NIT No 28 (2025-26)Item No 01 (Re-invited)

(Mechanical Work) PUMPS

Supply, installation, testing and commissioning of Electric Motor Driven Horizontal Split Casing Pump of Capacity 750 m3/hr at 40 mwc, 150 KW including drive motor and accessories such as mechanical seal, coupling, guard base frame, foundation bolts, etc as per technical specifications. (2W + 2S) Make-M&P / KBL / Jyoti / KSB / LUBI/DJB approved Make

Supply, installation, testing and commissioning of 3HP dewatering/ drain pump (Submersible NC Pump Set) of 15 mwchead including drive motor and accessories such as control panel, pipes etc. (1W + 1S) Make- KBL / Jyoti / KSB / LUBI/DJB approved Make

Supply, installation, testing and commissioning of 5HP dewatering/ drain pump (Submersible NC Pump Set) of 15 mwchead including drive motor and accessories such as control panel, pipes etc. (1W + 1S)Make- KBL / Jyoti / KSB / LUBI/DJB approved Make

Supply of 3HPSubmersible dewatering pump set with 15 meters head along with motors to suit pumps, control panel with cable and 50 meters of 50 mm dia heavy duty hose pipe complete as per technical specifications & site requirements. Make- KBL / Jyoti / KSB / LUBI/DJB approved Make

SUCTION PIPE LINE

Supply, installation, testing and commissioning of complete pipes and specials complete with fittings , gasket, S S- 304 bolts and nuts with washers etc as per technical specification and requirements at site. a) DI bell mouth 500 mm

b) DI,DF 500 mm Ø vertical pipe piece

c) DI,DF 90° Bend,500 mm Ø

d) DI,DF 500 mm Ø puddle pipe

e) DI,DF 500 mm Ø gap piece

f) DI,DF Dismantling Joint 500 mm Ø

g) MS,D/F eccentric taper / reducer with one face of 500mm dia and other face to suit the flange of suction side of the pump

Supply, installation, testing and commissioning of DI sluice valves as per IS 14846 and technical specifications and requirement at site a) 500 mm Ø Double flanged Sluice Valve ( Manual) Make- KBL / IVC / VAG / Dorot/DJB approved Make

DELIVERY LINE

Supply, installation, testing and commissioning of complete pipes and specials complete with fittings , gasket, bolts and nuts with washers etc as per layout plan, technical specification and requirements. a) MS,D/F concentric taper / reducer with one face of 400mm dia and other face to suit the flange of discharge side of the pump

b) MS,D/F gap piece 400mm dia

c) MS, 400 mm Ø pipe

d) 400 mm Ø MS Flange

Supply, installation, testing and commissioning of swing type DI check valves(NRV) as per technical specifications and IS 5312. a)DI,DF 400 mm Ø Make- KBL / IVC / VAG / Dorot/DJB approved Make

Supply, installation, testing and commissioning DI dismantling joint, double-flanged, with a maximum longitudinal adjustment of ±25 mm (or as specified). The joint shall be suitable for potable water applications. It shall include all necessary components for a complete assembly. a) 400 mm Ø Dismantling Joint

Supply, installation, testing and commissioning of DI sluice valves as per IS 14846 and technical specifications and requirement. A) 400 mm Ø Double flanged Sluice Valve Make- KBL / IVC / VAG / Dorot/DJB approved Make

COMMON MANIFOLD (OUTGOING PIPELINE)

Supply, installation, testing and commissioning of complete pipes and specials complete with fittings , gasket, bolts and nuts with washers etc as per layout plan, technical specification and requirements. A) MS common manifold 600 mm Ø

B) 600mm dia MS Flange

c) 600mm dia MS Blind Flange

D) 600 mm × 600 mm × 400 mm MS, AF Tee

E) 90° MS Bend D/F, 600 mm Ø

Supply, installation, testing and commissioning DI Double Flanged reflux valves (non-return valves) A) 600 mm Ø NRV Make- KBL / IVC / VAG / Dorot/DJB approved Make

Supply, installation, testing and commissioning of DI sluice valves as per IS 14846 and technical specifications and requirement at site. A) 600 mm Ø Double flanged Sluice Valve Make- KBL / IVC / VAG / Dorot/DJB approved Make

Ductile Iron (DI) dismantling joint, double-flanged, with a maximum longitudinal adjustment of ±25 mm (or as specified). The joint shall be suitable for potable water applications and manufactured from Ductile Iron conforming to EN 1563. It shall include all necessary components for a complete assembly A) 600 mm Ø Dismantling Joint

Providing and supplying DI Temper proof Kinetic Double Orifice type Air Valves as per standard specifications. A) 150 mm Ø double orifice type Air Valve Make- KBL / IVC / VAG / Dorot/DJB approved Make

PUMPING STATION ACCESSORIES

Ventilation System - Exhaust Fan 450mm (SOR 20.2.3)

E.O.T CRANE A) Supply, installation, testing and commissioning of double girder 5T electrically operated travelling crane with span of 7.0 mtrs including all accessories as per IS 807, IS 3177 and technical specification & requirements. Make- Hercules (India) / Wh. Bready /AVON / REVA /DJB approved Make

Supply, installation Chequered Plates of 8 mm at cable trenches including supports, lifting arrangement and paintings etc.

Portable extinguishers with glow signs indicating location of extinguishers A) CO2 type @ 4.5 kg as per IS : 15683- 2006

B) Heavy duty leek proof fire bucket as per IS: 2546/1974

C) Fire bucket stand for six buckets

D) First Aid Box.

Supply, installation, testing and commissioning of complete pipes and specials complete with fittings , gasket, bolts and nuts with washers etc. A) 200 mm Ø MS pipe (Overflow Pipeline)

Supply, installation, testing and commissioning of motorized Sluice Gates as per IS: 13349-1992 (Class II) and technical specifications & requirements A) 1000 × 1000 mm

Supply, installation, testing and commissioning of DI sluice valves as per IS 14846 and technical specifications and requirement. A) Approx. 400 mm Ø Double flanged Sluice Valve (For Incoming Line of Tube Wells) Make- Hercules (India) / Wh. Bready /AVON / REVA /DJB approved Make

Electrical work

Lightning Protection A) Supplying, fixing & commissioning vertical air terminating fixtures with spikes mounted on 25mm dia GI pipe of at least 3000mm length with base plate, bonding of earth strips etc.

Supply & laying of 25x3 mm GI Strip as ring conductor & down conductor

Providing test links with enclosure

40mm dia, 3m long G.I. pipe Earth pits complete as per IS 3043 (Ordinary type)

Identification plate of earthing pit with associated work

Earthing System

Pipe earthing A) Providing and fixing GI pipe earth Pit as per IS-3043 with 40mm dia GI pipe of 3 mtr. long filled with alternative layers of salt and charcoal and providing manhole for watering with funnel, CI cover etc

Plate earthing A) Providing and fixing 600 x 600 x 3.0mm Cu Plate earth Pit as per IS-3043 Transformer neutral.

Supplying, fixing and terminating following GI strips with PVC sleeves and wires in trenches below the ground including providing sand cushioning, brick protection etc. or laying on surface with GI clamps, bolts and nuts etc. A) 40 x 10 mm GI strip

B) 25 x 3 mm GI strip

C) 8 SWG GI wire (for machine/equipment/external lighting earthing)

Supplying and fixing following dia.hume pipe for crossing the cables under the roads and paved areas. 150 MM dia.

Cable Tray

Supplying, Unloading, cable tray of GI perforated cable tray including grouting / anchor fastener supports from wall/ceiling etc. joints, reducer, Tees etc. complete in all respect. 300x62.5x2mm (SOR 34.6.8)

Supplying, Unloading, GI cable tray cover for the following sizes of cable tray. 300x25x2mm

Supplying, unloading, hot dip galvanized ladder type cable tray with 60mm collar including grouting / anchor fastener supports from wall/ceiling etc., including joints, reducer, Tees etc complete in all respect. Cable tray shall be given a rigorous anti-corrosive treatment before applying two coats of red oxide and one coat of finish colour paint in the following sizes 300x62.5x2mm (SOR 34.6.8)

11kV HT Switchgear

Supply, installation, testing & Commissioning of HT Panel comprising of 2 incomers, 2 outgoings & 1 bus coupler feeders each rated 630A, 350 MVA with indications, metering and protection. Scope includes steel supports for installation of switchboard danger board & associated civil works. Make- ABB / Kirloskar Systems / BHEL / Jyoti / Siemens / Crompton/DJB approved Make

Main LT panel

Supply, installation, testing & Commissioning of Main LT Panel having 1000A ACB 2 incomers, 1 bus coupler complete with metering and protection & outgoing feeders as follow :- 1. 400 A MCCB power feeder for VFD-150 kW -4 Nos. and 1 no. as spare 2. 32A MCCB with DOL Starters for 2.2kw-3 nos& one no. as spare 3. 32A MCCB with DOL Starters for 3.7kw-2nos & one no. as spare 4. 100 A MCCB power feeder for PDBs-3 Nos. and 1 no. as spare 5. 250A MCCB Power feeder for 2 nos. APFC panel and one no. as spare. with all indications, metering and protection. Scope includes steel supports for installation of switchboard danger board & associated civil works. Make-L&T / Siemens / ABB / C&S / Schneider / DJB approved

Supply, installation, testing & Commissioning of PDBs suitable for surface/ recessed mounting, comprising of one incomer & outgoing feeders with indications, metering and protection. Scope includes steel supports for installation of switchboard danger board & associated civil works. All the insert used in Panel must be of DJB approved makes and should be ISI marked A) Power distribution board-1 having 1x100A MCCB Incomer 1x63Afor HTP,1x63A for Battery Charger,1x63 for welding receptacles ,1x63A for AC and 1x63 A as spare.

B) Power distribution board-2 having 1x100A MCCB Incomer 1x63Afor EOT,10x63A for actuators and Motorized Gates and1x63 A as spare

C) Power distribution board-3 having 1x100A MCCBV Incomer, 2x63A for for LDBs, 1x63A for Street Lighting DBv and 1x63 A as spare

Supply, delivery, erection, testing and commissioning 415V, LDB for indoor lighting with 32A FP RCB as Incomer and 24 Nos. SP 16A MCB as outgoing(All the insert used in Panel must be of DJB approved makes and should be ISI marked

Supply, delivery, erection, testing and commissioning 415V, LDB for street Lighting DB having 63A MCB as Incomer with synchronous timer and 6 Nos. 4P 16A MCB as outgoing(All the insert used in Panel must be of DJB approved makes and should be ISI marked

LV Bus Duct 415 V, 1000A Al. Bus Ducts 2 nos. each length of 10 meter

LV VFD 415V, VFD for 150kW Induction motor(Make-L&T / Schneider / Siemens / ABB / DJB approved Make)

Transformer 500 KVA, 11/0.433 KV, OIL Type , Dyn11, +5% to -5% @ 2.5%, Off Circuit Tap Changing(Make-KEC / Crompton / BBL / BHEL / ABB / Siemens/ DJB approved Make)

Cables

Supplying, storing, laying 11kV/ 1.1kV grade XLPE insulated aluminum/ copper conductor armored cable on exiting cable tray in trenches or directly buried in ground(Make- Fort Gloster / ICL / CCI /ICC / Universal / Grandlay/DJB Approved Make) A) 3Cx300sqmm, AL 11kV cable

B) 3.5Cx300sqmm AL 415volt ,1.1kV

C) 3.5Cx300sqmm AL 415volt ,1.1kV

D) 4Cx16 sqmm , AL 415volt , 1.1kV

E) 4Cx10 sqmm , Al 415volt , 1.1kV

F) 4Cx4 sqmm , Al 415volt , 1.1kV

G) 3Cx2.5 sq.mm, CU ,1.1 Kv

h) 5Cx 1.5 sqmm , CU , .1 kV

I) 5Cx 2.5 sqmm , CU . 1.1 Kv

Cable termination kit (Gland Termination )

Supplying all the materials, cutting, peeling terminating and connecting cable with11kV/ 1.1kV grade brass double compression cable gland and crimped aluminium/ copper lugs in respective DBs switches etc. a) 3Cx300sqmm, AL 11kV cable

b) 3.5Cx300sqmm AL 415volt ,1.1kV

c) 4Cx16 sqmm AL 415volt ,1.1kV

d) 4Cx10 sqmm , AL 415volt , 1.1kV

e) 4Cx4 sqmm , CU 415volt , 1.1kV

f) 3Cx4 sqmm , CU 415volt , 1.1kV

g) 3Cx 2.5 sqmm

h) 5Cx 2.5 sqmm

i) 5Cx 1.5 sqmm

Lighting

Supplying, Unloading, storing the following fixtures including cost of hangers, chains, lamps, control gear, fixing, arrangement etc. as required including flexible wire from outlet to fitting. A) 12 W LED (Make- Philips / Bajaj / Crompton / Havells/DJB APPROVED)

b) 36 W LED tube(Make- Philips / Bajaj / Crompton / Havells/DJB APPROVED)

c)1x70watt street lighting fixture with 70 W lamp including cast aluminum control gear box etc. complete in all respect. (Make- Philips / Bajaj / Crompton / Havells/DJB APPROVED)

External Lighting Poles:- Supplying, unloading, storing of outdoor lighting pole with control MCB and connected accessories as required including painting etc. (Rate shall include cost of pole, weather proof junction box, GI pipe for incoming and outgoing cable etc.) Pole shall be as per IS: 2713 (Part-II) 1980. 7.5 meter long hot dip galvanized steel Octagonal pole with single arm with all accessories stated above

Supplying 1200mm dia sweep ceiling fan with standard down rod, regulator and other accessories as required

Oscillating type wall fan 400mm dia. and other accessories as required Make:- Almonard or DJB approved.

Supplying and fixing following piano type switch/ socket on the switch box/ cover including connections etc. as required a) 32A Sockets

b) 5/6 amps switch

c) 15/16 amp switch

Wiring for lighting point/fan point/exhaust fan point/call bell point/light plug & power plug point including conduit/ accessories, circuit wiring, sub-main wiring, switch baord, switches except switch/socket/box for light plug/power plug points

APFC Panel 415V, APFC panel of 120 KVAR without reactor, Configuration of APFC Panel. (Make- Siemens / L&T / BHEL /Crompton/DJB APPROVED)

Static Capacitor for Transformer 415V, Fixed Static Capacitor for Transformer of 40KVAR without reactor

DC battery, charger & distribution board Supplying, assembling, installation, commissioning of Sealed maintenance free (SMF) NiCd 30V D.C., 100AH, Battery,Float & Boost Battery Charger & DB along with all accessories, racks and other accessories as described in technical specification

Emergency Stop Switch Supply, Erection, testing and commissioning of STAR/STOP type push button in wall / channel mounted type as per site requirement with necessary accessories including all labour and materials, as per specification of this tender and directions of Engineer-in-Charge

Safety procedures for electrical equipment.

2m x 1m, 3mm thick Electrical insulating mats comprising of IS 15652: 2006

Shock Treatment Chart

Caution and Danger Board

Hand Gloves tested for 11kV

Miscellaneous items

1.5T, 5 star rated split Air conditioners

PC with printer and all accessories

INSTRUMENTION WORKS

RTU Panel having with DI-32,DO-16, AI-8, AO-4 with Modbus TCP/IP, HMI Touch Panel 7” dimension, 4 Port Ethernet Switch unmanaged switch, Ethernet Cable Cat-6 cable for internal wiring within panel, 1 kVA with 120 minutes backup

Ultrasonic type level measuring system/ Level Transmitter

Level Indicator

Pressure measuring system / Pressure Transmitter

Pressure gauges along with accessories / Pressure Indicator . (Dial Size 150mm)

Full bore Electromagnetic @ 500 mm (make-ABB / Forbes Marshall / Siemens / E&H / KENT/DJB approved)

Instrumentation signal, control, power & communication cables along with cable trays, lugs, glands, conduits, steel supports, clamps etc.

OPAX Works Supply, Installation, Testing and Commissioning of Mechanical, Electrical & Instrumentation Equipment for 8.4 ML UGR and Pumping Station at Nilothi. Operation and Maintenance for 2 years (i/c 2 Years DLP)

Engagement of Staff operation & maintenance & watch and ward of BPS/Pumping station. (1st Year) 1. Supervisor-1 Nos. (General Shift) 2.Skilled Electrician– 1 Nos. (General Shift) 3.Skilled Fitter– 1Nos. (General Shift) 4. Operator (skilled)-1 Nos. (3 Shift)-3 nos. 5.Unskilled (Beldar) – 2 Nos. (3 Shift)-6 nos.

Engagement of Staff operation & maintenance & watch and ward of BPS/Pumping station. (2nd Year) 1. Supervisor-1 Nos. (General Shift) 2.Skilled Electrician– 1 Nos. (General Shift) 3.Skilled Fitter– 1Nos. (General Shift) 4. Operator (skilled)-1 Nos. (3 Shift)-3 nos. 5.Unskilled (Beldar) – 2 Nos. (3 Shift)-6 nos.