Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.9 LAccepted-AOC HATIA ROAD DANGALPARA DISTT DUMKA JHARKHAND PIN 814101 | DUMKA | DUMKA | JHARKHAND | 814101 | L1 | Accepted-AOC QUOTED AMOUNT IS REASONABLE | |
| 2 | L2₹29.6 L+₹1.7 L (6.03%)Rejected-Finance E 140 2010 BKP VILL AMTALLA PO DUMARCHIR DIST PAKUR PIN 814111 JHARKHAND | PAKUR | PAKUR | JHARKHAND | 814111 | L2 | Rejected-Finance QUOATED AMOUNT IS HIGHER THAN L1 BIDDER |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
8 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI ARVIND KUMAR SHARMA IDSE SE CWE AF PANAGARH
HQ CWE AF PANAGARH MILITARY ENGINEER SERVICES AIR FORCE STATION ARJAN SINGH PO BIRUDIAH DIST BURDWAN WEST BENGAL PIN 713148
REPAIRS TO CERTAIN ROADS AND REPLACEMENT OF ROAD SIDE FURNITURE AT AIR FORCE STATION SINGARSI UNDER AGE (I) (AF) SINGARSI
2022_MES_562205_1
82375/SING/E8
Open Tender
Civil Works - Roads
Item Rate
180 days
AGE I AF SINGARSI
REFER TO TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
AGE I AF SINGARSI
₹60,000
Yes
22 Dec 2022
10 Nov 2022
15 Dec 2022
10 Nov 2022
8 Dec 2022
24 Nov 2022
10 Nov 2022 - 15 Nov 2022
Amount
Repair to potholes any depth n.exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads etc cutting around edges to at least 25 mm in depth, making good by applying tack coat@ 5Kg per 10 Sqm (VG-10), putting in premix bituminous macadam (Design Mix), with 4.0% binder content(Minimum) VG-30 by weight of total mix,, rolled and compacted to required camber and gradient and sealed with sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of pot holes exc. 30mm all as specified and directed.
Preparing old bituminous/black top Surfaces by brushing with Wire Brushes for removing Caked, Mud, etc., Sweeping with Brooms and finally Fanning the Cleaned Surface with Gunny Bags to remove all loose Dirts, etc., complete all as specified and as directed.
Material and labour for applying evenly a priming/tack coat with bituminous primer (VG-10) @ 5 Kg per 10 Sqm complete all as specified and directed by Engr - in - Charge.
M&L for premix bituminous macadam (Design Mix), 75 mm or less consolidataed thickness with 4.0% binder content(Minimum) VG-30 by weight of total mix, laid/rolled and compacted to required gradient and camber using 8 to 12 Tonne power roller complete all as specified and as directed by Engr - in - Charge. Note: (i) Unit rate quoted shall include the provision of bitumen, at 4.0% by weight of the total mix. No price adjustment shall be admissible if excess quantity of binder content (bitumen VG-30) is used/approved in the execution of work under this item. (ii) Area should be calculated on Simpson's rule & volume should be calculated on Prismoidal Formula. (iii) Priming/Tack coat will be measured and apid separately.
Material and labour for bituminous premixed semi-dense asphaltic concrete 40 mm consolidated thickness with 5.5% binder (paving bitumen VG-30) content by weight of total mix, spread evently with mechanical paver to desired thickness and to the correct camber, rolled and compacted to required camber and gradient with using 8 to 12 Tonne power roller complete all as specified and as directed by Engr - in - Charge. Note:- (i) Premix SDAC shall be produces from Hot mix plant. (ii) Minimum binder content shall be 5.5% by weight of total mix. However, in case more than 5.5% binder content is required as per design mix, the same shall be provided by the contractor at no extra cost.
M&L for preparing & cleaning new/existing black bitumenous surfaces of road by removing all dirt, seals, oil, grease and foreign material etc. with coir brushes or other means as required and applying 2.5 mm thick thermoplastic road marking paint using an applicator machine to form traffic strips such as lines, dashes, arrows, letters etc. with surface application of reflectorising glass beads as per manufacturer instructions complete all as specified and as directed. Note:- The road marking paint shall be conform to BS 3262 Part-I & II of 1989.
Supply and fixing in repairs Cat eye raised pavement marker of size 100 x 100 x 20mm made of polycarbonate body consisting of retro reflective micro prismatic though polycarbonate lens as approved by AGE (I). The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete all as directed by Engr-in-Charge.
M/S MBS TRADING CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .