Repair/ replacement of distribution pipe lines including all connected accessories under GE Gurdaspur.

Amount

Excavation in trenches in soft / loose soil not exceeding 1.5m wide and not exceeding 1.5m deep and getting out complete all as specified and directed.

Returning, filling in including spreading, leveling and well ramming in layers not exceeding 25cm thick complete all as specified.

Removing excavated material n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point.

M&L for repair- of leakages GI pipe of size 15 mm by replacing the Tees, bends, sockets unions etc complete including all acessories with necessary exacavation and earth work; returning filling & removal for that job, dewater arrangement is contractors responsibility all as specified and directed by Engineer-in-Cahrge. Note :- One supervisor should report to JE in charge on daily basis with complaint register. The minor complaints should be done by 24 hours of time and major complaints within 48 hours of time frame. Failing which 200/- per day will be levived from the contractor as penalty. The contractor will arrange the security passes for himself/supervisor and his work force as per the existing security of the station without any extra cost.

All as per item srl No 4 here in before but size 20mm bore.

All as per item srl No 4 here in before but size 25mm bore.

All as per item srl No 4 here in before but size 40mm bore.

All as per item srl No 4 here in before but size 50mm bore.

All as per item srl No 4 here in before but size 80mm bore.

M&L for repair of leakages of CI/DI pipes of size 80 mm by replacing the Tees, bends, sockets and providing the other materials required at site such as lead joint, to complete the job including excavation and other earth work. Note :- CI/DI bends, sockets,Y juction,cross,collars,cap,lead joint/tighten joint and connected items will be measured and paid separately

All as per item srl no 10 here in before but size 100mm bore.

All as per item srl No 10 here in before but size 150mm bore.

All as per item srl No 10 here in before but size 200mm bore.

Material and labour for ISI marked CI/DI pipe fittings up to size 80 to 200 mm dia such as bends, Tapers tail pieces, Tee pieces , caps and plug set including rubber ring push on joints complete as specified and directed

Taking out existing 15 mm GI pipe lines for relaying /refixing at site existing/connected all as directed .

All as per item srl No 15 here in before but size 20mm bore.

All as per item srl No 15 here in before but size 25mm bore.

All as per item srl No 15 here in before but size 40mm bore.

All as per item srl No 15 here in before but size 50mm bore.

All as per item srl No 15 here in before but size 80mm bore.

S & F in repair of GI tubing, medium grade, galvanised, with all fittings, laid in trenches of size 15 mm bore all as directed. Make - Oswal/Jindal/TATA

All as per item srl No 21 here in before but size 20mm bore. Make - Oswal/Jindal/TATA

All as per item srl No 21 here in before but size 25mm bore. Make - Oswal/Jindal/TATA

All as per item srl No 21 here in before but size 40mm bore. Make - Oswal/Jindal/TATA

All as per item srl No 21 here in before but size 50mm bore. Make - Oswal/Jindal/TATA

All as per item srl No 21 here in before but size 80mm bore. Make - Oswal/Jindal/TATA

S&F in replacement of gun metal/globe or gate valves of 20mm dia with iron wheel head, ISI marked confirming to IS-780, screwed both ends for iron pipe and fixed. Make - Kirloskar/Leader/Zoloto/L&T

All as per item srl No 27 here in before but size 25mm bore. Make - Kirloskar/Leader/Zoloto/L&T

All as per item srl No 27 here in before but size 40mm bore. Make - Kirloskar/Leader/Zoloto/L&T

All as per item srl No 27 here in before but size 50mm bore. Make - Kirloskar/Leader/Zoloto/L&T

Dismentling old unserviceable valve pits and constructing of brick masonary pits of internal dimensions 1mtr x1mtr x1.2 mtrs ( bottom PCC floor of the pit should be minimum 30 cms below the bottom surface of sluice valve flange to provide sufficient working space) , bottom floor of the pit be constructed in PCC (1:3:6) 15 cms thick with 20 mm stone aggregate, inner and exposed surfaces and bottom floor of the pit should be plastered in CM (1:4) 15 MM thick. The sluice valve and other fittings should be housed in center of the pit. the vertices of the pit should in right angle and champhered .The top cover of the pit will be made out of MS sheet min 2mm thick witth angle iron frame made out of MS angle 50mm x50 mmx 6 mm with galvanised steel hindges two nos ,and locking arrangements duly painted with two coats of water resistant synthetic enamelled paint over one coat of red oxide.

All as per item srl No 31 here in before but size 900X900X900 mm.

All as per item srl No 31 here in before but size 600x600x600 mm.

Taking out existing 100 mm bore CI/DI/MS pipe lines and stacking at site for disposal or reuse all as directed by Engineer in Charge. The site or pipeline for replacement will be decided by Engineer in charge. The decision of Engineer in Charge will be final.

All as per item srl No 34 here in before but size 150mm bore.

All as per item srl No 34 here in before but size 200mm bore.

Supply and Fixing ductile iron (DI pipes) centrifugally cast (span) pressure pipe class K-7size 100mm ISI marked with internal cement mortar lining and external zinc and bitumen coated pipe 100mm bore with all spogot and socket ends with push on rubber gasket joint etc all as directed . Note - laying of pipe may be horizontal or vertical both. Make -Jindal/TATA/Electrosteel

All as per item srl No 37 here in before but size 150 mm bore. Make -Jindal/TATA/Electrosteel

All as per item srl no 37 here in before but size 200 mm bore. Make -Jindal/TATA/Electrosteel

Supply and fix CI sluice valve with forged brass stem class PN- 1.6 ISI marked with stainless steel spindal and flanged both ends of size 80 mm dia bore with hand wheel.al as directed.

All as per item srl No 40 here in before but size 100mm bore.

All as per item srl No 40 here in before but size 150mm bore.

M&L run lead joint 80 mm dia.

M & L for Cutting Cast iron / Ductile Iron pipes of size 80 mm for inserting Tees, bends, ferruls, etc and connecting complete at time of laying of pipes all as directed

M & L in repair of water ferrule (brass ) connection by doing excavation, disconnecting the ferrule and making new ferrule connection/hole on the existing delivery pipe line and supply and fixing of new GI nipple, union, bend, elbow and Tee of 20mm bore and provision of 20mm plug at one side of Tee and refreshing the ferrule connection for smooth supplying of the water to the user end, returning, fillling and removing the excavated material all as direceted. Notes :- (i) Rates quoted by Contractor shall be deemed to include dewatering of water from the trench. (ii) Incase the ferrule connection not working satisfactorily the whole job shall be redone again by the contractor without any extra cost.

M&L for road cutting, including excavation returning filling in spreading leveling, well ramming in layers, filling with broken boudders/stones and repair the road patch with PCC of 1:3:6 along the cutted portion of depth not less than 15cm and make good the road surface for use of the user all as directed by Engineer in Charge

Supply & fixing float valve with brass rod & ball 20 mm dia for PVC tanks including fittings complete all as specified and directed.

Supply and fix in replacement of framed work such as grills, gratings, sheet etc. with ends of bars shoulders and / or riveted, or forged into spikes , framed guard bars, barred iron doors, ladders, framed balusters, railings and similar article as in fabrication for swimming pool including welding work etc complete all as specified and directed.

M&L for preparation of old surfaces paint of overhead tank (any height any type i.e. column type structural closed type) and apply two coat of exterior appex paint (colour or paint as directed by Engineer-in-Charge) in complete including painting with two coats of synthetic first quality paint with proper colour coding of full length or rising main, delivery, washout and overflow pipe including valves etc and marking with arrow of first quality while paint including making of first quality while paint including making black ground surface for marking/writing of date of cleaning, due date of cleaning, capacity of tank in front soide and coulour at height as directed by Engineer-in-Charge. Make of the paint approved by Engineer-in-Charge. (a) Tank capacity 2 lakh gallons. Note: Arrangement of scafoaldings, safety belts, helmets and other safety gears while painting of OHTs are responsibility of contractor. The contractor. The contractor should take the insurance of his workforce who are working on heights. The cost of these security/safety measures are deemed to be included in the quoted rates. Any other safety measures required if left will be considered under quoted rated. Make - Asian Paint/ Berger paint.

All as per Srl item No 49 above but of Over Head Tank capacity 1.5 Lakh Gallons.

All as per Srl item No 49 above but of Over Head Tank capacity 1.0 Lakh Gallons.

All as per Srl item No 49 above but of Over Head Tank capacity below 1.0 Lakh Gallons.

A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

M/S GULATI ENGINEERING WORKS (BID ID -3203104)

kailu construction co (BID ID -3202112)

SUN CHEMICALS (BID ID -3197638)