PROVN OF VEHICLE WASHING POINT AND DOME SHAPE SHED, PROVN OF CERTAIN B/R WORKS AND INSTALLATION OF BIRD PROOFING AND CERTAIN MINOR WORKS AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT-10

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified.

M&L for rolled mild steel work in tubular trusses, purlins, rafter etc (square/ rectangular/ round hollow pipe) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I S : 1161-1979 grade St.-240 fixed with angle cleats or other connecting plates etc including all necessary welding, bending, drilling holes etc for dome shape shed or as per approved pattern shed complete upto 10 mtr height all as specified.

M&L for rolled mild steel work in tubular post, columns etc (square/ rectangular/ round hollow pipe) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I S : 1161-1979 grade St.-240 fixed with angle cleats or other connecting plates etc including all necessary welding, bending, drilling holes etc for dome shape shed or as per approved pattern complete upto 8 mtr height all as specified.

M&L for cement concrete 1:3:6, type C-2 (40mm graded stone aggregate) as in foundations, filling and mass concrete, fixing posts etc complete all as specified.

M&L for preparing newly steel and iron surfaces of any description over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering (dome shape or straight), cladding to wall, fixed with self tapping screws or J hooks etc complete all as specified.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil complete all as specified.

Removing excavated material/ soil exc 100mtr but not exc 150mtr and depositing where directed at a level not exc. 1.5 m above the starting point

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement morter 1:4 complete all as specified.

M&L for cement concrete 1:2:4, type B-1 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface of walls in cement mortar 1:4 including finishing surface even and fair without using extra cement all as specified.

S&F for SFRC drain cover of size1000mm x 500mm x 70mm thick laid over existing drain complete all as specified.

M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves, platform and the like complete all as specified.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

All as per item No 15 above but 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) vertical or to batter complete all as specified.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide all as specified.

M&L for reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified.

M&L for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, welding etc and similar work conforming to Fe-290 Gde E-165

Surface excavation not exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified.

M&L for hardcore of gauge not exc 63 mm with broken stone or boulders deposited, spread and levelled in layers not exc 75mm thick, watered and rammed to a true surface complete all as specified.

M&L for 100mm thick cement concrete 1:4:8, type D-2 using 40mm graded stone agreegate as in hardstanding including making joints and finishing surface even and fair without using extra cement complete all as specified.

M&L for 55mm thick cement concrete 1:2:4, type B-1 using 20mm graded stone agreegate as in floor etc including finishing surface even and fair without using extra cement complete all as specified.

M&L for factory made machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade laid over 30mm thick sand layer complete all as specified.

M&L for factory made machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laid over 30mm thick sand layer complete all as specified.

M&L for 75mm thick cement concrete (1:3:6) type C-2 using (40mm graded stone aggregate) as in plinth protection finishing surface with even and smooth without using extra cement and making 10mm wide joints at every 1.50mtr interval and at junction duly filled with bitumen sand mastic complete all as specified

Dismantling of brick tiles single layer, mud phuska, cement plaster, padding etc on roofs including removing the debris from site to outside MoD land all as specified.

M&L for 15 mm thick screed bed in cement mortar 1:4 on concrete surface including finished even and smooth without using extra cement and mixing water proofing compound as per manufacturer's insturctions complete all as directed. (Note :- Water proofing Compound shall be measured and paid seprately).

Supply only liquid water proofing compound

M&L for cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate ) as in coving, kerbs on roof, bed block etc complete all as specified.

M&L for APP based modified prefabricated five layer 3 mm thick and weighing not less than 3.6 Kg/Sqm water proofing membrane reinforced with polyester non woven fabric mat with 150 gm/Sqm black finished and laid over industrial bitumen 85/25 grade @ 1.2 Kg/Sqm over compatible bitumen primer conforming to IS 3488 @ 0.30 Ltr/ Sqm laid by torch application method, 75mm side overlap and 100 mm longtitudinally overlap. At the junction of roof and parapet wall, a groove of 75mm wide and 65mm deep horizontal shall be made and filled with 1:3 (bituminious mastic) including sealing of joints/overlap with hot bitumen grade 85/25 complete all as specified. (Note : (a) The rate of necessary scaffolding wherever required shall be deemed to be included in the quoted rate of item. (b) Each step must be approved by GE before proceeding to next step. (c) Ponding test shall be carried out by contractor. (d) The contractor shall submit purchase vouchers alongwith test certificate before payment.

M&L for factory made cement concrete tiles 25 cm x 25 cm x 20 mm thick, machine pressed, set and pointed in neat cement slurry in floor with grey cement and no pigment over and including 15 mm thick screed bed in CM 1:4 complete all as specified.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc removing debries from sites to out of MoD land upto four storey building.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 including finishing surface even and smooth without using extra cement all as specified.

M&L for preparing newly plastered surface of wall and applying two coats of exterior emulsion paint 100% acrylic of approved colour over a coat of primer over 2mm thick (avg thickness) wall care putty complete all as specified including necessary scaffolding upto four storey building.

M&L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of wall primer over 2mm thick (avg thickness) wall care putty complete all as specified including necessary scaffolding upto four storey building.

M&L for complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of primer 2mm thick (avg thickness) wall care putty complete including preparation of surfaces of walls including necessary scaffolding upto four storey building all as specified.

M&L for preparation of old treated surfaces of wall and applying one coat of exterior emulsion paint (weather proof and dust proof ) complete all as specified.

S&F for 15mm bore galvanised steel water tubing, ‘medium grade’ with all ISI marked fittings and fixed on walls, ceiling or laid in floors complete all as specified.

S&F for 20mm bore galvanised steel water tubing, ‘medium grade’ with all ISI marked fittings and fixed on walls, ceiling or laid in floors complete all as specified.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area not exc. 1.5 Sqm each all as specified.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc. 1.5 Sqm but not exc 4 Sqm each all as specified.

S&F for 35mm thick second class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

M&L for mild steel framed work such as grills, gratings, chowkhat/ frame etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified.

S&F for 125mm long extruded anodised aluminum alloy handle fabricated type fixed with flat head SS screw.

S&F for 150mm long anodised aluminum barrel tower bolt of extruded aluminium section fixed with flat head SS screw.

S&F for aluminum alloy sliding door bolt 300mm long with hasp, staple (bolt type) adnd fixing clips of sheets, cast of exctruded sections and fiing bolts or extruded section and all as specified

M&L for preparation of newly or previously untreated surfaces of wood of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F in repair factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete with glazing bars dovetailed or welded complete all as specified.

M&L for 20-22mm thick machine cut kota stone slab flooring of size not less than 600mm x 600mm laid over 15mm thick screed bed in CM 1:6, set, jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polished complete all as specified.

M&L for granite (of any type) work (table rubbed and polished) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15mm thick screed bed in cement mortar 1:4 as in floor etc complete all as specified.

S&F for energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 200 Watt flood light with high power LEDs as light source, suitable for inlighting architectural facade highmast and general purpose lighting and connection with suitable size copper conductor wire complete all as specified.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium solid conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sqmm 2 core nominal cross section in service connections complete all as specified.

Material and labour for submain wiring with two single core 2.50 Sqmm PVC insulated FRLSH multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked not less than 20mm dia with all conduit fittings & fixing accessories and one single core 2.50 Sqmm FRLSH multistranded copper conductor cable as continuous earth wire complete all as specified.

Supply and fixing for sheet metal enclosure MCB SPN DB two way 240 Volt without busbar complete with connection testing and commissioning all as specified.

Supply and fixing for MCB SPN 6-32Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) complete with connection testing and commissioning all as specified.

M&L for rolled mild steel work in tubular trusses, purlins, rafter etc (square/ rectangular/ round hollow pipe) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I S : 1161-1979 grade St.-240 fixed with angle cleats or other connecting plates etc including all necessary welding, bending, drilling holes etc complete all as specified.

S & F for 0.50mm thick pre-painted galvalume aluminum zinc coating GI based Plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F for rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W ( Gde- E-250) quality-A complete all as specified.

S&F for ultra thin nylon netting for bird proofing, mesh size 25mmx25mm of adequate tensile strength fixed with hooks and exiting structural members of hanger in ceiling including PVC made bird landing arrester complete all as specified.

M & L for cuting holes in brick or stone walls built in cement mortar or cement lime mortar or for inserting holdfast and making good dismantalled portion in CM (1:3) or cement concrete (1:2:4) type B-1 as required complete all as specified.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement morter 1:6 complete all as specified.

M&L for rendering 10mm thick on fair faces of brick work or concrete surface of walls in cement mortar 1:6 including finishing surface even and smooth without using extra cement all as specified.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer using roller including necessary scaffolding etc complete.

M&L for 20mm thick granite (of jet black ) work (table rubbed and polished ) as in steps ,jambs ,pillars,window cills, cooking platform and like over 15mm thick screed bed in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including exposed edges to make half round complete all as specified.

M&L for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exc 0.18 Sqm as in flooring etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 all as specified.

M&L for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exc 0.18 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1: 4 as on vertical surfaces, skirting, dado etc all as spcified.

S&F for vitreous china wash hand basin flat back of size 550mm x 400mm first quality white including brass waste coupling 32mm size, PVC waste pipe 32mm bore of adequate length, one pair of mild steel bracket 35mm x 35mm x 6mm size including one 15mm bore chromium plated pillar tap, cast copper alloy,one CP stop valve 15mm bore and one PVC connection15mm size with PTMT nuts of length 450mm long complete all as specified.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick work complete all as specified.

S&F for 500 litres capacity rotational moulded polyethene water storage tank (cylindrical vertical with closed top) three layers, hoisted and fixed in position all as specified.

S&F for rolled mild steel in stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, ladders, walk way, railings and similar work etc complete including cutting, welding with proper overlapping & welding with angle iron bottom as conforming to Fe 410 -W (GdeE- 250) quality-A complete all as specified .

S&F for 1.00mm thick mild steel, plain, black sheet in wall cladding,steel gates,stairs,risers and threads and similar work, cut to size, holes punched,including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles,etc.as required all as specified.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil.

M&L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in foundation filling and mass concrete all as specified.

M&L for form work to side and soffits of shelves for rough finished surface of concrete all as specified.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) over 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

M&L for preparation of newly plastered surfaces of wall surface and applying two coats of exterior emulsion paint over a coat of primer complete all as specified.

S&F for collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets including cutting holes, making good surface in cement mortar 1:4 or cement concrete 1:2:4 type B-1 to match the existing surface complete all as specified.

RK TRADERS

ETERNITY PROJECT

HANUMAN BUILDERS

High Tech Metal India

a.k constructions

DEV CONSTRUCTION