Construction of Community Toilet at SWM area Palazhi in Kadayal Town Panchayat Kanyakumari District 15th Finance Tied Grant 2024-25

Amount

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc complete complying with SS20B. TNDSS No:23&24

Cement concrete of mix 1:4:8 (one part of cement four part of sand and eight part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:28

Supplying and erecting centering to sides and soffits including supports and strutting with necessary centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29 m height for plain surfaces such as RCC slabs rectangular beams Tee or L beams lintels, stair case beam etc. in all floors with all cross bracing using mild steel sheets of size 90x60 cm and BG10 gauge stiffended with welded mild steel angles of size 25x25x3 mm for boarding laid over silver oak country wood joists of size 10x6.5 cm spaced at about 90 cm center to center and supported with casurina props of 10 cm to 13 cm Ø spaced at 75 cm center to center etc. complete complying with standard specification in all floors. TNDSS No:30&36 (for square column)

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29 m height for plain surfaces such as RCC slabs rectangular beams Tee or L beams lintels, stair case beam etc. in all floors with all cross bracing using mild steel sheets of size 90x60 cm and BG10 gauge stiffended with welded mild steel angles of size 25x25x3 mm for boarding laid over silver oak country wood joists of size 10x6.5 cm spaced at about 90 cm center to center and supported with casurina props of 10 cm to 13 cm Ø spaced at 75 cm center to center etc. complete complying with standard specification in all floors. TNDSS No:30&36

Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or ribbed tar steel rods, for all RCC works as per the design given by the departmental officers including cost of steel cutting, bending, placing in position and binding with binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete. TNDSS No:97

Reinforcement Cement concrete 1:1½:3 (one part of cement one and a half part of sand and three part of aggregates) using machine broken granite jelly of 20 mm size for all reinforced cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. TNDSS No:30

Brick work in cement mortar 1:5 (one part of cement five part of sand) mix using best country bricks of size 8¾"x4¼"x2¾" from approved quarry including curing, cost and conveyance of all materials to site and all labour charges etc complete as per standard specification.

Supply and fixing in position best quality of approved make Indian Water closet of size 580 x 440 mm with all accessories such as 'P' trap or 'S' trap confirming to IS 2556 part XII with sand cusion and forming flooring alround the closet using 40 mm leveling course 1:4:8 - 100 mm thick and finishing the top to the required slope and including necessary internal connection and outlet connection and making the disturbed potion to original condition without leakage etc including Labour charges for fixing etc complete.

Supplying and fixing in position of glazed water closet of size 58 cm with ‘P’ trap; and double flopped seat cover, 10 litres capacity PVC low level automatic flushing tank including all internal plated brown headed stopcock, 12 mm nylon connection with necessary teak wood plugs, clamps screws to the portion of coming with wall or floors, including dismantling masonry and redoing the same to the original condition.

Supply and fixing in position best quality of approved make Wash hand basin of size 550 x 440 mm with all accessories such as cast iron brackets, including cost of 15 mm Ø brass nipple, 15 mm nylon connection etc including fixing the wash basin in the wall in position with a pair of CI brackets with TW plug and screws and giving necessary water supply connection and painting the brackets with two coats of paint over priming coat of anticorrosive paint including testing leakages etc, complete complying with standard specifications (the wash hand basin and the specials should be got approved by Departmental officer before use on works)

Paving floor with colour ceramic tiles of size 200 x 200 x 6 mm in all floors over the base layer of cement mortar 1:3 (one part of cement three part of sand) 20 mm thick pointed with white cement at 0.40 kg/m2 including finishing the joints etc complete, as directed by the departmental officers (The rate should be exclusive of cost of flooring concrete 1:5) special

Dadooing the walls with plain glazed tiles of 150 x 150 x 6 mm set in cement mortar 1:2 (one part of cement two part of sand) 12 mm and pointing white cement used 4kg/m2 neatly etc complete as directed.

Supplying and fixing of steel door with suitable design including cost of materials, welding and conveyance of all materials to site locking arrangements and painting one coat of primer etc. complete as per standard specifications including fixing charges etc. complete for the work.

Solid PVC door shutters using 19 gauge 19 mm MS square tubes for styles and outer frames. 15 mm MS square tubes for top lock and bottom rails. The steel tubes shall be covered with 5 mm thick solid PVC sheets. Shutter using 5 mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings.

Supplying and fixing of MS Grill of approved design forventilator openings etc using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc complete complying with standard specification.

Ceiling plastering and finishing all RCC exposed surface such as RCC slabs, sunshade canopies, stair case steps, landing slab, etc. with cement mortar 1:3 (one part of cement three part of sand) 10 mm thick including packing the surface and provided necessary cement mortar nosing, headings as per the size specification wherever necessary using the same mix as directed by the departmental officers etc. complete complying with standard specification.

Dry rubble masonry using new stone including simultaneous pointing of the export surface and all incidental charge such as bailing out water etc complete, Scaffolding curing fishing complete with standard specification.

Cement concrete 1:2:4 (one part of cement two part of sand and four part of aggregates) using machine broken granite jelly of 20 mm size for all cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification.

Plastering walls with cement mortar 1:4 (one part of cement four part of sand) 12 mm thick including all cost and conveyance of all materials and all labour charges etc. complete as per standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc complete complying with standard specification. (The make, quality and colour of paint should be got approved by the departmental officers before use on works.)

Painting two coats with ready mixed plastic emulsion paints of first class quality and of approved colour over a priming coat including through scraping clean removal of dirt etc, complete and including cost of necessary plaster of paris, putty, brushes, wherever required and all labour charges, scaffolding charges etc., complete as per standard specification.

Supply and delivery of fixing of HDPE tank 1000 litres capacity as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of GI pipes and specials for pipe connection works including cutting, threading and fixing chargers as directed by officers.

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box and 5A F.T. switch with painting of suitable colour for open PVC light point / fan point for electronic regulator. (Assume 6 points per coil) (SD-20)

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x 113 mm TW switch box for 5 A 3 pin non interlocking FT wall socket and 5A FT switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point. (SD-36)

Supply and delivery of 20W LED 4' light fittings with ISI mark and all other accessories what ever necessary including all other labour charges etc. complete as per standard specification

Supply and delivery of 15W LED bulb fittings with ISI mark and all other accessories what ever necessary including all other labour charges etc. complete as per standard specification

Supply and fixing of brass cable gland for 2 x 4 sq.mm PVC LTUG aluminium armoured cable with earth connection SD 158.

Supply and fixing of TNEB Meter Board suitable for 3 Phase, 63A service connection made up of suitable angle iron frame work of size 2 feet x 1½ feet using angle iron of size 1½ inch x 1½ inch x ¼ inch rigidly fixed on wall, covered with hylem sheet of size 2 feet x 1½ feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63A fuse units (500V), 1 No. Neutral link, copper earth flat of size 1inch x ¼ inch with interconnection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete SD 132.

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam of required thick specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base / Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause. 406 of MORTH Rev-5.

Supply of interlocking paver block M40 grade bounding and laying of 80 mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver block in required sizes of minimum compressive strength of 40N/mm² in uniform shape of approved make to be laid in flurrying bone pattern with approved non sticking surface in the top and the rate including levelling the base preparation of sub base with cushion 100 mm thick, laying out the pavement cut the pieces to fit the edge, vibrating the pavers, sweeping transporting, loading, unloading and laying interlocking paver block as per standard specification.

Conducting Geo Physical Survey charges.

Drilling of bore well of size 6” to 8” dia in sedimentary formation using hand base sets including insertion of casing pipes etc. including supplying and packing of pebbles and conveyance of hand bore set including loading and unloading.

Labour charges for inserting casing pipes assembly (with slot or without slot) in the drilled hle including welding the joint etc complete and supplying and packing the annular space with pebbles of size and quality as approved by the executive engineer.

Supply and delivery of following PVC / GI pipes and specials 200 mm PVC casing pipe RS

150 mm PVC casing pipe RS

50 mm U PVC pipe

Nylon rope

4 sq.mm submersible cable

50 mm specials adopter

50 mm bore clamp

50 mm GI elbow

50 mm GI hex nipple

50 mm GM gate valve

50 mm non return valve

50 mm GI flange set

50 mm GI pipe

63 mm FTA

63 mm MTA

180 mm end cap

63 mm PVC 6KSC pipe

63 mm PVC elbow

63 mm PVC bend

Supply and delivery of following bore electrical specials 63 Amps porcelain fuse unit (500V)

Service wire (SD 68)

25 mm GI pipe

65 mm GI pipe

Supply and delivery of 7.5 HP submersible pump set having a duty condition of 75 lpm discharge against head of 200 metre confirming to IS specification with ISS marking suitable for installation panel board including cost of all materials and all conveyance charges etc complete as per standard specification.

Supply and delivery of wall mounting type control panel board of Ammeter, Voltmeter single phase prevents insulator-indicating lambs, STAR DELTA / DOL starter. Suitable for 7.5 HP suitable certificate pump set including all charges.

Labour charges for fixing gate valve and non return valve in proper position including all labour charges etc. complete as per standard specification.

Labour charges for the erection of submersible pump set in bore well / open well including fixing and jointing submersible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges up to the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pump set and trail run for 10 days.

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc complete complying with SS20B. TNDSS No:23&24

Cement concrete of mix 1:4:8 (one part of cement four part of sand and eight part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:28

Cement concrete of mix 1:3:6 (one part of cement three part of sand and six part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:24

Brick work in cement mortar 1:5 (one part of cement five part of sand) mix using country bricks of size 8¾"x4¼"x2¾" including curing, cost and conveyance of all materials to site and all labour charges etc complete as per standard specification.

Supply and fixing of RCC Precast slab in cement concrete 1:1½:3 mix (one part of cement one and a half part of sand and three part of aggregates) of thick 0.075 m using 20 mm ISS HBG metal including cost of molding charges mixing laying and curing cost and conveyance of all materials to site and all labour charges etc. complete as per standard specification but including cost of reinforcement.

Plastering walls with cement mortar 1:4 (one part of cement four part of sand) 12 mm thick including all cost and conveyance of all materials and all labour charges etc. complete as per standard specification. TNDSS No:61

Painting two coats with ready mixed plastic emulsion paints of first class quality and of approved colour over a priming coat including through scraping clean removal of dirt etc, complete and including cost of necessary plaster of paris, putty, brushes, wherever required and all labour charges, scaffolding charges etc., complete as per standard specification.

Supplying and fixing of steel door with suitable design including cost of materials, welding and conveyance of all materials to site locking arrangements and painting one coat of primer etc. complete as per standard specifications including fixing charges etc. complete for the work.

Earth work excavation and depositing on bank with initial lead of 2 metre narrow trenches for laying of pipes and refilling earth for water supply works in the hard stiff clay stiff black cotton hard red earth shales murram gravel stoney earth and earth mixed with small size boulders and hard gravelly soil as directed by the departmental officers.