Repair/maint of misc B/R works in Garages,Parking Sheds,Ramps under AGE B/R (P-2) at Faridkot Mil Stn

Amount

Taking down hood covers of rolling shutters of area upto 10 Sqm, tightening of loose bracket plates, guide channel etc, greasing helical spring, shafts and guide channel for proper functioning of rolling shutters and refixing hood covers in position after repair complete all as specified and directed.

All as per Ser item No 01 here-in-before but rolling shutters of area exceeding 10 sqm but not exceeding 15 sqm.

Taking down hood covers of rolling shutters with gear box assembly & of area upto 36 Sqm, tightening of loose bracket plates, guide channel etc, greasing helical spring, shafts and guide channel for proper functioning of rolling shutters and refixing hood covers in position after repair complete all as specified and directed.

Taking down rolling shutter of area upto 10 Sqm & of any type including top covers for carrying out repairs/ replacement of worn out parts such as brackets, guide channel, shaft, pulley, gear wheels, gear boxes and straightning partition, side patti, press button, rails, tightening end clips etc including cleaning and greasing the parts in good condition and refixing in position after repair complete all as specified and directed. Note: Spare parts required for repair shall be measured and paid under relevant items as supply only.

All as per Ser item No 04 here-in-before but rolling shutters of area exceeding 10 sqm but not exceeding 15 sqm.

All as per Ser item No 04 here-in-before but rolling shutters of area exceeding 15 sqm

Supply only Heavy duty spring of length upto 35 cm.

Supply only Heavy duty spring of length exc 35cm but n.exc 45 cm .

Supply only Gear box set.

Supply only Gear wheel (mild steel/Cast iron as per existing).

Supply only mild steel Gear worm.

Supply only Shaft wheel with bearing.

Supply only Gear box handle.

Supply only Press button rail unit.

Supply only side guide made out of 12 gauge mild steel sheet .

Supply only End clips.

Supply only mild steel safety lever lock .

Supply only Partition patties 75 mm wide (mild steel strip).

Supply only Heavy duty mild steel shaft pipe of 40 mm dia.

Supply only Heavy duty mild steel shaft pipe of 50 mm dia.

Supply only Top Cover made out of 18 gauge mild steel sheet .

Supply only Mild steel flat of size 18 x 5mm.

Supply only MS Channel and similar MS work required for collapsible gate.

M&L for taking down collapsible gate and replacing/ repairing parts such as mild steel flat, channel, bottom and top rails including revetting , cleaning, greasing and resecuring in good working condition complete all as specified and directed . Note: Spare parts required for repair shall be measured and paid under relevant items as supply only.

Taking down rolling shutter of area n.exc 10 sqm, any type, including top covers complete all as specified and directed .

Taking down rolling shutter of area exc 10 sqm but n.exc 15 sqm, any type, including top covers complete all as specified and directed .

Taking down rolling shutter of area exc 15 sqm , any type, including top covers complete all as specified and directed .

S&F Steel rolling shutters having thickness of lath 1 mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple, bracket plates, clamps, pulley, spring, shaft, hold fast, stopper, pulling hook and other allied parts complete including one shop coat of primer; erected in position as indicated, push pull or manual type complete all as specified and directed .

S&F Steel rolling shutters having thickness of laths 1.00 mm, gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete all as specified and directed. .

Taking down steel collapsible gate of area n. exc 10 Sqm, any type complete all as specified and directed. .

Taking down steel collapsible gate of area exc 10 Sqm but n. exc 15 sqm, any type complete all as specified and directed. .

S&F Collapsible steel gates, top hung ,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and directed.

M&L for repairing aluminium door by taking out frame alongwith shutter, fixing missing screw to wall, adjusting floor spring, repairing hook joints of frame and re-erecting in good working condition by necessary lubrication complete all as specified and directed. Note Aluminium tee /angle required for replacement will be measured and paid separately as 'supply only' under relevant items.

S&F in replacement double action floor door spring ,hydraulically regulated, made up of minimum 1.25 mm thick aluminium aloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other part made of mild steel heavy duty complete all as specified and directed.

Supply only anodized aluminium sections for door /window /ventilator /partitions /snap grid ceiling etc complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre,pulp, insulation) or insulation boards/slabs/blankets, any thickness, including cover fillets etc complete all as specified & directed.

S&F 12mm thick perforated particle board/tiles for insulation and accoustic purposes as in ceiling fixed with screws as per manufacturer's instructions, including anodised aluminium snap grid frame work for false ceiling of grid 60x60mm,hangers 6mm dia (upto 1200mm length)adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size & length 60mm and expansion hold fasterners 12.5mm dia,40mm long complete all as specified and directed. Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of ceiling.

S&F hollow PVC wall lining, interlocking type, 7mm thick, plain/coloured /wood grain fitted in to the wall with PVC rawl plug and steel screws including fillets on joints as per manufacturers instructions complete all as specified and directed . Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of wall.

Taking down shutter of any description exc 1 sqm but n.exc 2sqm each complete all as specified and directed

Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed

S&F Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded all as specified and directed .

S&F anodised aluminium frame & shutters for doors, window, ventilators with powder coating on aluminium (minimum thickness of powder coating 50 micron & of standard sections) as per the specification including necessary fittings & fixtures as required complete all as specified and directed.

M&L for 4 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .

M&L for 9mm prelaminated particle board,exterior grade,prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws complete all as specified and directed.

S&F PVC door frame of size 50x47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube, edges shall be printed to match printed sheet in opening complete all as specified & directed.

S&F Factory made solid PVC moulded door shutter ,28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face to be fitted in the MS frame welded/ sealed to the style & rail with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed .

M&L for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

M&L for 2nd class hard wood plain,solid,straight chowkats and frames,wrought,framed rebated on the solid,rounded or chamfered,put together with glue pinned at joints,supply and fixed complete all as specified and directed

S&F factory made 35 mm thick 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of BWP commercial plywood or 12mm thick veneered particle board with commercial veneering on both faces .The size of rail and stiles as per IS: 1003(Part-1),kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed

M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed .

S&F aluminium alloy, anodised, sliding door bolt of length 300mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed .

S&F Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.

S&F Aluminium anodised, cast type, handle 150 mm size complete all as specified and directed.

S&F 100mm long mild steel butt hinges, medium weight, cold rolled (ISI marked) fixed with screws complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed .

S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .

S&F in repair Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.

S&F in repair Aluminium anodised, cast type, handle 150 mm size complete all as specified and directed.

S&F in repair 100mm long mild steel butt hinges, medium weight, cold rolled (ISI marked) fixed with screws complete all as specified and directed.

S&F in repair 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .

S&F in repair aluminium alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed .

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed complete all as specified

Dismantling of plain or corrugated steel/fibre glass sheeting, any gauge in roof covering complete all as specified and directed .

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .

All as per Ser item No 66 here-in-before but except sheet

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed .

S&F Roof trusses (framed), trussed, purlins, crane gantries rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc confirmimg to Fe 290 (Gde E -165) complete all as specified and directed

M&L for Framed work as in doors or gates etc of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing using Fe 290 (Gde-E-165) complete. complete all as specified and directed

S&F in repair door closer hydraulically regulated, Aluminium (extruded section body), designation No 3, universal type suitable for door shutter 851mm to 1000mm width and weight between 61 to 80 kg complete all as specified and directed.

M&L for taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in two layers ( Ist layer 10mm thick & 2nd layer 5mm thick ) in cement mortar 1:4 with WPC on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed . Note : WPC will be measured and paid separately

M&L for rendering 15 mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) following the under layer with scratching tool, applying cement slurry on the under layer of cement @ 3 Kg per square metre and top layer 15mm thick in cement mortar 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion (white/tinted) after finishing the surfaces with a coat of wall care putty by hand roller complete all as specified and directed .

M&L for preparation of newly plastered or unplastered ceiling surfaces and applying three coats of white wash complete all as specified and directed .

M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed

Supply only Liquid water proofing compound

M&L for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old painted steel surface of any discription over 10 cm width or girth after prepration of surface complete all as specified and directed

M&L for applying one coat of aluminium paint on old painted steel surface of any discription over 10 cm width or girth after prepration of surface complete all as specified and directed

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping,bed blocks and similar works including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed.

Dismantling of existing old padding concrete of any thickness including existing water proofing treatment over the RCC slab other than beams, chajjas, staircase etc by chipping of with proper tools viz chiesel by applying reasonable force so as to avoid any damages to existing RCC roof slab complete as directed .

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) with WPC as in padding course and similar works on roof slab, levelling to achieve specific slope including slightly rounded or chamfered angles including necessary formwork ,finishing surfaces even and smooth without using extra cement complete all as specified and directed. Note : WPC will be measured and paid separately

M&L for rendering 10 mm thick in cement mortar 1:3 with WPC on fair faces of brick work or concrete surfaces as in roof complete all as specified and directed . Note : WPC will be measured and paid separately

Supply and fix APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150gms/sqm) laid over primed surface by using forced application using 0.3 ltrs/Sqm bituminous primer including applying a coat of hot blown bitumen 85/25 grade @1.2Kg/Sqm over the membrane and finally applying two coats of aluminium paint @ 0.10 ltrs/Sqm complete all as specified and directed. (f)) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer. Note : (i) The treatment shall be carried out as per the manufacturers instructions, and as directed by Engineer in Charge. (ii) The plan area of floor shall be considered for payment Make:- Torchtar , STP,Asian Paints smart care APP Membrane, IWL, SIka,Tiki Tar Danosa,Bengal Bitumen

Dismantling CI/PVC pipe of 75/100mm dia alongwith fittings ,below or above GL/laid in floors/fixed to walls jointed in cement mortar complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches/in floors/fixed to walls including fixing clamps with nut and bolts complete all as specified and directed .

S&F PVC (SWR) bends any radius ,110mm bore complete all as specified and directed.

Demolition of Reinforced Cement Concrete of any description or in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

M&L for plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed.

M&L for brick work with fly ash bricks using old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed .

M&L for plain cement concrete 1:3:6 type C-2 (using 20mm graded crushed stone aggregates) as in surface channel and drains complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .

S&F Glazed ceramic coloured tiles 450mmx300mmx7mm thick (colour and shade as approved) as in vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles complete all as specified and directed

S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.6 sqm but not exceeding 0.11 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying finishes complete all as specified and directed .

Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed

M&L for 18 to 20mm thick Granite (of approved type and colour) work (table rubbed and polished) as in cooking platforms, stair case landing or steps and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with approved shade of granite including cutting and moulding the edges half round on exposed side complete all as specified and directed

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed

Demolition of concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed

M&L for 100 mm thick plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in hardstanding etc,surface finished even and fair without using extra cement complete all as specified and directed .

M&L for 100 mm thick plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in sub bases,sub floors and pavings etc,surface finished even and fair without using extra cement complete all as specified and directed . Note :- A Sum of Rs.1,03,751.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 23 & 24 (Schedule of credit) of Tender Documents.

M/S BSS AND SONS

mehar buildcon

MS JAIN PAINT AND HARDWARE STORE

M/S RAJESH KUMAR and CO.

NEW AMRITSAR CONSTRUCTION COMPANY

RAJINDRA AIR CONDITINOR FABRICATORS

SHIV SHAKTI BUILDERS

msgurjantconstructioncompany