Development and Improvement of Market - Goubert Market (2.9 acres) at Puducherry

ABSTRACT OF COST

Estimated Cost including

SI No. Description

1 Civil Works 50,06,81,720.00

2 Water Supply and Plumbing Works 54,38,808.00

3 Fire Fighting Arrangements 1,45,03,496.00

4 Three Seater Sitting 12,60,240.00

6 Ice Factory Machine 67,67,300.00

7 Electrical Works 5,35,64,253.93

Total Amonut including GST = 58,27,30,297.93

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06 14:40:52

NAME OF THE PROJECT: DEVELOPMENT AND IMPROVEMENT OF GOUBERT MARKET(2.4 ACRES) AT PUDUCHERRY

BILL OF QUANTITITES

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Earth work excavation above water level and depositing on bank in sandy silt or

other soil, wet sand or silt, light black cotton soil or clay, sandy loam & ordinary soil

for I.C's man hole, well, infiltration, suction well including driving shoring materials

etc. for excavation purpose and removing the shoring materials and refilling the

trenches with excavated earth complying with standard specification., complete -

For first depth of 2 metres (using close timbering).

Earth work excavation above water level and depositing on bank in sandy silt or

other soil, wet sand or silt, light black cotton soil or clay, sandy loam & ordinary soil

for I.C's man hole, well, infiltration,suction well including driving shoring materials

etc. for excavation purpose and removing the shoring materials and refilling the

trenches with excavated earth complying with standard specification., complete -

For Second depth of 2 metres (using close timbering).

Earth work excavation above water level and depositing on bank in sandy silt or

other soil, wet sand or silt, light black cotton soil or clay, sandy loam & ordinary soil

for I.C's man hole, well, infiltration, suction well including driving shoring materials

etc. for excavation purpose and removing the shoring materials and refilling the

trenches with excavated earth complying with standard specification., complete -

For Second depth of 2 metres (using close timbering).

Dismantling old plaster or skirting raking out joints and cleaning the surface for

plaster including disposal of rubbish to the dumping ground within 50 metres lead

Earth work in excavation by mechanical means (Hydraulic excavator) / manual

means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on

5 2.8.1 plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including Cum 1,663.72 161.59 2,68,838.90

getting out the excavated soil and disposal of surplus excavated soil as directed,

within a lead of 50 m for all kinds of soil

As per Item 1 with Extra for every additional lift of 1.5 m or part thereof in

excavation / banking excavated or stacked materials. All Kinds Of Soil

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

C Fourth Depth (4.50 to 6.0m) Cum 12.59 392.93 4,945.39

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

7 2.25 foundations etc. in layers not exceeding 20cm in depth, consolidating Each Cum 17,040.83 143.28 24,41,534.43

deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying chemical emulsion in sealed containers including delivery as specified .

Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for POST - CONSTRUCTIONAL anti-termite

treatment (excluding the cost of chemical emulsion) - tratment of soil under existing

9 2.35.3.1 flooors using chemical emulsion @ one litre per hole, 300mm apart including drilling Sqm 6,070.55 191.58 11,63,024.17

12mm diametre holes and plugging with cement mortar 1:2 (1 cement : 2 coarse

sand) to match the existing floor - with Chlorpyriphos / lindane E.C. 20% with 1%

concentration -

Supplying and filling with gravel (excluding rock) in layers not exceeding 20cm in

depth , breaking clods , watering , rolling each layer with 1/2 tonne roller , or

10 2.27C.1 wooden or steel rammers and rolling every 3rd and top-most layer with power roller Cum 190.00 753.89 1,43,239.14

of minimum 8 tonnes capacity including all leads and lift (Payment will be made

based on level measurement)

Supplying and filling with gravel (excluding rock) in trenches , plinth, sides of

11 2.27A.1 foundations etc . In layers not exceeding 20 cm in depth consolidating each Cum 1,619.66 747.16 12,10,154.78

deposited layers by ramming and watering etc .complete including all lead and lift

Approved Supplying and filling in plinth with M sand under floors, including watering,

Rate ramming, consolidating and dressing complete.

Supplying , filling , spreading & leveling stone boulders of size rage 5 cm to 20

cm,inrecharge pit, in the required thickness, for all leads & lifts , all complete

Supplying, filling, spreading and levelling gravels of size range 5 mm to 10 mm , in

14 24.6 the recharge pit, over the existing layer of boulders , in required thickness for all Cum 18.90 780.4166 14,749.87

leads and lifts , all complete

Gravel packing in tubewell construction in accordance with IS :4097, including

15 24.8 providing gravel fine / medium / coarse, in required grading and sizes as per Cum 7.10 811.5568 5,762.05

actual requirement , of all complete

Supplying , filling , spreading & leveling Brick aggregate (single size):40mm

16 145(0287) nominal size ,inrecharge pit, in the required thickness, for all leads & lifts , all Cum 11.80 449.58 5,305.04

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying , filling , spreading & leveling Stone aggregate (single size):20mm

17 152(0295) nominal size ,inrecharge pit, in the required thickness, for all leads & lifts , all Cum 0.80 1056.10 844.88

Providing and laying sand gravel mix 1:1 of 150mm consolidated thickness using

0.68cum of sand & 0.62cum of gravel for 1cum finished to a soaked CBR value of

minimum 20 including cost and conveyance of sand and gravel to the work site and

stacking to the standard departmental gauge for premeaurement, mixing the

18 4.2D.MO required quantities of sand and gravel, spreading watering and consolidation the Cum 555.93 2,133.09 11,85,846.50

mix by power roller rolling to achive the required proctor density including the

labour charges for mixing, spreading, hire and fuel charges for power roller and all

other tools and plants employed etc., complete. As per clause no 401 of MOT

Providing and laying 60mm thick factory made cement concrete interlocking paver

block of M-30 grade made by block making machine with strong vibratory

19 16.68 compaction and of approved size and design / shape laid in required colour and Sqm 1,784.00 724.10 12,91,785.84

pattern over and including 50mm thick compacted bed of course sand , filling the

joints with coarse sand etc. all complte

Providing and laying in position cement concrete of specified grade excluding the

20 4.1.8 cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 Cum 1,592.38 4,907.68 78,14,887.38

coarse sand) : 8 graded stone aggregate 40 mm nominal size)

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded

stone aggregate 20 mm nominal size derived from natural sources

Providing and laying in position cement concrete of specified grade excluding the

22 4.1.2 cost of centering and shuttering - all work upto plith level - 1:1.5:3 (1 cement : 1.5 Cum 5.00 6,853.05 34,265.25

coarse sand : 3 graded stone aggregate 20mm nominal size)

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying & laying of drainage composite for use behind walls, between two

different fills, alongside drains of road, below concrete lining of canals etc. having

thermobonding a draining core - HDPE geonet comprises of two sets of parallel

overlayed ribs integrally connected to have a rhomboidal shape with a polyethylene

film and a nonwoven geotextile having mass per unit area 130 gsm and tensile

23 27.17 strength of 8.0 kN/m that will be working as separation or protecting layer, Sqm 6,935.33 850.00 58,95,039.16

geocomposite having in plane flow capacity of 0.7 L / (m.s) at hydraulic gradient of

1.0 & 20 kPa pressure and tensile strength of 13.5 kN/m , with mass per unit area

of 830 gsm, at easily accessible location including top and bottom, with all leads

and lifts, manpower and machinery, materials, labour etc. complete and as

directed by Engineer - In - Charge.

Centering and shuttering including strutting, propping etc. and removal of form for

Centering and shuttering including strutting , propping etc and removal of form for -

foundations, footings, bases of columns etc for mass concrete

Centering and shuttering including strutting , propping etc and removal of form for -

Lintels , beams , plinth beams , girders , bressumers and catilevers

Centering and shuttering including strutting , propping etc and removal of form for -

Columns , Pillars , Piers , Abutments , Posts and Struts

Centering and shuttering including strutting , propping etc and removal of form for -

Suspended floors , roofs , landings , balconies and access platform

Centering and shuttering including strutting , propping etc and removal of form for -

Stairs , (excluding landings) except spiral -staircases

Centering and shuttering including strutting , propping etc and removal of form for -

f 5.9.2 Walls (any thickness ) including attached pilasters , butteresses , plinth and string Sqm 3,849.83 553.62 21,31,345.97

Extra for additional height in centering , shuttering where ever required width

adequate bracing , propping etc. including cost of de - shuttering and decentering

25 5.11.1 at all levels , over a height of 3.5m, for every additional height of 1metre or part Sqm 18,347.18 233.63 42,86,417.56

thereof (plan area to be measured) - Suspended floors, roofs, landing , beams

and balconies (Plan area to be measured)

Reinforced Cement Concrete in substructure complete as per drawing and

26 13.5E.1.1 technical specification -RCC Grade M20 with a minimumcement content 347 kg / cum 391.63 7,855.77 30,76,573.83

cum up to 5m height -Using concrete mixer

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Providing , hoisting and fixing upto floor five level precast reinforced cement

concrete in lintels, beams, and bressumers including setting in cement mortar 1:3 (1

27 5.15 cement : 3 coarse sand) , cost of required centering and shuttering but excluding cum 25.69 9,740.61 2,50,216.66

the cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size)

Providing , hoisting and fixing upto floor five level precast reinforced cement

concrete in shelves including setting in cement mortar 1:3 (1 cement : 3 coarse

28 5.16 sand) , cost of required centering , shuttering and finishing with neat cement cum 9.41 14,463.01 1,36,141.76

punning on exposed surfaces but excluding the cost of reinforcement , with 1:2:4

(1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size)

Providing and laying in position machine batched and machine mixed design mix M-

25 grade cement concrete for reinforced cement concrete work , using cement

content as per approved design mix , including pumping of concrete to site of laying

but excluding the cost of centering , shuttering , finishing and reinforcement ,

29 5.33.1 including admixtures in recommended proportions as per IS : 9103 to accelerate, cum 5,257.00 7,515.60 3,95,09,527.10

retard setting of concrete , improve workability without impairing strength and

durability . Note:- Cement content considered in this item is @ 330 kg / cum. Excess

or less cement used as per design mix is payable or recoverable separately. - All

work upto plinth level

Providing and laying in position machine batched and machine mixed design mix M-

25 grade cement concrete for reinforced cement concrete work , using cement

content as per approved design mix , including pumping of concrete to site of laying

but excluding the cost of centering , shuttering , finishing and reinforcement ,

30 5.33.2 including admixtures in recommended proportions as per IS : 9103 to accelerate, Cum 4,020.70 8,426.45 3,38,80,211.36

retard setting of concrete , improve workability without impairing strength and

durability . Note:- Cement content considered in this item is @ 330 kg / cum. Excess

or less cement used as per design mix is payable or recoverable separately. - All

work above plinth level upto floor V level

Extra for providing richer mixes at all floor levels - Note:- Excess / less cement over

31 5.34.1 the specified cement content used is payable / recoverable separately - Providing M- Cum 5,608.36 96.58 5,41,672.57

30 grade concrete instead of M-25 grade BMC / RMC . (Note:- cement content

considered in M-30 is @ 340 kg / cum)

32 5.22.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending ,

placing in position and binding all complete upto plinth level - Thermo -Mechanically Kg 10,56,863.13 94.13 9,94,81,046.59

treated bars (TISCON / VIZAG / JINDAL / SAIL / JSW) Fe - 415 or more

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

33 5.22A.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending ,

placing in position and binding all complete above plinth level - Thermo - Kg 7,51,255.90 94.13 7,07,14,665.96

Mechanically treated bars (TISCON / VIZAG/JINDAL / SAIL / JSW) Fe - 415 or more

Providing anticorrosive treatment to HYSD reinforcement with fusion bonded epoxy

coating the rate includes cost of anticorrosive coating including cost of powder ,

sand blasting, cleaning , induction , heating , depreciation of machinery etc,

wastage in cut length of bars , provision of wooden battens between rows of coated

bars , cover to work bush pins / bar bending machines etc - for bars of 20mm to 32

mm diametre - conforming to IS 13620 -1993

Providing anticorrosive treatment to HYSD reinforcement with fusion bonded epoxy

coating the rate includes cost of anticorrosive coating including cost of powder ,

sand blasting, cleaning , induction , heating , depreciation of machinery etc,

wastage in cut length of bars , provision of wooden battens between rows of coated

bars , cover to work bush pins / bar bending machines etc - for bars of 8mm to 16

mm diametre - conforming to IS 13620 -1993

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation

3.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Supplying and applying bituminous solution primer on roof and / or wall surface at

0.24 litre per sqm.

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1

cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Providing and laying autoclaved aerated cement blocks masonry with

150mm/200mm/230mm/300mm thick AAC blocks in super structure above plinth

39 6.47 level up to floor V level with RCC band at sill level and lintel level with approved Cum 3,459.30 8,208.01 2,83,93,980.39

block laying polymer modified adhesive mortar all complete .(The payment of RCC

band and reinforcement shall be made for seperately).

Provding and laying autoclaved aerated cement blocks masonry with 100mm thick

AAC blocks in superstructure above plinth level upto floor five level in cement

mortar 1:4 (1 cement : 4 coarse sand) . The rate includes providing and placing in

position 2 nos 6 mm dia M.S.bars at every third course of masonry work.

Brick work 7 cm thick common burnt clay F.P.S. (non modular) brick of class

41 6.8 designation 3.5 in cement mortar 1:3 (1cement : 3 coarse sand ) in superstructure sqm 47.00 785.15 36,901.97

above plinth level and upto floor five level

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Providing and fixing double glazed hermetically sealed glazing in aluminium

windows, ventilators and partition etc. with 6 mm thick clear float glass both side,

42 21.10 having 12 mm air gap, including providing EPDM gasket, perforated aluminium sqm 193.00 3,535.36 6,82,324.98

spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per

specifications, drawings and direction of Engineer-in-charge complete.

Providing and applying integral crystalline slurry of hydrophilic in nature for

waterproofing treatment to the RCC structures like retaining walls of the basement,

water tanks , roof slabs, podiums , reservior , sewage & water treatment plant ,

tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5

part integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts

integral crystalline slurry : 1 part water) for horizontal surfaces and applying the

same from negative (internal) side with the help of synthetic fiber brush. The

material shall meet the requirements as specified in ACI-212-3R-2010 i.e by

reducing permeability of concrete by more than 90% compared with control

concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative

side. The crystalline slurry shall be capable of self-healing of cracks up to a width of

0.50 mm. The work shall be carried out all complete as per specification . The

product performance shall carry guarantee for 10 years against any leakage - For

Vertical surfcae two coats @ 0.70 kg per sqm

43 13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand) sqm 21,540.16 180.67 38,91,656.45

44 13.8.3 12 mm cement plaster of mix 1:5 (1 cement : 5 fine sand) sqm 43,995.45 218.45 96,10,955.07

12mm cement plaster finished with a floating coat of neat cement of mix - 1:3 (1

cement :3 fine sand)

Extra for plastering done on moulding cornices or architraves including neat finish to

line and level - in one coat

Extra for plastering done on moulding cornices or architraves including neat finish

to line and level - in two coat

48 13.37.1 White washing with lime to give an even shade for New work Sqm 19,544.16 21.54 4,20,883.49

Providing and applying plaster of paris putty of 2 mm thickness over plastered

surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic washable distember (ready mixed) of approved

50 13.42.1 manufacutrer , of required shade and colour complete as per manufacturer 's Sqm 140.00 78.07 10,929.63

specification - Two or more coats on new work

Applying one coat of water thinnable cement primer of approved brand and

manufacture on wall surface : Water thinnable cement primer

Wall painting with plastic emulsion paint Royal of approved brand and manufacture

to give an even shade - two or more coats on new work

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Finishing walls with textured exterior paint of required shade - New work (Two or

53 13.45.1 more coats applied @ 3.28 ltr / 10 sqm ) over and including priming coat of exterior Sqm 13,154.65 190.83 25,10,297.30

primer applied @ 2.20 kg / 10 sqm

Supplying and fixing rolling shutters of approved make, made of required size

M.S.laths, interlocked together through their entire length and jointed together at

the end by end locks , mounted on specially designed pipe shaft with brackets, side

guides and arrangements for inside and outside locking with push and pull

operation complete, including the cost of providing and fixing necessary 27.5 cm

long wire springs manufactured from high tensile steel wire of adequate strength

conforming to ISS :4454 -part 1 and M.S.top cover of required thickness for rolling

shutters - 80 x 1.20mm M.S.laths with 1.25 mm thick top cover

55 10.7 Providing and fixing ball bearing for rolling shutters. Each 442.00 397.54 1,75,713.56

Providing wood work in frames of doors , windows, clerestory windows and other

56 9.1.2V frames , wrought framed and fixed in position with hold fast lugs or with dash cum 4.12 1,57,991.51 6,51,162.01

fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

separately) -vengai wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows,

and clerestory windows, including ISI marked M.S.pressed butt hinges bright

57 9.5.2.1V finished of required size with necessary screws, excluding panelling which will be Sqm 94.62 5,235.68 4,95,400.38

paid for separately , all complete - Kiln seasoned and chemically treated Vengai

wood - 35 mm thick shutters

Providing and fixing bright finished brass butt hinges with necessary screws etc

complete - 125 X 85 X 5.5 mm (heavy type)

Providing and fixing bright finished brass butt hinges with necessary screws etc

complete - 100 X 85 X 5.5 mm (heavy type)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary

screws etc complete - 200 x 10 mm

Providing and fixing bright finished brass door latch with necessary screws etc

complete - 300 x 16 x 5 mm

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6

62 9.76 levers and a pair of lever handles of approved quality with necessary screws etc. Each 63.00 1,305.53 82,248.29

Providing and fixing bright finished brass hanging type floor door stopper with

necessary screws, etc. complete.

Providing and fixing aluminium extruded section body tubular type universal

hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body,

door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with

double speed adjustment with necessary accessories and screws etc. complete.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Providing and fixing bright finished brass handles with screws etc complete - 125

Providing and fixing factory made uPVC white colour casement /casement cum fixed

glazed windows comprising of uPVC multi-chambered frame , sash and

mullion(where ever required) extruded profiles duly reinforced with 1.60 + or - 0.2

mm thick galvanized mild steel section made from roll forming process of required

length (shape & size according to uPVC profile), uPVC extruded glazing beads of

appropriate dimension , EPDM gasket , stainless steel (SS 304 grade) friction hinges

, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size

for fixing frame to finished wall , plastic packers , plastic caps and necessary

66 9.147A.3 stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion Sqm 265.50 8,877.68 23,57,024.78

welded at all corners, mullion (if required) shall be also fusion welded including

drilling of holes for fixing hardware's and drainage of water etc. After fixing frame

the gap between frame and adjacent finished wall shall be filled with weather proof

silicon sealent over backer rod of required size and of approved quality , all

complete as per approved drawing.(Single / double glass panes and silicon sealent

shall be paid separately) - Casement window double panels with top fixed with S.S.

friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm , sash

47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 + or - 0.2mm

and single glazing bead of appropriate dimension . (Area of window upto 2.50 sqm)

Providing and fixing factory made uPVC white colour fixed glazed windows/

ventilators comprising of uPVC multi-chambered frame and mullion (where ever

required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized

mild steel section made from roll forming process of required length (shape & size

according to uPVC profile), , uPVC extruded glazing beads of appropriate

dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished

wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of

frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall

be also fusion welded including drilling of holes for fixing hardware's and drainage

of water etc. After fixing frame the gap between frame and adjacent finished wall

shall be filled with weather proof silicon sealant over backer rod of required size and

of approved quality, all complete as per approved drawing & direction of Engineer-

in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) -

Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x

68 mm both having wall thickness of 1.9 + or -0.2 mm and single glazing bead of

appropriate dimension. (Area upto 0.75 sqm) Fixed window size - 1.20x0.50 m

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall

thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at

corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square

68 9.119 tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square Rm 575.70 462.67 2,66,356.93

tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the

frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size,

complete as per manufacturer’s specification and direction of Engineerin-Charge.

Providing and fixing factory made panel PVC door shutter consisting of frame

made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles

and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers

of approved make and manufacture. M.S. frame covered with 5 mm thick heat

moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm

shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming

styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and

69 9.120.1 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail Sqm 184.41 2,943.33 5,42,780.04

and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be

tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided

both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be

provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side

PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7

mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beadingon inner side, and joined

together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20

Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be

specified by the manufacturer), of commercial quality conforming to IS : 15622, of

approved make (Bell / Johnson / Regency / Somany / Naveen / Asian) in colours

such as white, Ivory, Grey, Fume red brown ,laid on 20mm thick cement mortar 1:4

(1 cement : 4 coarse sand), including pointing the joints with white cement and

matching pigment etc., complete

Providing and laying water proofing treatment in sunken portion of WCs, bathroom

etc., by applying cement slurry mixed with water proofing cement compound

consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed

with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed

71 22.5 to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed Sqm 473.00 406.92 1,92,474.58

with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed

to air cure for 4 hours followed with water curing for 48 hours.The rate includes

preparation of surface, treatment and sealing of all joints, corners, junctions of

pipes and masonry with polymer mixed slurry.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

40 mm thick marble chips flooring rubbed and polished to granolithic finish, under

layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate 12.5 mm nominal size) and top layer 6mm thick with white, black,

72 11.9.6 chocolate, grey, yellow or greenmarble chips of sizes from 1 mm to 4 mm nominal Sqm 4,838.00 709.03 34,30,270.69

size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight

in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume,

including cement slurry etc. complete :Ordinary cement without any pigment

Providing and laying vitrified floor tiles of size 600 x600 mm (thickeness to be

specified by the manufacturer) with water absorption less than 0.08% and

73 11.41.2 conforming to IS: 15622 of approved make , in all colours and shades, laid on 20 Sqm 7,703.00 1,278.99 98,52,061.51

mm thick cement mortar 1:4 (1 cement : 4 coarse sand) , including grouting the

joints with white cement and matching pigments etc., complete - size of

Providing and laying flamed finish granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all complete as per

the architectural drawings with 18mm thick stone slab over 20mm (average) thick

74 8.12 base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement Sqm 8,878.81 2,538.10 2,25,35,278.23

slurry and pointing with white cement slurry admixed with pigment of matching

shade including rubbing, curing and polishing etc. all complete as specified and as -

flamed finish granite stone slab Jet black , Cherry red, Elite brown, Cat eye or

75 11.24 equivalent

Extra for pre finished nosing to treads of steps of granite slabs. RM 1,444.00 452.42 6,53,299.97

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622

(thickness to be specified by the manufacturer) , of approved make (Jhonson /

Asian / Somany / Nitco) in all colours , shades of size 300 x 450 mm as approved in

76 11.36 skirting , risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 Sqm 1,551.60 1,072.94 16,64,771.53

cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm,

including pointing in white cement with pigment of matching shade complete - size

Providing and fixing partition upto ceiling height consisting of G.I. frame with

toughend glass and required board, including providing and fixing of frame work

made of special section power pressed/ roll form G.I. sheet with zinc coating of 120

gms/sqm of 75 mm overall thickness partition with 12.5 mm thick double skin fire

rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3

(Board with BIS certification marks)

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or

78 13.48.2 more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 Sqm 340.40 115.25 39,231.30

ltr/10 sqm of approved brand and manufacture

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or

79 13.48.3 more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 Sqm 6,568.80 115.05 7,55,740.44

ltr/ 10 sqm of approved brand and manufacture.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with

80 9.48.1 M.S. flats, square or round bars etc. including priming coat with approved steel Kg 5,284.00 153.72 8,12,249.08

primer all complete. Fixed to steel windows by welding .

Lime concrete terracing on roofs of required thickness laid to fall with 25mm

81 12.20L nominal size brick aggregate and 50% lime mortar 1:2 (1 lime putty : 2 surkhi) Cum 3,292.00 6,415.83 2,11,20,896.56

rammed and finished with gur and belgiri treatment complete including rounding of

junctions with Parapet wall complete

Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal

thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4

82 12.20 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of Sqm 4,920.00 655.93 32,27,158.87

20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat

Providing and applying integral crystalline slurry of hydrophilic in nature for

waterproofing treatment to the RCC structures like retaining walls of the basement,

water tanks , roof slabs, podiums , reservior , sewage & water treatment plant ,

tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5

part integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts

integral crystalline slurry : 1 part water) for horizontal surfaces and applying the

same from negative (internal) side with the help of synthetic fiber brush. The

material shall meet the requirements as specified in ACI-212-3R-2010 i.e by

reducing permeability of concrete by more than 90% compared with control

concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative

side. The crystalline slurry shall be capable of self-healing of cracks up to a width of

0.50 mm. The work shall be carried out all complete as per specification . The

product performance shall carry guarantee for 10 years against any leakage - For

Vertical surfcae two coats @ 0.70 kg per sqm

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Providing and laying water proofing treatment on roofs of slabs by applying cement

slurry mixed with water proofing cement compound consisting of applying: (a) after

surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with

water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre

glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should

not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of

cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670

kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4

hours followed by water curing for 48 hours. The entire treatment will be taken upto

30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and

final layer of brick tiling with cement mortar (which will be paid for separately. For

the purpose of measurement the entire treated surface will be measured.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless

steel dash fasteners , stainless steel bolts etc., of required size, on the top of the

floor or the side of waist slab with suitable arrangement as per approval of Engineer-

in-charge, (for payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing & fixing UV stabilised fibre glass reinforced plastic sheet roofing upto any

pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia

G.I.plain / bitumen washers complete but excluding the cost of purlins , rafters

,trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs

incorporting minimum 0.3% ultra -voilet stabiliser in resin system under

approximately 2400 psi and hot cured. They shall be of uniform pigmentation and

thickness without air pockets and shall conform to IS 10192 and IS 12866. The

sheets shall be opaque or translucent, clear or pigmented , textured or smooth as

specified - 2mm thick corrugated (2.5" or 4.2 " or 6") or step-down (2" or 3" or 6")

Structural steel work riveted , bolted or welded in built up sections , trusses and

87 10. 2 framed work , including cutting, hoisting , fixing in position and applying a priming KG 39,005.50 94.26 36,76,596.02

coat of approved steel primer all complete

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Design supply & installation of suspended Spider Glazing system designed to

withstand the wind pressure as per IS 875 (Part-III). The Suspended System held

with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass

panel having 12 mm thick clear toughened glass held together with SS- 316 Grade

Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The

Glass fins and glass panel assembly shall be connected to Slab/beams by means of

SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS

88 25.8 channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants Sqm 3,923.39 3,731.77 1,46,41,195.76

of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic

contacts, all complete to perform as per specification and approved drawings. The

complete system to be designed to accommodate thermal expansion & seismic

movements etc. The joints between glass panels (6 to 8 mm) and gaps at the

perimeter & in U channel of the assembly to be filled with non staining weather

sealant, so as to make the entire system fully water proof & dust proof The rate

shall include all design, Engineering and shop drawing including approval from

Providing and laying soft Korean grass turfing including supplying red

89 11.30 earth,manure, river sand, labour charges for ground preparation spreading earth Sqm 871.00 955.29 8,32,059.85

and manure transportation of all and maintaining the lawn for initial three months

Providing and fixing in position 12 mm thick bitumen impregnated fibre board

90 5.28 conforming to IS : 1838 , including cost of m primer , sealing compound in Sqm 164.01 530.4454 86,999.62

expansion joints

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

WATER SUPPLY AND SANITARY ARRANGEMENTS

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

91 12.41.2 conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : RM 628.60 306.25 1,92,505.86

5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories

for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A,

including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for

thermal expansion - bend 87.5 degree - 110 mm bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories

93 12.42.6.2 for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, Each 60.00 373.99 22,439.35

including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for

thermal expansion. Shoe (Plain)-110 mm

Providing and fixing unplasticised -PVC pipe clips of approved design to

unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs,

94 12.43.2 screwed with M.S. screws of required length, including cutting brick work and fixing Each 290.00 298.20 86,477.36

in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc.

complete- 100mm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank

ISI: 12701 marked , with cover and suitable locking arrangement and making

necessary holes for inlet, outlet and overflow pipes but without fittings and the base

support for tank - Circular Tank

Providing and fixing gun metal gate valve with C.I.wheel of approved quality

(Screwed end) - 25mm nominal bore

Providing and fixing gun metal gate valve with C.I.wheel of approved quality

(Screwed end) - 32mm nominal bore

Providing and fixing gun metal gate valve with C.I.wheel of approved quality

(Screwed end) - 40mm nominal bore

Providing and fixing gun metal gate valve with C.I.wheel of approved quality

(Screwed end) - 50mm nominal bore

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making

100 18.11.1 good the walls etc. concealed pipe, including painting with anti corrosive bitumastic metre 433.00 423.47 1,83,361.04

paint, cutting chases and making good the wall : 15 mm dia nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

15 mm nominal bore

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Providing and fixing wash basin with C.I. brackets,15 mm C.P. brass pillar taps, 32

mm C.P. brass waste of standard pattern, including painting of fittings and brackets,

cutting and making good the walls wherever require:White Vitreous China Wash

basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

103 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make. Each 68.00 797.88 54,255.88

Providing and fixing white vitreous china flat back or wall corner type lipped front

urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with

automatic flushing cistern with standard flush pipe and C.P. brass spreaders with

brass unions and G.I clamps complete, including painting of fittings and brackets,

cutting and making good the walls and floors wherever required :One urinal basin

with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing white vitreous china pedestal type water closet (European type)

with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush

bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with

specials of standard make and mosquito proof coupling of approved municipal

design complete, including painting of fittings and brackets, cutting and making

good the walls and floors wherever required :

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100

mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern,

including flush pipe, with manually controlled device (handle lever) conforming to IS

: 7231, with all fittings and fixtures complete, including cutting and making good

the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan

of size 580x440 mm with integral type foot rests

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as

approved by Engineer in charge.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and

108 18.74.2 bush of approved quality and colour. 18.74.1 15 mm nominal bore with 30cm length Each 76.00 81.90 6,224.69

15 mm nominal bore with 45 cm length

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of

approved quality conforming to IS:8931 15mm nominal bore

Providing and fixing on wall / column face unplasticed - PVC soil and waste pipes

110 19.33.1 (type - B) conforming to IS : 13592- 1992 including jointing with seal ring metre 205.00 355.10 72,794.97

conformation to IS : 5382 leaving 10mm gap for thermal expansion - single socked

pipes -110mm diametre

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Providing and fixing on wall / column face unplasticed - PVC soil and waste pipes

111 19.33.2 (type - B) conforming to IS : 13592- 1992 including jointing with seal ring metre 401.00 217.47 87,207.07

conformation to IS : 5382 leaving 10mm gap for thermal expansion - single socked

pipes -75mm diametre

Providing and fixing in position UPVC fabricated bend (Finolex / jain)(0.6 Mpa)

112 conforming to IS 7834 part II and ISI marked,including labour charges for jointing,

jointing materials etc,complete

Providing and fixing in position UPVC fabricated bend (Finolex / jain)(0.6 Mpa)

113 conforming to IS 7834 part II and ISI marked,including labour charges for jointing,

jointing materials etc,complete

Providing and fixing in position UPVC fabricated bend (Finolex / jain)(0.6 Mpa)

114 conforming to IS 7834 part II and ISI marked,including labour charges for jointing,

jointing materials etc,complete

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 -

iron trap with 100mm inlet and 100mm outlet

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I.

grating brick masonry chamber with water tight C.I. cover with frame of 300 x300

116 19.4.1.1 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be Each 30.00 1574.77 47,243.07

not less than 2.70 kg as per standard design: 100x100 mm size P type With

common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded

fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of

117 18.8.4 pipes & fittings , with one step CPVC solvement cement and the cost of cutting Rmt 275.00 549.07 1,50,993.10

chases and making good the same including testing of joints complete - Concealed

work , including cutting chases and making good the wall etc - 32 mm nominal

outer dia pipes

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded

fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of

118 18.8.3 pipes & fittings , with one step CPVC solvement cement and the cost of cutting Rmt 399.20 446.42 1,78,209.91

chases and making good the same including testing of joints complete - Concealed

work , including cutting chases and making good the wall etc - 25 mm nominal

outer dia pipes

Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded

119 18.7.5 fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing Rmt 125.00 510.55 63,818.83

of pipes & fittings with one step CPVC solvent cement and testing of joints complete

- internal work - exposed on wall - 40mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded

120 18.7.6 fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing Rmt 125.00 383.45 47,931.60

of pipes & fittings with one step CPVC solvent cement and testing of joints complete

- internal work - exposed on wall - 50mm nominal outer dia pipes

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement

mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100

mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with

chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

121 18.33.1 aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete Each 9.00 7832.89 70,495.98

1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size )

and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm

thick, finished with a floating coat of neat cement complete as per standard design

:With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement

mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100

mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with

chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

122 18.34 aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete Each 10.00 13754.86 1,37,548.59

1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size )

and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm

thick, finished with a floating coat of neat cement complete as per standard design

:With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

123 17.31 approved quality) complete with 6 mm thick hard board ground fixed to wooden Each 60.00 1529.65 91,778.75

cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth

124 18.65 102mm, height of 75mm with concealed fitting arrangements, weighing not less Each 60.00 173.86 10,431.67

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm

Providing and fixing PTMT towel rail complete with brackets fixed to wooden

cleats with CP brass screws with concealed fittings arrangement of approved quality

and colour600 mm long towel rail with total length of 645 mm, width 78 mm and

effective height of 88 mm, weighing not less than 190 gms

Providing and fixing C.P. brass stop cock (concealed) of standard design and of

approved make conforming to IS:8931. 15 mm nominal bore

Boring / drilling bore well of required dia for casing / strainer pipe, by suitable

method prescribed in IS : 2800 (part 1) , including collecting samples from different

128 24.1.1.1 strata , preparing and submitting strata chart /bore log, including hire RM 195.00 338.90 66,084.72

& running charges of all equipments, tools , plants & machineries required for the

job, all complete - upto 90 metre depth below ground level - all types of soil - 300

Supplying and lowering of UPVC 150mm dia Plain casing pipe confirming to

IS:12818-1992 with relevant amendments with class designation CM and with

129 30.29 minimum wall thickness of 7.5 mm as per I.S.Code into the bore well with proper RM 30.00 1144.68 34,340.48

vertical alignments etc. Including the cost of materials , but excluding the cost of

labour for positioning the assembly for lowering purpose using contractor's rig

130 30.30 Extra for providing 3 mm slots in 150mm dia.UPVC casing pipes RM 130.00 62.29 8,097.99

Supplying, assembling, lowering and fixing in vertical position in bore well,

unplasticized PVC medium well casing (CM) pipe of required dia , conforming to

IS:12818, including required hire and labour charges, fittings & accessories etc. all

complete , for all depths - 150 mm nominal size dia

Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore

/Nandi) (1 Mpa)conforming to IS specification 4985 and ISI marked including

transportation to the site , lowering to the trenches, laying to proper grade

132 31.160.1E and alignment, testing of joints with required testing equipment,including cost of RM 39.00 125.93 4,911.25

solvent cement,excluding UPVC specials such as bends,tees, threaded

pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS specification

4985 and ISI marked including transportation to the site , lowering to the

trenches, laying to proper grade and alignment, testing of joints with

133 31.160.1G required testing equipment,including cost of solvent cement,excluding UPVC RM 420.00 265.38 1,11,460.44

specials such as bends,tees, threaded pieces,couplers,reducer,endcaps

etc.,complete all as per IS and CPWD specification. - 75mm

Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS specification

4985 and ISI marked including transportation to the site , lowering to the

trenches, laying to proper grade and alignment, testing of joints with

134 31.160.1K required testing equipment,including cost of solvent cement,excluding UPVC RM 76.00 829.30 63,027.10

specials such as bends,tees, threaded pieces,couplers,reducer,endcaps

etc.,complete all as per IS and CPWD specification. - 160mm

Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS specification

4985 and ISI marked including transportation to the site , lowering to the

135 31.160.1M trenches, laying to proper grade and alignment, testing of joints with required RM 151.00 1748.48 2,64,020.00

testing equipment,including cost of solvent cement,excluding UPVC specials such as

bends,tees, threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS

and CPWD specification. - 200mm dia.

Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including

136 19.35.1 collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 RM 384.00 2262.97 8,68,979.94

cement : 2 fine sand) including testing of joints etc. complete 450 mm dia RCC

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of

137 19.19.1.1 required shape and approved quality - LD - 2.5 - rectangular shape 600x450 mm No 8.00 1271.63 10,173.02

inernal dimensions

Supplying of electrically operated wet type submersible motor and pumpset AC 3

phase, 415 volts, 50 Hz, 2900-3000 RPM.The pump shall have brass impeller,

high grade steel shaft with sufficient stages having outlet size of 2"/2.5"/3" dia. to

138 31.250.1A suit the borewell (150 / 200mm dia. ), complete.The rate includes, all taxes, No 4.00 53013.51 2,12,054.02

freight, etc., FOR at site in UT of Puducherry. The pumpset shall be guaranteed

for a period of one year from the date of commissioning.(5 HP Submersible

motor and pumpset).

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying of electrically operated, single no stage high speed, centrifugal

monoblock with volute type delivery pumpset (Texmo/KSB/Taro/Kirloskar) make, AC

3 phase, 415V, 50 HZ, 2900 - 3000 RPM. The pump shell have C.I. impeller, high

grade steel shaft having (100mm x 100mm) suction and delivery respectively

including stainer / foot valve to pump the water from UGR to OHT. The rate

includes, all taxes, freight, etc., FOR at site in UT of Puducherry. The pumpset shall

be guaranteed for a period of one year from the date of commissioning.(5 HP

Monoblock centrifugal motor and pumpset).

Supplying and fixing of fully automatic air break star-delta starter range for 5A

140 31.256.1A to 13A F.A.S.D.with suitable M.S. angle frame etc., complete.- 5HP to 12.5 No 4.00 6641.82 26,567.28

Supplying and fixing of 1x3x4 sqmm (single run) PVC insulated copper submersible

flat flexible cable of Finolex make complete.-upto 10HP pumpset

SUB TOTAL = 54,38,808.00

FIRE FIGHTING ARRANGEMENTS

142 1 EXCAVATION :

Excavating trenches of required width for pipes and fittings etc. including dressing

of sides, ramming of bottom depth upto 1.5 Mtrs including getting out the

excavated soil and then returning the soil as required in layers not exceeding 20

cms in depth including consolidating each deposited layer by ramming, watering,

etc. and disposing of surplus excavated soil as directed within a lead of 150 mtrs

(pipe not exceeding 300 mm).

In ordinary soil. Cum 600.00 621.05 3,72,631.58

143 2 RCC HUME PIPE:

Providing, Laying. Testing & Commissioning of RCC hume pipes of NP2 class with

suitable collars filling the recess at joints of pipes with hemp dipped in hot bitumen

or other suitable compound for chaulking of joint by jack, setting up of loose space

over the collar joints caulked with CM 1:2, finished both ends to a slope of 1:1

including curing, testing of pipes, etc., complete.

144 3 SLAB / WALL CORECUTTING:

Drilling with core cutting machine in RCC beams,slabs floors,etc., for laying pipes

and rendering thesame in RCC 1:2:4, finishing the same to the satisfaction of the

owner or his authorized representative etc., including nominal reinforcement

wherever required, complete. The quoted rate shall alsoinclude for providing EPOXY

based water proofingcompound for sealing the joints around the pipes.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

a 50mm dia upto 110 mm dia. Nos. 2.00 1,314.15 2,628.29

b 100mm dia. upto 150 mm dia. (from pump room - pipe outlets) Nos. 2.00 1,676.84 3,353.68

FIRE HYDRANT SYSTEM

145 1 UNDER GROUND PIPING

Supplying, installing, testing and commissioning of G.I Pipes, ERW confirming to IS

1239 Pt - I Class 'C' Heavy grade up to 150mm dia and pipes 200mm dia and above

shall be G.I as per IS: 3589 (6mm Wall thick) with painting, suitable type of

supports, anchor fasteners, bolts nuts ( Galvanised), clamps, "U" bolts, malleable

specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing

in / on walls, ceiling by using suitable supports etc, complete.

PIPE TO EXTERNAL YARD HYDRANT

c c) 40 mm dia.(For MLCP water curtain) Rmt 210.00 2,075.56 4,35,867.16

146 2 PIPING ABOVE GROUND :

Supply, errect, jointing, testing and commissioning of heavy class G.I pipes (as per

IS-1239). The pipes being fixed on to the wall or suspended from the ceiling / truss

with angle iron supports complete with bends, tees, flanges and with all other

required accessories including painting of the pipeline with two coats of approved

enamel paint over a coat of anti corrosive primer etc. complete. As per IS code

standards.Rate quoted above shall include providing M.S.supports in angle iron /

plates pipes etc. at every 2.5 m c/c. Rate quoted shall include for supply and

providing necessary, welding cutting, 'U' clamps both nuts, washers etc.as per

specification or pipe supports for horizontal / vertical pipes running along wall /

column, slabs trenches etc to suit different dia pipes made of GI/MS rods, flats etc.

consists of strap, nuts washers, threaded rod etc., rate quoted shall also include

necessary aniti corrosive painting and 2 coat f approved enamel colour paint

a b) 100 mm dia. (Basement ceiling, risers & Terrace) Rmt 225.00 2,243.24 5,04,729.47

b c) 150 mm dia. (Basement ceiling, external yard hydrant and risers) Rmt 100.00 3,989.64 3,98,964.21

147 3 BUTTERFLY VALVE:

Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 (

PN 10/16) slim seal standard lever operated type with required flanges, nuts, bolts

a b) 100 mm dia. (Shaft riser and Terrace) Each 13.00 2,593.52 33,715.71

c c) 150 mm dia. (Shaft riser and Terrace) Each 5.00 4,307.62 21,538.11

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

148 4 AUTOMATIC AIR RELEASE VALVES (TERRACE LVL FOR WET RISER) :

Supply, fixing, testing and commissioning of Air release valves screwed ends of

approved brand of manufacture, with accressories,etc complete

149 5 BALL VALVE (for arv)

Supplying, installing, testing and commissioning of heavy duty Gun Metal gate

valves screwed ends of approved brand of manufacture.PN-10

150 6 NON RETURN VALVE (TERRACE LVL FOR OHT OUTLET ) :

Supply, fixing, testing and commissioning of Non return valve falnged end of

approved brand of manufacture, with accressories,etc complete. PN:10

151 7 INTERNAL FIRE HYDRANT SYSTEM :

a)1 Nos. 63 mm dia female instantaneous pattern oblique SINGLE outlet hydrant

valve with chain and cap of GM gunmetal.

b)2 Nos. 63 mm size RRL as per IS 636 Type I (ISI mark) 15 Mtrs long with 63 mm

gunmetal male and female instantaneous coupling.

c) 63 mm Gunmetal branch pipe with hexagonal detachable 16 mm nozzle, made

instantaneous coupling etc. complete.

d) Hose reel drum with 19 mm dia bore reinforced rubber hose of length 40 Mtrs

d length fitted with 6.35 mm dia. nozzle. The hose reel drum shall be recessed nos 7.00 10,606.34 74,244.36

swinging type with reel drum hose provided with coupling as per detailed

e) Internal hose cabinet frame (1200 x 900 x150) fronted with hinged & lock

e made out of 16 G M.S. sheet with powder coated paint of to suit internal fire duct Nos 7.00 9,149.35 64,045.43

opening to accommodate the following accessories as mention above :-

152 8 EXTERNAL FIRE HYDRANT SYSTEM ( GROUND LVL) :

SINGLE HEADED YARD HYDRANT :

Supply, fix, test and commissioning of the following :-

a) 80 mm dia GI MSDF bend.80 mm dia GI MSDF stand pipe (1 Mtr below + 1 Mtr

a above).The pipe portion below ground shall be with anti corrosive treatment as per Nos 15.00 3,428.21 51,423.16

detail specifications

b) 1 No. 63 mm dia female instantaneous pattern oblique hydrant valve with chain

and cap of gun metal

c) 2 Nos. 63 mm size C.P. Hose as per IS 8423 Type I (ISI mark) 15 Mtrs long with

63 mm gun metal make male and female instantaneous coupling.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

d)63 mm gun metal branch pipe with gun metal hexagonal detachable 16 mm

nozzle, made instantaneous coupling etc. complete.

e) M.S. Hose cabinet stand mouted type fabricated out of M.S. sheet of 16 swg.

with glass fronted ( 4mm thick glass with rubber beeding) door and size of the

e cabinet shall be 600mm x 750 mm x 250 mm Quoted rate shall be includes Nos 15.00 8,014.06 1,20,210.95

suitable stand for mounting, all fasteners etc, and cabinet shall be powder coated of

approved colour both inside and out side.

153 9 TWO WAY FIRE BRIGADE INLET:

a) Two nos. 63 mm dia Gun metal instantaneous inlet arranged on a 100 mm dia GI

header with flanges. b) 1 nos. 100 mm dia Butterfly valves ( PN10) Insitu moulded

154 10 FOUR WAY FIRE BRIGADE INLET:

a) 4 nos. 63 mm dia Gun metal instantaneous inlet arranged on a 150 mm dia GI

header with flanges. b) 1 No. 150 mm non-return valves.- (PN16) c) 1 no of 150 LS 1.00 16,604.46 16,604.46

mm dia Butterfly valves ( PN16) Insitu moulded. d) 1 no of 100 mm dia Butterfly

valves( PN16) Insitu moulded

SPRINKLER PIPING

155 1 INSTALLATION CONTROL VALVE (GROUND LVL)

Supply,fixing and commissioning of Installation control valve consting of :- a) 1 No.

alarm valve and bell b) 2No. Main stop valve. c) Pressure guage, drain valve and

piping etc., as per specification

156 2 UNDERGROUND PIPING :

Supply, erect, jointing, testing and commissioning heavy class G.I pipe (as per IS-

1239) in trenches (1 Mtrs below ground level) with necessary supports at equal

interval. Rate quoted shall include for necessary specials like long radius bends,

tees, including cutting,welding / flanged joints with necessary washers, nuts,

bolts,etc. Rate quoted shall also include for providing concrete anchor blocks

(thrust block) at all change in direction of pipeline and also near each joints and

also providing wrapping and coating for anticorrosive treatment as per specfication.

PIPE FROM PUMP ROOM TO ICV

157 3 SPRINKLERS

a) PENDANT SPRINKLERS

Providing and fixing nominal bore quartzoid bulb type sprinkler 68 Deg.C quick

response pendent type with suitable fittings complete. - K 80

b) SIDE WALL TYPE SPRINKLERS.

Providing and fixing nominal bore quartzoid bulb type sprinkler 68 Deg.C extended

coverage side wall type with sutiable fittings complete. - K 80

158 4 ABOVE GROUND PIPING :

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supply, erection, testing, jointing and commissioning of heavy class GI pipes

conforming to IS 1239. Pipe specials such as bends, tees, reducers, etc. shall

confirm to ASTM A 234 Gr WPB forged fittings. The pipe shall be with flanged joints

/ weld joints. Rate quoted shall include for necessary pair of flanges gaskets, nuts,

bolts, etc., for pipes being suspended from ceilings beam bottom, clamped on to the

walls, etc., and fittings upto 50mm socket welded type, 65 and above should be

butt welded type.and complete.Rate quoted below shall include providing, fixing as

pipe supports from column/wall or suspenders from roof slab to suit various dia of

pipes made out of GI adjustable rods threaded for a sufficient length to adjust the

height of support along with clamping arrangement for holding pipes of anchor

fastening arrangement design of hanger and should confirm to specification. (pipe

support - 25 mm dia to 50 mm dia @ every 1.5 m c/c and 65 mm to 100 mm dia @

every 2.5 m c/c)Also rate quoted shal include necessary pipe supports for 150 dia

with supply and fixing of channel, angle iron, flats as per drawing / instruction at

site to suit site condition, including for necessary G.I 'U' clamps, welding, cutting,

nuts, washers, etc., rate quoted shall also include for giving one coat of zinc

chromate primer and two coats of approved enamel paint for pipe supports.Rate

quoted shall include the insert plate, anchor fastners to fix the plates. Also it shall

include necessary cutting and welding of supports as required.

159 5 SPRINKLER DRAIN UNIT AND FLOW SWITCH UNIT.

Supply, fixing, testing and commissioning of set comprising of bypass unit, union,

sight glass unit.Valve 50 mm dia, 50 mm dia interconnecting pipe, by detailed drg.

b) FLOW SWITCHES.

Supplying, installing, testing and commissioning flow switch on sprinkler distribution

header on each floor and shall be connected to fire alarm panel through cable.

Cable shall be measured seperately.

160 6 SPRINKLER CONTROL VALVE,TEST VALVE AND AIR RELEASE VALVE.

a) BUTTERFLY VALVES :

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155

(PN10/ PN16) slim seal standard lever operated type with required flanges, nuts,

bolts etc. complete( with lock and key arrangement)

b) AUTOMATIC AIR RELEASE VALVES :

Supply, fixing, testing and commissioning of Air release valves screwed ends of

approved brand of manufacture, with accressories,etc complete- PN10

Supplying, installing, testing and commissioning of heavy duty Ball valve screwed

ends of approved brand of manufacture. PN10

Providing and installing in position the following type of sign boards made out of

161 1 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self

adhesive vinyle painted foam board, complete with mirror fasteners.

a) Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED

a OTHERWISE" of 1.5cm height letters in red with white back ground.The size of the Nos 28.00 558.95 15,650.53

board shall be 25cm x 30 cm and shall be fixed at the height of 2 mts. from finished

floor near Manual call points.

b) Floor indentification signage ( ie, GROUND FLOOR …etc.) at each stair enclosure

b on every floor, indicating the floor number in words, lettering size shall be 7.5 cm Nos 28.00 496.84 13,911.58

with contrasting colour from back ground.Size shall be 15cm x 60cm.

Providing and fixing in position the signages " FIRE ORDER" it should contain the

following matter on 3mm thick "Opaque" PVC foam board of computerised cut, PVC

non-reflective self adhesive vinyle painted foam board of 3' x 4'.a) Alert the security

at security at security room by actuating MANUAL CALL POINT located at strategic

162 2 location.b) Evacuate the occupant by using FIRE EXITS AND EMERGENCY EXITS Nos 7.00 3,105.26 21,736.84

ONLY and assenbly at various addembly pointsc) If possible try to extinguish the fire

by using nearest/suitable portable extinguishers or water from nearest wer riser.d)

Be calm and do not give an roon from panic, walk, do not run.e) If you encouner

serious difficulty in evacuaton, flat and try to attract attention of rescue team.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Action by security / Reception upon receipt of information through fire alarm or fire

detector or by using public address system.A) Alart the occupants by using public

address system.B) Inform fire control through any one of the following phone

number: 101/Local nos.c) Refer evacuation plan from evacuating standard people.d)

Guide the fire force, on their arrival to the seat of fire.E) in case of the casualties,

call ambulance by dialling number…..

FIRE EXTINGUISHERS

Supplying, installing and commissioning Portable Fire extinguishers of following type

a a Fire extinguisher of 6 Kgs

Supply and install in position approved make ABC Stored pressure type Fire

Extinguisher of 5 kgs capacity, fitted with discharge control valve (sq.grip type) CE

marked and pressure gauge, filled with mono ammonium phosphate powder as per Nos. 86.00 3,113.96 2,67,800.38

EN 3 615 approval, with discharge hose and open nozzle and supplied complete

with initial charge as per IS: 15683 with ISI mark and wall bracket. Fire Rating 3A,

b b CO2 Fire Extinguisher - 4.5Kg capacity.

Supply and install in position approved make CO2 Stored pressure type Fire

Extinguisher of4.5 kgs capacity, fitted with discharge control valve (sq.grip type) CE

marked and pressure gauge, filled with mono ammonium phosphate powder as per Nos. 4.00 6,642.78 26,571.12

EN 3 615 approval, with discharge hose and open nozzle and supplied complete

with initial charge as per IS: 15683 with ISI mark and wall bracket. Fire Rating 3A,

c c CO2 Fire Extinguisher - 2.0 Kg capacity. (Kitchen & inside lift)

Supply and install in position approved make CO2 Stored pressure type Fire

Extinguisher of 2.0 kgs capacity, fitted with discharge control valve (sq.grip type) CE

marked and pressure gauge, filled with mono ammonium phosphate powder as per Nos. 5.00 9,135.68 45,678.42

EN 3 615 approval, with discharge hose and open nozzle and supplied complete

with initial charge as per IS: 15683 with ISI mark and wall bracket. Fire Rating 3A,

d d Water Mist Fire Extinguisher - 4.0Ltrs capacity.

Supply and install in position approved make water mist Fire Extinguisher o 6.0 Ltr

capacity, fitted with discharge control valve (sq.grip type) CE marked and pressure

gauge, fwith discharge hose and open nozzle and supplied complete with initial

charge as per IS: 15683 with ISI mark and wall bracket. Fire Rating 3A

e e FIRE BUCKETS WITH ABC FIRE EXTINGUISHER :(PARKING AREA )

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supply and installation of approved make ABC- 5.0 Kg fire extinguisher& Fire

Bucket of 24 guage, galvanised steel sheet of standard 9 Ltrs capacity and ABC

extinguisher 5 kg(Stored pressure type). Bucket shall be round bottom shape,fire

bucket stand & suitable M.S supports & painted round bottom shape,fire bucket

stand & suitable M.S supports & painted white inside and red outside and black on

the bottom dome with letters 'FIRE' in black and gold with wall mounting bracket

and screws.(1sets-4nos buckets & stand) Rate quoted shall include floor mounted

stand as approved by archt.

CONVENTIONAL MANUAL OPERATED FIRE ALARM SYSTEM

165 1 FIRE ALARM DEVICES - MCP, HOOTER AND PA SPEAKER (ADDRESSABLE)

a) Supplying, installing, testing and commissioning approved make Electronic Dual

tone type Hooters with power supply 24v DC (Horn cum Strobe rated at 82 Dba @

a 3m for Audible annunciation and 75cd flashintg at 1 Hz for visual indication), Nos 20.00 2,891.00 57,820.00

6WSpeaker with talk back facility and addressable Manual call points Break glass

b a) Supplying, installing, testing and commissioning Sounder Control Module. Nos 20.00 3,222.58 64,451.60

c b) Supplying, installing, testing and commissioning Addressable Manual call points. Nos 20.00 3,103.40 62,068.00

c) Supplying, installing, testing and commissioning of PA Speaker with necessary

accessories. 6 Watts (Two way talk back).

Supply, testing and commissioning of 1100V Grade 2 core of 1.5 sqmm PVC

insulated FRLS Wire for connecting detectors / devices to panels and main micro

processor control panels located in the respective floors including end termination

with indentification tags at each end, etc., complete.The quoted rates shall be

inclusive of necessary juntion boxes made of M.S 16 SWG with cutouts for incoming

& outgoing cables in respective floors.

167 3 CONDUITS :

a) Supplying, installing, testing and commissioning approved make 25mm P.V.C.

conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Rmt 130.00 88.50 11,505.00

Collars, Bends etc.

168 4 PERFORATED CABLE TRAY :

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supply and fixing of Perforated Cable Trays Upto 300mm size shall be of 2mm

thick with 50mm flange, pre – galvanized.. Above 300mm size shall be of 2mm thick

with 75mm flange, pre – galvanized,bolted type.) Rate shall exclude necessary

angle iron support and M10 full threaded down rods, M10 anchor

fasteners,40x40x6mm MS channels etc., complete as per technical specification.

Maximum height of suspension shall not exceed 500mm. The support shall be

provided at every 1 Mtr.The Cable tray supports upto 450 mm wide Rod support

,More than 450mm wide Ms channel Support.

b) Size : 300X50mm wide - 2mm thick Rmt 110.00 1,150.50 1,26,555.00

2 WAY TALK BACK SYSTEM :

Supplying, installing, testing and commissioning of zone selector Talk back console

169 1 and with CRCA sheet housing,with necessary input ,output devices and control

desk( rack) as required. Console shall have all call / call back facility complete and it

should also work on AC single phase power.

a) 5 ZONE @ Ground level Nos 4.00 47,200.00 1,88,800.00

Supplying, installing, testing and commissioning solid state Amplifier out put in

rack, including neccessory control wires, jacks etc. complete.

b)100 W amplifier (@ Reception desk) Nos 4.00 29,500.00 1,18,000.00

171 3 Supplying, installing, testing and commissioning 40 strand twin core control cables Rmt 270.00 100.30 27,081.00

of PVC insulated copper conductor, Confirming to IS 1554, as per specification.

172 4 Supplying, installing, testing and commissioning approved make 25mm P.V.C. Rmt 100.00 76.70 7,670.00

conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes,

Collars, Bends etc.

FIRE PUMP ROOM EQUIPMENT

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supply, Erection, testing & commissioning of electrical motor driven Hydrant

Pump of horizontal centrifugal end suction backpull out type with gland

packing and capable to deliver 2280LPM (137 m³/ Hr) at 70 MWC with all

necessary accessories like bronze impeller, stainless steel shaft and mechanical seal

along with anti-vibration mounting, coupling, coupling guard and base plate for

pump, fabricated mild steel channel,foundation bolts, and pump should have the

dry run sensor provision, etc., as per local fire brigade requirement . The pump shall

capable to have 3.5 kg/cm² residual pressure at top most hydrant point. The pump

shall be coupled to electrical motor of 65 HP with speed of 2900 RPM, Electric

supply 415V, 50 Hz and complete set shall be mounted on a common base frame.

The quoted rate shall includes providing & fixing of coupling, coupling gaurd and

Foundation bolts etc. RCC foundation is under civil scope.

Supply, Erection, testing & commissioning of Diesel Engine driven common

stand by pump, horizontal centrifugal end suction backpull out type with

gland packing and capable to deliver 2280LPM (137 m³/ Hr) at 70MWC with

all necessary accessories like bronze impeller, stainless steel shaft and mechanical

seal along with anti-vibration mounting, coupling, gear box, base plate for pump,

fabricated mild steel channel with foundation bolts etc., It includes providing and

fixing fuel oil tank (capacity as per TAC requirements) with supports and necessary

174 2 pipe works for diesel engine, battery and battery charger to be connected to control No. 1.00 8,14,200.00 8,14,200.00

panel of diesel engine and exhaust silencer including necessary pipe work and

lagging, pump should have the dry run sensor provision, etc., and shall be

automatic in operation diesel engine control panel with 24V DC storage battery & its

battery charger with required Ampere - hour rating, terminal box (2 nos. of

12volts), cooling water line for engine with required pipes / valves / fittings etc., as

per TAC including all associated electrical works. The pump shall capable to have

3.5 kg/cm² residual pressure at top most hydrant point. The pump shall coupled to

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supply, erection, testing & commissioning of electrical motor driven Jockey

pump of horizontal centrifugal end suction back pull out type with gland

packing and capable to deliver 180LPM (10.8 m³/ Hr) at 70 MWC with all

necessary accessories like bronze impeller, stainless steel shaft and mechanical seal

along with anti-vibration mounting pad and flexible connections at discharge end of

the pipes, pump should have the dry run sensor provision etc. and shall be

automatic in operation.The pump shall be coupled to motor of 15 HP with speed of

2900RPM and complete set shall be mounted on common base frame. The quoted

rate shall includes providing & fixing of coupling, coupling gaurd and Foundation

bolts etc. RCC foundation is under civil scope.foundation is under civil scope

Supply, Erection, testing & commissioning of electrical motor driven Hydrant Pump

of horizontal centrifugal end suction backpull out type with gland packing and

capable to deliver 2280LPM (137 m³/ Hr) at 70 MWC with all necessary accessories

like bronze impeller, stainless steel shaft and mechanical seal along with anti-

vibration mounting, coupling, coupling guard and base plate for pump, fabricated

mild steel channel,foundation bolts, and pump should have the dry run sensor

provision, etc., as per local fire brigade requirement . The pump shall capable to

have 3.5 kg/cm² residual pressure at top most hydrant point. The pump shall be

coupled to electrical motor of 65 HP with speed of 2900 RPM, Electric supply 415V,

50 Hz and complete set shall be mounted on a common base frame. The quoted

rate shall includes providing & fixing of coupling, coupling gaurd and Foundation

bolts etc. RCC foundation is under civil scope.

Supply, Erection, testing & commissioning of electrical motor driven Water

curtain Pump of horizontal centrifugal end suction backpull out type with gland

packing and capable to deliver 2280LPM (137 m³/ Hr) at 40 MWC with all

necessary accessories like bronze impeller, stainless steel shaft and mechanical seal

along with anti-vibration mounting, coupling, coupling guard and base plate for

pump, fabricated mild steel channel,foundation bolts, and pump should have the

dry run sensor provision, etc., as per local fire brigade requirement . The pump shall

capable to have 3.5 kg/cm² residual pressure at top most hydrant point. The pump

shall be coupled to electrical motor of 65 HP with speed of 2900 RPM, Electric

supply 415V, 50 Hz and complete set shall be mounted on a common base frame.

The quoted rate shall includes providing & fixing of coupling, coupling gaurd and

Foundation bolts etc. RCC foundation is under civil scope.

177 5 Control Panel for Fire pumps.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Fabrication, Supplying, Installation, Testing & Commissioning of electrical control

panel, of cubical construction, floor mounted type, fabricated out of 2mm thick

CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof,

powder coated of approved shade after 7 tank treatment process, cable alley, inter- Set 1.00 1,80,105.26 1,80,105.26

connection, having switchgears and accessories mounting and internal wiring, earth

terminals, numbering etc. complete in all respects, suitable for operation on 415 V,

3 phase, 50 HZ. AC supply with enclosure protection class IP 42 as required.

(ii) OUTGOING.

Diesel Engine Control.

Control for Diesel Engine comprising:-

(i) Auto/Manual selector switch & 3 attempt starting device, timers and relays as

required, push buttons, start/stop in manual mode.

176 (ii) Indication lamp for High/Low Lub.oil pressure, High Water Temp.and Engine Set 1.00 59,993.68 59,993.68

(iii) Battery charger suitable for 12 V/ 24 V DC with boost and tickle selector switch,

0-30 V DC'<volt meter, 0-20A DC Ammeter.

(iv) AII standard relays and accessories for automatic operation of diesel engine.

177 (iii) 1100 V GRADE POWER / CONTROL CABLES

Supplying, laying, testing & commissioning of FRLS, XLPE insulated, PVC outer

sheateh, steel armoured, aluminium / copper conductor, 1100v grade power cables

with glands etc. The cables shall be laid in tray / Hume pipe / in trenches/on walls/

floor etc. as required. For cables laid out door the rate shall include earth excavation

providing brick and sand protection, refilling and compacting the earth.The rate

shall excludes tray & Hume pipes.The minimum size of the cables shall as

mentioned below,

a) 2R x 3.5 core x 50 sqmm Aluminium conductor cable for Electrical motor Driven

b b) 4 core x 16 sqmm Aluminium conductor cable for Jockey Pump. Mtr 15.00 342.82 5,142.32

c c) 12 core x1.5 sqmm Copper cable for Diesel Engine pump Mtr 15.00 614.84 9,222.63

d d) 2 core x 1.5 sqmm Copper cable for pressure switch Mtr 25.00 300.59 7,514.74

e e) 4 core x 2.5 sq mm Copper cable for MCC to ESP interlocking. Mtr 15.00 799.92 11,998.74

178 (Iv) CABLE TRAY

Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle iron

suspension supports, anchor fasteners etc. complete. Maximum height of Rmt 30.00 1,329.05 39,871.58

suspension shall not exceed 500 mm.Size of the tray shall be suitable for laying the

above mentioned cables.

179 (v) ELECTRONIC LEVEL INDICATOR :

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supply, fixing, testing and commissioning of electronic type level indicaor of

approved make with pressure transducer, alarm,sensors, LED display for indicating

high, half full and low level in sump (ground level reservoir) Rate quoted shall

include for supply and laying necessary armoured control cablling inside pumphouse Set 1.00 40,492.63 40,492.63

(approx. length 30 meters) for connecting sensors to panels located inside

pumphouse, wiring from the control panel to sensor probes, ON / OFF indicators

etc. complete in all respects.

180 (vi) VALVES AND STRAINERS :

SLUICE VALVES : Tank outlet; Supply, install, testing & commissioning of CI

sluice valves of approved make as per IS 780 Class I with necessary flanged tail

piece, compansion flanges, bolts, nuts, gaskets, etc.,complete in all respects. PN 10

STRAINER :Tank outlet

Supply, Installation , Testing & Commissioning of MS Fabricated Pot/Basket Strainer

with accessories etc., complete. 200 mm dia

NON RETURN VALVE:

Supply, Installation , Testing & Commissioning of NON RETURN VALVE with

accessories etc., complete.-PN16 150 mm dia.

a) Supplying, Installing, testing and commissioning CI Sluice valves as per BS 5155 (

PN 16) slim seal standard lever operated type with required flanges, nuts, bolts etc.

BUTTERFLY VALVE

b) Supplying, Installing, testing and commissioning CI butterfly valves as per BS

5155 ( PN 10) slim seal standard Gear operated type with required flanges, nuts,

bolts etc. complete. (For Delivery Header)

a) Supplying, Installing, testing and commissioning of Flow meter with necessary

accessories as per standard specifications etc complete. 150 mm dia.

Supplying, installing, testing and commissioning of Gun metal chrome finished Ball

181 (viii) valves with fittings of screwed end type. 25 mm nominal dia (for pressure switch Nos 4.00 999.89 3,999.58

manifold & air vessel tank)

Supply and installation of differential Pressure switches of suitable range (0 to 12

182 (ix) bar) for pumpsets complete with necessay Ball valves, Fittings like unions / colors / Set 5.00 6,713.58 33,567.89

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supply and installation of Pressure gauges of suitable range (0-16 bar), 110 mm

183 (x) diameter dial for pumpsets completes with necessary Ball valves, siphon, Fittings Set 4.00 3,785.94 15,143.75

like unions / colors / reducers etc.

Supply, fixing, testing and commissioning of air vessel tank shall be fabricated out

of of 250 mm dia MS pipe to 1000 mm long complete with 25mm inlet, 25mm drain,

184 (xi) 25mm dia connection for air release valve including legs, painting with red oxide No. 1.00 36,424.74 36,424.74

primer and finished with fire red enamel paint. It shall be inclusive of all relevant

pipes, valves, specials upto pump header and other accessories etc.

Exhuast pipe for Diesel engine of 100 mm dia M.S. Medium grade with mineral wool

insulation with aluminum sheet. The quoted rate shall include 100 mm diameter MS

pipe medium grade conforming to IS 1239 Part-1 and mineral wool insulation with

aluminum sheeting and Pipe supports also.

3 SEATER SITTING

Supply and fixing of Three Seater Tandem with Arms , With Shiny Finishthe shell

shall be assembled on the cross beam with help 0f bolt and brackets with Product

Dimensions : 64D x 180W x 80H cm; Style Contemporary ;

Material : Chrome Steel

SUB TOTAL = 12,60,240.00

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Providing & Fixing RO Plant for supplying drinking water purpose with following

standards: Make : Cri or Equivalent ; Flowrate : 1500 Lph Inlet / Outlet : 25mm ;

Type : Monoblock 1hp

PRESSURE SAND FILTER:

Make : PENTAIR or Equivalent ; Flow rate : 1500 Lph ; Material of Construction :

Inlet / Outlet Connection : 25 mm ; Multi port Valve Size : 25 mm

Media : Pebbles & Sylex and Sand.

ACTIVATED CARBON FILTER:

Make : PENTAIR or Equivalent ; Flow rate : 1500 Lph ; Material of Construction :

Inlet / Outlet Connection : 25 mm; Multi port Valve Size : 25 mm ; Media : Cocount

Shell Activated Carbon & Pebbles.

Flow rate : 1500 Lph ; Material of ; Construction : Polypropylene ; Inlet / Outlet

Connection : ¾” mm ; Number of Cartridges : 2 Nos. of 20” Long ; Number of

Housing : 2 Nos. ; Working Pressure : 2 to 3 Kg / Sq. cm ; Filter Elements :

RO PLANT FRAME:

Skid : Stainless Steel (SS 202 Grade) ; Thickness of square pipe : 1 inch ; Thickness

of sheet : 1.2 mm ; Method of cutting : Laser. Membrane: ; Material of Construction

: Thin Film Composite ; Make : ( FILMTEC/Brackish/Hydranatics ) ; No. of

Membranes : 2 Nos. Dimension : 40” x 40”

Type of membrane : Sprial Wound.

HIGH PRESSURE PUMP: SUB TOTAL = 5,14,480.00

ICE FACTORY MACHINE

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supply and fixing of 452 XL freon compressor fly wheel , motor, pulley, pressure

gauges, tool kit, service kit, shut of valves, For suction and discharge line , gasket

set, Base frame,compressor bolt,Tubing ferrules & nuts etc, without motor.Square

surface mounted Buttons KDS300 ; Landing ; Signalization Stainless Steel 7

segment display Flush ; Mounted Silver brushed St Square, surface mounted ;

KDS300 ; 1 no 30HP,3HP open type squirrel gauge induction motor, 1440rpm

motor. 3HP water pump . 1No freon oil separator TYPE D ; 1No freon accumulator

VERTICAL 20”x48” long 10mm thick . 1No Shell and tube water cooled condenser

with copper tube. 1No 60TR STANDARD make FRP cooling tower with fan blower

(forced type) ; 1No Refrigeration freon evaporator coils made of MS tubes with

header and accumulator suitable to above plant.; 1No MS ice freezing tank suitable

188 size to accommodate 150 Nos of 50kgs ice cans having thickness of 6mm for bottom Nos 1.00 6767300 67,67,300.00

and 5mm of side wall complete with nessary ms angle & channels as a stiffener

freezing tank.; 150 No Ice cans make of (16 gaugs)galvanized materials of size 8”x

16” x36” , Lot Thermocole insulation for freezing tank of thickness of 150mm in two

layer bottom (75mm+75mm) and 115mm (75mm+40mm) side wall ,suction

lines,accumulater. , Lot GI pipe line and fitting for condenser water circulation. Lot

class “C’ Refrigerant pipe, makes Freon valves for inter connection the various

refrigeration equipement. Lot First charge of freon R-404A gas,compressor

lubrication oil, starter oil for testing and commissioning of the plant. Lot MS

channels, MS rods and wooden can covers for ice cans or wood works. Lot Electrical

panel board , controlle , starter, wires &cables should be of L&T make. ; 1No

Agitator for suitable capacity should be provided evaoprator unit to brine tank. ;

1No MANUAL Hand hoist,side rail wheels for ice lifting amd shifting. Fabrication SUB TOTAL = 67,67,300.00

ELECTRICAL WORKS

MAIN MARKET BLOCK-1

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and

189 5.2 providing masonry enclosure with cover plate having locking arrangement and Each 4.00 3,815.97 15,263.88

watering pipe etc. with charcoal / coke and salt as required

Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including

190 5.4 accessories, and providing masonry enclosure with cover plate having locking Each 4.00 4,355.34 17,421.36

arrangement and watering pipe of 2.7 meter long etc.but without charcoal / coke

and salt as required

Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for

191 5.7 conductor earth electode, including connection / termination with GI thimble etc. as Rm 80.00 19.63 1,570.20

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying and laying 25 mm x 5 mm copper strip at 0.50 metre below ground as

strip earth electrode , including connection / terminating with nut , bolt, spring ,

washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of

brass nut bolt & spring washer spached at 50mm)

Supplying and laying 25 mm x 5 mm G.I strip at 0.50 meter below ground as strip

earth electrode , including connection / terminating with G.I. nut , bolt, spring ,

washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of

G.I.nut bolt & spring washer spached at 50mm)

Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for

connections etc as require

Providing and fixing 25mm x 5mm GI.strip on surface or in recess for connections

etc . as required

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop

earthing as required.

Wiring or light point / fan point / exhaust fan point / call bell per point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed

197 1.10.3 medium class pvc conduit , with modular switch, modular plate, suitable GI box and Point 882.00 590.15 5,20,507.89

earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable etc.as required - GROUP C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium class PVC conduit , 2 way

modular switch , modular plate , suitable GI box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable etc.as required

Wiring for group controlled (looped) light point / fan point / exhaust fan point / call

bell point (without indepdent switch etc.) with 1.5 sq.mm FRLS PVC insulated

199 1.55.3 copper conductor single core cable in surface / recessed PVC conduit , and earthing Point 55.00 337.79 18,578.18

the point 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as

required - Group C

Supply and fixing of meter board suitable for 32A three phase service connection

with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper

TN SOR SD flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of

127,P.NO58 1" thick an either side with painting with suitable bolt and nuts for fixing the TW

plank on wall with earth connection and inter connection with 7/20 PVC insulated

copper wire from EB meter to fuse unit

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying and fixing TP sheet steel enclosure on surface / recess along with

201 2.17 16/25/32 A, 415 V "C" curve TP MCB complete with connections , testing and Nos 142.00 789.24 1,12,072.08

commissioning etc as required

Supplying and fixing following modular switch / socket on the existing modular plate

202 1.24.1 & switch box including connections but excluding modular plate etc. as required - Each 566.00 47.78 27,040.65

Supplying and fixing following modular switch / socket on the existing modular

203 1.24.3 plate & switch box including connections but excluding modular plate etc. as Each 202.00 85.11 17,192.22

required - 15/16 A switch

Supplying and fixing following modular switch / socket on the existing modular

204 1.24.4 plate & switch box including connections but excluding modular plate etc. as Each 566.00 69.65 39,419.07

required - 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch / socket on the existing modular

205 1.24.5 plate & switch box including connections but excluding modular plate etc. as Each 208.00 121.01 25,169.04

required - 6 pin 15/16 A socket outlet

Supplying and fixing following modular switch / socket on the existing modular

206 1.24.6 plate & switch box including connections but excluding modular plate etc. as Each 27.00 73.92 1,995.84

required - Telephone socket outlet

Supplying and fixing following modular switch / socket on the existing modular

207 1.24.7 plate & switch box including connections but excluding modular plate etc. as Each 16.00 74.14 1,186.20

required - TV antenna socket outlet

Supplying and fixing following size / modules , GI box alongwith modular base &

208 1.27.1 cover plate for modular switches in recess etc. as required - 1 or 2 module (75mm x Each 107.00 140.39 15,021.20

Supplying and fixing following size / modules , GI box alongwith modular base &

209 1.27.2 cover plate for modular switches in recess etc. as required - 3 module (100mm x Each 566.00 154.07 87,200.79

Supplying and fixing following size / modules , GI box alongwith modular base &

210 1.27.3 cover plate for modular switches in recess etc. as required - 4 module (125 mm x 75 Each 82.00 167.22 13,712.04

Supplying and fixing following size / modules , GI box alongwith modular base &

211 1.27.4 cover plate for modular switches in recess etc. as required - 6 module (200 mm x 75 Each 82.00 205.20 16,826.40

Supplying and fixing following size / modules , GI box alongwith modular base &

212 1.27.5 cover plate for modular switches in recess etc. as required - 8 module (125 mm x Each 61.00 235.40 14,359.10

Supplying and fixing following size / modules , GI box alongwith modular base &

213 1.27.6 cover plate for modular switches in recess etc. as required - 12 module (125 mm x Each 41.00 275.64 11,301.24

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying and fixing of following sizes of medium class PVC conduit along with

214 1.21.1 accessories in surface/recess including cutting the wall and making good the same Meter 3,651.58 50.22 1,83,382.35

in case of recessed conduit as required. 20mm

Supplying and fixing of following sizes of medium class PVC conduit along with

215 1.21.2 accessories in surface/recess including cutting the wall and making good the same Meter 3,501.58 60.44 2,11,644.25

in case of recessed conduit as required. 25mm

Supplying and fixing of following sizes of medium class PVC conduit along with

216 1.21.3 accessories in surface/recess including cutting the wall and making good the same Meter 2,550.00 77.69 1,98,096.75

in case of recessed conduit as required. 32mm

Supplying and fixing of following sizes of medium class PVC conduit along with

217 1.21.4 accessories in surface/recess including cutting the wall and making good the same Meter 2,550.00 99.64 2,54,075.63

in case of recessed conduit as required. 40mm

Supplying and fixing of following sizes of medium class PVC conduit along with

218 1.21.5 accessories in surface/recess including cutting the wall and making good the same Meter 1,600.00 129.78 2,07,648.00

in case of recessed conduit as required. 50mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

219 1.14.1 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 4,606.00 91.00 4,19,134.49

medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

220 1.14.2 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 3,269.00 108.13 3,53,468.80

medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

221 1.14.3 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 500.00 129.35 64,676.25

medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

222 1.14.4 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 2,101.00 174.11 3,65,810.36

medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supply Of ceiling fan sweep 1250mm fusion -50 energy saving fan five star make -

Havells/Almonard/Usha

Installation , testing and commissioning of ceiling fan , including wiring the down

224 1.44 rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated , copper Each 177.00 835.52 1,47,886.16

conductor , single core cable etc as required

225 1098 300mm 1400 rpm heavy duty exhaust fan Make:Almonard/Orient/Usha Each 32.00 1,755.00 56,160.00

Installation of exhaust fan in the existing opening , including making good the

226 1.50.1 damage , connection , testing , commissioning etc. as required - Upto 450 mm Each 32.00 177.71 5,686.80

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying, Installation, testing and commissioning of 36/40Watt LED Ceiling light

including cost of material, labour etc., complete.

Supplying, Installation, testing and commissioning of 20/22Watt 4 Feet LED Tube

Light including cost of material, labour etc., complete.

TN SOR, Supplying, Installation, testing and commissioning of 7/9Watt LEB Bulb including

cost of material, labour etc., complete.

Supplying, Installation, testing and commissioning of Geyser/Water Heater

230 1111 including cost of material, labour etc., complete.25 ltrs. Storage water heater- ABS Each 6.00 7,000.00 42,000.00

Make: Almonard/Venus/V-Guard

Supplying and installing following size of perforated Hot dipped Galvanised iron

cable tray (galvanization thickness not less than 50 microns) with perforation not

231 4.6.6 more than 17.5% , in convenient sections , joined with connectors , suspended from Meter 322.40 778.93 2,51,126.23

the ceiling with G.I.suspenders including G.I.bolts & nuts , etc .as required - 450

Supplying and installing following size of perforated Hot dipped galvanised iron

cable tray "bends" (galvanisation not less than 50 microns) with perforation not

232 4.7.6 more than 17.5% , in convenient sections , joined with connectors , suspended from Each 8.00 1,646.42 13,171.38

the ceiling with G.I.suspenders including G.I. bolts & nuts , etc.as required - 450

mm width x 50 mm depth x 2.0 mm thickness

Supplying and installing following size of perforated Hot dipped galvanised iron

cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more

233 4.8.6 than 17.5% , in convenient sections , joined with connectors , suspended from the Each 8.00 1,940.42 15,523.38

ceiling with G.I.suspenders including G.I.bolts & nuts . As required - 450 mm width

x 50 mm depth x 2.0 mm thickness

Supplying and installing following size of perforated Hot dipped galvanished iron

cable tray "Cross member" (galvanisation not less than 50 microns) with perforation

234 4.9.6 not more than 17.5% , in convenient sections , joined with connectors , suspended Each 8.00 1,940.42 15,523.38

from the ceiling with G.I.suspenders including G.I.bolts & nuts , etc .as required -

450 mm width x 50 mm depth x 2.0 mm thickness

Supplying and installing following size of perforated Hot dipped galvanised iron

cable tray "Reducer" (galvanisation not less than 50 microns) with perforation not

235 4.10.6 more than 17.5% ,in convenient sections , joined with connectiors , suspended from Each 8.00 2,840.62 22,724.94

the ceiling with G.I.suspenders including G.I.bolts & nuts , etc.as required - 450 mm

width x 50 mm depth x 2.0 mm thickness

SUB TOTAL = 51,22,718.26

MAIN MARKET BLOCK-2

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and

236 5.2 providing masonry enclosure with cover plate having locking arrangement and Each 4.00 3,815.97 15,263.88

watering pipe etc. with charcoal / coke and salt as required

Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including

237 5.4 accessories, and providing masonry enclosure with cover plate having locking Each 4.00 4,355.34 17,421.36

arrangement and watering pipe of 2.7 meter long etc.but without charcoal / coke

and salt as required

Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for

238 5.7 conductor earth electode, including connection / termination with GI thimble etc. as Rm 80.00 19.63 1,570.20

Supplying and laying 25 mm x 5 mm copper strip at 0.50 metre below ground as

strip earth electrode , including connection / terminating with nut , bolt, spring ,

washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of

brass nut bolt & spring washer spached at 50mm)

Supplying and laying 25 mm x 5 mm G.I strip at 0.50 meter below ground as strip

earth electrode , including connection / terminating with G.I. nut , bolt, spring ,

washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of

G.I.nut bolt & spring washer spached at 50mm)

Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for

connections etc as require

Providing and fixing 25mm x 5mm GI.strip on surface or in recess for connections

etc . as required

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop

earthing as required.

Wiring or light point / fan point / exhaust fan point / call bell per point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed

244 1.10.3 medium class pvc conduit , with modular switch, modular plate, suitable GI box and Point 882.00 590.15 5,20,507.89

earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable etc.as required - GROUP C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium class PVC conduit , 2 way

modular switch , modular plate , suitable GI box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable etc.as required

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Wiring for group controlled (looped) light point / fan point / exhaust fan point / call

bell point (without indepdent switch etc.) with 1.5 sq.mm FRLS PVC insulated

246 1.55.3 copper conductor single core cable in surface / recessed PVC conduit , and earthing Point 55.00 337.79 18,578.18

the point 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as

required - Group C

Supply and fixing of meter board suitable for 32A three phase service connection

with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper

TN SOR SD flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of

127,P.NO58 1" thick an either side with painting with suitable bolt and nuts for fixing the TW

plank on wall with earth connection and inter connection with 7/20 PVC insulated

copper wire from EB meter to fuse unit

Supplying and fixing TP sheet steel enclosure on surface / recess along with

248 2.17 16/25/32 A, 415 V "C" curve TP MCB complete with connections , testing and Nos 142.00 789.24 1,12,072.08

commissioning etc as required

Supplying and fixing following modular switch / socket on the existing modular plate

249 1.24.1 & switch box including connections but excluding modular plate etc. as required - Each 566.00 47.78 27,040.65

Supplying and fixing following modular switch / socket on the existing modular

250 1.24.3 plate & switch box including connections but excluding modular plate etc. as Each 202.00 85.11 17,192.22

required - 15/16 A switch

Supplying and fixing following modular switch / socket on the existing modular

251 1.24.4 plate & switch box including connections but excluding modular plate etc. as Each 566.00 69.65 39,419.07

required - 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch / socket on the existing modular

252 1.24.5 plate & switch box including connections but excluding modular plate etc. as Each 208.00 121.01 25,169.04

required - 6 pin 15/16 A socket outlet

Supplying and fixing following modular switch / socket on the existing modular

253 1.24.6 plate & switch box including connections but excluding modular plate etc. as Each 27.00 73.92 1,995.84

required - Telephone socket outlet

Supplying and fixing following modular switch / socket on the existing modular

254 1.24.7 plate & switch box including connections but excluding modular plate etc. as Each 16.00 74.14 1,186.20

required - TV antenna socket outlet

Supplying and fixing following size / modules , GI box alongwith modular base &

255 1.27.1 cover plate for modular switches in recess etc. as required - 1 or 2 module (75mm x Each 107.00 140.39 15,021.20

Supplying and fixing following size / modules , GI box alongwith modular base &

256 1.27.2 cover plate for modular switches in recess etc. as required - 3 module (100mm x Each 566.00 154.07 87,200.79

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying and fixing following size / modules , GI box alongwith modular base &

257 1.27.3 cover plate for modular switches in recess etc. as required - 4 module (125 mm x 75 Each 82.00 167.22 13,712.04

Supplying and fixing following size / modules , GI box alongwith modular base &

258 1.27.4 cover plate for modular switches in recess etc. as required - 6 module (200 mm x 75 Each 82.00 205.20 16,826.40

Supplying and fixing following size / modules , GI box alongwith modular base &

259 1.27.5 cover plate for modular switches in recess etc. as required - 8 module (125 mm x Each 61.00 235.40 14,359.10

Supplying and fixing following size / modules , GI box alongwith modular base &

260 1.27.6 cover plate for modular switches in recess etc. as required - 12 module (125 mm x Each 41.00 275.64 11,301.24

Supplying and fixing of following sizes of medium class PVC conduit along with

261 1.21.1 accessories in surface/recess including cutting the wall and making good the same Meter 3,651.58 50.22 1,83,382.35

in case of recessed conduit as required. 20mm

Supplying and fixing of following sizes of medium class PVC conduit along with

262 1.21.2 accessories in surface/recess including cutting the wall and making good the same Meter 3,501.58 60.44 2,11,644.25

in case of recessed conduit as required. 25mm

Supplying and fixing of following sizes of medium class PVC conduit along with

263 1.21.3 accessories in surface/recess including cutting the wall and making good the same Meter 2,550.00 77.69 1,98,096.75

in case of recessed conduit as required. 32mm

Supplying and fixing of following sizes of medium class PVC conduit along with

264 1.21.4 accessories in surface/recess including cutting the wall and making good the same Meter 2,550.00 99.64 2,54,075.63

in case of recessed conduit as required. 40mm

Supplying and fixing of following sizes of medium class PVC conduit along with

265 1.21.5 accessories in surface/recess including cutting the wall and making good the same Meter 1,600.00 129.78 2,07,648.00

in case of recessed conduit as required. 50mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

266 1.14.1 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 4,606.00 91.00 4,19,134.49

medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

267 1.14.2 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 3,269.00 108.13 3,53,468.80

medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

268 1.14.3 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 500.00 129.35 64,676.25

medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

269 1.14.4 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 2,101.00 174.11 3,65,810.36

medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supply Of ceiling fan sweep 1250mm fusion -50 energy saving fan five star make -

Havells/Almonard/Usha

Installation , testing and commissioning of ceiling fan , including wiring the down

271 1.44 rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated , copper Each 177.00 835.52 1,47,886.16

conductor , single core cable etc as required

272 1098 300mm 1400 rpm heavy duty exhaust fan Make:Almonard/Orient/Usha Each 32.00 1,755.00 56,160.00

Installation of exhaust fan in the existing opening , including making good the

273 1.50.1 damage , connection , testing , commissioning etc. as required - Upto 450 mm Each 32.00 177.71 5,686.80

Supplying, Installation, testing and commissioning of 36/40Watt LED Ceiling

light including cost of material, labour etc., complete.

Supplying, Installation, testing and commissioning of 20/22Watt 4 Feet LED

Tube Light including cost of material, labour etc., complete.

TN SOR, Supplying, Installation, testing and commissioning of 7/9Watt LEB Bulb including

cost of material, labour etc., complete.

Supplying, Installation, testing and commissioning of Geyser/Water Heater

277 1111 including cost of material, labour etc., complete.25 ltrs. Storage water heater- ABS Each 6.00 7,000.00 42,000.00

Make: Almonard/Venus/V-Guard

Supplying and installing following size of perforated Hot dipped Galvanised iron

cable tray (galvanization thickness not less than 50 microns) with perforation not

278 4.6.6 more than 17.5% , in convenient sections , joined with connectors , suspended from Meter 322.40 778.93 2,51,126.23

the ceiling with G.I.suspenders including G.I.bolts & nuts , etc .as required - 450

Supplying and installing following size of perforated Hot dipped galvanised iron

cable tray "bends" (galvanisation not less than 50 microns) with perforation not

279 4.7.6 more than 17.5% , in convenient sections , joined with connectors , suspended from Each 8.00 1,646.42 13,171.38

the ceiling with G.I.suspenders including G.I. bolts & nuts , etc.as required - 450

mm width x 50 mm depth x 2.0 mm thickness

Supplying and installing following size of perforated Hot dipped galvanised iron

cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more

280 4.8.6 than 17.5% , in convenient sections , joined with connectors , suspended from the Each 8.00 1,940.42 15,523.38

ceiling with G.I.suspenders including G.I.bolts & nuts . As required - 450 mm width

x 50 mm depth x 2.0 mm thickness

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying and installing following size of perforated Hot dipped galvanished iron

cable tray "Cross member" (galvanisation not less than 50 microns) with perforation

281 4.9.6 not more than 17.5% , in convenient sections , joined with connectors , suspended Each 8.00 1,940.42 15,523.38

from the ceiling with G.I.suspenders including G.I.bolts & nuts , etc .as required -

450 mm width x 50 mm depth x 2.0 mm thickness

Supplying and installing following size of perforated Hot dipped galvanised iron

cable tray "Reducer" (galvanisation not less than 50 microns) with perforation not

282 4.10.6 more than 17.5% ,in convenient sections , joined with connectiors , suspended from Each 8.00 2,840.62 22,724.94

the ceiling with G.I.suspenders including G.I.bolts & nuts , etc.as required - 450 mm

width x 50 mm depth x 2.0 mm thickness

SUB TOTAL = 51,22,718.26

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and

283 5.2 providing masonry enclosure with cover plate having locking arrangement and Each 4.00 3,815.97 15,263.88

watering pipe etc. with charcoal / coke and salt as required

Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including

284 5.4 accessories, and providing masonry enclosure with cover plate having locking Each 5.00 4,355.34 21,776.70

arrangement and watering pipe of 2.7 meter long etc.but without charcoal / coke

and salt as required

Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for

285 5.7 conductor earth electode , including connection / termination with GI thimble etc. as Rm 80.00 19.63 1,570.20

Supplying and laying 25 mm x 5 mm copper strip at 0.50 metre below ground as

strip earth electrode , including connection / terminating with nut , bolt, spring ,

washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of

brass nut bolt & spring washer spached at 50mm)

Supplying and laying 25 mm x 5 mm G.I strip at 0.50 meter below ground as strip

earth electrode , including connection / terminating with G.I. nut , bolt, spring ,

washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of

G.I.nut bolt & spring washer spached at 50mm)

Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for

connections etc as require

Providing and fixing 25mm x 5mm GI.strip on surface or in recess for connections

etc . as required

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop

earthing as required.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Wiring or light point / fan point / exhaust fan point / call bell per point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed

291 1.10.3 medium class pvc conduit , with modular switch, modular plate, suitable GI box and Point 375.00 590.15 2,21,304.38

earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable etc.as required - GROUP C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium class PVC conduit , 2 way

modular switch , modular plate , suitable GI box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable etc.as required

Wiring for group controlled (looped) light point / fan point / exhaust fan point / call

bell point (without indepdent switch etc.) with 1.5 sq.mm FRLS PVC insulated

293 1.55.3 copper conductor single core cable in surface / recessed PVC conduit , and earthing Point 71.00 337.79 23,982.74

the point 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as

required - Group C

Supply and fixing of meter board suitable for 32A three phase service connection

with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper

TN SOR SD flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of

127,P.NO58 1" thick an either side with painting with suitable bolt and nuts for fixing the TW

plank on wall with earth connection and inter connection with 7/20 PVC insulated

copper wire from EB meter to fuse unit

Supplying and fixing TP sheet steel enclosure on surface / recess along with

295 2.17 16/25/32 A, 415 V "C" curve TP MCB complete with connections , testing and Nos 45.00 789.24 35,515.80

commissioning etc as required

Supplying and fixing following modular switch / socket on the existing modular plate

296 1.24.1 & switch box including connections but excluding modular plate etc. as required - Each 169.00 47.78 8,073.98

Supplying and fixing following modular switch / socket on the existing modular

297 1.24.3 plate & switch box including connections but excluding modular plate etc. as Each 63.00 85.11 5,361.93

required - 15/16 A switch

Supplying and fixing following modular switch / socket on the existing modular

298 1.24.4 plate & switch box including connections but excluding modular plate etc. as Each 169.00 69.65 11,770.01

required - 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch / socket on the existing modular

299 1.24.5 plate & switch box including connections but excluding modular plate etc. as Each 63.00 121.01 7,623.32

required - 6 pin 15/16 A socket outlet

Supplying and fixing following modular switch / socket on the existing modular

300 1.24.6 plate & switch box including connections but excluding modular plate etc. as Each 24.00 73.92 1,774.08

required - Telephone socket outlet

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying and fixing following modular switch / socket on the existing modular

301 1.24.7 plate & switch box including connections but excluding modular plate etc. as Each 15.00 74.14 1,112.06

required - TV antenna socket outlet

Supplying and fixing following size / modules , GI box alongwith modular base &

302 1.27.1 cover plate for modular switches in recess etc. as required - 1 or 2 module (75mm x Each 63.00 140.39 8,844.26

Supplying and fixing following size / modules , GI box alongwith modular base &

303 1.27.2 cover plate for modular switches in recess etc. as required - 3 module (100mm x Each 169.00 154.07 26,036.99

Supplying and fixing following size / modules , GI box alongwith modular base &

304 1.27.3 cover plate for modular switches in recess etc. as required - 4 module (125 mm x 75 Each 78.00 167.22 13,043.16

Supplying and fixing following size / modules , GI box alongwith modular base &

305 1.27.4 cover plate for modular switches in recess etc. as required - 6 module (200 mm x 75 Each 74.00 205.20 15,184.80

Supplying and fixing following size / modules , GI box alongwith modular base &

306 1.27.5 cover plate for modular switches in recess etc. as required - 8 module (125 mm x Each 77.00 235.40 18,125.42

Supplying and fixing following size / modules , GI box alongwith modular base &

307 1.27.6 cover plate for modular switches in recess etc. as required - 12 module (125 mm x Each 32.00 275.64 8,820.48

Supplying and fixing of following sizes of medium class PVC conduit along with

308 1.21.1 accessories in surface/recess including cutting the wall and making good the same Meter 1,074.44 50.22 53,958.38

in case of recessed conduit as required. 20mm

Supplying and fixing of following sizes of medium class PVC conduit along with

309 1.21.2 accessories in surface/recess including cutting the wall and making good the same Meter 1,074.44 60.44 64,941.84

in case of recessed conduit as required. 25mm

Supplying and fixing of following sizes of medium class PVC conduit along with

310 1.21.3 accessories in surface/recess including cutting the wall and making good the same Meter 2,350.00 77.69 1,82,559.75

in case of recessed conduit as required. 32mm

Supplying and fixing of following sizes of medium class PVC conduit along with

311 1.21.4 accessories in surface/recess including cutting the wall and making good the same Meter 1,350.00 99.64 1,34,510.63

in case of recessed conduit as required. 40mm

Supplying and fixing of following sizes of medium class PVC conduit along with

312 1.21.5 accessories in surface/recess including cutting the wall and making good the same Meter 1,200.00 129.78 1,55,736.00

in case of recessed conduit as required. 50mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

313 1.14.1 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 457.22 91.00 41,605.88

medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

314 1.14.2 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 390.00 108.13 42,169.73

medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

315 1.14.3 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 500.00 129.35 64,676.25

medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

316 1.14.4 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 1,012.00 174.11 1,76,201.85

medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supply Of ceiling fan sweep 1250mm fusion -50 energy saving fan five star make -

Havells/Almonard/Usha

Installation , testing and commissioning of ceiling fan , including wiring the down

318 1.44 rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated , copper Each 44.00 835.52 36,762.66

conductor , single core cable etc as required

Supplying, Installation, testing and commissioning of 36/40Watt LED Ceiling light

including cost of material, labour etc., complete.

Supplying, Installation, testing and commissioning of 20/22Watt 4 Feet LED Tube

Light including cost of material, labour etc., complete.

Supplying and installing following size of perforated Hot dipped Galvanised iron

cable tray (galvanization thickness not less than 50 microns) with perforation not

321 4.6.6 more than 17.5% , in convenient sections , joined with connectors , suspended from Meter 206.08 778.93 1,60,521.38

the ceiling with G.I.suspenders including G.I.bolts & nuts , etc .as required - 450

Supplying and installing following size of perforated Hot dipped galvanised iron

cable tray "bends" (galvanisation not less than 50 microns) with perforation not

322 4.7.6 more than 17.5% , in convenient sections , joined with connectors , suspended from Each 8.00 1,646.42 13,171.38

the ceiling with G.I.suspenders including G.I. bolts & nuts , etc.as required - 450

mm width x 50 mm depth x 2.0 mm thickness

Supplying and installing following size of perforated Hot dipped galvanised iron

cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more

323 4.8.6 than 17.5% , in convenient sections , joined with connectors , suspended from the Each 8.00 1,940.42 15,523.38

ceiling with G.I.suspenders including G.I.bolts & nuts . As required - 450 mm width

x 50 mm depth x 2.0 mm thickness

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying and installing following size of perforated Hot dipped galvanished iron

cable tray "Cross member" (galvanisation not less than 50 microns) with perforation

324 4.9.6 not more than 17.5% , in convenient sections , joined with connectors , suspended Each 8.00 1,940.42 15,523.38

from the ceiling with G.I.suspenders including G.I.bolts & nuts , etc .as required -

450 mm width x 50 mm depth x 2.0 mm thickness

Supplying and installing following size of perforated Hot dipped galvanised iron

cable tray "Reducer" (galvanisation not less than 50 microns) with perforation not

325 4.10.6 more than 17.5% ,in convenient sections , joined with connectiors , suspended from Each 8.00 2,840.62 22,724.94

the ceiling with G.I.suspenders including G.I.bolts & nuts , etc.as required - 450 mm

width x 50 mm depth x 2.0 mm thickness

SUB TOTAL = 21,77,433.42

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and

326 5.2 providing masonry enclosure with cover plate having locking arrangement and Each 4.00 3,815.97 15,263.88

watering pipe etc. with charcoal / coke and salt as required

Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including

327 5.4 accessories, and providing masonry enclosure with cover plate having locking Each 2.00 4,355.34 8,710.68

arrangement and watering pipe of 2.7 meter long etc.but without charcoal / coke

and salt as required

Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for

328 5.7 conductor earth electode , including connection / termination with GI thimble etc. as Rm 80.00 19.63 1,570.20

Supplying and laying 25 mm x 5 mm copper strip at 0.50 metre below ground as

strip earth electrode , including connection / terminating with nut , bolt, spring ,

washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of

brass nut bolt & spring washer spached at 50mm)

Supplying and laying 25 mm x 5 mm G.I strip at 0.50 meter below ground as strip

earth electrode , including connection / terminating with G.I. nut , bolt, spring ,

washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of

G.I.nut bolt & spring washer spached at 50mm)

Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for

connections etc as require

Providing and fixing 25mm x 5mm GI.strip on surface or in recess for connections

etc . as required

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop

earthing as required.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Wiring or light point / fan point / exhaust fan point / call bell per point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed

334 1.10.3 medium class pvc conduit , with modular switch, modular plate, suitable GI box and Point 608.00 590.15 3,58,808.16

earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable etc.as required - GROUP C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium class PVC conduit , 2 way

modular switch , modular plate , suitable GI box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable etc.as required

Wiring for group controlled (looped) light point / fan point / exhaust fan point / call

bell point (without indepdent switch etc.) with 1.5 sq.mm FRLS PVC insulated

336 1.55.3 copper conductor single core cable in surface / recessed PVC conduit , and earthing Point 36.00 337.79 12,160.26

the point 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as

required - Group C

Supply and fixing of meter board suitable for 32A three phase service connection

with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper

TN SOR SD flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of

127, P.NO 58 1" thick an either side with painting with suitable bolt and nuts for fixing the TW

plank on wall with earth connection and inter connection with 7/20 PVC insulated

copper wire from EB meter to fuse unit

Supplying and fixing TP sheet steel enclosure on surface / recess along with

338 2.17 16/25/32 A, 415 V "C" curve TP MCB complete with connections , testing and Nos 56.00 789.24 44,197.44

commissioning etc as required

Supplying and fixing following modular switch / socket on the existing modular plate

339 1.24.1 & switch box including connections but excluding modular plate etc. as required - Each 69.00 47.78 3,296.48

Supplying and fixing following modular switch / socket on the existing modular

340 1.24.3 plate & switch box including connections but excluding modular plate etc. as Each 69.00 85.11 5,872.59

required - 15/16 A switch

Supplying and fixing following modular switch / socket on the existing modular

341 1.24.4 plate & switch box including connections but excluding modular plate etc. as Each 69.00 69.65 4,805.51

required - 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch / socket on the existing modular

342 1.24.5 plate & switch box including connections but excluding modular plate etc. as Each 69.00 121.01 8,349.35

required - 6 pin 15/16 A socket outlet

Supplying and fixing following modular switch / socket on the existing modular

343 1.24.6 plate & switch box including connections but excluding modular plate etc. as Each 33.00 73.92 2,439.36

required - Telephone socket outlet

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying and fixing following modular switch / socket on the existing modular

344 1.24.7 plate & switch box including connections but excluding modular plate etc. as Each 27.00 74.14 2,001.71

required - TV antenna socket outlet

Supplying and fixing following size / modules , GI box alongwith modular base &

345 1.27.1 cover plate for modular switches in recess etc. as required - 1 or 2 module (75mm x Each 105.00 140.39 14,740.43

Supplying and fixing following size / modules , GI box alongwith modular base &

346 1.27.2 cover plate for modular switches in recess etc. as required - 3 module (100mm x Each 107.00 154.07 16,484.96

Supplying and fixing following size / modules , GI box alongwith modular base &

347 1.27.3 cover plate for modular switches in recess etc. as required - 4 module (125 mm x 75 Each 107.00 167.22 17,892.54

Supplying and fixing following size / modules , GI box alongwith modular base &

348 1.27.4 cover plate for modular switches in recess etc. as required - 6 module (200 mm x 75 Each 55.00 205.20 11,286.00

Supplying and fixing following size / modules , GI box alongwith modular base &

349 1.27.5 cover plate for modular switches in recess etc. as required - 8 module (125 mm x Each 55.00 235.40 12,946.73

Supplying and fixing following size / modules , GI box alongwith modular base &

350 1.27.6 cover plate for modular switches in recess etc. as required - 12 module (125 mm x Each 55.00 275.64 15,160.20

Supplying and fixing of following sizes of medium class PVC conduit along with

351 1.21.1 accessories in surface/recess including cutting the wall and making good the same Meter 3,546.35 50.22 1,78,097.70

in case of recessed conduit as required. 20mm

Supplying and fixing of following sizes of medium class PVC conduit along with

352 1.21.2 accessories in surface/recess including cutting the wall and making good the same Meter 3,546.35 60.44 2,14,350.26

in case of recessed conduit as required. 25mm

Supplying and fixing of following sizes of medium class PVC conduit along with

353 1.21.3 accessories in surface/recess including cutting the wall and making good the same Meter 1,300.00 77.69 1,00,990.50

in case of recessed conduit as required. 32mm

Supplying and fixing of following sizes of medium class PVC conduit along with

354 1.21.4 accessories in surface/recess including cutting the wall and making good the same Meter 850.00 99.64 84,691.88

in case of recessed conduit as required. 40mm

Supplying and fixing of following sizes of medium class PVC conduit along with

355 1.21.5 accessories in surface/recess including cutting the wall and making good the same Meter 420.00 129.78 54,507.60

in case of recessed conduit as required. 50mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

356 1.14.1 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 471.90 91.00 42,941.72

medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

357 1.14.2 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 483.00 108.13 52,225.58

medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

358 1.14.3 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 700.00 129.35 90,546.75

medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

359 1.14.4 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 1,012.00 174.11 1,76,201.85

medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supply Of ceiling fan sweep 1250mm fusion -50 energy saving fan five star make -

Havells/Almonard/Usha

Installation , testing and commissioning of ceiling fan , including wiring the down

361 1.44 rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated , copper Each 55.00 835.52 45,953.60

conductor , single core cable etc as required

Supplying, Installation, testing and commissioning of 36/40Watt LED Ceiling light

including cost of material, labour etc., complete.

Supplying, Installation, testing and commissioning of 20/22Watt 4 Feet LED Tube

Light including cost of material, labour etc., complete.

Supplying and installing following size of perforated Hot dipped Galvanised iron

cable tray (galvanization thickness not less than 50 microns) with perforation not

364 4.6.6 more than 17.5% , in convenient sections , joined with connectors , suspended from Meter 300.48 778.93 2,34,052.14

the ceiling with G.I.suspenders including G.I.bolts & nuts , etc .as required - 450

Supplying and installing following size of perforated Hot dipped galvanised iron

cable tray "bends" (galvanisation not less than 50 microns) with perforation not

365 4.7.6 more than 17.5% , in convenient sections , joined with connectors , suspended from Each 5.00 1,646.42 8,232.11

the ceiling with G.I.suspenders including G.I. bolts & nuts , etc.as required - 450

mm width x 50 mm depth x 2.0 mm thickness

Supplying and installing following size of perforated Hot dipped galvanised iron

cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more

366 4.8.6 than 17.5% , in convenient sections , joined with connectors , suspended from the Each 5.00 1,940.42 9,702.11

ceiling with G.I.suspenders including G.I.bolts & nuts . As required - 450 mm width

x 50 mm depth x 2.0 mm thickness

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying and installing following size of perforated Hot dipped galvanished iron

cable tray "Cross member" (galvanisation not less than 50 microns) with perforation

367 4.9.6 not more than 17.5% , in convenient sections , joined with connectors , suspended Each 5.00 1,940.42 9,702.11

from the ceiling with G.I.suspenders including G.I.bolts & nuts , etc .as required -

450 mm width x 50 mm depth x 2.0 mm thickness

Supplying and installing following size of perforated Hot dipped galvanised iron

cable tray "Reducer" (galvanisation not less than 50 microns) with perforation not

368 4.10.6 more than 17.5% ,in convenient sections , joined with connectiors , suspended from Each 5.00 2,840.62 14,203.09

the ceiling with G.I.suspenders including G.I.bolts & nuts , etc.as required - 450 mm

width x 50 mm depth x 2.0 mm thickness

SUB TOTAL = 24,74,478.34

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and

369 5.2 providing masonry enclosure with cover plate having locking arrangement and Each 1.00 3,815.97 3,815.97

watering pipe etc. with charcoal / coke and salt as required

Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including

370 5.4 accessories, and providing masonry enclosure with cover plate having locking Each 1.00 4,355.34 4,355.34

arrangement and watering pipe of 2.7 meter long etc.but without charcoal / coke

and salt as required

Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for

371 5.7 conductor earth electode , including connection / termination with GI thimble etc. as Rm 10.00 19.63 196.28

Supplying and laying 25 mm x 5 mm copper strip at 0.50 metre below ground as

strip earth electrode , including connection / terminating with nut , bolt, spring ,

washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of

brass nut bolt & spring washer spached at 50mm)

Supplying and laying 25 mm x 5 mm G.I strip at 0.50 meter below ground as strip

earth electrode , including connection / terminating with G.I. nut , bolt, spring ,

washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of

G.I.nut bolt & spring washer spached at 50mm)

Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for

connections etc as require

Providing and fixing 25mm x 5mm GI.strip on surface or in recess for connections

etc . as required

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop

earthing as required.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Wiring or light point / fan point / exhaust fan point / call bell per point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed

377 1.10.3 medium class pvc conduit , with modular switch, modular plate, suitable GI box and Point 106.00 590.15 62,555.37

earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable etc.as required - GROUP C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium class PVC conduit , 2 way

modular switch , modular plate , suitable GI box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable etc.as required

Wiring for group controlled (looped) light point / fan point / exhaust fan point / call

bell point (without indepdent switch etc.) with 1.5 sq.mm FRLS PVC insulated

379 1.55.3 copper conductor single core cable in surface / recessed PVC conduit , and earthing Point 10.00 337.79 3,377.85

the point 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as

required - Group C

Supply and fixing of meter board suitable for 32A three phase service connection

with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper

TN SOR SD flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of

127, P.NO 58 1" thick an either side with painting with suitable bolt and nuts for fixing the TW

plank on wall with earth connection and inter connection with 7/20 PVC insulated

copper wire from EB meter to fuse unit

Supplying and fixing TP sheet steel enclosure on surface / recess along with

381 2.17 16/25/32 A, 415 V "C" curve TP MCB complete with connections , testing and Nos 40.00 789.24 31,569.60

commissioning etc as required

Supplying and fixing following modular switch / socket on the existing modular plate

382 1.24.1 & switch box including connections but excluding modular plate etc. as required - Each 40.00 47.78 1,911.00

Supplying and fixing following modular switch / socket on the existing modular

383 1.24.3 plate & switch box including connections but excluding modular plate etc. as Each 40.00 85.11 3,404.40

required - 15/16 A switch

Supplying and fixing following modular switch / socket on the existing modular

384 1.24.4 plate & switch box including connections but excluding modular plate etc. as Each 40.00 69.65 2,785.80

required - 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch / socket on the existing modular

385 1.24.5 plate & switch box including connections but excluding modular plate etc. as Each 40.00 121.01 4,840.20

required - 6 pin 15/16 A socket outlet

Supplying and fixing following modular switch / socket on the existing modular

386 1.24.6 plate & switch box including connections but excluding modular plate etc. as Each 40.00 73.92 2,956.80

required - Telephone socket outlet

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying and fixing following modular switch / socket on the existing modular

387 1.24.7 plate & switch box including connections but excluding modular plate etc. as Each 40.00 74.14 2,965.50

required - TV antenna socket outlet

Supplying and fixing following size / modules , GI box alongwith modular base &

388 1.27.1 cover plate for modular switches in recess etc. as required - 1 or 2 module (75mm x Each 40.00 140.39 5,615.40

Supplying and fixing following size / modules , GI box alongwith modular base &

389 1.27.2 cover plate for modular switches in recess etc. as required - 3 module (100mm x Each 40.00 154.07 6,162.60

Supplying and fixing following size / modules , GI box alongwith modular base &

390 1.27.3 cover plate for modular switches in recess etc. as required - 4 module (125 mm x 75 Each 40.00 167.22 6,688.80

Supplying and fixing following size / modules , GI box alongwith modular base &

391 1.27.4 cover plate for modular switches in recess etc. as required - 6 module (200 mm x 75 Each 33.00 205.20 6,771.60

Supplying and fixing following size / modules , GI box alongwith modular base &

392 1.27.5 cover plate for modular switches in recess etc. as required - 8 module (125 mm x Each 15.00 235.40 3,530.93

Supplying and fixing following size / modules , GI box alongwith modular base &

393 1.27.6 cover plate for modular switches in recess etc. as required - 12 module (125 mm x Each 10.00 275.64 2,756.40

Supplying and fixing of following sizes of medium class PVC conduit along with

394 1.21.1 accessories in surface/recess including cutting the wall and making good the same Meter 250.00 50.22 12,555.00

in case of recessed conduit as required. 20mm

Supplying and fixing of following sizes of medium class PVC conduit along with

395 1.21.2 accessories in surface/recess including cutting the wall and making good the same Meter 305.35 60.44 18,456.12

in case of recessed conduit as required. 25mm

Supplying and fixing of following sizes of medium class PVC conduit along with

396 1.21.3 accessories in surface/recess including cutting the wall and making good the same Meter 100.00 77.69 7,768.50

in case of recessed conduit as required. 32mm

Supplying and fixing of following sizes of medium class PVC conduit along with

397 1.21.4 accessories in surface/recess including cutting the wall and making good the same Meter 100.00 99.64 9,963.75

in case of recessed conduit as required. 40mm

Supplying and fixing of following sizes of medium class PVC conduit along with

398 1.21.5 accessories in surface/recess including cutting the wall and making good the same Meter 100.00 129.78 12,978.00

in case of recessed conduit as required. 50mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

399 1.14.1 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 58.19 91.00 5,295.14

medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

400 1.14.2 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 150.00 108.13 16,219.13

medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

401 1.14.3 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 250.00 129.35 32,338.13

medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

402 1.14.4 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 564.00 174.11 98,199.45

medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supply Of ceiling fan sweep 1250mm fusion -50 energy saving fan five star make -

Havells/Almonard/Usha

Installation , testing and commissioning of ceiling fan , including wiring the down

404 1.44 rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated , copper Each 40.00 835.52 33,420.80

conductor , single core cable etc as required

Supplying, Installation, testing and commissioning of 36/40Watt LED Ceiling light

including cost of material, labour etc., complete.

Supplying, Installation, testing and commissioning of 20/22Watt 4 Feet LED Tube

Light including cost of material, labour etc., complete.

Supplying and installing following size of perforated Hot dipped Galvanised iron

cable tray (galvanization thickness not less than 50 microns) with perforation not

407 4.6.6 more than 17.5% , in convenient sections , joined with connectors , suspended from Meter 91.46 778.93 71,240.71

the ceiling with G.I.suspenders including G.I.bolts & nuts , etc .as required - 450

Supplying and installing following size of perforated Hot dipped galvanised iron

cable tray "bends" (galvanisation not less than 50 microns) with perforation not

408 4.7.6 more than 17.5% , in convenient sections , joined with connectors , suspended from Each 1.00 1,646.42 1,646.42

the ceiling with G.I.suspenders including G.I. bolts & nuts , etc.as required - 450

mm width x 50 mm depth x 2.0 mm thickness

Supplying and installing following size of perforated Hot dipped galvanised iron

cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more

409 4.8.6 than 17.5% , in convenient sections , joined with connectors , suspended from the Each 1.00 1,940.42 1,940.42

ceiling with G.I.suspenders including G.I.bolts & nuts . As required - 450 mm width

x 50 mm depth x 2.0 mm thickness

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying and installing following size of perforated Hot dipped galvanished iron

cable tray "Cross member" (galvanisation not less than 50 microns) with perforation

410 4.9.6 not more than 17.5% , in convenient sections , joined with connectors , suspended Each 1.00 1,940.42 1,940.42

from the ceiling with G.I.suspenders including G.I.bolts & nuts , etc .as required -

450 mm width x 50 mm depth x 2.0 mm thickness

Supplying and installing following size of perforated Hot dipped galvanised iron

cable tray "Reducer" (galvanisation not less than 50 microns) with perforation not

411 4.10.6 more than 17.5% ,in convenient sections , joined with connectiors , suspended from Each 1.00 2,840.62 2,840.62

the ceiling with G.I.suspenders including G.I.bolts & nuts , etc.as required - 450 mm

width x 50 mm depth x 2.0 mm thickness

SUB TOTAL = 7,32,504.90

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and

412 5.2 providing masonry enclosure with cover plate having locking arrangement and Each 1.00 3,815.97 3,815.97

watering pipe etc. with charcoal / coke and salt as required

Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including

413 5.4 accessories, and providing masonry enclosure with cover plate having locking Each 1.00 4,355.34 4,355.34

arrangement and watering pipe of 2.7 meter long etc.but without charcoal / coke

and salt as required

Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for

414 5.7 conductor earth electode , including connection / termination with GI thimble etc. as Rm 10.00 19.63 196.28

Supplying and laying 25 mm x 5 mm copper strip at 0.50 metre below ground as

strip earth electrode , including connection / terminating with nut , bolt, spring ,

washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of

brass nut bolt & spring washer spached at 50mm)

Supplying and laying 25 mm x 5 mm G.I strip at 0.50 meter below ground as strip

earth electrode , including connection / terminating with G.I. nut , bolt, spring ,

washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of

G.I.nut bolt & spring washer spached at 50mm)

Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for

connections etc as require

Providing and fixing 25mm x 5mm GI.strip on surface or in recess for connections

etc . as required

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop

earthing as required.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Wiring or light point / fan point / exhaust fan point / call bell per point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed

420 1.10.3 medium class pvc conduit , with modular switch, modular plate, suitable GI box and Point 22.00 590.15 12,983.19

earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable etc.as required - GROUP C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium class PVC conduit , 2 way

modular switch , modular plate , suitable GI box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable etc.as required

Wiring for group controlled (looped) light point / fan point / exhaust fan point / call

bell point (without indepdent switch etc.) with 1.5 sq.mm FRLS PVC insulated

422 1.55.3 copper conductor single core cable in surface / recessed PVC conduit , and earthing Point 2.00 337.79 675.57

the point 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as

required - Group C

Supply and fixing of meter board suitable for 32A three phase service connection

with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper

TN SOR SD flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of

127, P.NO 58 1" thick an either side with painting with suitable bolt and nuts for fixing the TW

plank on wall with earth connection and inter connection with 7/20 PVC insulated

copper wire from EB meter to fuse unit

Supplying and fixing TP sheet steel enclosure on surface / recess along with

424 2.17 16/25/32 A, 415 V "C" curve TP MCB complete with connections , testing and Nos 1.00 789.24 789.24

commissioning etc as required

Supplying and fixing following modular switch / socket on the existing modular plate

425 1.24.1 & switch box including connections but excluding modular plate etc. as required - Each 2.00 47.78 95.55

Supplying and fixing following modular switch / socket on the existing modular

426 1.24.3 plate & switch box including connections but excluding modular plate etc. as Each 2.00 85.11 170.22

required - 15/16 A switch

Supplying and fixing following modular switch / socket on the existing modular

427 1.24.4 plate & switch box including connections but excluding modular plate etc. as Each 2.00 69.65 139.29

required - 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch / socket on the existing modular

428 1.24.5 plate & switch box including connections but excluding modular plate etc. as Each 2.00 121.01 242.01

required - 6 pin 15/16 A socket outlet

Supplying and fixing following modular switch / socket on the existing modular

429 1.24.6 plate & switch box including connections but excluding modular plate etc. as Each 2.00 73.92 147.84

required - Telephone socket outlet

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying and fixing following modular switch / socket on the existing modular

430 1.24.7 plate & switch box including connections but excluding modular plate etc. as Each 1.00 74.14 74.14

required - TV antenna socket outlet

Supplying and fixing following size / modules , GI box alongwith modular base &

431 1.27.1 cover plate for modular switches in recess etc. as required - 1 or 2 module (75mm x Each 2.00 140.39 280.77

Supplying and fixing following size / modules , GI box alongwith modular base &

432 1.27.2 cover plate for modular switches in recess etc. as required - 3 module (100mm x Each 2.00 154.07 308.13

Supplying and fixing following size / modules , GI box alongwith modular base &

433 1.27.3 cover plate for modular switches in recess etc. as required - 4 module (125 mm x 75 Each 2.00 167.22 334.44

Supplying and fixing following size / modules , GI box alongwith modular base &

434 1.27.4 cover plate for modular switches in recess etc. as required - 6 module (200 mm x 75 Each 2.00 205.20 410.40

Supplying and fixing following size / modules , GI box alongwith modular base &

435 1.27.5 cover plate for modular switches in recess etc. as required - 8 module (125 mm x Each 11.00 235.40 2,589.35

Supplying and fixing following size / modules , GI box alongwith modular base &

436 1.27.6 cover plate for modular switches in recess etc. as required - 12 module (125 mm x Each 6.00 275.64 1,653.84

Supplying and fixing of following sizes of medium class PVC conduit along with

437 1.21.1 accessories in surface/recess including cutting the wall and making good the same Meter 59.10 50.22 2,968.00

in case of recessed conduit as required. 20mm

Supplying and fixing of following sizes of medium class PVC conduit along with

438 1.21.2 accessories in surface/recess including cutting the wall and making good the same Meter 50.00 60.44 3,022.13

in case of recessed conduit as required. 25mm

Supplying and fixing of following sizes of medium class PVC conduit along with

439 1.21.3 accessories in surface/recess including cutting the wall and making good the same Meter 50.00 77.69 3,884.25

in case of recessed conduit as required. 32mm

Supplying and fixing of following sizes of medium class PVC conduit along with

440 1.21.4 accessories in surface/recess including cutting the wall and making good the same Meter 25.00 99.64 2,490.94

in case of recessed conduit as required. 40mm

Supplying and fixing of following sizes of medium class PVC conduit along with

441 1.21.5 accessories in surface/recess including cutting the wall and making good the same Meter 25.00 129.78 3,244.50

in case of recessed conduit as required. 50mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

442 1.14.1 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 17.00 91.00 1,546.96

medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

443 1.14.2 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 40.00 108.13 4,325.10

medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

444 1.14.3 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 25.00 129.35 3,233.81

medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

445 1.14.4 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 25.00 174.11 4,352.81

medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supply of ceiling fan sweep 1250mm fusion -50 energy saving fan five star make -

Havells/Almonard/Usha

Installation , testing and commissioning of ceiling fan , including wiring the down

447 1.44 rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated , copper Each 4.00 835.52 3,342.08

conductor , single core cable etc as required

448 1098 300mm 1400 rpm heavy duty exhaust fan Make:Almonard/Orient/Usha Each 1.00 1,755.00 1,755.00

Installation of exhaust fan in the existing opening , including making good the

449 1.50.1 damage , connection , testing , commissioning etc. as required - Upto 450 mm Each 1.00 177.71 177.71

Supplying, Installation, testing and commissioning of 36/40Watt LED Ceiling light

including cost of material, labour etc., complete.

Supplying, Installation, testing and commissioning of 20/22Watt 4 Feet LED Tube

Light including cost of material, labour etc., complete.

TN SOR, Supplying, Installation, testing and commissioning of 7/9Watt LEB Bulb including

cost of material, labour etc., complete.

SUB TOTAL = 96,923.16

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and

453 5.2 providing masonry enclosure with cover plate having locking arrangement and Each 1.00 3,815.97 3,815.97

watering pipe etc. with charcoal / coke and salt as required

Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including

454 5.4 accessories, and providing masonry enclosure with cover plate having locking Each 1.00 4,355.34 4,355.34

arrangement and watering pipe of 2.7 meter long etc.but without charcoal / coke

and salt as required

Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for

455 5.7 conductor earth electode , including connection / termination with GI thimble etc. as Rm 10.00 19.63 196.28

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying and laying 25 mm x 5 mm copper strip at 0.50 metre below ground as

strip earth electrode , including connection / terminating with nut , bolt, spring ,

washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of

brass nut bolt & spring washer spached at 50mm)

Supplying and laying 25 mm x 5 mm G.I strip at 0.50 meter below ground as strip

earth electrode , including connection / terminating with G.I. nut , bolt, spring ,

washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of

G.I.nut bolt & spring washer spached at 50mm)

Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for

connections etc as require

Providing and fixing 25mm x 5mm GI.strip on surface or in recess for connections

etc . as required

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop

earthing as required.

Wiring or light point / fan point / exhaust fan point / call bell per point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed

461 1.10.3 medium class pvc conduit , with modular switch, modular plate, suitable GI box and Point 22.00 590.15 12,983.19

earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable etc.as required - GROUP C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium class PVC conduit , 2 way

modular switch , modular plate , suitable GI box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable etc.as required

Wiring for group controlled (looped) light point / fan point / exhaust fan point / call

bell point (without indepdent switch etc.) with 1.5 sq.mm FRLS PVC insulated

463 1.55.3 copper conductor single core cable in surface / recessed PVC conduit , and earthing Point 5.00 337.79 1,688.93

the point 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as

required - Group C

Supply and fixing of meter board suitable for 32A three phase service connection

with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper

TN SOR SD flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of

127, P.NO 58 1" thick an either side with painting with suitable bolt and nuts for fixing the TW

plank on wall with earth connection and inter connection with 7/20 PVC insulated

copper wire from EB meter to fuse unit

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying and fixing TP sheet steel enclosure on surface / recess along with

465 2.17 16/25/32 A, 415 V "C" curve TP MCB complete with connections , testing and Nos 1.00 789.24 789.24

commissioning etc as required

Supplying and fixing following modular switch / socket on the existing modular plate

466 1.24.1 & switch box including connections but excluding modular plate etc. as required - Each 2.00 47.78 95.55

Supplying and fixing following modular switch / socket on the existing modular

467 1.24.3 plate & switch box including connections but excluding modular plate etc. as Each 2.00 85.11 170.22

required - 15/16 A switch

Supplying and fixing following modular switch / socket on the existing modular

468 1.24.4 plate & switch box including connections but excluding modular plate etc. as Each 2.00 69.65 139.29

required - 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch / socket on the existing modular

469 1.24.5 plate & switch box including connections but excluding modular plate etc. as Each 2.00 121.01 242.01

required - 6 pin 15/16 A socket outlet

Supplying and fixing following modular switch / socket on the existing modular

470 1.24.6 plate & switch box including connections but excluding modular plate etc. as Each 2.00 73.92 147.84

required - Telephone socket outlet

Supplying and fixing following modular switch / socket on the existing modular

471 1.24.7 plate & switch box including connections but excluding modular plate etc. as Each 1.00 74.14 74.14

required - TV antenna socket outlet

Supplying and fixing following size / modules , GI box alongwith modular base &

472 1.27.1 cover plate for modular switches in recess etc. as required - 1 or 2 module (75mm x Each 2.00 140.39 280.77

Supplying and fixing following size / modules , GI box alongwith modular base &

473 1.27.2 cover plate for modular switches in recess etc. as required - 3 module (100mm x Each 2.00 154.07 308.13

Supplying and fixing following size / modules , GI box alongwith modular base &

474 1.27.3 cover plate for modular switches in recess etc. as required - 4 module (125 mm x 75 Each 2.00 167.22 334.44

Supplying and fixing following size / modules , GI box alongwith modular base &

475 1.27.4 cover plate for modular switches in recess etc. as required - 6 module (200 mm x 75 Each 2.00 205.20 410.40

Supplying and fixing following size / modules , GI box alongwith modular base &

476 1.27.5 cover plate for modular switches in recess etc. as required - 8 module (125 mm x Each 11.00 235.40 2,589.35

Supplying and fixing following size / modules , GI box alongwith modular base &

477 1.27.6 cover plate for modular switches in recess etc. as required - 12 module (125 mm x Each 6.00 275.64 1,653.84

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying and fixing of following sizes of medium class PVC conduit along with

478 1.21.1 accessories in surface/recess including cutting the wall and making good the same Meter 59.10 50.22 2,968.00

in case of recessed conduit as required. 20mm

Supplying and fixing of following sizes of medium class PVC conduit along with

479 1.21.2 accessories in surface/recess including cutting the wall and making good the same Meter 50.00 60.44 3,022.13

in case of recessed conduit as required. 25mm

Supplying and fixing of following sizes of medium class PVC conduit along with

480 1.21.3 accessories in surface/recess including cutting the wall and making good the same Meter 50.00 77.69 3,884.25

in case of recessed conduit as required. 32mm

Supplying and fixing of following sizes of medium class PVC conduit along with

481 1.21.4 accessories in surface/recess including cutting the wall and making good the same Meter 25.00 99.64 2,490.94

in case of recessed conduit as required. 40mm

Supplying and fixing of following sizes of medium class PVC conduit along with

482 1.21.5 accessories in surface/recess including cutting the wall and making good the same Meter 25.00 129.78 3,244.50

in case of recessed conduit as required. 50mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

483 1.14.1 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 17.00 91.00 1,546.96

medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

484 1.14.2 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 30.00 108.13 3,243.83

medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

485 1.14.3 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 25.00 129.35 3,233.81

medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

486 1.14.4 FRLS PVC insulated copper conductor, single core cable in surface/ recessed Meter 25.00 174.11 4,352.81

medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supply of ceiling fan sweep 1250mm fusion -50 energy saving fan five star make -

Havells/Almonard/Usha

Installation , testing and commissioning of ceiling fan , including wiring the down

488 1.44 rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated , copper Each 5.00 835.52 4,177.58

conductor , single core cable etc as required

489 1098 300mm 1400 rpm heavy duty exhaust fan Make:Almonard/Orient/Usha Each 4.00 1,755.00 7,020.00

Installation of exhaust fan in the existing opening , including making good the

490 1.50.1 damage , connection , testing , commissioning etc. as required - Upto 450 mm Each 4.00 177.71 710.85

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Supplying, Installation, testing and commissioning of 36/40Watt LED Ceiling light

including cost of material, labour etc., complete.

Supplying, Installation, testing and commissioning of 20/22Watt 4 Feet LED Tube

Light including cost of material, labour etc., complete.

SUB TOTAL = 1,08,481.26

OUTDOOR ELECTRICAL WORKS

Supplying & Transportation of 11 KV 3CX185 Sqmm XLPE HT Cable from 11 KV

outdoor panel to 11 KV LBS panel and then to 630 KVA transformer.

Supplying & Transportation of 11 KV 3CX185 Sqmm XLPE HT Cable jointing kit with

MAIN MV PANEL 1: Fabrication, Supply, Installation, Testing and Commissioning

of Cubicle Panel board, Floor mounted fabricated free standing made out of 16

SWG CRCA Sheet, Compartmentalized with hinges door, dust & vermin proof

powder coated of approved shades. The doors and partition fabricated 18SWG

CRCA sheet. A set of RYB indication lamps , Multifunction meter. Aluminium busbars

of adaquate sizes 2 Nos earth terminals etc., complete.

EB Incomer : 630 AMPS 4 Pole ACB With S/C, E/F Portections MDO Type

DG Incomer:400 AMPS 4 Pole MCCB With S/C, E/F Portections

Busbar: 630A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars

shall have half the capacity of phase busbars

2Nos 160 A TPN MCCB with releases

3Nos 400 A TPN MCCB with releases

Fabrication, Supply, Installation, Testing and Commissioning of Cubicle Panel

board, Floor mounted fabricated out of 16 SWG CRCA Sheet, Compartmentalized

with hinges door, dust & vermin proof powder coated of approved shades. The

doors and partition fabricated 18SWG CRCA sheet. S set of RYB indication lamps ,

ammeter, voltmeter with selector switches , aluminium busbars with suitable rating

2 Nos earth terminals etc., complete. CAPACITOR PANEL -50 KVAR

Incomer: 1 No 400A TPN MCCB- 36KA

Capacitors: 10KVAR-2Nos,5KVAR -6Nos

Busbar: 400A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars

shall have half the capacity of phase busbars

4Nos 32A TPN 25KA MCCB and AC 20A Contactor with ON/OFF Push/Indication

lamp and 10 KVAR MDXL Capacitor

2Nos 32A TPN 25KA MCCB and AC 16A Contactor with ON/OFF Push/Indication

lamp and 5 KVAR MDXL Capacitor

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Note: 1 No 10KVAR Capacitor should be connected directly to the main (Busbars) to

avoid reduction in PF

MAIN MV PANEL 2: Fabrication, Supply, Installation, Testing and Commissioning

of Cubicle Panel board, Floor mounted fabricated free standing made out of 16

SWG CRCA Sheet, Compartmentalized with hinges door, dust & vermin proof

powder coated of approved shades. The doors and partition fabricated 18SWG

CRCA sheet. A set of RYB indication lamps , Multifunction meter. Aluminium busbars

of adaquate sizes 2 Nos earth terminals etc., complete.

EB Incomer : 800 AMPS 4 Pole Acb With S/C, E/F Portections

DG Incomer:800 AMPS 4 Pole Acb With S/C, E/F Portections

Busbar: 800A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars

shall have half the capacity of phase busbars

5Nos 100 A TPN MCCB with releases

4 Nos 160 A TPN MCCB with releases

2 Nos 400 A TPN MCCB with releases

1 Nos 630 A TPN MCCB with releases

CAPACITOR PANEL - 150KVAR: Fabrication, Supply, Installation, Testing and

Commissioning of Cubicle Panel board, Floor mounted fabricated free standing

made out of 16 SWG CRCA Sheet, Compartmentalized with hinges door, dust &

vermin proof powder coated of approved shades. The doors and partition fabricated

18SWG CRCA sheet. A set of RYB indication lamps , Multifunction meter. Aluminium

busbars of adaquate sizes 2 Nos earth terminals etc., complete.

EB Incomer: 1 No 630A TPN MCCB

Capacitor: 25 KVAR Capacitor-3 Nos,20KVAR Capacitor-2 No15KVAR Capacitor-2

Nos, , 5KVAR Capacitor -1 Nos

498 APPC Busbar: 630A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral Set 1 4,10,640.00 4,10,640.00

busbars shall have half the capacity of phase busbars

APPC Outgoing :

3 Set 100A TPN 25KA MCCB and AC 70A contractor with ON/OFF push /indication

lamp and 25 KVAR Capacitor

2 Set 63A TPN 25KA MCCB and AC 55A contractor with ON/OFF push /indication

lamp and 15 KVAR Capacitor

2 Set 32A TPN 25KA MCCB and AC 40A contractor with ON/OFF push /indication

lamp and 10 KVAR Capacitor

1Set 32A TPN 25KA MCCB and AC 16A contractor with ON/OFF push /indication

lamp and 5 KVAR Capacitor

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

MLCP PANEL: Fabrication, Supply, Installation, Testing and Commissioning of

Cubicle Panel board, Floor mounted fabricated free standing made out of 16 SWG

CRCA Sheet, Compartmentalized with hinges door, dust & vermin proof powder

coated of approved shades. The doors and partition fabricated 18SWG CRCA sheet.

499 A set of RYB indication lamps , Multifunction meter. Aluminium busbars of adaquate Set 1 2,32,460.00 2,32,460.00

sizes 2 Nos earth terminals etc., complete.

EB Incomer : 1 No 100A TPN MCCB

Outgoing : 6 Nos 63A TPN MCCB with releases

Busbar: 100A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars

shall have half the capacity of phase busbars

MAIN BLOCK-1 PANEL: Fabrication, Supply, Installation, Testing and

Commissioning of Cubicle Panel board, Floor mounted fabricated free standing

made out of 16 SWG CRCA Sheet, Compartmentalized with hinges door, dust &

vermin proof powder coated of approved shades. The doors and partition fabricated

500 18SWG CRCA sheet. A set of RYB indication lamps , Multifunction meter. Aluminium Set 1 3,20,960.00 3,20,960.00

busbars of adaquate sizes 2 Nos earth terminals etc., complete.

EB Incomer : 1 No 160A TPN MCCB

Outgoing : 10 Nos 63 A TPN MCCB with releases

Busbar: 160A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars

shall have half the capacity of phase busbars

MAIN BLOCK-2 PANEL: Fabrication, Supply, Installation, Testing and

Commissioning of Cubicle Panel board, Floor mounted fabricated free standing

made out of 16 SWG CRCA Sheet, Compartmentalized with hinges door, dust &

vermin proof powder coated of approved shades. The doors and partition fabricated

501 18SWG CRCA sheet. A set of RYB indication lamps , Multifunction meter. Aluminium Set 1 3,20,960.00 3,20,960.00

busbars of adaquate sizes 2 Nos earth terminals etc., complete.

EB Incomer: 1 No 160A TPN MCCB

Outgoing : 10 Nos 63 A TPN MCCB with releases

Busbar: 160A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars

shall have half the capacity of phase busbars

WHOLE SALE SHOP PANEL: Fabrication, Supply, Installation, Testing and

Commissioning of Cubicle Panel board, Floor mounted fabricated free standing

made out of 16 SWG CRCA Sheet, Compartmentalized with hinges door, dust &

vermin proof powder coated of approved shades. The doors and partition fabricated

502 18SWG CRCA sheet. A set of RYB indication lamps , Multifunction meter. Aluminium Set 1 1,55,760.00 1,55,760.00

busbars of adaquate sizes 2 Nos earth terminals etc., complete.

Incomer: 1 No 63 A TPN MCCB

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Outgoing: 5 Nos 63A TPN MCCB

Busbar: 63A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars shall

have half the capacity of phase busbars

COLD STORAGE PANEL: Fabrication, Supply, Installation, Testing and

Commissioning of Cubicle Panel board, Floor mounted fabricated free standing

made out of 16 SWG CRCA Sheet, Compartmentalized with hinges door, dust &

vermin proof powder coated of approved shades. The doors and partition fabricated

503 18SWG CRCA sheet. A set of RYB indication lamps , Multifunction meter. Aluminium Set 1 2,72,580.00 2,72,580.00

busbars of adaquate sizes 2 Nos earth terminals etc., complete.

Incomer: 1 No 160A TPN MCCB

Outgoing: 6 Nos 63A TPN MCCB

Busbar: 160A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars

shall have half the capacity of phase busbars

MLCP EB METERING PANEL-1: Fabrication, Supply, Installation, Testing and

Commissioning of Cubicle Panel board, Floor mounted fabricated free standing

made out of 16 SWG CRCA Sheet, Compartmentalized with hinges door, dust &

vermin proof powder coated of approved shades. The doors and partition fabricated

18SWG CRCA sheet. A set of RYB indication lamps , Multifunction meter. Aluminium

busbars of adaquate sizes 2 Nos earth terminals etc., complete.

Incomer: 1 No 63A TNP MCB

Busbar: 63A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars shall

504 have half the capacity of phase busbars Set 1 1,25,080.00 1,25,080.00

a) Compartment type outgoing 1 Nos-3 Phase. Each outgoing shall have 1 metering

portion with a provision of 6mm thick hylem sheet to fix the E.B meter (3 Phase). 1

switch compartment shall have 3 Nos 32A porcelain fuse carriers, 1 No 32A TPN

a) Compartment type outgoing 18Nos-1 Phase. Each outgoing shall have 1 metering

portion with a provision of 6mm thick hylem sheet to fix the E.B meter (1 Phase). 1

switch compartment shall have 2 Nos 16A porcelain fuse carriers, 1 No 16A DP MCB

MLCP EB METERING PANEL-2: Fabrication, Supply, Installation, Testing and

Commissioning of Cubicle Panel board, Floor mounted fabricated free standing

made out of 16 SWG CRCA Sheet, Compartmentalized with hinges door, dust &

vermin proof powder coated of approved shades. The doors and partition fabricated

18SWG CRCA sheet. A set of RYB indication lamps , Multifunction meter. Aluminium

busbars of adaquate sizes 2 Nos earth terminals etc., complete.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

Busbar: 63A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars shall

have half the capacity of phase busbars

a) Compartment type outgoing 18Nos-1 Phase. Each outgoing shall have 1 metering

portion with a provision of 6mm thick hylem sheet to fix the E.B meter (1 Phase). 1

switch compartment shall have 2 Nos 16A porcelain fuse carriers, 1 No 16A DP MCB

MLCP EB METERING PANEL-3 (For First floor and Second floor): Fabrication,

Supply, Installation, Testing and Commissioning of Cubicle Panel board, Floor

mounted fabricated free standing made out of 16 SWG CRCA Sheet,

Compartmentalized with hinges door, dust & vermin proof powder coated of

approved shades. The doors and partition fabricated 18SWG CRCA sheet. A set of

RYB indication lamps , Multifunction meter. Aluminium busbars of adaquate sizes 2

Nos earth terminals etc., complete.

Busbar: 63A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars shall

have half the capacity of phase busbars

a) Compartment type outgoing 9Nos-1 Phase. Each outgoing shall have 1 metering

portion with a provision of 6mm thick hylem sheet to fix the E.B meter (1 Phase). 1

switch compartment shall have 2 Nos 16A porcelain fuse carriers, 1 No 16A DP MCB

MAIN MARKET BLOCK 1&2 EB METERING PANEL-1: Fabrication, Supply,

Installation, Testing and Commissioning of Cubicle Panel board, Floor mounted

fabricated free standing made out of 16 SWG CRCA Sheet, Compartmentalized with

hinges door, dust & vermin proof powder coated of approved shades. The doors

and partition fabricated 18SWG CRCA sheet. A set of RYB indication lamps ,

Multifunction meter. Aluminium busbars of adaquate sizes 2 Nos earth terminals

Incomer:1 No of 63A TPN MCCB, 1 set of RYB Indication lamp ,1 No multi function

Busbar: 63A TPN Alumnium Busbars

a) Compartment type outgoing 20 Nos-Single Phase. Each outgoing shall have 1

metering portion with a provision of 6mm thick hylem sheet to fix the E.B meter (1

Phase). 1 switch compartment shall have 2 Nos 16A porcelain fuse carriers, 1 No

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06

S.No Item No Description of Item Unit Quantity Unit Rate Amount

MAIN MARKET BLOCK 1&2 EB METERING PANEL-2: Fabrication, Supply,

Installation, Testing and Commissioning of Cubicle Panel board, Floor mounted

fabricated free standing made out of 16 SWG CRCA Sheet, Compartmentalized with

hinges door, dust & vermin proof powder coated of approved shades. The doors

and partition fabricated 18SWG CRCA sheet. A set of RYB indication lamps ,

Multifunction meter. Aluminium busbars of adaquate sizes 2 Nos earth terminals

etc., complete.

Incomer: 1 No of 63A TPN MCCB, 1 set of RYB Indication lamp ,1 No multi function

Busbar: 63A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars shall

have half the capacity of phase busbars

a) Compartment type outgoing 22 Nos-Single Phase. Each outgoing shall have 1

metering portion with a provision of 6mm thick hylem sheet to fix the E.B meter (1

Phase). 1 switch compartment shall have 2 Nos 16A porcelain fuse carriers, 1 No

MAIN MARKET BLOCK 1&2 EB METERING PANEL-3: Fabrication, Supply,

Installation, Testing and Commissioning of Cubicle Panel board, Floor mounted

fabricated free standing made out of 16 SWG CRCA Sheet, Compartmentalized with

hinges door, dust & vermin proof powder coated of approved shades. The doors

and partition fabricated 18SWG CRCA sheet. A set of RYB indication lamps ,

Multifunction meter. Aluminium busbars of adaquate sizes 2 Nos earth terminals

etc., complete.

Incomer: 1 No of 63A TPN MCCB, 1 set of RYB Indication lamp ,1 No multi function

Busbar: 63A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars shall

have half the capacity of phase busbars

a) Compartment type outgoing 23 Nos-Single Phase. Each outgoing shall have 1

metering portion with a provision of 6mm thick hylem sheet to fix the E.B meter (1

Phase). 1 switch compartment shall have 2 Nos 16A porcelain fuse carriers, 1 No

MAIN MARKET BLOCK 1&2 EB METERING PANEL-4: Fabrication, Supply,

Installation, Testing and Commissioning of Cubicle Panel board, Floor mounted

fabricated free standing made out of 16 SWG CRCA Sheet, Compartmentalized with

hinges door, dust & vermin proof powder coated of approved shades. The doors

and partition fabricated 18SWG CRCA sheet. A set of RYB indication lamps ,

Multifunction meter. Aluminium busbars of adaquate sizes 2 Nos earth terminals

etc., complete.