Madurai District Alanganallur TP IYOTHEE THASS PANDITHAR DEVELOPMENT SCHEME 2024-2025 Anganwadi

Amount

Earthwork excavation for foundation in all soils and to the full depth as may be directed except hard rock not requiring blasting inclusive of shoring, shuttering and baling of water wherever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and compacted depositing the surplus earth in places shown by the Departmental Officers with initial lead of 10 Meters and lift of 2 Meters and lift of 2 Meters and clearing leveling the site etc. complete.

Plain Cement concrete Using 1:4:8 mix (one part cement, Four part sand Eight part aggregates) using 40mm ISS gauge HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying, consolidating and curing etc., complete as per standard specification. TNDSS NO: 28 V, VI (S2) V, VI (S5A) VII

Providing and laying well Gravel thick including cost and conveyance of Gravel from approved quarry to working site and stacking them to departmental gauge for pre measurement including labourcharges for sperading watering including all leads for water and consolidation by power roller rolling including hire and fuel charges for all tools and plants employed and all other incidental charges etc, complete complying as per clause 301&305 of MORTH specification.

Brick work in Cement mortar 1:5 mix using country bricks of size 8.3/4" X 41/4" X 2" including all cost and convayance of all Materials to site and all labour charges for mixing mortor curring etc complete.

Up to Basement

Super Structure

Reinforced Cement Concrete 1:1 1/2:3 mix (One cement one and half sand and three aggregate) using 20mm size ISS gauge HBG metal for foundation including cost and conveyance of all materials to site and all labour charges for mixing, laying, ramming, curing concrete etc., complete as per standard specification.

Up to Plinth

Above Plinth Leavel

Supplying and Fabrication of Steel TMT Rad for all RCC Works including cost fo Steel binding wire and labour charges and Fabrication and placing in position etc., complete as per Standard Specification

Centering for sides and soffits and RCC slabs and beams, lintels and other flat surfaces below 3M height including strutting and strutting arrangements as per Standard Specification and removing the same after the specified period and including cost and conveyance of all other incidental charges etc., complete as per Standard Specification

Squre Column

Plain Surface

Ceiling Plastering with Cement Mortar 1;3 (One Cement three sand) mix, 10mm thick and including cost and conveyance of all materials to site and all labour charges etc., complete as per Standard Specification

Plastering with Cement Mortar 1;5(One Cement five sand) mix, 12v mm thick and including cost and conveyance of all materials to site and all labour charges etc., complete as per Standard Specification

Weathering Proof course over roof top and including cost and conveyance and all labour

Finishing with one course of machine pressed tiles of size 20cm x 20 cm x 2 cm with cement mortor 1:3mix with crued oil water proofing compound with same mortor pointing including cost and conveyance of all materials and all labour Charges

Fabrication and supply of mild steel door and windoor including cost and conveyance and all labour charges for Completed etc.

Supplying and fixing of 5cm thick RCC precast jolly including cost and conveyance of all materials and all labour charges etc complete

Wiring with 2x2.5sqmm AC Aluminum unsheathed cable with PVC rigid pipe on wall and ceiling including all cost and conveyance of all materials to site and all labour charges for light point(SD26)

Wiring with 2x2.5sqmm AC Aluminum unsheathed cable with PVC rigid pipe on wall and ceiling including all cost and conveyance of all materials to site and all labour charges for Fan point(SD26)

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Dadoing walls with best approved quality white/colour glazed tiles fo following sizes set in C.M 1:2mix, 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40kg./sq.m. neatly in all floors, curing, etc., complete with standard specification.

Supplying and fixing in position Water Closet(Oriya type) of size 580 x 440mm White glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the coset using 40mm broken brick jelly concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection etc., complete.

Painting two coats of new iron work with first quality of synthetic enamal paint over one coar of primer etc., complete.

VADIVEL K A (BID ID -1120982)