TN/004/AE/B-II/25-26 dated 19.11.2025

Dismanlting all types of masonry excepting cement concrete plain or reinforced,stacking serviceable materials at site and removing rubbish as directed within a led of 75m. a) in ground floor including roof [P.W.D.(Bldg.). Page- 10, Item- 1]

Labour for Chipping of concrete surface before taking up Plastering work. [P.W.D.(Bldg.). Page- 192,Item - B.(1)]

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. [P.W.D.(Bldg.). Page- 11, Item-10]

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. [P.W.D.(Bldg.). Page- 42, Item - 36.(a)]

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel I. SAIL/ TATA/RINL [P.W.D.(Bldg.). Page- 44, Item-40(I) & 10th Corrigenda ]

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety [P.W.D.(Bldg.). Page- 26, Item-10(a) & 3RD Corrigenda]

Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge. c) 37.5mm thick, [Ref : P.W.D.(Bldg.). Page- 40, Item-27.(c)]

(a) 75 mm. thick brick work with 1st class bricks set in cement, sand mortar (1:4) in ground floor including H.B. netting in every alternate [P.W.D.(Bldg.). Page- 17, Item-21.(a)&3rd Corrigenda]

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. [P.W.D.(Bldg.). Page- 16, Item-16&3rd Corrigenda]

Brick work with 1st class bricks in cement mortar (1:4) (b) In super structure, ground floor. [P.W.D.(Bldg.). Page- 15, Item-7(b)&3rd Corrigenda]

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar. (a) 20 mm thick plaster , [P.W.D.(Bldg.). Page- 189, Item-1(ii). & 3RD Corrigenda]

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar. (b) 15 mm thick plaster, [P.W.D.(Bldg.). Page- 189, Item-1(ii). & 3RD Corrigenda]

Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in - Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency] (a) With Makrana plain pink / Adranga Pink / Garbh Gulabi / Udaypur pink / [P.W.D.(Bldg.). Page- 55, Item-22.b.]

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/ Sq.m. a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative [P.W.D.(Bldg.). Page- 64, Item-35(B)(a)(i) & 3RD Corrigenda]

Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Marble Stone. [P.W.D.(Bldg.). Page- 55, Item-23]

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. ii) Grill weighing above 16 Kg./sq.mtr and above [P.W.D.(Bldg.). Page- 104, Item-13.(a).(i) & 3rd corrigenda]

Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. In ground floor. [P.W.D.(Bldg.). Page- 106, Item-18 & 3rd corrigenda]

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) [P.W.D.(Bldg.). Page- 198, Item-5]

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification andas per direction of the EIC. (In Ground Floor) i) Water based interior grade Acrylic Primer (b) Two Coats [P.W.D.(Bldg.). Page- 196, Item-7.(b).(i)]

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. iii) Two coats. [P.W.D.(Bldg.). Page- 196, Item-10]

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. [P.W.D.(Bldg.). Page- 200, Item-1.(a)]

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : iv) Two coats (with any shade except white) [P.W.D.(Bldg.). Page- 201, Item-2.(b).(iv)]

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (c) Sal : Siliguri. [P.W.D.(Bldg.). Page- 114, Item-1.(c).]

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: (a) 35mm thick shutters (single leaf) [P.W.D.(Bldg.). Page- 124, Item-12.(a).]

PVC Door Shutter-30 mm thick: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular 'L' shaped bracket 100mm x 200mm in each corner of the shutter frame for [P.W.D.(Bldg.). Page- 134, Item-27]

Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete. [P.W.D.(Bldg.). Page- 143, Item-16.(b)]

Door stopper.(Brass) [P.W.D.(Bldg.). Page- 143, Item-19.(i)]

i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (b) 250mm long. [P.W.D.(Bldg.). Page- 142, Item-10.i.c.]

Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868- 1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3- track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white [P.W.D.(Bldg.). Page- 245, Item-15]

Supplying bubble free float glass of approved make and brand conforming toIS:2835-1987. v) 6mm thick clear glass. [P.W.D.(Bldg.). Page- 243, Item-9(v)]

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (a) Fixed type steel windows as per IS sizes with horizontal glazing bars. [P.W.D.(Bldg.). Page- 107, Item-20]

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. [Ref : P.W.D (Bldg) 2017, Page-12, Item No. 13]

Sanitary Work : Supply of UPVC pipes (B Type) & fittings conforming to IS- 13592-1992.. (A) (i) Single Socketed 3 Meter Length. [P.W.D.(S.&P.). Page-68, Item-23] (a) 75 mm

(iii) Door Tee, (a) 75 mm

(vii) Door Y, (a) 75 mm

Supply of PVC pipes & fittings (medium duty) conforming, (A) PVC Pipes 25 mm dia

O) solvent vement 250gm

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (vii) 25 mm dia [P.W.D.(S.&P.). Page-4, Item-4/vii]

Chromium plated Bib Cock with wall flange (Equivalent to Code No. 5047 & Model - Florentine of Jaquar or similar brand). [P.W.D.(S.&P.). Page-6, Item-7.(c).(ii)]

Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). [P.W.D.(S.&P.). Page-6, Item-7.(d).(i)]

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). (i) 580 mm X 440 mm [P.W.D.(S.&P.). Page-79, Item-4.(i)]

Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989/ 2009 and 1729/ 2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately). (A) 'P' Trap iii) 100 mm [P.W.D.(S.&P.). Page-65, Item-14.(A).(iii)]

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats

of painting to bracket etc. [P.W.D.(S.&P.).Page-36,Item-2]

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved mark in position with brass screws on 75 mm X 75 mm X 75 mm wooden block complete. (i) 635 mm X 395 mm X 420 mm [P.W.D.(S.&P.). Page-80, Item-6.(i)]