Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.8 LAccepted-Finance 1723 GUPTA AND SONS SECTOR 39 B CHANDIGARH CHANDIGARH CHANDIGARH 160036 UDYAM CH 01 0042756 | CHANDIGARH | CHANDIGARH | 160036 | ₹49.8 L | L1 | Accepted-Finance L1 |
| 2 | L2₹50.5 L+₹69,420 (1.40%)Rejected-Finance W 701 HARBHAJAN VIHAR AWHO SECTOR 14 SAS NAGAR MOHALI PB 140307 | S A S NAGAR | PUNJAB | 140307 | ₹50.5 L+₹69,420 (1.40%) | L2 | Rejected-Finance L2 |
| 3 | L3₹50.7 L+₹90,710 (1.82%)Rejected-Finance | ₹50.7 L+₹90,710 (1.82%) | L3 | Rejected-Finance L3 |
| 4 | L4₹50.9 L+₹1.2 L (2.33%)Rejected-Finance | ₹50.9 L+₹1.2 L (2.33%) | L4 | Rejected-Finance L4 |
| 5 | L5₹53.5 L+₹3.8 L (7.59%)Rejected-Finance | ₹53.5 L+₹3.8 L (7.59%) | L5 | Rejected-Finance L5 |
| Sl No | Description | Qty | Unit | MS R G ENTERPRISES L4 | M/s Om parkash L3 | M/S Gupta and Sons L1 | B S FURNITURE L5 | M/s Hari Om Engineer and Contractor L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; manhole cover; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 or Fe 165-0, as in repair all as specified and directed. | 396 | Kilogram | 98 ₹38,808 Lowest | 120 ₹47,520 | 120 ₹47,520 | 100 ₹39,600 | 130 ₹51,480 |
| 2.00 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including cutting out grrove in wall, insert sheet under groove and pack with CM 1:3 complete all as specified and directed. | 66 | Square Meter | 695 ₹45,870 Lowest | 800 ₹52,800 | 850 ₹56,100 | 700 ₹46,200 | 1,000 ₹66,000 |
| 3.00 | Two coats of synthetic enamel paint on steel and iron surfaces over one coat of red oxide primer on surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed. | 25 | Square Metre | 70 ₹1,750 | 85 ₹2,125 | 60 ₹1,500 | 75 ₹1,875 | 50 ₹1,250 Lowest |
| 4.00 | Taking down chowkats or frame exc. 1.5 Sqm and n exc 4 Square metre with shutters, without taking off shutters from the frame, complete all as specified and directed. | 22 | Each | 120 ₹2,640 Lowest | 240 ₹5,280 | 150 ₹3,300 | 125 ₹2,750 | 300 ₹6,600 |
| 5.00 | Factory made pressed steel frames of profile width 105mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of primer, including filling of PCC 1:3:6 complete all as specified and directed. | 110 | Running Metre | 750 ₹82,500 | 600 ₹66,000 | 490 ₹53,900 Lowest | 760 ₹83,600 | 650 ₹71,500 |
| 6.00 | Factory made second class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, all as specified and directed. | 40 | Square Meter | 2,150 ₹86,000 Lowest | 2,300 ₹92,000 | 2,500 ₹1,00,000 | 2,200 ₹88,000 | 2,300 ₹92,000 |
| 7.00 | preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 95 | Square Metre | 70 ₹6,650 | 80 ₹7,600 | 60 ₹5,700 | 75 ₹7,125 | 50 ₹4,750 Lowest |
| 8.00 | D' type, 150mm Extruded aluminium alloy handle fabricated type, complete all as specified and directed. | 66 | Each | 70 ₹4,620 | 65 ₹4,290 | 70 ₹4,620 | 75 ₹4,950 | 50 ₹3,300 Lowest |
| 9.00 | 150 mm size aluminium , barrel tower bolt of extruded section and complete all as specified and directed. | 66 | Each | 70 ₹4,620 | 65 ₹4,290 | 70 ₹4,620 | 75 ₹4,950 | 50 ₹3,300 Lowest |
| 10.00 | Aluminum alloy, anodized, sliding door bolt 250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed. | 22 | Each | 350 ₹7,700 | 350 ₹7,700 | 400 ₹8,800 | 380 ₹8,360 | 300 ₹6,600 Lowest |
Tender Value
₹46.5 L
EMD Value
₹93,000
Closing Date
8 Jul 2026, 6:00 pmClosed
Garrison Engineer
Garrison Engineer Chandimandir panchkula Haryana 134107
CA NO. GE/CHM-10/2026-2027 SPL REPAIRS TO ROOF AND CONNECTED WORK IN SECTOR D JCOS MD ACCN UNDER AGE B/R I AT CHANDIMANDIR MIL STN
2026_MES_762319_2
GE/CHM-10/2026-27
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹93,000
Yes
2 Sept 2026
18 Jun 2026
10 Jul 2026
18 Jun 2026
8 Jul 2026
25 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; manhole cover; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 or Fe 165-0, as in repair all as specified and directed. | 396 | Kilogram | - | - |
| 2 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including cutting out grrove in wall, insert sheet under groove and pack with CM 1:3 complete all as specified and directed. | 66 | Square Meter | - | - |
| 3 | Two coats of synthetic enamel paint on steel and iron surfaces over one coat of red oxide primer on surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed. | 25 | Square Metre | - | - |
| 4 | Taking down chowkats or frame exc. 1.5 Sqm and n exc 4 Square metre with shutters, without taking off shutters from the frame, complete all as specified and directed. | 22 | Each | - | - |
| 5 | Factory made pressed steel frames of profile width 105mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of primer, including filling of PCC 1:3:6 complete all as specified and directed. | 110 | Running Metre | - | - |
| 6 | Factory made second class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, all as specified and directed. | 40 | Square Meter | - | - |
| 7 | preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 95 | Square Metre | - | - |
| 8 | D' type, 150mm Extruded aluminium alloy handle fabricated type, complete all as specified and directed. | 66 | Each | - | - |
| 9 | 150 mm size aluminium , barrel tower bolt of extruded section and complete all as specified and directed. | 66 | Each | - | - |
| 10 | Aluminum alloy, anodized, sliding door bolt 250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed. | 22 | Each | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.34 MB
Tenderpages10.pdf
Tender Documents • 1.09 MB
BOQ_865633.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .