PERIODICAL SERVICES TO OTM AND MD ACCN IN JP LINE, MH, PRO UNIT, ML LINE AND PP LINE INCL WELCOME MAINT SERVICES UNDER B/R-I AT CITY AREA, ALWAR

Amount

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with cratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed.

M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

M&L rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick/stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound ( water proof compound paid seperatly) complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of Oil bound distemper over a coat of 1 mm thick wall care putty of approved tint complete all as specified & directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of white wash complete all as specified and directed.

M&L preparation of newly plastered surface of walls & applying two coats of cement base paint over a coat of primer complete all as specified.

M&L preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified and directed.

M&L preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper (OBD) of approved shade/tint all as specified & as directed.

M&L for complete removal of existing treatment on walls and preparation of surfaces of walls and applying two coats of oil bound distemper (OBD) complete all as specified and directed.

M & L for applying two coat of OBD and including of a coat of wall care putty of minimium 1 mm thik to obtained smooth surfaces incl preparation old painted surfaces including complete removal of existing treament with help of mechanically and unapproachable or uneven area shall be removed manually including removal of splashes on glass panes and floors with water complete all as specified and directed.

Preparation of old decorated plastered/unplastered surfaces of ceilings and applying one coat of oil bound distemper (OBD) complete all as specified & as directed.

M&L preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified & as directed.

M&L complete removal of existing surface and preparation of old decorated plastered or unplastered surfaces of walls and applying two coats of cement base paint of approved shade/tint on walls complete all as specified and directed.

M&L preparation of old decorated surfaces of walls, plastered including cornices, pilasters etc and applying one coats of white wash complete all as specified and directed.

M&L complete removal of existing surface and old decorated surfaces of wall, plastered or unplastered including cornices, pilasters etc and applying two coats of white wash, complete all as specified and directed.

M&L preparation of old decorated plastered/unplastered surfaces of ceilings & applying one coats of white wash complete all as specified and directed.

M&L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L complete removal of existing treatment on walls and preparation of surfaces of walls and applying two coat Plastic emulsion paint on walls complete all as specified & directed.

M & L for complete removal of existing treatment on walls and preparation of surfaces of walls and applying two coat of exterior emulsion apex paint (exterior grade) over one coat primer over 1 mm putty on walls with help of mechanically complete all as specified & directed.

M&L writing letters or figures(Block,roman,Italic or Indian letter n.exc 30cm high) complete as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, and fixed with new ones glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified and directed.

Taking up or down steel tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc complete all as specified and directed.

Taking up or down steel tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc complete all as specified and directed.

M&L galvanised steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L galvanised steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water tanks complete as specified in SSR Part-I.

S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water tanks complete as specified in SSR Part-I.

S&F in repairs Ball valves, high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball, screwed for iron pipe 20mm dia (minimum weight 210 gms) complete all as specified and as directed.

S&F in repairs brass Gun-metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed.

S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.

S&F in repair PVC connection pipe, 15mm dia & 600mm long with adopter and washer at both end complete all as specified & directed.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete all as specified and directed.

S&F as in repairs Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified and directed.

S&F in repaier brass chromium plated shower rose 100mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460 mm with bowl size 410mm x 330mm x160 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink complete all as specified and directed.

S&F in repairs 15 mm bore bib tap, cast copper alloy, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F as in repair 15mm bore stop/angle valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F as in repair 15mm bore 2 way angle valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs Pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified including taking down existing pillar tap and removing the same to store complete all as specified and directed.

S&F in repair white vitreous china wash hand basin 'Flat back' of size 550x400mm fixed on and including new brackets CP waste coupling and PVC Waste pipe complete all as specified and directed.

S/F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rests connection to trap and to flushing pipe, etc.complete including making food to floor complete all as specified & directed.

S&F in repairs Jet spray chromium plated brass for EWC with & including PVC connection 900 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete all as specified and directed.

S&F in repairs health faucet, brass chromium plated for EWC with and including PVC connection 1m long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete all as specified and directed.

S&F in repairs Mirror cabinet PVC frame of size 400 x 500 mm fixed to wall with rawl plug & stainless steel suitable size screws complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed.

S&F in repairs vitreous china wash hand basin white of size 800mm x 475 mm with and including PVC side cabinet and floor mounted cabinet of size 240x140x975 mm and 780x440x800 mm and mirror with PVC frame of size 560x800 mm complete all as approved by Engineer-in-Charge. Make : Somany Cat Part No 10527 (Basin) & 16122 (Cabinet), 170114 (Mirror), 160121 (side cabinet) or equivalent of M/S Johnson, H & R India Ltd / M/S Hindustan sanitary ware and Industries Ltd / CERA, Hindware, Madhusudan Ceramic as approved by GE.

S&F in repairs fancy type center hole basin mixer without popup waste system but including plain waste 32 mm size with aerator complete cast copper alloy, chromium plated, scrwed downhigh pressure, with long scrwed shanks & fly nuts scrwed for iron pipes of 15 mm bore complete all as specified & as directed.

S&F in repairs brass chromium plated telephonic hand shower with 1.50m long stainless steel braided flexible tube with nut & nipple & hook suitable for wall mixer & screwed down for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs brass chromium plated Towel Rack 600mm Long with Lower Hangers Prima Collection complete all as specified & as directed.

S&Fin repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls or trenches/floor complete all as specified & directed.

S&Fin repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls or trenches/floor complete all as specified & directed.

S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) fixed with cement complete all as specified & directed.

S&F 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc including taking down existing frame work complete all as specified & directed.

S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc. including taking down existing frame work complete all as specified & directed.

S&F in repair factory made PVC shutter Cabinet of required size, fabricated by joining for 18mm thick PVC Celluca ply with prelaminated sheet on one side cut to desired size of shutter and fixed with frame as in cabinet boxes with shelf and shutter full size fitted under or above the kitchen cooking plateform incl all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc including dismantling boarding any description complete all as specified and directed. Note (i) : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the unit rates of this item. (ii) For payment purpose , area of front elevation shall be considered.

S&F 75mm extruded brass handles, fabricated type polished complete all as specified & directed.

S & F Width of flaps (when open) 40mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed.

S&F in repair for pressed steel shutter 1mm thick including pressed steel frame of 1.25 mm thick sheet, 12mm dia MS rod for locking, two Nos chromium plated handle and one Godrej pattern lock including two coat of spray painting over a shop coat of primer, complete, all as shown in Drg No. TD/2004/29 sheet No. 1/3 to 3/3

S&F in repairs brass chromium plated godrej pattern cupboard lock, vertical type, in any size with escutcheon plates & two keys fixed in preseed steel cupboards complete all as specified and directed.

Demolition of cement/lime concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete all as specified and directed.

M&L for 25 thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed.

M&L non skid ceramic tiles colored 300x300x7mm thick in floor set and jointed in neat cement slurry and pointed in white or coloure cement and over 15mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L machine cut kota stone slab flooring 18-19mm thick over 20 mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.

M&L 75 mm thick PCC(1:3:6) type C1 (using 20mm graded stone aggregate ) as in plinth protection including forming groove 10mm wide & 30mm deep & filled with bitumenious filler at intermediate span n.exc 5m without using extra cement complete all as specified & directed.

M&L for 40 mm thick PCC 1:2:4 type B -1 using 20 mm graded aggregate as in flooring complete all as specified & directed.

Dismentling floor, hearth or wall tiling incl cement mortar bedding (but ot backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified & directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering cement & sand mortar 1:4 complete all as specified and as directed.

M&L machine cut kota stone slab 18-19mm thick in steps for riser, dado, skirting, wall etc over 15 mm thick cement plaster in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.

M&L for 18/19mm thick Granite slab of approved shade, as in platform etc, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) including required cutting to suit the size of oval type wash hand basin over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

Treatement for sunken portion is as follows :- (i) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (ii) M&L for providing 12 mm dia holes of 40mm deep @2.00m c/c at junction of beams and columns as co-ordinal points for inserting/pouring cement slurry by pressure grouting for sunken floors of toilet , includind sealing the holes with CM 1:3, all as specified and as directed . (iii) M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement.(WPC will be measured and paid seperately). (iv) M&L for applyin evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces. (v) M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in filling (sunken portion). etc.

S&F in repairs powder coated stainless steel drapery rod of 25 mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C complete all as specified and directed.

Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Dismantling of tubular trusses and tubular posts, purline, rafter complete all as specified and directed.

S&F MS steel work in tubular trusses and tubular posts, purline, rafter including special shaped washers etc., complete using but welded. RHS/SHS confirming to IS 4923 : 1997 complete all as specified & directed.

M&L for Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 W (Gde E-250) Quality B, complete all as specified & directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets/AC boards, any thickness, including cover fillets and removing from site complete all as specified and directed.

M&L False ceiling with ArmGyp-FB ceiling tiles of 595 x595 (as approved by GE) fixed with and including galvanised iron powder coated inverted "T" or "L" section (concealed GI frame work) of mettalic or equivalent suspended from ceiling with provn of galvanised wire 4 mm dia and wall taping screw including butterfly clip, hold down clips for fixing the board to frame complete all as per manufacurers instructions complete all as specified and directed. (a) size of main tee 39 x 24.4 x 0.8 mm (b) size of wall angle 22.2 x 22.2 x 0.65 mm (c) size of grid 0.61 x 0.61 mm.

Taking down Chowkatts or frames with shutters ( without taking off shutters from the frame) n exc 1.5 sq.each & removing to store complete all as specified and directed.

Taking down Chowkatts or frames with shutters (without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq m each & removing to store complete all as specified and directed.

S&F 35mm thick IInd class hard wood factory made panelled door shutter(two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified & directed.

S&F 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

M&L Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified& directed.

M&L Factory made solid skelton wire gauzed moulded pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified & directed.

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

S&F Butt hinges 100mm long medium weight, colled rolled mild steel complete all as specified & directed.

S&F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed.

S&F 150mm Aluminium handles, cast type, anodised complete all as specified & directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC 1:2:4 type B-0 to match the existing floor.Fe-410 (Gde-E250 quality A) complete all as specified and directed.

M&L for Flat iron hold fast angle iron for door frame as complete all as specified and directed.

S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S&F anodized aluminium, door, window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.

S&F for powder coated of any colour as approved anodised aluminium grill of approved pattern for windows/ ventilators/doors complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F sheet glass ordinary quality,in squares n. exc. 0.5 SQM each 4.80 mm thick complete all as specified and directed.

S&F mild steel solid rubber beading of 20 to 40mm wide and 2 to 4mm thick fixing at bottom to existing doors complete all as specified and directed.

Taking down carefully anodized aluminium doors/windows/ventilators frame including glazed shutters & builder’s hardware complete of any size and any description and refixing in the same opening after carrying out necessary repair & replacement of unserviceable components / hardware to make it fully functional complete all as specified & as directed. Notes :- (i) Quoted rate shall deemed to include supply & fixing of new joining cleat, aluminium beading, glazing clips, rubber packing, stays including cutting of old styles etc & adjusting the same appropriately as directed. (ii) Glazing, new aluminium sections for frame/shutters, builder’s hardware such as handles, hinges, door closure, floor door spring shall be measured & paid for separately. (iii) Loose corner joints of frame & shutters shall be tightened by providing suitable cleats made out of aluminium angle of appropriate size fixed with nut & bolts to make the joints at 90º.

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified & directed.

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

Providing and applying plaster of paris putty of 1 mm thickness over plastered/unplastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for preparation of newly /old bituminous membrane surface and applying two coat of heat resistive paint over a coat of priming coat over APP Membrane and as per manufacturer's instruction all as specified and directed.

S & F for Pipe Supporting Clamping - Single Pipe of dia 3" (75 mm/110mm) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 10" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 3" - 2 Nos. 2. Continuous Slotted C Channel of Size 10" - 1 No.; 3. U Bolt R/M for 3" (75 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2" Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102. Make: Shaivi or equivalent as approved by GE.

S & F for Pipe Supporting Clamping - Single Pipe of dia 3/4" (20 mm) down take pipeline fixing done with Clamping System consists of Mono Bracket + U Bolt R/M system running vertically with wall distance 3": Pipe Support Clamping made of 1. Mono Bracket for 3/4" (20 mm) pipe having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 48 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs. 2. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit: 1. Mono Bracket for 3/4" pipe, Wall distance 3" - 1 Nos. 2. U Bolt R/M for 3/4" (20 mm) GI / UPVC/ CPVC pipe Dia. - 1 nos and 3. Justi Khilla 2 1/2" - 2 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing no. : CE Jaipur Zone - Jaipur; TD/2022/102. Make : Shaivi or equivalent as approved by GE.

S & F for Pipe Supporting Clamping - Single Pipe of dia 1/2" (15 mm) down take pipeline fixing done with Clamping System consists of Mono Bracket + U Bolt R/M system running vertically with wall distance 3": Pipe Support Clamping made of 1. Mono Bracket for 1/2" (15 mm) pipe having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 48 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs. 2. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit: 1. Mono Bracket for 1/2" pipe, Wall distance 3" - 1 Nos. 2. U Bolt R/M for 1/2" (15 mm) GI / UPVC / CPVC pipe Dia. - 1 nos and 3. Justi Khilla 2 1/2" - 2 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing no. : CE Jaipur Zone - Jaipur; TD/2022/102. Make : Shaivi or equivalent as approved by GE.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existing surfaces complete all as directed fixed in repairs.

Supply and fixing in repairs MS helical door spring 300mm size with roller base plate fixed to wooden or steel frames with welding etc complete all as specified and directed.

S&F in repairs door closer hydraulically regulated, designation No. 3, aluminium (Die cast) body, universal type (ISI marked), fixed in repairs, complete all as specified & as directed.

Material and labour water proof/weather proof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the new plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3) Allow 6-8 hrs time to dry the putty surface.

Material and labour for two coats of smooth interior acrylic emulsion with rich matt finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltrs(unndiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint after complete removal of existing surface/plastered surfaces as per manufacturer instructions complete all as directed at any height incuding necessary scaffolding. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application).

shiva construction (BID ID -3457779)

vandana enterprises (BID ID -3457743)