Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder. | |
| 2 | L2₹2.8 L+₹26,222.50 (10.3%)Rejected-AOC | L2 | Rejected-AOC Not lowest bidder. |
Tender Value
₹2.3 L
EMD Value
₹4,500
Closing Date
14 Nov 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE NAGPUR
Commander Works Engineers Bldg No. P-9, Sitabuldi Fort, Nagpur-440 001 Pin-900419, C/o 56 APO
PROVISION OF RAIN WATER HARVESTING FOR 60 MEN SINGLE LIVING JCOS AND OR ACCN AT FORT AREA NAGPUR
2024_MES_671151_2
84839/E8
Open Tender
Civil Works
Item Rate
90 days
GE KAMPTEE
As per Tender Document
7 documents required · 7 mandatory
₹300
Yes
GE KAMPTEE
₹4,500
Yes
20 Dec 2024
16 Oct 2024
15 Nov 2024
16 Oct 2024
14 Nov 2024
23 Oct 2024
Amount
Excavation over areas exc 10 sqm on plan and not exc 1.5m depth and getting out in hard/dense soil complete all as specified and directed.
Excavation over areas exc 10 sqm on plan and exc 1.5m and not exc 3.0m depth and getting out in hard/dense soil complete all as specified and directed.
Excavation over areas exc 10 sqm on plan and exc 3.0m and not exc 4.5m depth and getting out in hard/dense soil complete all as specified and directed.
Material and labour for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
Material and labour for brick work with fly ash brick old size, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
Material and labour for providing reinforced cement concrete 1:1 1/2:3 (Nominal Mix), type A-1, using 20mm graded stone aggregate as in slabs supported on walls, beams, columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likes etc complete all as specified and directed.
Material and labour for mild steel TMT bars in reinforcement 10mm dia and over, cut to length, bent to shape as required including cranking, binding spirally, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Material and labour for formwork to flat soffits of suspended slabs such as roof slabs, floor slab, landing and similar work not exc 200mm thick (horizontal/sloping) complete all as specified and directed.
Material and labour for boring of 350mm dia bored cast in situ piles 16 mtrs in soil and getting out and disposal of soil to a distance 50mtr using DMC method (Direct Mud Calculation) complete all as specified and directed.
Material and labour for sand filling under floor or in foundations including watering and consolidation complete all as specified and directed.
Material and labour for 100mm thick gravel filling under floor or in foundations including watering and consolidation complete all as specified and directed.
Material and labour for loose filling with broken stone/ boulders of guage 40 to 80mm and deposited, spread and levelled in layers, watered and rammed to a true surface complete all as specified and directed.
Material and labour for hand packing (any thickness) at back of walls over arches etc and raising (or lowering) to the required level with broken bricks complete all as specified and directed.
Supply and fix 200mm dia bore PVC casing pipe complete all as specified and directed.
Material and labour for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed.
Material and labour for mild steel, plain black sheet 1mm thick in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required complete all as specified and directed.
Material and labour for moorum fillings in floors or pavings, laid in layers not exc 15cm thick spread, levelled and rammed including watering complete all as specified and directed.
Material and labour for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed.
Removing of excavated materials (hard/dense soil) not exc 50m and deposited where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
M/s Rahul Traders (BID ID -3165343)
Bidder Name
M/s Rahul Traders
Devika Constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .