SPECIAL REPAIRS TO BLDG NO T-2 (NCC SINGLE JCOS ACCN), BOUNDARY WALL AT TILOTTAMMA, GI/CI/PVC PIPE LINES AND FITTINGS IN SEWAGE SHAFTS OF BUILDING NO P-103, WATER SUPPLY DISTRIBUTION FROM MAIN PUMP HOUSE TO VARIOUS PUMP HOUSES, GI WATER MAINS, CONN

Amount

Dismantling of chain link fencing alongwith RCC Posts embedded in PCC complete all as specified and directed

S & F RCC M30 Grade Precast concrete post of size 150mm x 150mm x 2100 mm height , having two grooves of size 45 x 28 mm so as to receive 7 Nos of panels having size of 1500 mm x 300 mm x 40 mm thickness ( 6 Plain Panel at bottom + 1 Design Panel at top as approved by Engr-in Charge/GE). The post shall be reinforced with 4 Nos of 8 mm dia bars with 4 mm dia stirrups @ 150 mm C/C, panels shall be reinforced with 4 Nos of longitudinal bars of 6mm dia plain steel & 6mm plain MS Stirrups @ 150 C/C all welded. The post shall be fixed to the ground by digging a hole if 50mm x 450mm x 600 mm and filled with PCC 1:3:6 after the post should be aligned in these holes. The post will be erected @1.615m C/C. Height of the pillar shall be 2700mm (600mm below the ground and 2100 mm above the GL) complete all as specified.

M&L for preparing Newly concrete / plastered walls/ceilings surfaces and applying two coat of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer and scaffolding where required at any height for external painting complete all as specified.

Dismantling 100 mm internal dia cast iron pipe, jointed in cement mortar upto 04 storeys including all scafolding arrangments complete all as specified and directed.

Dismantling 100 mm internal dia cast iron pipe, jointed in cement mortar from 05 to 08 storeys including all scafolding arrangment complete all as specified and directed.

Dismantling 100 mm internal dia cast iron pipe, jointed in cement mortar from 09 to 12 storeys including all scafolding arrangment complete all as specified and directed.

Dismantling 75 mm internal dia cast iron pipe, jointed in cement mortar upto 04 storeys including all scafolding arrangments complete all as specified and directed.

Dismantling 75 mm internal dia cast iron pipe, jointed in cement mortar from 05 to 08 storeys including all scafolding arrangment complete all as specified and directed.

Dismantling 75 mm internal dia cast iron pipe, jointed in cement mortar from 09 to 12 storeys including all scafolding arrangment complete all as specified and directed.

Dismantling of 75 mm dia PVC(SWR) pipe upto 04 storeys including all scafloding arrangments complete all as specified and directed

Dismantling of 75 mm dia PVC(SWR) pipe upto 05 to 08 storeys including all scafloding arrangments complete all as specified and directed

Dismantling of 75 mm dia PVC(SWR) pipe upto 09 to 12 storeys including all scafloding arrangments complete all as specified and directed

Dismantling of 110 mm dia PVC(SWR) pipe upto 04 storeys including all scafloding arrangments complete all as specified and directed

Dismantling of 110 mm dia PVC(SWR) pipe upto 05 to 08 storeys including all scafloding arrangments complete all as specified and directed

Dismantling of 110 mm dia PVC(SWR) pipe upto 09 to 12 storeys including all scafloding arrangments complete all as specified and directed

Supply and fix for 75 mm bore PVC pipe stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays,including bolts and nuts and securing ends of stay to wall or roof including scafolding to work at any heightcomplete all as specified and directed.

Supply and fix for 110 mm bore PVC pipe stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays,including bolts and nuts and securing ends of stay to wall or roof complete all as specified and directed.

Supply and fix for 150 mm bore PVC pipe stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays,including bolts and nuts and securing ends of stay to wall or roof complete all as specified and directed.

S&F in repairs 150 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls upto 04 storeys including all scafloding arrangments complete all as specified and directed.

S&F in repairs 150 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls upto 05 to 08 storeys including all scafloding arrangments complete all as specified and directed.

S&F in repairs 150 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls upto 09 to 12 storeys including all scafloding arrangments complete all as specified and directed.

S&F 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls upto 04 storeys including all scafloding arrangments complete all as specified and directed.

S&F 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls upto 05 to 08 storeys including all scafloding arrangments complete all as specified and directed.

S&F 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls upto 09 to 12 storeys including all scafloding arrangments complete all as specified and directed.

S&F 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls 04 storeys including all scafloding arrangments complete all as specified and directed.

S&F 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls 05 to 08 storeys including all scafloding arrangments complete all as specified and directed.

S&F 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls 09 to 12 storeys including all scafloding arrangments complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends with access doors any radius at any height including scaffolding complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends with access doors any radius at any height including scaffolding complete all as specified and directed..

S&F 150 mm dia PVC (SWR) bends with access doors any radius at any height including scaffolding complete all as specified and directed..

S&F 75 mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access door at any height including scaffolding complete all as specified and directed.

S&F 110 mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access door at any height including scaffolding complete all as specified and directed.

S&F 110 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door at any height including scaffolding complete all as specified and directed.

S&F 75 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door at any height including scaffolding complete all as specified and directed.

S&F 110 mm dia PVC (SWR) branch piece, double (double Y) equal or unequal provided with access door at any height including scaffolding complete all as specified and directed.

S&F 75 mm dia PVC (SWR) branch piece, double (double Y) equal or unequal provided with access door at any height including scaffolding complete all as specified and directed.

S&F 75 mm dia PVC (SWR) vent cowl at any height including scaffolding complete all as specified and directed.

S&F 110 mm dia PVC (SWR) vent cowl at any height including scaffolding complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia bore upto 4 storeys including all scaffolding arrangments complete all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia bore upto 05 to 08 storeys including all scaffolding arrangments complete all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia bore upto 09 to 12 storeys including all scaffolding arrangments complete all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore upto 4 storeys including all scaffolding arrangments complete all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,20 mm dia bore upto 05 to 08 storeys including all scaffolding arrangments complete all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,20 mm dia bore upto 09 to 12 storeys including all scafloding arrangments complete all as specified and directed

Fixing only old 15 mm steel tubing and including cleaning in positon (walls, ceiling and floor upto 04 storeys including all scaffolding arrangments complete all as specified and directed

Fixing only old 15 mm steel tubing and including cleaning in positon (walls, ceiling and floor upto 5 to 8storeys including all scaffolding arrangments etc complete all as specified and directed

Fixing only old 15 mm steel tubing and including cleaning in positon (walls, ceiling and floor upto 9 to 12 storeys including all scaffolding arrangments etc complete all as specified and directed

Fixing only old 20 mm steel tubing and including cleaning in positon (walls, ceiling and floor upto 4 storeys including all scaffolding arrangments complete all as specified and directed

Fixing only old 20 mm steel tubing and including cleaning in positon (walls, ceiling and floor upto 5 to 8 storeys including all scaffolding arrangments complete all as specified and directed

Fixing only old 20 mm steel tubing and including cleaning in positon (walls, ceiling and floor upto 9 to 12 storeys including all scaffolding arrangments complete all as specified and directed

S & F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors upto 4 storeys including all scaffolding arrangments complete all as specified and directed

S & F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors upto 5 to 8 storeys including all scaffolding arrangments complete all as specified and directed

S & F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors upto 9 to 12 storeys including all scaffolding arrangments complete all as specified and directed

S & F GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall and ceilingor laid in floors upto 4 storeys including all scaffolding arrangments complete all as specified and directed

S & F GI tubing 20 mm bore medium grde with all fittings and fixed complete to wall and ceilingor laid in floors upto 5 to 8 storeys including all scaffolding arrangments complete all as specified and directed

Demolition of RCC jalli of any description and in any position not otherwise specifically provided and removing debris from outside MoD land complete all as specified and directed. all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc incl raking out joints hacking for key scrubbing down with water and removing debris outside MD land including necessary scafolding of any heightcomplete all as specifed and direcetd.

M&L for rendering 20 mm thick in two coats 10 mm each in CM (1:4) mixed with liquid water proofing compound on fair faces of brick wall or concrete surfaces and finished even and fair including necessary scaffolding of any height complete all as specifed and direcetd. Note :- Top 10 mm layer will be blended with WPC as per manufacturers instructions.

M & L for repair to spalling of concrete by applying bond coat of epoxy bonding agent & Cement in 1:1 ratio for bondig old and new concrete on damaged surfaces and applying polymer modified mortar in CM (1:3) having 20 mm avg thickness Note :- (a) Supply only polymer mortar additive wiil be measured and paid separatly. Repirs to be done by authorised applicator of Dr Fixit/ Build Core/Fosroc/Pedilite as approved by GE. (b) (i) Quanitiy of polymer shall be 15% by weight of cement. (ii) Pan mixer shall be used to get homogenous dough on bond coat surfaces. (iii) Required thickness shall be achieved by repeating this step after 24 Hrs to as required. (iv) Repaired surfaces area shall be kept moist for 5-7 days.

M & L for repair to damaged surface of RCC elements like beams, columns, wall by removing all loose cement plaster/concrete, providing and laying of micro-concrete at least upto 20mm thickness (Avg) by using the recommended water powder ratio mix the micro-concrete with pan mixer as per manufacturer's instruction including watertight shuttering necessary curing for 7 days complete all as specified and directed by Engineer - in - Charge. Note : Micro concrete will be measured and paid separately. through authorised applicator of Dr Fixit/Build core/Fosroc/Peditilite as approved by GE.

Supply only polymer mortar additive for repair to spalling. Make : Dr Fixit/ Build Core/Fosroc/Pidilite.

Supply only micro-concrete for repair or build core. Make : Dr Fixit/Build core/Fosroc/Piditilite

M&L for preparing old surfaces of walls/ceilings by scrapping/rubbing and applying two coat of weather proof acrylic exterior paint (100% Acrylic) over one coat of primer including necessary scafolding of any heightcomplete all as specifed and direcetd.

M & L for preparation of surfaces cracks of plaster internal/external of walls, ceilings/Chajjas upto 5 mm wide, remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat including necessary scaffolding of any heightcomplete all as specifed and direcetd. Make :- Use of Dr Fixit 'X' paste compound/ Build Core Compound / Fosroc Compound, as approved by GE through their authorised applicator only.

M & L for preparation of surfaces by cutting 'V' groove cracks of plaster internal/external of walls, ceilings/Chajjas all along the crack 5 mm to 10 mm and remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat and for external application must be coated with paint including necessary scaffolding of any height complete all as specifed and direcetd. Make : Use of Dr Fixit 'X' paste compound/ Build Core Compound / Fosroc Compound, as approved by GE through their authorised applicator only.

M & L for preparation of surface of reinforced bar by applying rust remover and then applying a coat epoxy zinc primer on exposed reinforced surface. Make : Use of Dr Fixit 'X' paste compound/ Build Core Compound / Fosroc Compound, as approved by GE through their authorised applicator only. Note : Surface area for concrete shall be measured for payment purpose.

Supply only liquid water proofing compound.

Demolition of reinforced cement concrete not exc 15 cm thickness in any floors, removing debris from outside MoD land complete all as specified and directed.

S & F mild steel bars 10mm dia and over cut to length, bent to shape, as in reinforcement including cranking bending spirally for hooking and annealed not less than 0.9mm dia wire or securing with clips for resecuring the bars with TMT bars, quality conforming to complete all as directed.

All as above ser No 69 but from 6 to 8 mm dia

Dismantling Asbestos cement (corrugated, semi-corrugated, etc ) sheets in roof coverings.

Dismantling timber scantling unframed 40 sqcm and over in section in any positions in wooden purlins and all other similar works all as directed.

Supply & fix Pre-painted galvalume aluminium zinc coating GI based trapezoidal profile roofing sheets 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile height 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scaffoldings of any height complete all as specified and directed.

Supply & fix Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scaffoldings of any height complete all as specified and directed.

Supply & fix joist, channel, angle, tee sections, & MS flats fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) for purlins fixed to wooden rafters and all other similar works conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

Material and labour rendering 15 mm thick cement plaster in CM 1:4 on other than fair faces of brick/concrete work surfaces mixed with integral water proofing compound all as per manufacturer's instruction and as specified. Make: 'Plastocrete Plus' of Sika/ 'Pidiproof LW' of Pidilite for water proofing compound. Note: (i) WPC shall be measured and paid for separately as 'Supply only'. (ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instruction.

Material and labour rendering 15mm thick cement plaster in CM 1:6 other than fair faces of brick or concrete surfasces all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1 mm thick (average) wall care putty including rubbing with sand paper complete all as specified.

M&L for preparation of new surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1 mm thick (average) wall care putty including rubbing with sand paper complete all as specified.

Material and labour in repair to replace old decayed timber( including piecing, scarifying, etc of old and mew timber if required) second class hard wood clean sawn in scantlings timber framed and fixed in any position and description including scaffoldings of any heightcomplete all as specified and directed.

Taking down chowkhats exc 1.50 sqm and n.exc 4.00 sqm without taking off shutter each upto 04 storeys complete all as specified and directed.

Taking down chowkhats n exc 1.50 sqm each without taking off shutter each upto 04 storeys complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but n exc. 2.00 sqm each complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction with block board core and ply wood face panel, commercial type on both side complete all as specified and directed.

Supplied and fitted to chowkhats of factory made 2nd Class hard wood Glazed and skelton shutter 30mm thick open rebated and prepare to receive glass, gauge etc with sash bars divided into square with plain chemfered or rounded mitred and rebated sash bars any member as in windows /ventilator stilles and rails provided as per SSR part -I Section 8 clause 8.24 (b) upto 04 storeys complete all as specified and directed.

Supply & fix for 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

Material and labour for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treating ends of posts,back of chowkhats,etc. area tarred exc 0.1 sq m but n. exc. 0.5 sq m each and treated with tar or coal tar black paint complete all as specified and directed.

Material and labour for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, treating small articles such as holdfasts,end of posts,backs of chowkhats, etc area n. exc. 0.1 sq m each and treated with tar or coal tar black paint complete all as specified and directed.

M&L PCC 1:3:6 type C1(20 mm graded aggregate) as in bed blocks for hold fast and all other similar works including necesssary formwork complete all as specified and directed.

S & F mild steel flat iron as in hold fast clamps and all other similar works conforming to Fe 290. Gde -E-165 complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel.

S&F 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C'-22 complete all as specified and directed.

S&F aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed.

S&F aluminium anodised 100 mm barrel tower bolts of extruded section complete all as specified and directed.

S&F aluminium handle 100 mm cast type anodised

S&F aluminium handle 150 mm cast type anodised

S&F aluminium plate type II gate and shutter, hook & eyes 150mm size complete all as specified and directed.

M&L Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beading all as directed.

M&L sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 sqm each pane 3 mm thick complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified.

S&F in repair grating round 140mm size of PTMT (minimum weiht 50 gms) all as specified and directed.

M&L for Preparing new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel painting over and incl one coat of pink primer

M&L for Preparing old wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coats of synthetic enamel paint complete all as specified

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and directed

M&L for rendering 10mm thick on fair faces of brickwork in CM (1:4) complete all as specified and directed.

M&L glazed tiles digital coloured ceramic tiles 300x450x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match and rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

S&F as in repair vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

M&L in repair CP soap dish all as per cat part.

Supply and fixing 15 mm bore overhead shower single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 240 mm long(light weight) round shape with wall flange complete all as specified & directed.

S&F as in repair 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule.

S&F as in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions .

S&F in repair PVC connection 15mm size PTMT nuts of length 450 mm.

M&L in repair 75 mm dia PVC(SWR) multi floor trap including jointing with solvent cement complete all as specified and directed.

M&L in repair CP Towel Rail (61 CM) all as per specified and directed.

S&F as in repair grating square 150mm size of PTMT(minimum 100 gms) complete all as specified.

Demolition of brick work including all quoins, arches,pillars etc. but excluding ashlar facings built in cement mortar complete all as directed .

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified & as directed.

All as per item No-2 mentioned here in above but except bricks. (Serviceable bricks obtained from Item No-1 above to be reused)

M&L for preparation of new surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 3 mm thick (average) wall care putty including rubbing with sand paper complete all as specified.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 3 mm thick (average) wall care putty including rubbing with sand paper complete all as specified.

Material and labour Granite (of any type and colur) 20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid in floors/Jambs/WHB conters and all other similar works in approved design over 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

S & F powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame complete all as specified. Note : (i) Glass panes will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips however it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.

Supply & fix sheet glass, ordinary quality, 5.5 mm thick and glazed with oil putty or fixed with beads in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Excavation in trenches exc 1.50m wide and n exc 4.50m in depth for foundation ,drain pipes,sewage lines etc and getting out in soft loose soil complete all as specified and directed.

Material and labour for brick work with sub class 'B' brick straight curved on plan exceeding 6 metre mean radius built in CM 1:6 for cracked wall of manholes,septic tank, soak pits etc complete all as specified and directed.

Demolition and breaking up SGSW drain pipe of any dia set in cement mortar complete all as specified and directed.

Demolition of cement concrete un reinforced in any position incl PCC flooring over sewage line and paving not exc 15cm thick above or below ground level complete all as specified and directed.

M & L for cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, slab staging for water tanks and the like including weathering, slightly rounded or chamfered angles and throating including necessary formworks complete all as specified and directed by Engineer- in-charge.

M&L for RCC 1:2:4 type B-1 (Nominal mix ) (using 20mm graded stone aggregate) as in precast cover slab fixed in position , tie between two brick walls and all other similar works set in CM 1:4 including necessary form work complete all as directed.

M&L for cement concrete 1:2:4 ,Type B-2 (40mm graded stone aggregate) in foundations filling and mass concrete complete all as specified and directed.

M & L for concrete bed to glazed stoneware pipes of internal diameter 150 mm, class SP2, laid in trenches of depth from 1.5m to 4.5m in cement concrete 1:3:6 type C-2 using 40 mm nominal size graded crushed stone aggregate including packing under and haunching against the sides of pipes complete all as specified and directed.

M & L for 150 mm internal dia salt glazed stoneware pipes, class SP2 as per IS 651: 2007 laid in trenches and jointed with 1:1 cement mortar and yarn complete all as specified and as directed.

Returning, filling, including spreading, leveling, watering and well ramming in layers not exc 25 cm all as specified and directed.

S&F aluminium decogrill of suitable design having mesh size 75mm x 75mm complete all as specified and directed.

Removing excavated (soil) materials and deposited out of MD land.up to a distance of 15 km all as per directed.

S&F in repair sluice valves flanged end, cast iron body, flanged and drilled and non rising type stainless steel spindle with nut, long body, class P N 1.6, conforing to IS 14846 of 2000 for 150mm bore sizes including all flange joint with rubber or fiber board, bolts, nuts and washers of suitable size complete including pumping out accumulated water complete including pumping out accumulated water from trenches complete all as specified and directed (Note:- Sluice valves are to be replaced in existing trenches/pits) Make : Kirloskar/ Kartar / Zoloto / Leader

Supply and fix in repair/replacement of CI Butterfly valve of size 150 mm dia flanged ends,including provision of flanged joints, nut bolts etc complete all as specified and directed. Make: Kartar / L & T / Kirloskar

S&F in repair Non return valves valves flanged end, cast iron body, flanged, class PN 1.6, conforing to IS 5312 of 2000 for 150 mm bore sizes including all flange joint with rubber or fiber board, bolts, nuts and washers complete all as specified and directed. Make : Kartar / Kirloskar/ Zoloto

Supply and fix in repair ball type foot valve 10/15 Kg/sqcm of make (ISI marked) in position at location including M&L for making flanged joints and repair and making good to existing PCC surface of 200 mm bore sizes complete all as specified and directed. Make:-Kirloskar/Kartar/ Zoloto

Supply and fix in repair MS ERW Pipe of 150 mm bore of IS 1239 of 2000 with and including flanged joint complete with nut and bolts including fibre gasket including provision of MS flanged 8 mm thick of suitable dia, duly drilled for bolts of hole dia as stated, threaded & welded to prepare as directed for joints, complete all as specified and directed. Make : Tata/ Jindal/ GST

Taking down old unserviceable GI pipe in any position and in any height for repairs and taking credit all as directed for 25mm bore size/fittings etc.

Taking down old unserviceable GI pipe in any position and in any height for repairs and taking credit all as directed for 40mm bore size/fittings etc.

Taking down old unserviceable GI pipe in any position and in any height for repairs and taking credit all as directed for 50mm bore size/fittings etc.

Supply and fix GI pipes medium grade 25 mm bore with all fittings / GI bends, unions etc complete to wall and ceiling or laid in floor all as specified and directed.

Supply and fix GI pipes medium grade 40 mm bore with all fittings / GI bends, unions etc complete to wall and ceiling or laid in floor all as specified and directed.

Supply and fix GI pipes medium grade 50 mm bore with all fittings / GI bends, unions etc complete to wall and ceiling or laid in floor all as specified and directed.

Supply and fix in repairs Gun metal globe or gate valve 15 mm bore with iron wheel head screwed both end for iron pipe and fixed complete all as specified and directed. Make : Gem / Leader / Zoloto

All as per Ser item No 152 above but 20mm bore

All as per Ser item No 152 above but 40 mm bore

All as per Ser item No 152 above but 50 mm bore

Supply & Fix Pressure Reducing Valve of brass body, internal threaded ends of dia 25 mm size complete all as specified and directed. Make:- Kartar/Kirloskar/Zoloto

M&L for PCC in foundation,filling and mass concrete as in motor foundation type B2 1:2:4 using 40 mm graded stone aggregate including use & waste of form work complete all as specified and directed

M&L for PCC in floors or mud stops rounded or chamfered edges type B0 1:2:4 using 12.5mm graded stone aggregate 25 mm thick complete all as specified and directed.

M/S RAMA ENTERPRISES

ASHOK CONSTRUCTION

Bidder Name

ASHOK CONSTRUCTION

M/S RAMA ENTERPRISES

m/s riya construction co.