Construction of Proposed Additional Four (04) Class Room Building With Toilet, Kitchen Etc. for Madarsha Saminul Olum Sahpur, Ganon, Ghanshyampur at Dist.- Darbhanga.

Earth work in excavation over areas (exceeding 30 cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m; disposal earth to be levelled and neatly dressed.

Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C.

Cement mortar 1:6 (1 cement: 6 coarse sand )

Cement mortar 1:4 (1 cement: 4 coarse sand )

Extra tor Brick work in superstructure above plinth level upto floor V cum

Brick work with bricks of class designation 100A in foundations and plinth in :

Cement mortar 1:6 (1 cement: 6 coarse sand )

Half brick masonry with bricks of class designation 100A

Cement mortar 1 : 4 (1 cement: 4 coarse sand )

12 mm cement plaser (1:3) with a floating coat of neat cement

6 mm cement plaster with cm (1 : 4)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.

IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.

IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area.

IVth course of 400 micron thick PVC sheet (overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm

Forming groove of uniform size from 12x12 mm and upto 25x15 mm in plastered surface as per approved pattern

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes type A including jointing with seal ring 110 mm dia pipe

PVC clips of 110 mm

Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panes with glazing clips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required.

Extra for providing and fixing steel beading of approved shape and section with screws instread of glaxing clips and met. Sash putty in steel doors, windows, Ventilators and comosite units.

Steel windows

Steel ventilators

steel work welded in built up section work in ladders/stair

Applying priming coat with readymix primer on steel work….

Applying painting with readymix paint on steel work….

per 50 kg

Providing 250 mm wide brick drain in cement mortar (1:6)

Circular shape 560 mm internal diameter

Providing well burnt brick bats or Jhama bricks including ramming properly till compacted thickness is achieved, curing and carriage of water with all leads, making proper slope and blinding the top with cement mortar (1:10) all complete as per building specification and direction of E/I.

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :

Local Sand

Coarse Sand (175 km From Koilwer)

Stone chips (236 km from Manpur Gaya)

Bricks

Cement

Bricks

Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:

Providing and fixing 600 x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete.

Metre

Metre

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs, screwed with M.S screws of required length including cutting brick work and fixing in cement mortar 1:4( 1 cement: 4 coarse sand) and making good the wall etc. complete.

Providing and laying flanged C.I. standard specials such as tees,bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 :

quintal

Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end).

Providing and fixing gun metal non-return valve of approved quality (screwed end).

Providing and fixing PTMT grating of approved quality and colour.

Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1(1 cement: 1 fine sand) including testing of joints etc. complete.

Metre

Metre

Providing and fixing square-mouth S.W gully trap grade 'A' complete with C.I grating brick masonry chamber with water tight C.I cover with frame of 300x300mm size(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

Providing and laying non-pressure NP2 class (light duty) R.CC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2( 1 cement: 2 fine sand) including testing of joints etc. complete.

Metre

Providing and fixing soil, waste and vent pipes

metre

S/F/F 2 H.P. Cromption or any other apprioved make Motor and ISI make automatic starter mounted on a common wooden board etc. all complete job.

Class room Desk Class room desk:- 2 Seater with pedestal storage unit (For class room) & siting desk (Size 1050x450x 750 (H) Supply Febrication & Installation of class room table top 19 mm thick prilemanatied board with 2 mm PVC edge banding, supported on MS square Hollow section (Size 40mm x 40mm ) frame complete with wire manager at table top all fiting & assecories as per drawing,.. The product should be BIFMA, darbhanga ISO-19001,14001, OHSAS18001 , lGBC, FIRA Certified. as per the approved photograph and as per the direction of Engineer -in -Charge.

TABLE:- For CLASS ROOM Providing and placing in position table of indo/ Haworth/dolphin. Providing and placing in position table of indolHaworth/Dolphin: Table size 1200 mm (W) x 600 mm (D)x 750 mm (Ht) 25 mm thick table top made up of prelam partical board with 2 mm thick pvc edge Dending tape, understructure of table shall have gable end made up 18 mm thick prelam partical board. Wooden modesty in front mafe up of 18 mm thick per lamjnated partle board. Matel flipper witout switch socket with matle cable tray duly powder coated & matel wire riser for carrying wires. The Product should be from BIFMA Compliance and FSC Certified Company etc. Complete as per the approved photograph and as per the

High Back Chairs size (Back Height-670x back width-460)mm & (seat Depth 485x seat width-475)mm with Min-Max height (460-540)mm. Nylon base chair with push back mechanism & fix handle. Nylon base chair with push mechanisnm. Back & seat cover cushion chair uphlostered in fabric & adjustable armrest locks any position. Syncro mechenism with locking system and five star chrome base with nylon casters. seat & back made up of 360b degree in either direction for ease of motion. Standard on every executive with task chair & controis rate and ease with which chair reclines to different weight and strengths of users. Back reclines at A2- to-1 ratio to be seat. 5% post consumed recycled content & 30% total recycled content. Color-black. The product should be BIFMA, Green GUARD, AGSI Certified, ISO 14001, ISO 50001: 2011 Certified, colour- blue / black.

Medium Back Visitor Chiars:- Providing and placing in position visitor chair of seat & back made up of hi-quality leatherite made up of 1.2+/0.1 cm thick hot press plywood measured. Chair upholstered with leatherite and moulded foam. The foam is designed with contoured lumber support for extra comfort. The seat and back up of 20 mm dia pipe of MS chrome of 16 Sanghralay guage duly epoxy powdwer coated / chrome plated (40-45 microns) etc. The Product should be from BIFMA Compliance and FSC Certified Company etc. Complete as per the approved photograph and as per the direction of Engineer - in -Charge.

Point

Point

Meter

Meter

Meter

Meter

Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed PVC conduit as required.

Meter

Meter

Meter

Telephone socket outlet

Rotary Handle

25/100 amps. 4 pole MCCB, 10 KA(32 Amp-6Nos & 40/50 Amp-6 No)

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

300 mm width X 50 mm depth X 1.6 mm thickness

Meter

Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having single prong on top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Metre

Metre

Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run)

Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required.

Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required.

50 sq. mm, 3.5 core

Meter

Supply and erection of 6 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm,made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm , small door opening for junction box mounting with MCB & connector, cement concrete of 1:3:6 including excavation, refilling and suitable size foundation bolts with template and all complete job as required. (but without pole collar)

CCTV Network Camera Bullet 4 MP Image Sensor - 1/3" Progressive Scan CMOS, Shutter Speed - 1/3s to 1/10,000 s, Lens - 2.7mm, 4mm, 6mm @ F2.0angle of view: 106°(2.7mm), 83°(4mm), 55.4°(6mm), Day &Night - IR cut filter with auto switch, White Balance - Automatic/Manual, Video Compression - 4/MJPEG/H.264+, Max. Resolution - 2688×1520, Communication Interface - 1 RJ45 10M/100M Ethernet port, Base T

CCTV Network Camera Dome 4 MP Image Sensor - 1/3" Progressive Scan CMOS, Shutter Speed - 1/3s to 1/10,000 s, Lens - 2.7mm, 4mm, 6mm @ F2.0angle of view: 106°(2.7mm), 83°(4mm), 55.4°(6mm), Day &Night - IR cut filter with auto switch, White Balance - Automatic/Manual, Video Compression - H.264/MJPEG/H.264+, Max. Resolution - 2688×1520, Communication Interface - 1 RJ45 10M/100M Ethernet port, Base T

Supply / Installation and Commissioning of 24 Port Network Switch GIGA PoE,IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant,24x10/100/1000 Mbps Auto-MDIX PoE ports,Provides up to 30 watts per PoE port,PoE power budget 370W,4 KV surge protection for PoE ports,IEEE 802.3x flow control support,Plug-and-play installation,8.8 Gbps switching fabric,2.75 Mbits RAM Data Buffer,4K MAC address entries,Sturdy metal enclosure

Cat 6 Cable

Hard disk 6 TB

Supply fitting fixing Rack 19" 12U fully powder coated complete etc as required with complete accessories (5 amp x 6 socket, wire manager, rack fan) VALRACK/ Netrack make. Wit all necessary items.

32" Full HD LED Display

Supplying, installation, testing & commissioning of addressable fire control module complete as required.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required

Multi Cooperative Sensing Type Analog addressable Photoelectric smoke detector with mounting based LED, Address Switch from 01-159 , complete as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supply, Installation, Testing and Commissioning of on grid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mountedon Aluminium/GI structure of suitable strength with following components complete as required:-a)Solar Photovoltaic Module of capacity 330Wp or above, manufactured in India, conforming to IS14286/ IEC61215, IS/IEC61730-Part-1, IS/ IEC61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than16.5%. PV modules used in solar power plants/systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% attheend of 25 years. b)Power Conditioning Unit (PCU) of 350-800V DC Input voltage range and 400V AC, three phase, 4 wire, 50Hz+/-2.5Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than3% and suitable for ambient temperature from 0 to 50 degreeC. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d)Fixing of Array junction box & Main junction box with IP65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required. (Make-Heron India Pvt ltd / Ojas Solar Energy/ Solar Power Tech) Note:-All Electricals & Mechanical items included.

PIPING & VALVES

Meter

Meter

Meter

Meter

ABC Powder Type (Stored Pressure) Fire Extinguisher, 4Kg. Capacity, ISI Mark (IS:15683), squeeze grip valve, operating temperature (+5)° C to (+55)° C for Class 3A type of Fire filled with MAP ABC Powder, Complete in all respect.

CO2 Type Fire Extinguisher, 4.5 Kg Capacity, ISI Mark (IS:15683), squeeze grip valve, operating temperature (-30)° to (55)° C for Class 13B type of Fire fitted with 1 Mt. Hose & PVC Horn, Complete in all respect.

Providing and fixing of self illuminated / auto glow "EXIT" signs printed on photoluminescent sheet containing self illuminated base chemical, of appropriate size not less than 400 x 150 mm, suspended from ceiling or fixed to the walls with accessories as required and as directed at site.

Providing & Fixing of Vermi Proof Motor Control Panel fabricated from 14 SWG MS Sheet with stove enamelled paint and comprising for Terrace Pump.

Construction of Additional Four (04) Class Room Building With Toilet, Kitchen Etc. for Madarsha Saminul Olum Sahpur, Ganon, Ghanshyampur at Dist.- Darbhanga Under Madarsha Strengtheing Scheme

Name of Item

Rs (in Lakh)

Rs (in Lakh)

Earth work in excavation over areas (exceeding 30 cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m; disposal earth to be levelled and neatly dressed.

Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C.

Cement mortar 1:6 (1 cement: 6 coarse sand )

Cement mortar 1:4 (1 cement: 4 coarse sand )

Extra tor Brick work in superstructure above plinth level upto floor V cum

Brick work with bricks of class designation 100A in foundations and plinth in :

Cement mortar 1:6 (1 cement: 6 coarse sand )

Half brick masonry with bricks of class designation 100A

Cement mortar 1 : 4 (1 cement: 4 coarse sand )

12 mm cement plaser (1:3) with a floating coat of neat cement

6 mm cement plaster with cm (1 : 4)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.

IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.

IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area.

IVth course of 400 micron thick PVC sheet (overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm

Forming groove of uniform size from 12x12 mm and upto 25x15 mm in plastered surface as per approved pattern

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes type A including jointing with seal ring 110 mm dia pipe

PVC clips of 110 mm

Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panes with glazing clips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required.

Extra for providing and fixing steel beading of approved shape and section with screws instread of glaxing clips and met. Sash putty in steel doors, windows, Ventilators and comosite units.

Steel windows

Steel ventilators

steel work welded in built up section work in ladders/stair

Applying priming coat with readymix primer on steel work….

Applying painting with readymix paint on steel work….

per 50 kg

Providing 250 mm wide brick drain in cement mortar (1:6)

Circular shape 560 mm internal diameter

Providing well burnt brick bats or Jhama bricks including ramming properly till compacted thickness is achieved, curing and carriage of water with all leads, making proper slope and blinding the top with cement mortar (1:10) all complete as per building specification and direction of E/I.

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :

Local Sand

Coarse Sand (175 km From Koilwer)

Stone chips (236 km from Manpur Gaya)

Bricks

Cement

Bricks

Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:

Providing and fixing 600 x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete.

Metre

Metre

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs, screwed with M.S screws of required length including cutting brick work and fixing in cement mortar 1:4( 1 cement: 4 coarse sand) and making good the wall etc. complete.

Providing and laying flanged C.I. standard specials such as tees,bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 :

quintal

Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end).

Providing and fixing gun metal non-return valve of approved quality (screwed end).

Providing and fixing PTMT grating of approved quality and colour.

Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1(1 cement: 1 fine sand) including testing of joints etc. complete.

Metre

Metre

Providing and fixing square-mouth S.W gully trap grade 'A' complete with C.I grating brick masonry chamber with water tight C.I cover with frame of 300x300mm size(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

Providing and laying non-pressure NP2 class (light duty) R.CC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2( 1 cement: 2 fine sand) including testing of joints etc. complete.

Metre

Providing and fixing soil, waste and vent pipes

metre

S/F/F 2 H.P. Cromption or any other apprioved make Motor and ISI make automatic starter mounted on a common wooden board etc. all complete job.

Class room Desk Class room desk:- 2 Seater with pedestal storage unit (For class room) & siting desk (Size 1050x450x 750 (H) Supply Febrication & Installation of class room table top 19 mm thick prilemanatied board with 2 mm PVC edge banding, supported on MS square Hollow section (Size 40mm x 40mm ) frame complete with wire manager at table top all fiting & assecories as per drawing,.. The product should be BIFMA, darbhanga ISO-19001,14001, OHSAS18001 , lGBC, FIRA Certified. as per the approved photograph and as per the direction of Engineer -in -Charge.

TABLE:- For CLASS ROOM Providing and placing in position table of indo/ Haworth/dolphin. Providing and placing in position table of indolHaworth/Dolphin: Table size 1200 mm (W) x 600 mm (D)x 750 mm (Ht) 25 mm thick table top made up of prelam partical board with 2 mm thick pvc edge Dending tape, understructure of table shall have gable end made up 18 mm thick prelam partical board. Wooden modesty in front mafe up of 18 mm thick per lamjnated partle board. Matel flipper witout switch socket with matle cable tray duly powder coated & matel wire riser for carrying wires. The Product should be from BIFMA Compliance and FSC Certified Company etc. Complete as per the approved photograph and as per the

High Back Chairs size (Back Height-670x back width-460)mm & (seat Depth 485x seat width-475)mm with Min-Max height (460-540)mm. Nylon base chair with push back mechanism & fix handle. Nylon base chair with push mechanisnm. Back & seat cover cushion chair uphlostered in fabric & adjustable armrest locks any position. Syncro mechenism with locking system and five star chrome base with nylon casters. seat & back made up of 360b degree in either direction for ease of motion. Standard on every executive with task chair & controis rate and ease with which chair reclines to different weight and strengths of users. Back reclines at A2- to-1 ratio to be seat. 5% post consumed recycled content & 30% total recycled content. Color-black. The product should be BIFMA, Green GUARD, AGSI Certified, ISO 14001, ISO 50001: 2011 Certified, colour- blue / black.

Medium Back Visitor Chiars:- Providing and placing in position visitor chair of seat & back made up of hi-quality leatherite made up of 1.2+/0.1 cm thick hot press plywood measured. Chair upholstered with leatherite and moulded foam. The foam is designed with contoured lumber support for extra comfort. The seat and back up of 20 mm dia pipe of MS chrome of 16 Sanghralay guage duly epoxy powdwer coated / chrome plated (40-45 microns) etc. The Product should be from BIFMA Compliance and FSC Certified Company etc. Complete as per the approved photograph and as per the direction of Engineer - in -Charge.

Point

Point

Meter

Meter

Meter

Meter

Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed PVC conduit as required.

Meter

Meter

Meter

Telephone socket outlet

Rotary Handle

25/100 amps. 4 pole MCCB, 10 KA(32 Amp-6Nos & 40/50 Amp-6 No)

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

300 mm width X 50 mm depth X 1.6 mm thickness

Meter

Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having single prong on top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Metre

Metre

Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run)

Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required.

Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required.

50 sq. mm, 3.5 core

Meter

Supply and erection of 6 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm,made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm , small door opening for junction box mounting with MCB & connector, cement concrete of 1:3:6 including excavation, refilling and suitable size foundation bolts with template and all complete job as required. (but without pole collar)

CCTV Network Camera Bullet 4 MP Image Sensor - 1/3" Progressive Scan CMOS, Shutter Speed - 1/3s to 1/10,000 s, Lens - 2.7mm, 4mm, 6mm @ F2.0angle of view: 106°(2.7mm), 83°(4mm), 55.4°(6mm), Day &Night - IR cut filter with auto switch, White Balance - Automatic/Manual, Video Compression - 4/MJPEG/H.264+, Max. Resolution - 2688×1520, Communication Interface - 1 RJ45 10M/100M Ethernet port, Base T

CCTV Network Camera Dome 4 MP Image Sensor - 1/3" Progressive Scan CMOS, Shutter Speed - 1/3s to 1/10,000 s, Lens - 2.7mm, 4mm, 6mm @ F2.0angle of view: 106°(2.7mm), 83°(4mm), 55.4°(6mm), Day &Night - IR cut filter with auto switch, White Balance - Automatic/Manual, Video Compression - H.264/MJPEG/H.264+, Max. Resolution - 2688×1520, Communication Interface - 1 RJ45 10M/100M Ethernet port, Base T

Supply / Installation and Commissioning of 24 Port Network Switch GIGA PoE,IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant,24x10/100/1000 Mbps Auto-MDIX PoE ports,Provides up to 30 watts per PoE port,PoE power budget 370W,4 KV surge protection for PoE ports,IEEE 802.3x flow control support,Plug-and-play installation,8.8 Gbps switching fabric,2.75 Mbits RAM Data Buffer,4K MAC address entries,Sturdy metal enclosure

Cat 6 Cable

Hard disk 6 TB

Supply fitting fixing Rack 19" 12U fully powder coated complete etc as required with complete accessories (5 amp x 6 socket, wire manager, rack fan) VALRACK/ Netrack make. Wit all necessary items.

32" Full HD LED Display

Supplying, installation, testing & commissioning of addressable fire control module complete as required.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required

Multi Cooperative Sensing Type Analog addressable Photoelectric smoke detector with mounting based LED, Address Switch from 01-159 , complete as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supply, Installation, Testing and Commissioning of on grid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mountedon Aluminium/GI structure of suitable strength with following components complete as required:-a)Solar Photovoltaic Module of capacity 330Wp or above, manufactured in India, conforming to IS14286/ IEC61215, IS/IEC61730-Part-1, IS/ IEC61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than16.5%. PV modules used in solar power plants/systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% attheend of 25 years. b)Power Conditioning Unit (PCU) of 350-800V DC Input voltage range and 400V AC, three phase, 4 wire, 50Hz+/-2.5Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than3% and suitable for ambient temperature from 0 to 50 degreeC. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d)Fixing of Array junction box & Main junction box with IP65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required. (Make-Heron India Pvt ltd / Ojas Solar Energy/ Solar Power Tech) Note:-All Electricals & Mechanical items included.

PIPING & VALVES

Meter

Meter

Meter

Meter

ABC Powder Type (Stored Pressure) Fire Extinguisher, 4Kg. Capacity, ISI Mark (IS:15683), squeeze grip valve, operating temperature (+5)° C to (+55)° C for Class 3A type of Fire filled with MAP ABC Powder, Complete in all respect.

CO2 Type Fire Extinguisher, 4.5 Kg Capacity, ISI Mark (IS:15683), squeeze grip valve, operating temperature (-30)° to (55)° C for Class 13B type of Fire fitted with 1 Mt. Hose & PVC Horn, Complete in all respect.

Providing and fixing of self illuminated / auto glow "EXIT" signs printed on photoluminescent sheet containing self illuminated base chemical, of appropriate size not less than 400 x 150 mm, suspended from ceiling or fixed to the walls with accessories as required and as directed at site.

Providing & Fixing of Vermi Proof Motor Control Panel fabricated from 14 SWG MS Sheet with stove enamelled paint and comprising for Terrace Pump.

Construction of Additional Four (04) Class Room Building With Toilet, Kitchen Etc. for Madarsha Saminul Olum Sahpur, Ganon, Ghanshyampur at Dist.- Darbhanga Under Madarsha Strengtheing Scheme

Name of Item

Rs (in Lakh)

Rs (in Lakh)