outdoor fittings (Light Emitting Diode) using 80W LED Focus Light Fitting with LED etc., all complete and as directed by the departmental officers.

A24) Supply and fixing of LED outdoor fittings (Light Emitting Diode) using 48W LED Street Light Fitting with LED etc., all complete and as directed by the departmental officers.

A25) Supply and fixing of 63A TPN (3 phase main) switch fuse with HRS fuse link (front operated Handle) in a suitable size M.S enclosure weather proof outdoor 130x duty powder coat paint finish

A26) Supply and fixing of Synthetic Moulded Compound Box for Street Light 1No of 16A fuse cutout 1No 30AMPS 4 way connector heavy duty for terminating 4 core 16sq.mm aluminium armoured cable

Britto Dhanasekaran