PROVN OF CERTAIN OTM ACCN USING 3D CONCRETE PANELS IN DOMESTIC AREA AT AF STN ADAMPUR

Amount

SCHEDULE 'A' SECTION-I (BUILDING/STRUCTURE WORKS)

Lump sum price worked out by the tenderer for “Building Work / Structure Work” as listed in Schedule ‘A’ Section - I.

SCHEDULE 'A' SECTION-II (PART-I) (INTERNAL ELECTRIFICATION WORKS)

Lump sum price worked out by the tenderer for “INTERNAL ELECTRIFICATION WORK” as listed in Schedule ‘A’ Section - II (Part-I)

SCHEDULE 'A' SECTION-II (PART-II) (INTERNAL ELECTRIFICATION WORKS)

Point wiring with multi-stranded copper conductor, single core, FRLSH PVC insulated and unsheathed cable, including FRLSH PVC insulated unsheathed stranded copper conductor single core cable as earth continuity conductor to common earth and connected to earth dolly, with and including GI terminal boxes with modular frame & base plate for fixing modular switches/ sockets comprising the following: -

One light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. or for bell/buzzer with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified.

One Socket outlet three pin, 6 Amp, on the same board, with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, all as specified.

One Socket outlet three pin, 6 Amp, independent, with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC heavy duty concealed conduit all as specified.

One socket outlet three pin, 6/16 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified.

NOTES:- (a) Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule 'A'. (b) GI boxes shall be fixed flush to walls in position with cement mortar (1:4) complete all as directed.

Switch modular type single pole one way, 6 Amp, complete all as specified.

Bell push switch modular type single pole one way, 6 Amp, complete all as specified.

Switch modular type single pole one way, 16 Amp,complete all as specified.

Socket outlet modular type multipurpose having provision for 2&3 pin, 6 Amp, complete all as specified.

Socket outlet modular type multipurpose having provision for two-in-one 3 pin 6 Amp & 3 pin 16 Amp, complete all as specified.

Fan regulator modular type (electronic) suitable for 48”/56” sweep fan, step type, two module, complete all as specified.

Sub main wiring (with approved colour coding as per IS) with single core FRLS PVC insulated flexible stranded copper conductor 1.1 KV grade (main cable: number of runs as indicated below along with single core FRLS PVC insulated flexible stranded copper conductor 1.1 KV grade for earthing in conduits, complete all as specified for 2 runs of 4 Sq. mm main cable + 1 run of 4 Sq. mm earth cable.

Sub main wiring (with approved colour coding as per IS) with single core FRLS PVC insulated flexible stranded copper conductor 1.1 KV grade (main cable: number of runs as indicated below along with single core FRLS PVC insulated flexible stranded copper conductor 1.1 KV grade for earthing in conduits, complete all as specified for 2 runs of 6 Sq. mm main cable + 1 run of 6 Sq. mm earth cable.

NOTES FOR SERIAL ITEM 17 & 18: (i) Conduit & conduit accessories shall be measured & paid for separately. (ii) For payment purposes, total runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as "1 RUNNING METRE"

Rigid non metallic, PVC concealed conduit, 20 mm bore, medium grade, ISI marked, inclusive of all fitings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing acessories such as couplers, lock nuts, saddles, pipe hook etc. for sub main wiring and the like complete all as specified.

MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 kA, 'C' curve type of rating 6 to 32 Amp complete all as specified.

MCB suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 kA, 'C' curve type of rating 40 to 63 Amp complete all as specified.

MCCB suitable for 415 volts AC supply, 4 pole with over load and short circuit protection and rupturing capacity not less than 16 kA, of rating 63 Amp, complete all as specified.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 240 volt, breaking capacity not less than 10 kA, complete all as specified.

Surface mounted environment friendly decorative ultra slim round profile LED 10 W lighting fixture with extruded polycarbonate, 6500K, lumen output should not be less than 90 lumens per watt complete. MAKE: Havells Cat No. ENDURALINEARNEOBS10WLED865 SPCWH or equivalent in makes mentioned in Appendix 'B' here-in-after.

Surface mounted LED down light 12 W with aluminum (99% purity) sink, available in roun shape PC diffuser in white powder coated finish with built in electronic low THD (<10%) LED driver complete. MAKE: Havells Cat No.INTEGRANXTRDDLRSURD12WLED857S or equivalent in makes mentioned in Appendix 'B' here-in-after.

Surface mounted environment friendly with eye soft technology & glarefree diffuser LED 20 W lighting, 6500K, lumen output should not be less than 90 lumens per watt complete. MAKE: Havells Cat No. ENDURALINEARNEOBS20WLED865SPCSS or equivalent in makes mentioned in Appendix 'B' here-in-after.

Exhaust fan 250 mm sweep with blades, frame and louvers, AC single phase, 230 V, plastic body, fixed in location and connecting up from ceiling rose or connector to fan, complete all as specified. MAKE: Havells Cat No. FHVVEDZBLK06 or equivalent in makes mentioned in Appendix 'B' here-in-after.

Exhaust fan 300 mm sweep with blades, frame and louvers, AC single phase, 230 V, steel body, heavy duty & industrial type, fixed to wall with 10 mm dia fasteners, nuts & bolts and connecting up from ceiling rose or connector to fan, complete all as specified. MAKE: Havells Cat No. FHEHDSPDB120 or equivalent in makes mentioned in Appendix 'B' here-in-after.

Supply, installation, testing and commissioning, BEE approved, 5 star rated, water heater storage type electric driven single phase 240 volts AC 50 Hz of capacity 25 ltrs complete with vent pipe, flusible plug safety valve, NRV etc., including necessary nut, bolts, inlet and outlet connection pipeof suitable length with anchor bolt of steel brass quoted, not less than 12mm x100mm for cold water inlet and nesessary electrical connection, fixing where directed withcomplete fitting and accessories complete all as specified.

Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI wire 4 mm dia (upto the cross arms) by means of GI bolts/nuts/washers, protected by 15 mm bore GI light grade pipe. Earth plate shall be surrounded by alternate layer of charcoal or coke and common salt 15 cm thick all around bottom and top. 20 mm bore GI light grade pipe for watering and including funnel, wire mesh, RCC cover & frame, PCC (1:3:6) type C-2 (using 20 mm graded crushed stone aggregate) as in earthing pit including necessary excavation & earth work, all as specified & shown in electrical plate No. 3 of MES Schedule Part – I. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) The unit rate includes earthing lead & protection pipe upto 7.5 metre from top of earth plate.

Electronic energy meter, temper proof, LCD display with polycarbonate cover 230 V, 10-60 Amp, accuracy class-I 50 Hz, conforming to IS:13779, IP-54, with parametres to show data, time, current reading, load, PF, voltage and kWH complete all as specified .

SUBTOTAL

SCHEDULE 'A' SECTION-III, (PART-I) INTERNAL WATER SUPPLY WORKS

Lump sum price worked out by the tenderer for “INTERNAL WATER SUPPLY WORKS” as listed in Schedule ‘A’ Section - III (Part-I)

SCHEDULE 'A' SECTION-III, (PART-II) INTERNAL WATER SUPPLY WORKS

Angular stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, complete. MAKE: PRAYAG Cat No. 6510 or equivalent make mentioned in Appendix 'B'.

Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, complete. MAKE: PRAYAG Cat No. 6508 or equivalent make mentioned in Appendix 'B'.

Wall mixer telephonic with crutch with provn for hand shower, cast copper alloy, chromium plated fancy type, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, complete. MAKE: PRAYAG Cat No. 6570 or equivalent make mentioned in Appendix 'B

Overhead ABS radio shower with cast copper alloy chromium plated arm 225 mm long with flange and fixed in position, complete. MAKE: PRAYAG Cat No. BOS-103 or equivalent make mentioned in Appendix 'B'.

SUBTOTAL

SCHEDULE 'A' SECTION- IV (SEWAGE DISPOSAL WORKS)

Lump sum price worked out by the tenderer for “SEWAGE DISPOSAL WORKS” as listed in Schedule ‘A’ Section -IV

SCHEDULE 'A' SECTION - V (INTERLOCKING PAVER BLOCK WORKS)

Lump sum price worked out by the tenderer for “INTERLOCKING PAVER BLOCK WORKS” as listed in Schedule ‘A’ Section -V

SCHEDULE 'A' SECTION - VI, (PART-I ) (EXTERNAL WATER SUPPLY WORKS)

Lump sum price worked out by the tenderer for “EXTERNAL WATER SUPPLY WORKS” as listed in Schedule ‘A’ Section -VI

SCHEDULE 'A' SECTION - VI, (PART-II ) (EXTERNAL WATER SUPPLY WORKS)

Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for 25 mm bore GI tubes, ISI marked, screwed both ends for iron pipe, complete all as specified.

Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for 40 mm bore GI tubes, ISI marked, screwed both ends for iron pipe, complete all as specified.

Construction of valve pit size 1000 mm X 1000 mm X 1000 mm of brick masonry construction including cover of MS sheet 3.15 mm thick and angle iron 40mm x40mmx 6mm with hinges, handle and locking arrangement including painting with two coat of synthetic enamelled paint over a coat of red oxide and grouting to PCC 1:2:4 plastering in cement mortar 1:3, foundation concrete 1:3:6 including necessary earthwork complete all as specified and shown on drawings.

Cutting of existing CI pipe line 150 mm bore for taking branch connection inserting flanged type DI Tee 150 x 150 x 80 mm alongwith two tail piece one end flanged and other end socketed complete all as specified . NOTE :- The rate of flanged type DI TEE alongwith two DI Tail pieces one end flanged and other end socketed is included in this item and nothing extra shall be paid on this account.

Subtotal

SCHEDULE 'A' SECTION - VII (EXTERNAL ELECTRIFICATION WORKS)

LED street light fitting, 35 watt 230 V, AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, LED lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including electric connection complete all as specified. MAKE: Havells Cat No. ENDURASUNDOWNSL35WLED765PASY BOPC or equivalent in makes mentioned in Appendix 'B' here-in-after.

Street light bracket made out of 25 mm dia GI tubing medium grade made to shape 1.5 Mtr long with fixing arrangement duly painted with synthetic aluminium paint over a coat of primer including MS clamps and back plates fabricated from steel section including nuts, bolts, washer etc complete all as specified.

Boring holes under roads, pavements, hardstanding by treanchless tecnology using ultra sounding technique suitable for and including 150 mm bore HDPE suitable for 0.4 mpa working pressure pipe complete all as specified.

Clean dry sand ( locally available) as cushioning for under ground cable 230 mm thick (one layer of 80 mm thickness before laying the cable and other layer of 150 mm thickness after laying the cable) complete all as specified. NOTE:- Punned down thickness (over all 180 mm) shall be considered for measurement and payment.

Bricks as specified in PS clause 5.1, laid flat and dry in trenches over the cable for protection as length perpendicular to the direction of cable adjacent to each other complete, all as specified.

GI tubing light grade 40 mm bore, ISI marked, fixed to wall, poles or laid in trenches for cable protection including fittings complete all as specified.

Supply, laying, jointing & testing of LT XLPE insulated cable screened, bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with aluminium conductor conforming to IS-7098 (Part-I -1988) laid in trenches/ ducts/ through pipes/ in floors / under roads/ hard standing /along poles and testing complete all as specified of sectional area 25 Sq. mm, 2 core.

Supply, laying, jointing & testing of LT XLPE insulated cable screened, bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with aluminium conductor conforming to IS-7098 (Part-I -1988) laid in trenches/ ducts/ through pipes/ in floors / under roads/ hard standing /along poles and testing complete all as specified of sectional area 25 Sq. mm, 4 core.

NOTE for item 61 to 62:- Excavation and earth work, sand cushioning concrete protection cover & GI pipe shall be measured and paid for separately under respective item.

SCHEDULE 'A' SECTION - VIII (SITE CLEARANCE & EARTH WORKS)

Lump sum price worked out by the tenderer for “SITE CLEARANCE & EARTH WORKS” as listed in Schedule ‘A’ Section -VIII

AAR KAY BEE ENTERPRISES

M/s Sahib and Company