Portable Washrooms Tender

Amount

Disconnecting the existing water supply and drainage connections from the existing portable washroom cabins including pluggingwith end caps etc complete as directed by the engineer incharge

Disconnecting and releasing PVC water tanks from the existing portable washroom cabins and transporting to the stockyard anywhere in the campus within the radious of 2.5km

Shifting the existing portable washroom cabins of size 8x4 feet through mechanical means using cranes with necessary safety arrangements to the scrap yard anywhere within the campus within the radious of 2.5 Km

Demolishing RCC work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer -in-charge

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with cement mortar 1:6 (1 Cement : 6 Coarse Sand)

Providing Flush/Ruled Pointing : Pointing on stone work with cement mortar 1:3 (1 Cement : 3 Fine Sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge

Fabricating supplying and installation and errection of PUF based porarttile wash room units of the following specifications including the cost of maternal transportation, machinary charges for erection like cranes as suitable at site, labour, safety arrangemts barricading etc with all incidentials to complete the work in all respect as instructed by engineer incharge Specification details: Product: Product comprise of Steel fabricated insulated comntainer type Toilets having overhall external size 2438mm(L) X1220mm (B) X 22438mm(H) Base Frame: The base frame shall be made out of suitable MS steel C channels. L angels and Rectangle and square Hollow sections tubes Floors: Floors of the cabins made up of MS structure on the base gop with the floor panel shall be made 16mm Elison Board with Vinyl sheet Walls: The walls shall be consistig of SANDWICH PUF PANEL with TCP color coated Gl sheeet having 0.40mm thickness from inside skin and outside skin as well, with insulation material of fire retardant, self extinguishing and CFC free polyurethane foam (PUF) embedded between the two through injection molding process Total thickness of wall panel shall be 40mm Roof: The roof cladding of the cabin shall be consisting of SANDWICH PUF PANEL with TCP color coated Gl sheeet having 0.40mm thickness from inside akin and outside skin as well, with 7 insulation material of fire retardant, self extinguishing and CFC free, Nos polyurethane foam (PUF) embedded between the two through injection molding process. Total thickness of wall panel shall be 30mm Door: Door (D1) of size 2.5'X6.5'(H) of 1 no shall be made of SANDWICH PUF PANEL of thickness 40mm (same as wall), with padlock, Towert bolt, Handels and necessary hardware's shall be provided Electrical: The electrical unit shall be provided with 2 no's Bulk head fitting, 1 no 15 amp socket with switches in geyser provision, 1 no UPVC louver with exhaust fan with necessary wiring through casing capping Sanitary sysytem Sanitary: consisting of 1 nimber EWC closet with flush tank, 1 no soap stand, 1 no towel rod, 1 no Hot and cold ss tap. 1 number head shower and 1 number wash basin, Ms structure with 300ltrs over head tank with base stand frame and also provided with necessary outlet pipes with provision for water drain out and connecting ot existing outlet pipe Painting: Painting of the expose MS structure shall be painted with one coat primer and two coat enamel paint

NIRMALA BUILDERS AND DEVELOPERS