ADDN/ALTN/IMP TO VALEDICTORY HALL OF 12 TS, SPECIAL REPAIRS/MAINTENANCE OF AIRFIELD LIGHTING, WORK SERVICES FOR RENOVATION OF TWO ROOM AT FTW AND PROVIN OF RWH AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Amount

Demoliton of cement concrete not exe 15cm thickness in ground/1st floors including floor tile complete including removal of debries to a distance exe. 150 m and cot exe. 200 all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and remove the debris out of MOD land complete all as directed.

M&L for Demolition of Brickwork or stone/ boulder masonry, built in cement mortar, manholes including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

Excavation in trenches exceeding 1.5M in depth and getting out in hard/ dense soil including cutting of roots/ branches below ground level where ever required complete all as directed.

Excavation overareas in trenches n.exceeding 1.5M in depth and getting out in hard/ dense soil complete all as directed.

ditto- all as per item above but depth exceeding 1.5 m and n.exc 3 mtr

ditto- all as per item above but depth exceeding 3 m and n.exc 4.5 m

ditto- all as per item above but depth exceeding 4.5 m and n.exc 6 m

S&F mild steel plates(chequered or plain) 8mm thick or over in thickness FE-410W(Gde E-250)quality A including cutting,welding,drilling etc complete all as specified and as directed.

M&L for PCC 1:2:4 type B1(using 20mm graded stone aggregate) as in coping splash stones including necessary form work complete all as spcified and directed.

M&L for PCC 1:4:8 type D2(using 40mm graded stone aggregate) as in foundation filling and mass concrete etc., complete all as specified and directed.

Material and labour PCC 1:3:6 type C2 (using 40mm graded stone aggregate) to filling sides of GI raceway to make fair finish to the sides of the raceway all as directed completed all as specified and as directed

Material and labour precast cement concrete block masonry 1:3:6 type C1 (using 20mm graded stone aggregate) with solid blocks exceeding 10 cm in width having minimum compressive strenght of 50 kg/cm2 as per IS 2184 (Pt-I) 2005 and set in CM 1:6 etc., complete all as specified and as directed

M&L for two coats of synthetic enamil paint over a coat of red oxide zinc chrome on new surfaces of any description complete all as specified.

M&L Vitrified light shade coloured Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L Vitrified light shade coloured Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in dado set and jointed in neat cement slurry including 10 mm thick cement mortar 1:4 backing coat complete all as specified.

M&L 15 mm thick screed bed or bedding layer of CM 1:6, for laying floor tile all as specified and directed.

Material and labour non skid colour ceramic tiles of 7 to 8 mm thick (square/rectangular) area of each the cxceeding 0.11 sqm but not exceeding 0.18 sqm of approved 1st quality in floors etc. set and jointed in neat cement slurry and pointed with white

M&L Rendering 10 mm thick in cm 1:4 for dado / skirting on brick massonry surface finished fair and even for receiving tiles in vertical surfaces all as specified and directed.

M &L Glazed Ceramic tiles coloured, of size 300mm x 450mm x 6 to 7mm thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles all as specified and directed.

M &L 25 mm thick PCC (1:2:4 ) type B0 using 12.50 mm graded stone aggregate as in floor finished even and smooth complete all as specified and directed.

S&Fsolid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement fixing at site on PVC frame as per specifications and drawing all as specified and directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed

M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hanging from roof slab including S&F hangers 6mm dia GI(up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastners 12.5mm dia.40mm long including providing and fixing Gypsum board 12mm thick in ceiling fixed with screws as per manufactures instructions including two coats of oil bound distemper complete all as specified and directed.complete all as specified.complete all as specified and as directed by Engineer- In- Charge

Taking down chowkats or frames exc. 1.5 Sq mtr and n.exc 4 Sqm each with shutters without taking off shutters from the frames complete all as specified and as directed by the Engineer-in-Charge

S&F wooden acoustic door,door frame made out of good quality hard wood,section size 100mmx65mm fitted with D type rubber gasket,with 55mm thick door shutter made from superior quality ply and wooden batten,processed with environmentally,friendly adhesive with advanced technology.The composite is ganerally made of 12mm/4mm thick commercial/BWP ply board at both side and 45mm thick noice absorbing and dampening mateiral filled in between both the ply acoustic material having a high physical,mechanical,chemical properties and stability and 3mm sheet rubber interlayer and finished 01mm mica laminate shall be bonded with 12mm thick non combustions board on both face of shutter by using high strength cross linked PVAC based adhesive.The core of door shutter shall be filled with resin bonded glass wool conforming to IS 8193/relevant standard.Two bulb type EPDM rubber gasket of size 20mmx20mm shall be fixed at the bottom edge of door shutter to control noise leakage from gap.The door assembly shall be fixed to the door frame with heavy duty hardware with SS hinge size 4"x3"x 3mm,1200mm SS door handle 02 Nos(Double leaf door) and ss tower bolt (02 Nos) complete all as specified and directed. Make : Envirotech systems or equivalent

Supply and fix solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 30 mm thick factory made PVC rigid frame panel door shutter made from MS tubular frame of gauge 19 x 19 mm style and 15 mm x 15 mm top and bottom rails MS frame to be covered with 5 mm thick heat moulded PVC 'C' channel of size 50mm x 30mm for stiles with 5mm thick PVC sheet (50 mm wide for top rail, 75 mm wide for lock rail and bottom rail on either side). Paneling of 5 mm thick PVC sheet to be fitted in the MS frame, sealed to the styles and rails with 25 mm thick PVC sheet beading on either side and joined together with cement solvent adhesive complete all as specified and as directed by the Engineer-in-Charge

S&F 2nd class hard wood for plain, solid staight chowkhats and frames,wrought,framed,rebated on the solid,rounded or chamfered,put together with glue pinned at joints

Material and labour brick work with fly ash bricks straight or curved on plan exceeding 6 M mean radius built in CM 1:4 etc complete.

Taking down cement plaster on brick or stone etc including racking out joints, hacking for key, scrubbing down with water etc complete and removed debris ouside MD land.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 is to be finished even and smooth (with out using extra cement) complete all as directed

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 is to be finished even and smooth (with out using extra cement) for ceilings complete all as directed

M&L Rendering 10 mm thick on fair faces wall of brick work or concrete surfaces in CM 1:4 finished even and smooth (with out using extra cement) complete all as directed

M&L for 15 mm thick rendering in CM (1:4) on external surfaces of brick or concrete surfaces finished even and smooth without using extra cement using integral water proofing compound as manufactures instructionnall as specified directed. Note: Integral water proofing compound shall be measured and paid seperately under relevant item

Supply only integral water proofing compound

Complete removal of existing treatment from walls including scrapping and removing the entire scales of existing treatment complete all as directed.

M&L 2 mm thick wall care putty on wall surfaces finished even and smooth all as directed.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete all as specifeid and as directed.

M&L for two coats of distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50 gms/Ltr,of approved manufacturer,of required shade and colour complete,as per manufacturer's specification complete all as specified and as directed

M&L preparation of old plastered surface and applying two coats of distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50 gms/Ltr,of approved manufacturer,of required shade and colour complete,as per manufacturer's specification over a coat of chalk whitening complete all as specified and as directed

M&Lfor complete removal of existing treatment on walls and finishing walls with two coats of premium acrylic smooth exterior paint with silicone additives of required shade @ 1.43 Ltr/10Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10Sqm) using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measures including removing of nails,making good holes,cracks,washing floors, cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed by the Engr-in-Charge.

M&L preparation of newly plastered surfaces of walls and finishing walls with two coats of premium acrylic smooth exterior paint with silicone additives of required shade @ 1.43 Ltr/10Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10Sqm) using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measures including removing of nails,making good holes,cracks,washing floors, cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed by the Engr-in-Charge.

M&L preparation of old distempered and painted surfaces of ceiling including cornices and applying one coat of oil bound distemper, white or tinted including removing of nails,making good holes,cracks,washing floors, cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy upto ht (8.0mtr) all as specified & directed by the Engr-in-Charge.

S&F 25 mm dia powder coated alumimium curtain rods and taking down old pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F powder coated aluminium curtain brackets fancy type all as specified and directed.

Supply and fix 200 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge

Supply and fix alluminium alloy, anodized sliding door bolts 250 mm long with hasp and staple (bolt type) with fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, ISI marked and fixed complete all as specified and as directed by the Engineer-in-Charge

Supply and fix mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 100 mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed by the Engineer-in-Charge

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed

S&F in repair counter top wash hand basin oval shaped 550x430x195mm complete all as specified and directed. Make: Parryware Cat No ; C0466(SP) or equivalent

S&F in repair Vitreous china urinal,white size 380x400x590mm including spreader complete all as specified. Make : Parryware Cat No :C0583(Combo set) or equivalent

S&F in Vitreous china urinal partition white of size 310x700mm complete all as specified

S&F 32mm Dia PVC waste pipe for sinks or wash basines etc,. in repairs complete all as directed by the Engr-in-Charge.

Supply and fix 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed in repairs complete all as directed by the Engr-in-Charge.

S&F Bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm dia and fixed

S&F in repair 15 mm bore piller cocks tall fancy type,cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts. Make : Parryware Cat No G3102A1GF or equivalent

S&F angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair.(15mm bore).

Supply and fix 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends all as in repairs specified and directed.

Supply and fix vitreous china wash down water closet pan (Pedestal type), Indo- western white including removing the existing one complete and making good all connections as in repairs all as specified and directed.

Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed.

S&F white /black plastic seat cover solid confirming to ISI any type complete all as specified and directed.

S&F Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed in repairs all as specified and directed.

S&F in repair sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) and fixed in repairs all as specified and directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) and fixed in repairs all as specified and directed.

S&F brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe. Make : Parryware Cat No 19941A1 or equivalent

S&F for 15mm dia Two way bib cock CP fancy type fixed to GI pipe complete all as specified and as direted by Engr-in-charge. Make: Parryware Cat No G3167A1 or equivalent

S&F CP soap dispenser Make : Parryware Cat No T6706A1 or equivalent

S&F Right paper holder Make : Parryware Cat No T6708A1 or equivalent

S & F 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including all connection and dismantling existing old water tank all as specified and directed.

S&F in repairs 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe all as specified and directed.

Taking up or down steel tubing and connections 15mm bore of pipe, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down steel tubing and connections 20mm bore of pipe, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed.

All as per item above but 20mm dia

Cutting grooves in brick/stone wall up to 75mm wide and 65mm deep and making good after fixing water tubes with CM 1:3 complete all as specified and directed.

Cutting openings or grooves through stone/Brick walls built in cement mortar and making good with CM 1:3 or cutting out defective masonry for underpinning including providing, fixing & removing, shoring, cleaning & stacking bricks & removing surplus to store & rubbish out of MOD land complete all as specified.

Providing and fixing powder coated aluminium(minimum thickness of powder coating 50 micron) work for doors,windows,ventilators and partitions(fixed portions)with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285 fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions,i.e. at top,bottom and sides with required EPDM rubber/neoprene gasket etc.Alunimium sections shall be smooth,rust free,straight,mitred and jointed mechanically whereever required including cleat angle,Aluminium snap beading for glazing/paneling,CP brass/stainless steel screws,all as specified and directed by Engr in Charge.

Providing and fixing powder coated aluminium(minimum thickness of powder coating 50 micron) work for shutters of doors,windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings whrereever required including the cost of EPDM rubber/neoprene gasket required(fittings shall be paid for separately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fastners of required dia and size,including necessary filling up the gaps at junctions,i.e. at top,bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminium section shall be smooth,rust free,straight,mitred and jointed mechanically wherever required including cleat angle,aluminium snap beading for glazing/panelling,CP brass/stainless steel screws all as specified and directed by Engr In Charge.

S&F 5.5mm thick plain sheet glass glazing any size with rubber packing where ever required complete all as specified.

M&L for 12mm thick prelaminated particle board,interior grade,prelaminated both sides with decorative choice laminations fixed with any sections complete all as specified and directed.

M&L for reinforced cement concrete type B-1,1:2:4 (using 20mm graded aggregate) as in slabs supported on walls complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings and similar work; not exceeding 200mm thick(Horizontal or sloping) complete all as specified and directed.

Formwork to sides and slabs complete all as specified and directed

S&F Mild steel TMT bars 10 mm dia and over., cut to length, bent to shape requiredincl crencking bendding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

S&F Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape requiredincl crencking bendding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

M & L 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) or on brick work laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing and cutting oval shape for fixing oval shape wash hand basin complete all as specified and directed

S &F 75 mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 all as specified and directed.

Demolition/Dismantling of drain pipes any type at any position complete all as specified and directed.

S &F 75mm bore PVC(SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed.

S &F 110mm bore PVC(SWR) Pipes sinle socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed.

S &F 75mm bore PVC(SWR) bend all as specified and directed.

S &F110mm bore PVC(SWR) bend all as specified and directed.

S &F Harrison rails, mild steel, chromium plated with SS decorative fancy brackets, stops, rollers etc., all as specified and directed.

Removing excavated material soil exc 1.5 k m and n.exc 5 km depositing where directed at a level n.exc 1.5 m above the starting point

M&L for reinforced concrete pipes class NP3 150 mm size laid and jointed complete with collars etc., all as specified and directed.

M&L loose filling with aggregate of gauge 80 to 150 mm size stone boulders etc., complete all as specified and directed.

M&L loose filling with aggregate of gauge 40 mm size stone boulders etc., complete all as specified and directed.

M&L loose filling with aggregate of gauge 20 mm size stone boulders etc., complete all as specified and directed.

M&L course sand spreading and levelling in layers n.exc 25 cm thick etc., complete all as specified and directed.

Disconnecting the electric supply, dismantling and takingdown the distribution board any type alongwith all inner components like MCBs/ Isolators of any capacity and making good the disturbed surfaces

Supply and fix MCB distribution board single door type, SPN 12 way, 240 Volts sheet steel powder painted IP 43 protection with bus bar, neutral link & earth bar etc. for incoming RCBO and outgoing MCBs

Supply and fixing MCB SPN Ç'curve 240/415 volts ISI marked tested at CPRI breaking capacity of 10 KA , 63 Amps capacity, complete all as specified and directed.Make - L&T/Legrand/ABB or equivalent.

Supply and fixing of MCB, SP, 'C' curve, 6 - 32 Amps, 10 kA ISI marked suitable for 240 volts operation complete with connection, testing and commissioning all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and taking credit and making good disturbed surfaces of walls, floors, etc.

M&L for point wiring with 1.5 sq.mm FRLS insulated multistranded copper conductor ,1100 volts grade single core PVC insulated and unsheathed cable drawn through existing/New concealed PVC conduit all as per site requirement including FRLS,PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor as per proper colour coding and pressed steel terminal boxes made out of 1.6 mm thick MS sheet box, 60mm deep covered with 3mm thick laminated hylam sheet fixed with cadmium plated screws for mounting switches,sockets,fan regulator, etc including making good the disturbed surfaces of walls and paint tuch up to match with the existing surfaces as per site requirement complete all as specified and directed by Engineer-in-Charge. Note :-Making good the disturbed surface and matching with the existing surface with the help of distempering and other items. Rate of the cost of making goods deemed to be included in the unit quoted rate.

a) One light /bell /Exhaust fan/Fan Point controlled by one switch

b) One 3 pin 6 Amps socket point controlled by one switch on same board

c) One 3 pin 6 Amps socket point controlled by one switch on independent board

All as per ser item here-in-before but for one 15/16 Amps switch socket combination on independent board with 2.5 sqmm cables for phase and neutral and 2.5 sqmm cable green in colour as earth continuity conductor.

S&F for Modular switch 1 way 5/6 amps 1 module

S&F for Socket modular type, 6A-2/3 pin combined 2 module.

S&F for Modular fan regulator step up type 12 W-2 module

Supply and fix Ceiling rose, 3 terminal, PVC/ polycarbonate insulated body

S&F for modular switch 1 way 16 amps , 1 module complete.

S&F for modular socket 6A/16A/2/3 pin combined 2 module complete.

S&F modular metal flush box 3 module

ditto- but 6 module

S&F modular white cover plate with frame 3 module

ditto-but 6 module.

Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps.

Supply & fixing high efficacy 2X2 recess/surface mounted softline luminaire suitable for armstrong/grid ceiling with high brightness LEDs and PMMA extrured diffuser giving glare free light and good aesthetic appeal 42 W LED 5700K (2 ft X2ft) complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size complete including taking down old U/s fittings all as specified and directed by Engineer-in-Charge.Make ;- Havells cat Part No VENUSNEOHE2X2R18-42WLED857MODUGR<19 or equivalent Philips/CG

Supply & fixing high efficacy 1X1 surface mounted softline luminaire suitable for armstrong/grid ceiling with high brightness LEDs and PMMA extrured diffuser giving glare free light and good aesthetic appeal 18 W LED 5700K (1 ft X1 ft) complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size complete including taking down old U/s fittings all as specified and directed by Engineer-in-Charge. Make ;- Havells cat Part NoPLUTOSURFA CE1X1PLS15WLED840S or equivalent Philips/CG

Supply & fixing wall mounted LED batten fittings with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver for 22W/20W/18W LED (4ft) complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge. Make:-Havells cat Part No LUMILINE+BS20WLED830SPCSS / Philips/CG.

Taking down ceiling fan, sealing cable end, dismantling blades and shifting to AGE E/M store and Painting of ceiling fans complete with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and writing MES No and Hanging/refixing in its original position and connecting up including provision of cable from ceiling rose to connector of fan complete all as specified and directed by Engr-In-Charge.

Taking down exhaust fan, sealing cable end dismantling louvers and shifted to AGE E/M store and painting of motor , louvers with synthetic enamel paint by spraying including filling cavities with filter and changing of old UNSV parts and cleaning of dust, writing MES No and refixing in its original position complete all as specified and directed.

M&L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed FRLS copper conductor, multistranded 1100 volts grade through exisitng concealed conduit of FRLS including running up to 6 sqmm copper conductor multistranded FRLS PVC insulated and unsheathed wire as earth continuity conductor along the wiring and connected to the common earth dolly complete including pulling wires of existing U/S sub main wiring and making good the disturbed surface to match with the existing all as specified and directed.

( Note :- Two run of 6 sqmm cable and one run of earth wire shall be measured and paid as 01 RM.

M&L for sub main wiring with two single core 4 sqmm PVC insulated and unsheathed FRLS copper conductor, multistranded 1100 volts grade through exisitng concealed conduit including running up to 4 sqmm copper conductor multistranded PVC insulated and unsheathed wire as earth continuity conductor along the wiring and connected to the common earth dolly complete including pulling th wires of existing U/S sub main wiring and making good the disturbed surface to match with the existing all as specified and directed. ( Note :- Two run of 4 sqmm cable and one run of earth wire shall be measured and paid as 01 RM.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth and getting out in hard/ dense soil for carefully taking out the existing cable inlcuding PCC cable covers(for re-use) and for laying of runway lighting cables Note: (i) Replacement of cables and Isolation Transformers will be under taken by AFS Hakimpet (ii) Re-laying of removed PCC cover shall be taken separately under "Laying Obly " item.

Supply and spread fine river sand in trenches for cushioning of cables complete all as specified and directed by Engineer-in-Charge.

Laying only PCC cable cover of size 300mm x 180mm x 40mm or as retrived against item no 01. (Cable covers removed under item No. 1 shall be re-used)

Returning, filling in excavated hard/dense soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed by Engineer-in-Charge.

Removing excavated hard/dense soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Cable jointing kit for 3.3 KV grade cable for straight through joint complete with jointing material and accessories suitable for single core unarmoured multi-stranded copper conductor cable of size upto 16 sqmm complete all as specified and directed by Engineer-in-Charge.

Saiansh Associates

K LAKSHMAN SINGH AND CO