PROVN OF CERTAIN SANCTIONED WORKS (B/R) UNDER AREA AGE BR I AT GE (N) AHILYANAGAR

Amount

Taking down cement plaster on brick or concrete surfaces on wall/ ceilling /stone/block etc including racking out joint, hacking for key,scrubbing down with water etc all as specified and as directed.

Demolition of brick work or stone/ boulder masonry/PCC block, built in cement mortar or cement lime mortar including all quoins, pillars etc.

Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings all as specified and as directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6

M&L for flush pointing to random rubble masonry, uncoursed or brought upto courses CM 1:4

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished even and smooth without using extra cement

M&L for rendering 10 mm thick in CM 1:6 over brick surfaces, finished even and smooth without using extra cement all as specified and as directed.

M & L applying two coats of OBD over a coat of primer on newly plastered wall surfaces over 2 mm thick of wall care putty preparation of surfaces all as specified and as directed.

M&L for preparing new plastered surfaces and applying Two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls.

Supply only integral water proofing compound

M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying a coat of cement base paint on surfaces of walls.

M&L for Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint).

Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes

M&L for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base all as directed.

Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removal of debries to a distance not exceeding 100m all as specified and as directed.

S&F light shade Virified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 .

S&F light shade vitrified ceramic tiles 8 to 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in vertical surfaces such as skitings, dado set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

S&F Non-skid Coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) size of each tiles 400x400 mm in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6

M&L for Glazed ceramic coloured tiles in vertical surface 350*250*7 to 8mm /450x350x7mm to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in backing of skirting and dado including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thicknesss in floors, aprons etc.

M&L for Providing and laying 60mm thick factory made glossy finished chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Taking down of chowkat with shutter without taking off shutters from the frame not exceeding 1.5sqm for architraves, soffits, linings, window boards, etc all as specified and as directed.

M&L for Aluminium framed windows / Door any pattern, fixed/side hung/silding (three track) using powder coated alluminium sections(minimum 50mic), of approved make with or with out sash bars suitable for 4mm thick glazing including necessary jointed cleats, handles, glazing all as specified Note-: (glazing shall be measured and paid separatly)

S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

S&F sheet glass ordinary quality 3 mm thick exceeding 0.5 sqm in each pane all as specified and as directed.

S&F sheet glass ordinary quality 4.8 mm thick exceeding 0.5 sqm in each pane all as specified and as directed.

M&L for 18-20mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like in cement (1:4) including pointing in wihte cement (1:2) using marble dust with admixture of pigment ot match with shade of granite including 20mm thick screedbed of CM 1:4 complete all as specified and directed.

M&L for mild steel frame work such as grills with ends of bar shouldered, welded or forged into spikes conforming to Fe 410-0 or Fe 310-0 and taking down old one .

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel Squartube with singal side prelam PVC sheet used instead of plain colour PVC sheed & edges will be painted to match with prelam sheet & fixed in position as per manufacturer's instruction all as specified, as shown on drawing on page No 160 of SSR Part-II 2010

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board coare supplying & fixing in frame at site as per specification & drawing on sl. page no. 161 of SSR part II 2010

M&L for Fe-410W(GdeE-250) quality B Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as spd and as directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel / wooden fillet / steel / aluminium frame all as specified and as directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F 30mm thick flush door shutter soild core construction with block board core and plywood face panels commercial type on both sides .

S&F butt hinge, stainless steel 100mm long all as specified and as directed.

S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.

S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 250 mm long and fixed all as specified and as directed.

S&F Floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm all as specified and as directed.

S&F aluminium anodised barred tower bolt of extruded section 200 mm long and fixed all as specified and as directed.

S&F extruded aluminium alloy handle fabricated type anodised 150 mm long

M&L for preparing new surfaces of wood of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

.-Ditto- all as per Ser item 45 above but on steel surfaces over red oxide primer

S&F for 25mm dia curtain rod stainless steel with end fitting not less than 75 gms each and fixed with steel screw in brackets to walls complete all as specified and directed.

S&F in repair aluminium extruded Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Dismantling boarding, any description, fixed in wall or ceiling, any position with nails

S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M&L for 4mm thick non asbestos fibre cement building boards of make 'E Board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework complete all as specified and directed .

S&F in repair vitreous china wash basin, white back, size 550 X 400 mm , errecting on existing CI brackets including taking down old one alll as specified and as directed . Note: If the mentioned size is not available in the market, the next immediate higher size shall be provided by the contractor.

S&F vitreous china wash basin, white back, size 500 X 400 mm x 190 mm , errecting on existing CI brackets alll as specified and as directed. Note: If the mentioned size is not available in the market, the next immediate higher size shall be provided by the contractor. Make of Cera Code : S2040121 or others equvelent in jaquar and Hindware

S & F Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified.in repairs including seat cover with brass screws and excluding flush pipe and flushing cystren

S&F in Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe waste pipe complete all as specified and as directed.

S&F PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including taking down old one all as specified and as directed

S&F in repair brass chromium plated hand shower (Health foucet) with 1 meter long easy flex tube in chrome finish and wall hook with NRV (back flow preventer ) all as directed.

Taking up or down steel tubing 15mm dia and connections, including cleaning for re- fixing or removal to store

Taking up or down steel tubing 20mm dia and connections, including cleaning for re- fixing or removal to store

Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including connecting to existing GI pipe line complete all as specified

Supplying and laying 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including connecting to existing GI pipe line complete all as specified

Supplying and laying 25mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including connecting to existing GI pipe line complete all as specified

Dismantling existing PVC water tanks of capacity exc 250 litres & n.exc 500 litres all as directed and removed from site. NOTE:-Dismantled water tank shall become the contractors property as per Sch of credit.

Dismantling existing PVC water tanks of capacity exc 500 litres & n.exc 1000 litres all as directed and removed from site. NOTE:-Dismantled water tank shall become the contractors property as per Sch of credit.

S&F 500 capacity in litres rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted & fixed in position all as specified in SSR part I and Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as spd and as directed.

.-Ditto- all as per Ser item 66 above but 1000 ltrs

S&F in repair tubular towel rail, aluminium 20mm dia, D type, 60cm long between flanges

S&F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

Supply only 15 mm bore Fancy type pillar taps (Swan neck), Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F in repair 15mm dia Chromium plated fancy type Bib taps cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as spd & directed

Supply only in repair waste coupling of PTMT 32mm (half or full threaded) sutable for kitchen sink. (Minimum weight 32mm- 45gms/40mm-60 gms)

S&F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)

S&F in repair Chromium plated shower roses 125 mm size with or without swevel joints and size including fixing to steel pipe in 15mm dia.

S&F in repair for Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repair for PVC connections 15mm size with PTMT nuts of length 450mm

S & F in repair for 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.

S & F 150 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors or trenches.

S & F 110 mm bore PVC (SWR) bends of any radius.

S & F 110 mm bore PVC (SWR) bends of any radius with access door.

S & F 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door.

S&F in repair PVC (SWR) pipes single socketed, 75mm dia in any length with rubber ring joints, laid in trenches or in floors

S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.

S&F in repair for PVC (SWR) bends any radius 75mm bore

S&F 75 mm bore PVC (SWR) bends of any radius with access door.

S & F 75 mm bore PVC (SWR) Vent Cowl

S&F in repair for PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

M&L for 75 mm thick cement concrete type C-2, 1:3:6 (Using 40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection including joints and bitumen filling complete all as spd and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil.

Excavation in trenches n.exc 1.5M wide and N.exc 3.0 M in depth for foundation etc or for shafts, wells, casspits, manholes pier holes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil all as specified and directed by engineer-in-charge

Excavation over areas not exceeding 1.5 M deep and getting out in soft / loose Soil

M&L for PCC 1:4:8 type D-2(40mm graded aggregate) in foundation , sub base, filling and mass concrete.

M&L for Hardcore of broken stone of gauge n exc 63mm deposited, spreaded & levelled in layers n exc 15cm thick including watering and ramming etc complete.

M&L for Moorum filling in floors/pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed/ rolled including watering to required level and gradient.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat rough finished complete all as specified and directed .

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed .

M&L for Mild steel TMT bars in stirrups, spacers and binders for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for RCC (1:2:4) nominal mix type B1 using 20mm graded stone agregate Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed .

M&L for RCC (1:2:4) nominal mix type B1 using 20mm graded stone agregate Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed .

M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 complete all as specified and directed .

S&F steel water tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of 15 mm bore.

S&F steel water tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of 20 mm bore.

S&F stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe 15mm (fancy type chromium plated).

S&F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and 32mm dia PVC pipe for connect to wc complete all as specified and as directed

S&F in in repair vitreous china squatting pan of orrisa pattern, size 580X 440x300 mm white, with integral foot rest 'P' or 'S' trap, complete all as specified and as directed.Make of Cera or others equvelent in parryware and Hindware

S&F RCC Class NP 2, 150 mm bore pipes laid and jointed complete with collars.

M&L for PCC( 1:4:8) type D2 using 40 mm graded aggregate as in concrete bed to drain pipes 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified.

M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in surface channels/drains, etc complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms,moulds, mitred/stopped end etc.

S&F for precast hume pipe septic tank of capacity 50 users incl necessary excavation, RFR, Removing of soil and earthwork in any type of strata all as specified and directed by Engr-in-Charge.

S&F Rolled Mild Steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410 - W (Gde E-250)quality-A,

Returning filling under floor including spreading, watring and well ramming in layer n.exc 25cm each in hard/dense soil.

Removing excavated soil n.exc 50mand depositing where directed at a level n.exc 1.5M above the starting point complete all as directed by Engineer-in-Charge

Removing excavated material of soil exc. 250 m but n exc. 500 m and depositing where directed

Rough dressing of the lawn area, flower beds, planter areas, shrubery or ground cover areas, including trenching to a depth not exc 150 mm (averaging, breaking lods flooding with water, uprooting weeds from area after 10 to 15 days of its flooding including disposal of uprooted vegetation/ removal of rubbish to a distance exc 500m and n exc 1.50 km outside the MD land complete all as specified and as directed.

.-Ditto- all as per Ser item 121 above but for Grafted Orange trees

.-Ditto- all as per Ser item 121 above but for Chikoo trees

.-Ditto- all as per Ser item 121 above but for Guava trees

.-Ditto- all as per Ser item 121 above but for Jamun trees

.-Ditto- all as per Ser item 121 above but for Imli trees

.-Ditto- all as per Ser item 121 above but for Amla trees

.-Ditto- all as per Ser item 121 above but for Lemon trees

.-Ditto- all as per Ser item 121 above but for Kinu trees

Surface excavation n. exc 30 cm depth and averaging of 15 cm depth and getting out in soft/losse soil,size of pit 0.45x0.45x0.45 mtrs deep, hedge plants minimium of height 06 inches, type of hedges, Golden Duranta complete all as specifed and as directed.

Supply, fixing, testing, commisioning irrigation system manually operated with and including ISI Marked PVC pipe 40 mm bore ,Sprinkler ball valve including all excvation and earth work complete.

Supply only sprinklers including QRC keys all fittings and accessories complete.

Maintenane and supervision of trees, plants, shurbs, climbers, lawn grass etc including watering, pruning, spraying of pesticides, insecticides in the desired periodicity, weeding watering and replacing the dead plants/grass with new plants/ grass etc and periodical maintenace 7 painting of tress guards from the certified date of completion of Ph-I work. (Trees, Plants, srubs, lawn grass etc planted/executed under item no 121 to 129 shall be maintained for 03 month under this item)

Excavation in any kind soil by mechanical means (Hydraulic Excavator) means over areas (exc 30 cm depth, 1.5 m width aswell as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5 m as directed by Engineer-in-charge.

Excavation in any kind soil by mechanical means (Hydraulic Excavator) means over areas (exc 30 cm depth, 1.5 m width aswell as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m to 3.00m as directed by Engineer-in-charge.

Excavation in any kind soil by mechanical means (Hydraulic Excavator) means over areas (exc 30 cm depth, 1.5 m width aswell as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 3.00m to 4.50m as directed by Engineer-in-charge.

M&L for Boulder filling dry, handpacked tightly in recharge pit etc and raising (or lowering) to the required level.

M&L for Loose filling with aggregates of guage 80 to 150 mm in soakage wells.

M&L for Loose filling with aggregates of guage 40 to 80 mm in soakage wells.

M&L for Loose filling with aggregates of guage 12.5 to 40 mm in soakage wells.

M & for Precast Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) set in 1:4 as in cover slabs (for Manhole etc) & similar articles with plain faces complete. (Reinforcement will be measured and paid seperately) complete all as specified and directed.

S&F in replacement square profile LED lighting fixture with extruded environmental friendly, energy efficient ready to use pack LED Tube light fitiing 10 Watt with LED light source 6500 K,input voltage 140V-270V with uniform light output, with all accessories including its connection with 2 core seathed cable of size 0.5 Sqmm with etc complete all as specified and directed by Engineer-in-Charge.

S&F in replacement square profile LED lighting fixture , environmental friendly, energy efficient ready to use pack Aluminium housing LED Tube light fitiing 22 Watt or higher side with LED light source 6500 K,input voltage 160V-270V with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge .

Supply and fix ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge .

Supply & fix in replacement energy saving and environmental friendly long life LED street light 30 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including twin core twisted flexible copper conductor cable of suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge

Taking down carefully copper/aluminum point wiring (light/ fan/bell/ socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Charge.

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl PVC Casing and capping ISI Marked with its accessories PVC boxes (upto 18 module suitble for Mylinc series of Legrand including white plates with frame upto 18 module of make suitable for Mylinc Series ) for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2.Wiring shall be done as per complaints recd from user only on required basis it is not necessary to do whole wiring of any whole bldg 3. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light point controlled by switch 5 Amp single pole one way

One Fan point controlled by switch 5 Amp single pole one way

One bell point controlled by switch 5 Amp single pole one way

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

S&F Socket outlet 2 in 1 3 pin, 6/16 Amp, flush type

S&F Socket, 6 Amp,3 Pin 230V AC etc complete all as specified and directed by Engineer-in-Charge.

.-Ditto- all as per Ser item 147 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board

S&F switch piano flush type single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge .

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge

S &F Switch piano, flush type single pole, one way 16 Amps

S&F Socket outlet 2 in 1 3 pin, 6/16 Amp, flush type

S&F in replacement bell ding dong elelctric 230V AC single pole etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement Modular Switch, 6 Amp, one way, one Module as per existing. etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement Modular Switch, 16 Amp, one way, one Module as per existing. etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement Modular Socket Outlet 6 Amp, 3 pin, combined two module etc as per existing complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Modular Socket Outlet 6 Amp / 16 Amp - 2/3 pin combined two module as per existing etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement Modular Bell push, 6 Amp, one module etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement Modular Fan Regulator Fan step regulator, 120 Watt - two module etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge.

S&F in replacement ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge .

S & F in replacement double door Sheet metal enclosures factory made DBs SPN, 4 way ,240 volts ,protection class IP-42,Concealed in wall suitable for fixing of MCBs, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.

S&F in replacement double door Sheet metal enclosures factory made DBs 4 way TPN, 415 volts ,protection class IP-42, suitable for fixing of MCBs, etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.

S&F in replacement MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 10KA, 'B' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement MCBs, TPN, AC, 415 volts of 63 Amps capacity 10 KA, 'B' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge .

S&F in replacement MCBs, SPN, AC, 240 volts of 63 Amps capacity 10 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fix in replacemnt industrial type switch socket for Geysers with 20 Amp MCB etc complete all as specified and directed by Engineer-in-Charge

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLS stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 4 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit.

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLS stranded copper conductor cable 2.5 Sqmm with 2.5 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn through and including PVC casing caping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 2.5 Sqmm cable i.e for one run for phase, one run for neutral with one run of 2.5 Sqmm cable for earth and one run of PVC casing caping shall be measured as one unit

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts & washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using granded stone aggregate and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC, both way, lifting arrangement complete including all necessary earth work etc complete all as specified and directed by Engineer-in-Charge

S&F for plastic body exhaust fan, AC single phase, 240 V of size 200 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

Supply and fix exhaust fan,steel body AC Single phase,230 V of size 300 mm sweep with ,blades frame and louvers etc complete all as specified and directed by Engineer-in-Charge

M&L for Supply, laying, connecting, testing and commissioning and jointing, LT underground cable in replacement,1100 volts grade, XLPE insulated, armored with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp complete all as specified and as directed by the Engineer-in-Charge of following Sizes :-

(a) LT cable 10 Sqmm, 2 core.

(b) LT cable25 Sqmm, 3.5 core. Note for Ser item No 181 & 182 : Excavation & earthwork, pipe protection etx shall be measured and paid seprately under relevent items of this BOQ.

Supply & lay DWC pipe 50 mm bore for laying of LT cable complete with all accessores etc complete all as specified and directed by Engineer-in-Charge

Cutting to existing CI/GI pipe line upto 80 /50/25 mm dia for taking connection up to 25 mm dia GI pipe including insertion of CI /GITee complete all as specified and directed including Exc & earth Work

S&F 20 mm Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

Supply and fix gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for for 20 mm bore.

Arihant Construction (BID ID -3374287)

Priyadeep Construction (BID ID -3374446)

MATOSHREE CONSTRUCTION (BID ID -3373026)

Ms. M.D. Auty (BID ID -3374020)

DHANANJAY BABAN KALANE (BID ID -3373010)

Neha Enterprises (BID ID -3374788)