REPAIR AND MAINT OF ROOFING FLOORING INTERNAL WATER SUPPLY WOODEN AND STEEL JOINERY AND OTHER MISC WORKS AT TATTOO GROUND UNDER GE 970 EWS

Amount

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' or 'J' type or crancked hook bolts and washers in roofs, walls etc in patches complete all as specified and directed.

All as per item No 02 but except sheeting (any thickness) complete all as specified and directed.

Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.

All as per item No 5 but except sheeting (any thickness) complete all as specified and directed by engineer in charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying one coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel surface of any description exc. 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of PCC ground floor and paving n.exc 15cm thickness unreinforced (below or above ground level) all as specified and directed

M&L 25 mm thick cement concrete type B-1 1:2:4 (using 20 mm graded stone aggragate) in sub base complete all as specified and as directed

M&L for Non skid ceramic coloured tiles jointless, 7-8 mm thick (area exc 0.11 Sqm but not exc 0.18 Sqm) laid in floors with neat cement slurry including poinintg in white cement with pigment to match the shade of tiles incl and over 15mm thick screed bed or beding layer in cement mortor 1:6 incl dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish of the premisescomplete all as specified and directed.

M&L Non-Skid ceramic coloured tiles 7 to 8 mm thick (square/reactangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, in floor finishes set and joineted in neat cement slurry and pointed in white or colured cement to match shade of tiles incl and over 15mm thick screed bed or beding layer in cement mortor 1:6 incl dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish of the premisescomplete all as specified and directed. complete all as specified.

M&L for Glazed ceramic coloured tiles 450X350X7mm thick as on vertical surfaces over and including 10mm thick rendering of cement mortar (1:4) including poinintg in white cement with pigment to match the shade of tiles incl dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish of the premises complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and precast concrete articles complete all as specified & directed.

M & L Brick work with sub class 'B' bricks straight or curved on plain exceeding 6 meteres mean radius in cement mortor 1:6 complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L 10 mm thick cement plaster on fair faces of brick or stone masonary surface in cement mortor 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coat of cement based paint over a coat of alkali resistant primer complete all as specified and directed.

Preparation of old decorated plastered surfaces of walls and applying two coat of cement base paint complete all as specified and directed.

M&L 15 mm thick cement plaster on other than fair faces of brick or stone masonary surface in cement mortor 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening complete all as specified and as directed.

Preparation of old decorated surfaces of wall and applying one coat of oil bound distemper (oil emulsion) white or tinted complete all as specified and as directed.

Preparation of old decorated surfaces of wall and applying two coats of oil bound distemper complete all as specified and as directed.

Preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.

M&L for rendering cement plaster 5 mm thick in cement mortar 1:3 on fair faces of concrete in ceiling, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered or un-plastered surfaces of ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparing old plastered or un-plastered surfaces and applying two coats of white wash on ceiling surfaces complete all as specified and directed.

Preparation of old wooden or wooden based surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M & L for applying wall care putty on wall 3 mm thick complete all as specified and directed.

M& L for applying two coat of Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as specified and directed.

Taking down shutters of any description exceeding 1 sqm but n exc 2.00 sqm each complete all as specified and directed.

Taking down shutters of any description n exc 1.00 Sqm complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed.

S&F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, cut or mitred beads for screwing glass etc. Sizes of members of shutters as specified in SSR Part - I, Section 8, Clause 8.20(b) complete all as specified and directed.

S&F factory made 2nd class hardwood, 30mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S& F Galvanished MS wire cloth 0.56mm nominal dia or wire and average width of aperture 1.18 fixed with tinned tacks or galvanished wire staples complete all as specified and directed.

S& F in repair Galvanished MS wire cloth 0.56mm nominal dia or wire and average width of aperture 1.18 fixed with tinned tacks or galvanished wire staples complete all as specified and directed.

Hacking out old broken glass ( any thickness , size, quality or description) from wooden frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, all as specified

S&F 4mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, all as specified

S&F factory made solid PVC door Frame of size 50 mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed

S&F Factory made solid panel PVC door shutter 28 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed

S&F 150 mm long aluminium bow handles cast type anodised complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply & fix 300 mm long aluminum anodized sliding door bolt, plate type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Mild Steel 300mm, ordinary rat tail rod pattern springs,incl roller and roller plate complete all as specified and directed.

S&F butt hinges med weight cold rolled MS, size 100 mm complete all as specified and directed.

S&F in repair 25mm curtain rod stainless steel fancy type with finale cap 2 Nos stainless steel bracket including fixing arrangement in walls etc complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

M&L Machine cut kota stone slab 18-20mm thick over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and incl 15mm thick screed bed or beding layer in cement mortor 1:6 in floors etc. complete all as specified and directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 15mm complete all as specified and directed.

S&F galvanised mild steel water tubes,15 mm bore with all fittings, 'medium grade', ISI marked, galvanised, fixed to walls and ceiling or laid in floors complete all as specified.

Refixing and cleaning 15mm bore old serviceable steel tubing and connections in new or old position (Walls, ceiling, floors etc) complete all as specified and directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore20 mm complete all as specified.

S&F galvanised mild steel water tubes,20mm bore with all fittings, 'medium grade', ISI marked, galvanised, fixed to walls and ceiling or laid in floors complete all as specified.

Refixing and cleaning 20mm bore old serviceable steel tubing and connections in new or old position (Walls, ceiling, floors etc) complete all as specified and directed.

S&F rotational moulded polythylene water storage tank 500 Ltr capacity cylindrical vertical with closed top, hoisted and fixed in position all as specified in SSR Pt-I including dismantling unsv water tanks exc 250 ltr but not exc 500 ltrs complete all as specified and directed.

S&F rotational moulded polythylene water storage tank 1000 Ltr capacity cylindrical vertical with closed top, hoisted and fixed in position all as specified in SSR Pt-I including dismantling unsv water tanks exc 500 ltr but not exc 1000 ltrs complete all as specified and directed.

Supply & fix in repairs ball valve brass high pressure with polythene float and fly nut complete screwed for 20mm bore dia of iron pipe or brass ferrule complete all as specified and directed.

S&F in repair Vitreous china squatting pan 'Orissa' pattern ' size 580x440mm white, with integral foot rests (excluding fiushing cistern and flush pipe ) including connection to trap, anti syphonage pipe, etc complete all as specified and directed.

S&F in repair vitreous China wash basin, white, flat back of size 550 x 400 mm including, waste pipe, brackets grouted in cement mortar 1:2 in wall complete all as specified and directed.

Supply and fix in repairs PVC valveless, symphonic action type, flushing cistern low level, white with inlet ball valve, float valve and handle including brackets 10 ltrs capacity complete all as specified and directed.

Supply and fix in repair waste pipe of polyethylene of low and high density of PVC 32 mm for basin/sink complete all as specified and directed.

Supply and fix in repair PVC connection with brass ferrules, 60 cm long for wash basins and flush tanks complete all as specified and directed.

Supply and fix in repair 15mm bore bib tap, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fix in repair 15mm bore pillar tap, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe, fancy type chromium plated, 15 mm size fixed complete all as specified and directed.

M&L in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement, diameter of outlet 75mm complete all as specified and directed.

Supply and fix in repair tubular towel rail brass chromium plated 600mm long fixed with chromium plated screw and PVC cleat etc complete all as specified and directed.

Supply & fix in repairs toilet paper holder vitreous china coloured, box type fixed to walls with chromium plated brass screws complete all as specified and directed.

Material & labour for granite (of any type) work, 18 to 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good including 15mm thick in cement mortar (1:4) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite 6) and demolition of old stone slab complete all as specified and directed.

S&F powder coted Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing and including all fitting etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed.

M&L for ACP board for aluminium frame for partition and door complete all as specified and directed.

M&L in repair for Framed work of Fe 410-W (Gde E- 250) quality A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Supply & fixing in repair sinks with drainage board made of stainless steel 1mm thick (kitchen or laboratory) with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including PTMT waste coupling & waste pipe as suitable complete all as specified and directed .

Material & labour for 60 mm thick non skid pre polished coloured interlocking paver block made with electro vibro technology with rubber/ PVC moulded of any shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment complete all as specified and directed.

Dismantling wall and ceiling boards fibre, pulp insulation etcor insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

M&L in repair 4 mm Asbestos cement plain building boards, fixed to /GI/Aluminium framework with screws complete all as specified

M&L 4 mm thick Veneered plywood, grade 1 (with BWR resin) with decorative face veneers on only one face fixed with nails to timber frame work as in wall and ceiling complete all as specified.

S&F 2nd class HW plain fillets, sectional area exceeding 6 and not exceeding 13 sqcm, square, rectangular or triangular in section, clean sawn, secured with nails complete all as specified and directed.

Providing & Fixing in position suspended false celling system using Anodised aluminium snap grid frame work for false ceiling with size of Grid shall be 605X605mm incl 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

M&L for Second class hard-wood in scantlings, clean sawn, timber fixed, incl dismantling scantling 40 Sqcm and above complete all as specified and directed

M&L for Lagging to 15mm GI pipes used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed with puff insulation chicken wire mesh wire netting 25 gauge, 20mm mesh complete all as specified and directed.

M&L for Lagging to 20mm GI pipes used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed with puff insulation chicken wire mesh wire netting 25 gauge, 20mm mesh complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1, using 20mm graded stone aggregate , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs including weathering, slightly rounded or chamfered angles and throating, incl demolition of old PCC complete all as specified and directed.

S&F for 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or floor incl dismantling of cast iron or reinforced concrete, PVC(SWR) pipes, joinetd in cement mortar and taking out from trenches complete all as specified and directed.

S&F for 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or floor incl dismantling of cast iron or reinforced concrete, PVC(SWR) pipes, joinetd in cement mortar and taking out from trenches complete all as specified and directed.

75 mm bore PVC (SWR) bends (any radius ) complete all as specified and directed.

110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair for Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs for Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Cleaning of manholes not exceeding 1.5m in depth and by pumping or manually or by any means and the sludge/sludge water is to be disposed off in covered containers to a distance exc 2 Kms outside the periphery of defence land including taking off and refixing manhole covers complete all as specified and directed.

Opening /Cleaning and making operational the blocked water closet (Indian/orrisa or English type)at any floor including cleaning of traps and CI drain pipe (any type and any position)from WC's/trap to manhole Cleaning and well flushing,pressure pumping , taking out all residues etc and removing the same to distance not exceeding 1000m, burried the same underground in low laying area and covering the same with earth including removal of surplus soil to a distance not exc 500m. complete all as specified and directed. Note:-The complaint has to be rectified within defined time as given in complaint slip failing which penalty will be imposed as Rs100/-

FIRDOUS AHMAD BABA

M/S BHAT AND CO

M/S SMYLE AND CO

Javeed And Co

M/S LATIF AHMAD BABA CONSTRUCTION