REPAIR REPLACEMENT TO INTERNAL WATER SUPPLY PIPES AND FITTING SANITARY WORKS AND OTHER ALLIED WORKS AT BLDGS OF SECTOR A UNDER AGE BR II OF GE 865 EWS

Amount

Disconnecting existing tanks of capacity exceeding 250 litres but not exceeding 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and as directed.

Disconnecting existing tanks of capacity exceeding 500 litres but not exceeding 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and as directed.

Rotational moulded polyethylene water storage tank, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge.

Rotational moulded polyethylene water storage tank, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge.

Rotational moulded polyethylene water storage PUF tank, PUF insulated with 75 mm thick PUF insulation of density not less than 48Kg/Cum, inner and out white, two layers, ISI marked (cylinderical vertical/rectangular/loft type with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge.

Rotational moulded polyethylene water storage PUF tank, PUF insulated with 75 mm thick PUF insulation of density not less than 48Kg/Cum, inner and out white, two layers, ISI marked (cylinderical vertical/rectangular/loft type with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge.

S & F 20mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed, including taking up or down steel tubing / PPR pipe and connections and set aside for re-use or removal to store, complete all as per manufacture instructions and as directed by Engineer in Charge.

S & F 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed, including taking up or down steel tubing / PPR pipe and connections and set aside for re-use or removal to store, complete all as per manufacture instructions and as directed by Engineer in Charge.

S & F 32mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed, including taking up or down steel tubing / PPR pipe and connections and set aside for re-use or removal to store, complete all as per manufacture instructions and as directed by Engineer in Charge.

M&L for 15mm bore medium grade galvanished iron water tubing with all fittings and fixed complete to walls or laid in trenche, including taking up or down steel tubing / PPR pipe and connections and set aside for re-use or removal to store, scomplete all as specified.

Fixing only 15mm bore medium grade galvanished iron water tubing with all fittings and fixed complete to walls or laid in trenche, including taking up or down steel tubing / PPR pipe and connections and set aside for re-use or removal to store, scomplete all as specified.

M&L for 20mm bore medium grade galvanished iron water tubing with all fittings and fixed complete to walls or laid in trenche, including taking up or down steel tubing / PPR pipe and connections and set aside for re-use or removal to store, scomplete all as specified.

Fixing only 20mm bore medium grade galvanished iron water tubing with all fittings and fixed complete to walls or laid in trenche, including taking up or down steel tubing / PPR pipe and connections and set aside for re-use or removal to store, scomplete all as specified.

M&L for making connection of PPR distribution branch with PP-R main of 16 to 40 mm bore sizes by providing and fixing tee including cutting and making fusion joint etc. complete all as specified.

S&F in repair 25mm outer dia PPR Gate valve (Brass insert) confirming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site completely all as specified and directed by the Engr-in-Charge.

S&F in repair 20mm outer dia PPR Ball valve (Brass insert) confirming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site completely all as specified and directed by the Engr-in-Charge.

S&F PPR 25 mm bore socket in new or old position, fixed in repairs, complete all as specified and as directed.

S&F PPR 25 mm bore Tee in new or old position, fixed in repairs, complete all as specified and as directed.

S&F PPR 25 mm bore elbow/bend in new or old position, fixed in repairs, complete all as specified and as directed.

S&F PPR 25 mm bore union in new or old position, fixed in repairs, complete all as specified and as directed.

S&F PPR 15/25 mm bore FT socket in new or old position, fixed in repairs, complete all as specified and as directed.

S&F PPR 15/25 mm bore thread elbow in new or old position, fixed in repairs, complete all as specified and as directed.

S&F PPR 25 mm bore tank nipple in new or old position, fixed in repairs, complete all as specified and as directed.

M&L for 20 mm bore cutting existing steel tubing for alteration or addition (Each cut to be measured seperately), complete all as specified.

S&F PVC waste pipe 32mm bore with cup and washers complete on new or old locations, fixed in repairs, complete all as specified.

S&F Sinks stainless steel with drainage board made of 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including fixing contilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mm x 330mm x 160mm, fixed in repairs, complete all as specified and as directed.

Viterous china wash basin, white flat back size 600x 480mm including waste coupling CP 32mm dia and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP grating with holes fixed in repairs complete, all as specified and as directed by Engr-in-Charge.

Vitreous China wash down water closet pan and seat cover (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap and including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, including connection to drain pipe (or out going pipe) and to flushing pipe, antisyphonage pipe, etc. including cast iron 'P' or 'S' trap for 100mm bore of pipe, fixed in repairs complete all as specified and as directed by Engr-in-Charge.

S&F coloured plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinges, fixed in repairs complete all as specified and as directed.

10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with twin flush provision, complete, fixed in repairs all as specified and as directed by Engr-in-Charge. MAKE: Cera Model Combiflush twin flush as per Cat Part No. B1020101 (Old Cat Part No 2603) or equivalent in HINDWARE/PARRYWARE

Vitreous china water closet, 'Orissa' pattern, including lime concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap, anti syphonage pipe etc. complete fixed in repairs, incl bedding with PCC 1:2:4 type B-1 using 20 mm grade stone aggregate complete all as specified and as directed by Engr-in-Charge.

600 mm x 450 mm mirror of thickness 5/5.5mm of slected quality glass, mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete, fixed in repairs all as specified and as directed by Engr-in-Charge.

PVC connections 15 mm size with PTMT nuts of length 600 mm, fixed in repairs, complete all as specified and diected by Engr-in-charge.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive offixing supply pipe to flushing cistern, trap and waste pipe)

15mm bore bib tap, (minmum weight 350 gms), chromium plated, fancy type, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

15mm bore pillar tap cast copper alloy chromium plated screwed downhigh pressure, with or without lettered 'hot or cold' with long screwed shanks and fly-nuts screwed for iron pipe, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

Chromium plated, fancy type Stop valve/cock, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, fixed in repairs, complete all as specified.

S&F 15mm bore ball brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule, fixed in repairs, complete all as specified and as directed.

S&F Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union, suitable for 15 mm bore, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

15mm bore, Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms), fixed in repairs, complete all as specified and as directed by Engineer-in-Charge.

15mm bore, Pillar tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110 gms), fixed in repairs, complete all as specified and as directed by Engineer-in-Charge.

15mm bore, Stop valve standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-92gms), fixed in repairs, complete all as specified and as directed by Engineer-in-Charge.

S&F gun metal, globe or gate valve ISI marked cast with ironwheel head, screwed both ends for iron pipe and fixed for 20 mm dia bore, fixed in repairs, complete all as specified & directed by Engr-in-Charge.

S&F Table top basin, size 600x385x195mm, fixed in repairs, complete all as specified and as directed. Make: Code no VGS-WHT-81931N of Jaquar or equal approved in Kohler

S&F wall hung basin with fixing accessories of size 610x480x195mm, fixed in repairs, complete all as specified and as directed. Make: Code no FNS-WHT-40801 with full pedestal of FNS-WHT-40801 of Jaquar or equal approved in Kohler

S&Fsingle piece WC with UF soft close seat cover, hinges, fixing accessories set and cistern fitings of size 390x710x720, fixed in repairs, complete all as specified and as directed. Make: Cat No. VGS-WHT-81851SN of make Jaquar or equal approved in Kohler

S&F single lever basin mixer with popup waste system with 450 mm long braided hose, with accessories set, fixed in repairs, complete all as specified and as directed. Make: Cat No. FUS-29023B of make Jaquar or equal approved in Kohler

S&F Towel ring square with round flange accessories set, fixed in repairs, complete all as specified and as directed. Make: Cat No. ACN-1121N of make Jaquar or equal approved in Kohler

S&F Toilet roll holder with flap, with accessories set, fixed in repair, complete all as specified and as directed. Make: Cat No. ACN-1153S of make Jaquar or equal approved in Kohler

S&F Soap dispenser with glass bottle with accessories set (fixed in repair) , , complete all as specified and as directed. Make: Cat No. ACN-1135N of make Jaquar or equal approved in Kohler

S&F Soap dish holder with accessories set, fixed in repair, complete all as specified and as directed. Make: Cat No. ACN-1131N of make Jaquar or equal approved in Kohler

S&F Corner glass shelf (with bracket), with accessories set(fixed in repair) , Cat No. ACN-1173 of make Jaquar, complete all as specified and as directed.

S&F Hand shower (health faucet) with 1m long easy flexible tube in chrome finish & wall hook, with accessories set, fixed in repair, complete all as specified and as directed. Make: Cat No. ALD-565 of make Jaquar or equal approved in Kohler

S&F Wall mixer 3-in-1 system with provision for both hand shower and overhead shower completewtih 115mm long bend pipe connecting legs and wall flange (without hand & over head showers) fixed in repair, complete all as specified and as directed. Make: Cat No. FUS-29281 of make Jaquar or equal approved in Kohler

S&F Angular stop cock with wall flange, with accessories set, fixed in repair, complete all as specified and as directed. Make: Cat No. FUS-29053 of make Jaquar or equal approved in Kohler

S & F over head shower 150x150mm square shape single flow (ABS Body chrome plated with greay face plate)with Rubit cleaning system, fixed in repair, complete all as specified and as directed. Make: Cat No. OHS-35495 of make Jaquar or equal approved in Kohler

S & F shower arm 400x 25x25mm square shape for wall mounted showers with flange, fixed in repairs, complete all as specified and as directed. Make: Cat No. SHA-455L400 of make Jaquar or equal approved in Kohler

S &F easy flex tube in chrome finish 1.5m long with nuts, fixed in repair, complete all as specified and as directed. Make: Cat No. SHA-571 of make Jaquar or equal approved in kohler

S &F hand shower 24 dia round shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system, fixed in repair, complete all as specified and as directed. Make: Cat No. HSH-5537N of make Jaquar or equal approved in Kohler

Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed suitable for 15mm bore of pipe, fixed in repairs, complete all as specified and as directed. Make: Jaquar/Kohlar/Cera

S&F Grating doom 125mm dia of brass, chromium plated, (Minimum weight 60 gms), fixed in repairs, complete all as specified and as directed.

S&F Towel rack with lower hanger (stainless steel) with hook with accessories set, fixed in repairs, complete all as specified and as directed. Make: Cat No. ACN-1181FSH of make Jaquar or equal approved in Kohler

Kitchen plate rack made of stainless steel 1.00mm thick sheet, standard size 900x900x250mm and design as approved by GE and fixed to wall with wooden plug and screw, fixed in repair, complete all as specified and directed by Engr-in-charge. Make: Parko/GEM/Elite/Cera/Parry ware/Ess Ess

Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and Removing demolished material to a distance and depositing out site of MoD land Where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.

M & L for joint free Non-Skid coloured Ceramic tiles, first quality, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:4 for laying floor finishes, complete all as specified and directed by Engr-in-Charge.

M & L for joint free Non-Skid coloured Ceramic tiles, first quality, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:4 for laying floor finishes, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M & L glazed (coloured) ceramic tiles, first quality, of size 350 x 250 x 7mm/450 x 350 x 7mm thick, as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement as in dado, skirting etc to match with the shade of tiles including 10 mm thick rendering in Cement Mortar 1:4 on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles complete all as specified and directed.

M & L glazed (coloured) ceramic tiles, first quality, of size (300 x200mm) x 7 mm thick, as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement as in dado, skirting etc to match with the shade of tiles including 10 mm thick rendering in Cement Mortar 1:4 on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles complete all as specified and directed.

25mm thick,plain cement concrete, 1:2:4 (Nominal mix), type B-0 (using 12.5mm graded crushed stone aggreates) as in floors finished rough surface to receive floor finishes, complete all as specified and directed by Engr-in-Charge.

Horizon Construction Company

PADMA ENTERPRISES

M/S Praveen Kumar and Sons

R B TRADERS