PROVN OF ADDN/ ALTERATION TO BLGD NO. T-133 AT DARABA OF 16 RR BN UNDER AGE(I) CIF (R)

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm in any type of soil complete all as specified and directed.

Removing surplus spoil to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.50m from the starting point., all as specified .

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each all as specified.

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed

Supply and fix 30mm thick plain framed paneled door shutters of 2nd class hard wood (factory made) two panels with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified .

Supply and fix 30 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete as specified and directed in SSR Part I Section 8 clause 8.24 (a), complete all as specified.

S & F in repair floor door stopper of aluminium alloy body and tongue , anodised , with hard drawn steel spring, over all length of cover plate 140 mm , complete all as specified and directed.

S & F 100 mm long butt hinges, medium wight cold rolled mild steel, complete all as specified and directed.

S & F 125 mm extruded aluminium alloy handles, fabricated type, anodisedand, complete all as specified and directed.

S & F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed,complete all as specified and directed.

S&F 300 mm mild steel oridinary rat tail rod pattern springs including roller and roller plates, complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including fixing with beads, nut bolts, welding, etc complete all as specified.

S & F 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane, complete all as specified.

M&L for Brickwork with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6) complete all as specified.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and smooth complete all as specified and directed by engr-in-charge.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and smooth complete all as specified and directed by engr-in-charge.

Demolition of cement concrete ( unreinforced) in ground floors and pavings n exe 15 cm thickness. ( below or above ground level) all as specified.

M&L PCC 1:5:10, type E-2, (using 40mm graded crushed stone aggregate) in foundation filling/sunken floor and mass concrete, all as specified.

M&L 75mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in Sub base/ plinth protection complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as foundation filling and mass concreate, complete all as specified and directed.

Reinforced cement concrete (nominal mix) in beams, cantilevers, bressummers, lintels over 1.5 m span Cement concrete B1 type, 1:2:4 mix (using 20 mm graded aggregate), complete all as specified and directed.

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, contilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough furnished surface of concrete complete flat, all as specified.

Mild Steel TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

TMT steel bars 5 mm dia and over upto and including 10 mm dia in stirrups , spacers and binders cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

M&L for mild steel rolled work as in roof trusses ( framed) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc. , conforming to grade Fe 410-S, complete all as specified and directed.

Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, confirming to Fe 290 ( gde E-165) all as specified.

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc confirming to Fe 290 ( gde E-165) all as specified.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 30cm long, conmplete all as specified.

Prepration of new or previously steel surfaces any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Dismantling of steel (Corrugated, semicorrugated, etc) sheets in roof coverings, M&L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws. Sheet colour approved by Engineer-in-Charge complete all as specified and directed.

Dismantling of steel (plain) sheets in roof coverings, S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding/ridges to wall, fixed with self tapping screws complete all as specified and directed.

S&F Mild steel framed work such as grills, gratings using square/round bar with ends of bars shoulders/welded drilling holes for fixing of guard bars all as specified.

S&F steel window/ventilator with tubular frame factory made double shutters of size 79mmx39mm,16 guage rectangular tubular frame with side hung shutter glazed and guaged with glazing bars 12x3mm flat iron incl projecting type hinges with steel handles and steel peg stay dovetailed or welded incl incluing necessary locking arrangment complete, incl one coat of red oxide primer complete all as specified and directed. (wire guage and glass shall be measured and paid seperately)

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including fillets and S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm cross tee 25 x 24mm and wall angle 24x24mm, using 4 mm thick ceiling panel laminated with PVC film on front face and foil back availabel in due drop texture as per IS-2095, part-I-1996, fixid in the grid of E-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butter fly clips all as directed and as approved by Engr in Charge.

Dismantling of floor tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F in repair stainless steel curtain rods 20 mm dia including brackets with cut hole suitable for 20 mm dia rod fixed with screws and gutties in wall, including end caps with wall ornament and fixed to curtain rod with screws of design/shape all as directed and as approved by Engr in Charge.

Preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper, white or tinted over & including a coat of primer complete all as specified and directed.

M&L for preparation of plastered surfaces of walls and applying two coats of colour wash over a coat of white wash on new surfaces.

Taking down carefully copper/aluminium point wiring (light/Fan socket or power) with complete fittings such as switch, sockets Ceiling rose pendent holders regulators etc. Removing old/UNSV material from site and making good the old disturbed surface.

M&L for point wiring concealed type with PVC insulated unsheathed copper cable FRLSH 1.5 sqmm multi stranded two single copper conductor in and including suitable size PVC conduit pipe 20 mm dia complete with all accessories and with 1.5 sqmm PVC insulated copper cable FRLSH continous earth wire, re-recessed mounting pressed steel GI sheet box 2 mm thick suitable for modular switch/socket of adequate size including iner and outer white cover plate of modular complete all as specified and directed for followings :-

One light/ ceiling fan/exhaust fan point controlled by one switch 5Amp

One socket outlet 5Amp controlled by one switch on same board.

One 3 pin socket outlet 5 Amp controlled by one switch 5Amp on independent board.

All as per Item no 43 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 4 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 4 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed.

Supply and fixing of modular switch single pole one way 6 Amps 1 module complete all as specified and directed

S&F of modular socket 6 A-2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing of modular switch single pole one way 16 Amps 1 module complete all as specified and directed

Supply and fixing of modular socket 6 A/16 amp -3/5 pin combined 2 module complete all as specified and directed.

Supply and fix in replacement of Ceiling rose surface bakelite three terminals 240 volts complete, all as specified.

Supply and fix in replacement Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings,all as specified.

S&F LED bulb, 6500K, 900lm in white colour of 9 Watt base cap B-22 with poly carbonate difusser and aluminium heat sink ,complete all as specified & directed.

Supply and Fixing of fan regulator, electronic step type heavy duty 230 volts complete all as specified and as directed.

S&F LED tubelight fitting 1x20Watt batten type fitting 4 feet long aluminium extruded housing IP-20 rated rated voltage 230 volts(operating range 140 volt to 270 volts) , 50Hz system wattage 20 Watt +/-10% ,system current not less than 102 mA ,power factor more than 0.95, system lumen efficacy 100 lm /watt ,CCT 6500K CRI more than 80, THD less than 30%, driver efficiency more than 85% complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75 sqmm 3 core all as specidfierd and directed.

S&F in replecement of Ultra slim LED light to new 36W, 6500 K LED recess mounted bakelite panel 2' x 2' luminaire suitable for surface/grid ceiling for low ceiling applications complete with tube, driver and connecting cable including making electric connection to ceiling rose or connector complete all as specified and as directed. Make:-Philips Cat Part No. RC370B LED36S-6500 G6 L60W60 PSU OD S6 or equivalent cat part of make as specified in list of make here-in-after.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Supply and fixing in replacement of sheet metal enclosure MCB distribution board SPN 16 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail, complete all as specified and directed.

Supply and fixing in replacement of MCB single pole 6 to 32 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.

Supply and fixing in replacement of MCB SPN 40 to 63 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.

Supply and fixing of MCB single pole 6 to 32 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.

Supply and fixing of MCB SPN 40 to 63 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.

Supply and fixing of exhaust fan plastic body, 250mm (10") sweep, singly phase, 230 volts 50 Hz AC, 1200 RPM, energy saving, heavy duty totally enclosed, heavy duty motor with die-cast aluminium rotor mounted on two ball bearings complete with louvers and shutters including cutting hole for fixing exhaust fan to wall and making good the distrubed surfaces (including plastering, necessary brickwork and distempering) to match with the existing specification, connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required all as required at site and as directed.

Supply, laying, jointing and testing XLPE insulated screened PVC beded, galvanised steel strip, sheathed or wire armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 16 Sqmm 2 core, complete all as specified and directed by Engineer-in-Charge.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion, complete all as specified and directed.

M&L GI Earth wire size 04 mm as earth continuty conductor.

Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I, complete all as specified and directed by Engr-in-Charge.

Steel tubing galvanized (medium grade) 40 mm bore conforming to IS-1239 for passing cable under road/floor or fixing to poles for protection of underground cable complete with Flat iron 50x6mm clamps made to shape and 12mm dia bolts, nuts and washers for fixing where required. NOTE :- Excavation and earth work shall be measured and paid separatly

M&L for Brick covering with width equal to length of brick as mechanical protection to cables with well burnt sub class ‘B’ (old size) bricks laid dry flat, complete all as specified and directed.

Supply, hanging and testing of BEE 5 star rated super energy efficient BRUSHLESS DIRECT CURRENT ceiling fan with double ball bearing, 1200mm sweep, having 3 blades, down rod, canopies, shackles, 230 volt, single phase suitable for input voltage range 140-285 volt AC, 50Hz, air delivery minimum 230Cum/min & site requirement. colour white/ complete all as specified and as directed.

Supply and fixing of wall mounting fan 400 mm sweep, heavy duty, AC single phase, 230 volts, 50Hz, power consumption not more than 60 W, aluminium blade, including mounting accessories, copper condutor multistranded flexible wire with plug top, necessary fixing arrangement i.e anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and as directed

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 12,155.00 during AOC Note:- Tenderers shall not quote for this Schedule

MEHTA OM PARKASH (BID ID -3335447)

MEELU ENTERPRISES (BID ID -3343097)

Maqsood Ahmed (BID ID -3338529)

ABINASHI ENTERPRISES (BID ID -3341831)

M/S BADRI NATH GUPTA (BID ID -3342858)