REPAIRS/MAINT OF INTERNAL WATER SUPPLY, SANITARY FITTINGS, PLUMBING WORKS AND REPAIR TO SUNKEN FLOOR TREATMENT TO VARIOUS MD AND OTM ACCN, ROOF TREATMENT AND ALLIED WORKS TO VARIOUS BUILDING AT HQTC BANGALORE

Amount

Taking up or down 15 mm bore steel tubing medium grade and re-fixing the same steel tubing and connections in new or old position, including cleaning for refixing complete to walls or ceilings or laid in floors complete,all as specified and directed.

Taking up or down 20 mm bore steel tubing medium grade and re-fixing the same steel tubing and connections in new or old position, including cleaning for refixing complete to walls or ceilings or laid in floors complete,all as specified and directed.

Taking up or down 25 mm bore steel tubing medium grade and re-fixing the same steel tubing and connections in new or old position, including cleaning for refixing complete to walls or ceilings or laid in floors complete,all as specified and directed.

S&F tubes 15mm bore, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down old steel tubing complete,all as specified and directed.

S&F tubes 20 mm bore, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down old steel tubing complete,all as specified and directed.

S&F tubes 25 mm bore, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down old steel tubing complete,all as specified and directed.

S&F of CPVC pipes with outer dia 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including elbow, Tee and all necessary fittings etc complete all as specified including taking up or down old pipe.

S&F of CPVC pipes with outer dia 25mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including elbow, Tee and all necessary fittings etc complete all as specified including taking up or down old pipe.

S&F of CPVC pipes with outer dia 32mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including elbow, Tee and all necessary fittings etc complete all as specified including taking up or down old pipe.

Cutting chases, pinning in stone concrete block or slab walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as specified and as directed by Engr in Charge

Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as specified and as directed by Engr in Charge

Demolition of cement concrete (unreinforced) in in any description and in any position otherwise specifically provided for all as specified and as directed by Engr in Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L cement concrete type D-2, 1:4:8, using 40mm graded aggregate as in foundations, fillings and mass concrete.

M&L for sunken slab treatment comprising of following :- (a) Taking out/down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish out of campus complete all as specified and directed. (b) M&L for 25mm thick PCC type B1 (Using 20 mm graded stone)aggregate over cleaned sunken slab surfaces. (c) M&L for applying bituminus priming coat/tack coat coat over PCC surfaces @ 0.30Kg/Sqm of surfaces. (d) M&L for 4mm thick APP modified water proofing membrane weighing not less than 4 kg/sqm reinforced with non woven polyster mat weighing not less than 160 gm/sqm including minimum 10cm lap torch sealed and bound. (e) M&L for applying bitumen grade 85/25 over primer coat @ 1.20 Kg /Sqm (f) M&L for 15 mm thick plastering in CM 1:4 mixed with liquid water proofing admixure as per manufacturers instructions complete all as specified and directed by Engr-in-charge. (Note : WPC shall be measured and paid separately)

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in flooring all as specified.

M&L for Vitrified Ceramic tiles in light shade 8-10mm thick of size 600mm x 600mm in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed of CM 1:6 and pointed in white/ coloured cement to match all as specified and as directed by Engr in Charge

All as per item above but as in wall skirting incl rendering in cement morter 1:4 of 10 mm thick as backing coat complete as directed by Engr in Charge

M&L for non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed of CM 1:6 all as specified and directed by Engr in Charge

All as per item above but as in wall skirting incl rendering in cement morter 1:4 of 10 mm thick as backing coat complete as directed.

M&L for non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed of CM 1:6 all as specified.

M&L for glazed ceramic coloured/digital tiles in vertical surface 350x250mm x 7mm/ 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick bedding layer of cement mortar 1:4.all as specified and as directed by Engr in Charge

M&L for glazed ceramic coloured tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick bedding layer of cement mortar 1:4.all as specified and as directed by Engr in Charge

M&L for 20mm thick Granite (Jet black) of any type work (table rubbed and polished) in cooking plateform, widow sill and like, in cement mortar (1:6) of 15 mm thincluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade granite all as specified and as directed by Engr in Charge

M&L for drip grooves 20mm wide x 15mm deep provided at 50mm from the end of ceilings, roofs, chajjas, balconies and similar suspended areas etc. complete all as specified and as directed by Engr in Charge

M&L for preparation of old decorated plastered or unplastered surface of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white washing complete all as specified and as directed by Engr in Charge

M&L for preparation of old decorated plastered or unplastered surface of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coat of white washing complete.

M&L for preparation of old decorated plastered or unplastered surface of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white washing complete.

M&L for preparation of old decorated surface of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion through mechnical means complete all as specified and directed by Engr in Charge

M&L for preparation of old decorated surface of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of distemper oil emulsion through mechnical means complete all as specified and directed by Engr in Charge

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each

S&F solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) all as specified and as directed by Engr in Charge

S&F factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site etc. complete all as specified and as directed by Engr in Charge

M & L 30mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel.

S&F for 200mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F 150mm Aluminium handles, cast type anodised.

Taking down door/ window shutters of any description exc 1 sq. m and n exc 2 sqm resecuring or easing & adjusting and refixing in same opening all as specified.

M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed.

S&F in repair sheet glass, of 4mm thick ordinary quality, ground or obscured or frosted, on one side in square n.exc 0.5 Sqm in each pane.

S&F in repairs PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F in repairs PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints, fixed to wall

S&F in repairs PVC (SWR) pipes 150mm bore, single socketed, in any length with rubber ring joints, fixed to wall

S&F in repairs PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints, fixed to wall for above four to eight storey building including necessary scaffolding at any position building including necessary fixing cleats/clamps etc complete all as specified and directed.

S&F in repair 100mm sand cast iron soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor or fixed with wall including necessary fixing cleats/clamps fixed in repair complete all as specified and directed.

S&F in repair 100mm sand cast iron soil waste and vent pipes in any length with or without ears with cement joints fixed to walls for above four to eight storey building including necessary scaffolding at any position building necessary fixing cleats/clamps etc complete all as specified and directed

S&F in repairs 110 mm bore PVC (SWR) Junction single (Single T) equal or unequal all as specified.

S&F in repairs 110 mm bore PVC (SWR) branch piece single (Single Y) equal or unequal all as specified.

S&F in repairs 110 mm bore PVC (SWR) branch piece Double (Double Y) equal or unequal all as specified.

S&F in repairs 110mm bore PVC (SWR) bends of any radius all as specified.

S&F in repairs PVC (SWR) bends 110mm bore vent cowl

S&F in repairs PVC (SWR) 'P' or 'S' trap 110mm bore.

S&F in repairs 100 mm bore cast iron soil waste branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel all as specified.

S&F in repairs 100mm bore cast iron soil waste bends of any radius all as specified.

S&F in repairs cast iron soil waste 100mm bore vent cowl

S&F in repairs cast iron soil waste 'P' or 'S' trap 100mm bore.

S&F in repairs PVC (SWR) pipes 75mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F in repairs PVC (SWR) pipes 75mm bore, single socketed, in any length with rubber ring joints, fixed to wall

S&F in repairs PVC (SWR) pipes 75mm bore, single socketed, in any length with rubber ring joints, fixed to wall for above four to eight storey building including necessary scaffolding at any position building including necessary fixing cleats/clamps etc complete all as specified and directed.

S&F in repair 75 mm cast iron soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor or fixed with wall including necessary fixing cleats/clamps fixed complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) Junction single (Single T) equal or unequal all as specified.

S&F in repairs 75 mm bore PVC (SWR) branch piece single (Single Y) equal or unequal all as specified.

S&F in repairs 75 mm bore PVC (SWR) branch piece double (Double Y) equal or unequal all as specified.

S&F in repairs 75mm bore PVC (SWR) bends of any radius all as specified.

S&F in repairs for Mild steel work in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; plate washers and similar small articles conforming to FE-290 Gde-E-165 all as specified and as directed by Engr in Charge

S&F in repar one piece floor mounted toilet water closet of size (WxPxH) 350x665x750mm white or tinted, S-trap 300/ 220/ 110mm or P-trap 180mm, UF ezee close seat cover, wash down system, with flush mechanism and fixed in repairs with necessary fixing bolts/ screws etc complete all as specified, Make Somany, Cera, or equivalent.

S&F in repair one piece floor mounted toilet water closet of size (WxPxH) 380x680x755mm white or tinted, S-trap, 220mm, trendy square design, slim UF ezee close seat cover, wash down system, dual flush (6/3 ltrs) mechanism and fixed in repairs with necessary fixing bolts/ screws etc complete all as specified, Make Somany, Cera, or equivalent.

S&F in repair one piece wall hung toilet water closet of size (WxPxH) 360x645x750mm white or tinted, P-trap, kape seat cover ezee close, kape cistern, uniek/ kape internal fittings- dual flush mechanism and fixed in repairs with necessary fixing bolts/ screws etc complete all as specified, Make Somany, Cera, or equivalent.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white or tinted (excluding flushing cistern and flush pipe), including plastic water closet seat, black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

S&F in repairs vitreous china, semi-pedestal pattern (Anglo-Indian Type) wash down water closet, white or tinted (excluding flushing cistern and flush pipe), including plastic water closet seat, black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white or tinted, with integral foot rests (excluding flushing cistern and flush pipe).

S&F in repairs PVC valveless, syphonic action type, flushing cistern of 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern all as specified and as directed by Engr in Charge

S&F in repairs plastic water closet seat, white or tinted, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and as directed by Engr in Charge

S&F ceramic wash basin of size (WxPxH) 490x430x127mm, white or tinted, counter top, including waste coupling chromium plated etc. and fixed in repairs over granite or wooden cabinet including necessary adhesive or fittings complete all as specified. Make Somany, Cera or equivalent

S&F ceramic wash basin of size 550x460mm, white or tinted, counter sunk, including waste coupling chromium plated etc. and fixed in repairs in granite or wooden cabinet including necessary adhesive or fittings complete all as specified. Make Somany, Cera or equivalent

S&F in repairs vitreous china wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed

S&F in repairs glass corner shelf assembly fancy type made of 5 to 6mm thick glass of size 250 x 250mm fixed with brass CP brackets complete all as specified and directed.

S&F in repairs sheet glass shelf assembly with L clamp consisting of 5 to 6mm thick glass 12 to 15cm wide with brass CP bracket guard and railing 45 to 60cm long complete all as specified and directed.

S&F in repairs mirror cabinet with Modiguard/Saint Gobain mirror of size not less than 500mmx350mmx125mm complete all as specified

S&F in repairs 6mm thick mirror of any size including rounding and polishing of edges with necessay fittings

S&F in repairs Brass cromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges

S&F in repairs Soap dish, any type of size approximate size 160x 60x90mm, fixed to plugs with chromium plated brass screws

S&F in repairs 5mm thick mirror of size 450mm x 600mm mounted on 6mm thick commercial ply wood backing and screwed with PVC channel alround.

S&F in repairs premium quality 15mm bore central hole basin mixer with regular spout without popup waste system of make Jaguar, Cera, Somany or equivalent.

S&F in repairs premium quality 15mm bore wall mixer system with provision for overhead shower complete with 115mm long bend pipe, connecting Legs & wall Flange of make Jaguar, Cera, Somany or equivalent.

S&F in repairs 15mm bore hand shower (Health Faucet) with 8mm Dia, 1 Meter Long flexible tube & wall hook of make Cera, Parryware, Somany, Jaguar or equivalent.

S&F in repairs 15mm two in one Bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified.

S&F in repairs premium quality 15mm bib tap with wall flange of make Jaguar, Cera, Somany or equivalent.

S&F in repairs premium quality 15mm angular stop cock with wall flange of make Jaguar, Cera, Somany or equivalent.

S&F in repairs concealed stop cock 15mm bore, fancy type chromium plated with brass material and fixed all as specified.

S&F in repairs 15mm Bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified.

S&F in repairs 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "Hot" or "Cold" with long screwed shank and fly-nuts, screwed for iron pipe and fixed all as specified.

S&F in repairs Brass chromium plated shower rose 125mm size all as specified.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm all as specified.

S&F in repairs 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, asins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F in repairs Grating doom 100/125mm dia with or without waste hole of PTMT. (Minimum weight 40gms)

S&F in repairs Grating doom 100 - 125mm dia with or without waste hole of stainless steel.

S&F in repairs kitchen utensil rack in steel made of premium grade stainless steel and highly durable and rust-proof of size not less than 90cmx80cmx20cm complete all as specified

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed by Engr in Charge

S&F in repairs 15mm brass tap spindle, 100-200g corrosion resistant all as specified

Dismantling water tanks, capacity in litres exc 250 & n exc 500 and removing to store.

Dismantling water tanks, capacity in litres exc 500 & n exc 1000 and removing to store.

S&F rotational moulded polyethylene water storage tanks, capacity in litres 500 (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F rotational moulded polyethylene water storage tanks, capacity in litres 1000 (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F in repair ball valves 20mm dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms)

S&F in repair ball valves 25mm dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 455gms)

S&F in repairs 20mm Ball brass valves,high pressure,with polythenefloat and flynut complete,screwed for ironpipe or brass ferrule and fixed as per requirment of site .

S&F in repair self threaded water tank Lid /cover with frame "'cooltex type' fixed to existing tank 500/1000 Ltrs capacity with joint nut and bolt all as specified and as directed.

S&F in repair vitreous china urinals bowl type (back or corner wall type) complete including providing and fixing plugs bedding urinals against wall in cement mortar 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets flush pipe grating and union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern trap and waste pipe)

S&F in repair vitreous china urinals half stall urinal type(back or corner wall type) complete including providing and fixing plugs bedding urinals against wall in cement mortar 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets flush pipe grating and union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern trap and waste pipe)

S & F in repairs complete sensor assembly for urinal pot complete all as specified and as directed by Engr-in-charge

S & F in repairs toilet paper holder of brass chromium plated and fixed to wall with necessary brass screws complete all as specified.

S&F in repairs 20mm Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm?45gms /25mm- 65gms)

S&F in repairs 20mm gun metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed.

S&F in repairs 25mm gun metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed.

Demolition mud/ mud phuska in roofs, any thickness, including plastering, tiling and leeping (whether full thickness removed or only a part thereof)

M&L for 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) all as specified.

M&L for 75mm thick Cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) all as specified.

M&L cement concrete 1:2:4, type B1 (20mm graded stone aggregate) as in padding over roof, roof kerbs or mud stops, rounded or chamfered on edges

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dresses stonework and precast concrete articles.

M&L for Pre-cast cement concrete block type C1 1:3:6 (20mm graded stone aggregate) masonry with solid blocks, exc. 10cm in width and setting in mortar 1:6 complete.

M&L Providing precast cement concrete solid building blocks or slabs 10cm thick of Type C1 1:3:6 (20mm graded aggregate) (with plain or interlocking joints as directed) setting in mortar 1:6, complete, in walls

M&L for rendering 10mm thick cement plaster in cement morter 1:3, mixed with liquid water proofing compound on fair faces of brick work or concrete surfaces or roof surfaces, finished even and smooth without using extra cement. Note: Liquid WPC will be measured and paid separately

Roughening surfaces of old concrete floor by picking, sweeping clean and washing all as specified.

M&L Brushing neat cement slurry with 3.0 kg of cement per sq. metre all as specified.

Taking down old damaged existing water proofing membrane of any thickness from roof top complete all as specified and directed.

M&L for water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer & 0.20 Kg/Sqm and providing 4 mm thick APP modified water proofing membrane weighing not less than 4 Kg/Sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm including minimum 10 cm side lap and 15 cm end lap torch sealed and bonded and applying a coat of blown grade hot bitumen 90/15 over and below the membrane @ 1.20 Kg/Sqm in drying over the membrane finished with solar reflective bituminous aluminium paint/primer @ 0.1 Kg/Sqm over RCC roof slab/ projection/ parapet after cleaning the surfaces by removing dust dirt etc as manufactures instructions complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, RCC slab etc. including racking out joints, hacking for key, scrubbing down with water, etc. all as specified.

M&L for Rendering 15mm thick on fair faces of brick works or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement all as specified.

M&L for rendering 15mm thick cement plaster in cement morter 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement. Note: WPC will be measured and paid separately

M&L for 2coats of distemper oil emulsion in wall surface white or tinted through mechnical means over a coat of 1mm thick wall care putty, including preparation of new surface all as specified.

M&L for preparing new plastered on wall and applying three coats of white wash.

M&L for 2 coats of cement paint over a coat of priming plastered and other surfaced with alkali resistant priming paint through mechnical means including preparation of new surfaces all as specified.

Rendering 5mm thick cement plaster in cement morter 1:3, on concrete sufaces as in ceiling, finished even and smooth without using extra cement.

M&L for preparing new plastered on ceiling and applying two coats of white wash.

Taking down cement or cement lime plaster, any description on brick or stone walls, RCC slab etc. including racking out joints, hacking for key, scrubbing down with water, etc. all as specified for 5th floor and above including necessary scaffolding.

M&L for rendering 15mm thick cement plaster in cement morter 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement for 5th floor and above including necessary scaffolding. Note: WPC will be measured and paid separately

M&L for 2 coats of cement paint through mechnical means over a coat of priming plastered and other surfaced with alkali resistant priming paint including preparation of new surfaces all as specified for 5th floor and above including necessary scafolding.

Supply only liquid water proofing compound.

M&L for digging out roots of bushes, small trees, grass of any dia & girth from accessible roof projection, chajjas, wall junction, parapet etc at any height and applying herbicide 2,4-Dichlorophenoxyacetic acid including necessay demolition of brick work/ stone masonary/ conrete/ RCC wall or slab etc and filling holes and levelled with cement concrete B-0, 1:2:4 (12.5mm graded stone aggregate) and necessary rendering of cement mortar 1:4 and after applying damp proof epoxy based primer and paint the surface matched with existing surfaces complete all as specified and directed.

M&L for digging out roots of bushes, small trees, grass of any dia & girth from inaccessible roof projection, chajjas, wall junction, parapet etc up to roof top of 4th floor and applying herbicide 2,4-Dichlorophenoxyacetic acid including necessay demolition of brick work/ stone masonary/ conrete/ RCC wall or slab etc and filling holes and levelled with cement concrete B-0, 1:2:4 (12.5mm graded stone aggregate) and necessary rendering of cement mortar 1:4 after applying damp proof epoxy based primer and matched with existing surfaces complete all as specified and directed. Note: Rates for necessary scafolding are included.

M&L for digging out roots of bushes, small trees, grass of any dia & girth from inaccessible roof projection, chajjas, wall junction, parapet etc from roof top of 4th floor and above and applying herbicide 2,4-Dichlorophenoxyacetic acid including necessay demolition of brick work/ stone masonary/ conrete/ RCC wall or slab etc and filling holes and levelled with cement concrete B-0, 1:2:4 (12.5mm graded stone aggregate) and necessary rendering of cement mortar 1:4 after applying damp proof epoxy based primer and matched with existing surfaces complete all as specified and directed. Note: Rates for necessary scafolding are included.

M&L for struck/flush/ key pointing in cement mortar 1:3 with WPC to block in course or stone/ wall masonry or concrete block walling including racking out old pointing incl necessary scaffolding etc. complete all as specified and directed by Engineer-in-Charge

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work

M&L for reinforced cement concrete type B0-1:2:4 (12.5mm graded aggregate) as in beams, cantilevers, slab, bressummers, lintels over 1.5m span

M&L for form work to sides and soffits of floor or roof beam, beam haunchings, girders, bressumers, lintels, cantilevers, shelves, including supports overhangs, etc finished rough in flat surface.

M&L MS TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending and binding with MS wire annealed not less than 0.9 mm dia all as specified and as directed

M&L for applying a coat of blown industrial bitumen of grade 85/25 or 90/15 applied hot to concrete, wall surfaces @ 1.2Kg/Sqm or as required including cleaning the surfaces all as directed by Engr in charge.

M&L for applying two coat of blown bitumen of grade 85/25 or 90/15 applied hot to concrete, wall surfaces @ 1.2Kg/Sqm per coat or as required as directed by Engr in charge.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming Fe 410-W (Gde E-250) quality A, complete.

Preparing new steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zinc primer, complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall or in door, fixed with self tapping screws as specified.

M&L for Cleaning and removing all scale and dirt,and wiping,drying etc, from tanks and from mouths of circulating pipes,rotational moulded polyethylene water storage tanks, capacity in n. exc.1000 liter (cylindrical vertical with closed top) hoisted all as directed.

M&L for Cleaning and removing all scale and dirt,and wiping,drying etc, from tanks and from mouths of circulating pipes,rotational moulded polyethylene water storage tanks, capacity in litres exc.1000 and n. exc 2000 ltr (cylindrical vertical with closed top) hoisted all as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. After cleaning repairing, and removing all scale dirt and wiping, drying etc complete capacity in ltr n. exc.1000 liter (cylindrical vertical with closed top)all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. After cleaning repairing, and removing all scale dirt and wiping, drying etc complete capacity in litres exc.1000 and n. exc 2000 ltr (cylindrical vertical with closed top)all as specified and directed.

Removing old dumped junk/ building materials/ debris/ tree roots, trunk, & branches of any size etc. to a distance of 30Km or beyond, out of premises of defence area, including loading, unloading by manually or by mechanical means (JCB) and to be transported through tractor-trolly or tipper and stacking at the destination.

NANDI CONSTRUCTIONS

SRUSHTI CONSTRUCTIONS

M/s BHOOMI ELECTRICALS