Comprehensive development of road, Buildings & other allied works in Govindrajnagar Constituency under CMIDP for the year 2025-26 (Package-GRN-3)

Comprehensive development of road, Buildings & other allied works in Govindrajnagar Constituency under CMIDP for the year 2025-26 (Package-GRN-3)

Removing & Resetting of Footpath Slab.

Removing & Resetting of Kerb

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantle...

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...

Providing and fixing Precast reinforced cement concrete covering slabs of 10cm thick made out of M25 with OPC cement @ 340kgs/cum, with 20mm downsize graded metal coarse aggregates @ 0.70cum and fine...

Providing and fixing Precast reinforced cement concrete covering slabs of 23cm thick made out of M25 with OPC cement @ 340kgs/cum, with 20mm downsize graded metal coarse aggregates @ 0.70cum and fine...

Providing and fixing pre cast solid cement concrete kerb stones made out of M20 with top and bottom width 114 and 165 mm respectively, 400mm high and 450mm in length finished with CM 1:3 plastering an...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0....

Wet Mix Macadam (Plant mix method)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...

Tack coat on Bituminous surface

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned ...

Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight of total...

Providing and laying Bituminous Concrete with not less than 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.78% Bitumen and waste plasti...

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggre...

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...

Cost Of Haulage Excluding Loading and unloading of stone Boulder /Stone Aggregates/ sand/ Kanakar /Moorum.(Tipper 10m3) (Tacking output 18 t load and lead 10km)lead For 20km t.km

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat o...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and Fixing the Tensile Membrane made from germany make mehler valmex FR900-Type-II with 100% White colour, PVDF-Lacquer on both sides, Protected Against Microbal and Fungal Attack, UV-Protec...

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...

Supply and Fixing of 25 MM EPDM: Providing & Laying of EPDM (Ethylene Propylene Diene Monomer) Safety &. Sports total 25MM [ 19 MM SBR & 6 MM EPDM ] thick Rubber flooring systems comprising two layers...

Supply of 3mtrs Painted Hot Dip Galvanised MS pole with 1 Nos of 30W-50W LED Light and Strip Wattage of 20W, Dimension of Pole 2mm to 2.5mm gauge with 3mtr 100mm Pipe With Body any colour with single...

Providing PVC Dustbins of 3 Feet Height

Supply and Fixing of Seated Chest Press: All products must test and certified to meet EN16630 safety standards with GS test marthe EN16630 certificates must be issued by a reputed notified Internation...

AIR WALKER(Moon walker) (Area 4'x3' Height -4') This equipment is made up of 100mm NB Heavy gauge pipes the foot step are made up of alluminium castings this healps in strenthening and toning the legs...

Self weighted Rower (Rowing machine) Area 3'x3' Height- 3'6" (All tubular steel of 2.5mm thickness are galvanized and Zincdipped. All welded joints are scalloped as necessary and welded All welds are ...

Bicycle (Exercise Cycle) (Area -4'x3', Height-4') This is a stationary cycle made up of Central pillar 100mm pipes The seat is mage up of FRP. Thisequipment gives the benefits of Cycling and inproves ...

Supply and Fixing of Leg Stretch: All products must test and certified to meet EN16630 safety standards with GS test mark. The Ex16630 certificates must be issued by a reputed notified International C...

Standing Rotation (Area-6'x3' Height 4'6"): Providing and fixing standing rotation made up of 100mm NBMS pipe the sub structure consists of 32mm NBMS Pipes and heavy duty self Greased SKF bearing and ...

TAI CHI SPINNERS (Area 5'x5' Height -4') The Tal-chi spinners are made up of 100mm NB MS pipe the substructure consists of 25 and 20mm NB MS pipe and heavy dutyself greased SKF bearings and bushes pro...

Supply & fixing of Double Ski Walker : All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified Interna...

Supply & fixing of Arm & Pedal Bike : All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified Internati...

Supply & fixing of Elliptical Cross Trainer: All products must tested and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified In...

Supply and Fising of Big Shoulder Wheel: All products must test and certified to meet EN16630 safety standards with GS test mars The EN16630 certificates must be Issued by a reputed notified Internati...

Squat pushing (Leg Press) Area-3'X4', Height-7' Supply and fixing of HD Squat pushing metal: all tubular steel of 2.5mm thickness are galvanised and zinc dipped all welded joints are scalloped as nece...

Supply and Fixing of Puppy/Elephant/Horse/Bike Rider: All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified Internat...

Supply and Fixing of 2 Seater See Saw: All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifyin...

Supply and Fixing of Fiero A Swing: All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by.a reputed notified International Certifying B...

Supply and Fixing of Merry Go Round DX: The Merry go round consists of a round platform which is made of galvanized steel dand has a thickness of 2.5 mm. It is also power coated with the thickness of ...

Supply and Fixing of Hexa Climber: All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Bo...

Supply & fixing of children multi play equipment VIVA KPS 905A E PVC All products must be tested and certified to meet EN 1176 safety standards The EN 1176 certificates must be issued by a reputed not...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

M25 Concrete For Roof Slab (FF)

M25 Concrete For Roof Slab (SF)

M25 Concrete For Roof Slab (TF)

M25 Concrete For Columns

M25 Concrete For Columns (FF)

M25 Concrete For Columns (SF)

M25 Concrete For Columns (TF)

M25 Concrete For Lintel Beam (GF)

M25 Concrete For Lintel Beam (FF)

M25 Concrete For Lintel Beam (SF)

M25 Concrete For Lintel Beam (TF)

M25 Concrete For Chajja (GF)

M25 Concrete For Chajja (FF)

M25 Concrete For Chajja (SF)

M25 Concrete For Chajja (TF)

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ( Pwd Sr 2023-24 Vol-02 Page No 9 Item No 5.4 )

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

6 inch Block for Wall (FF)

6 inch Block for Wall (SF)

6 inch Block for Wall (TF)

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Providing & fixing of 2.5 track * 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. (vol-2 P.No. 107, I.No. 12.68.3 of PWP & IWTD SR 2023-24)

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (vol-2 P.No. 107, I.No. 12.6...

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Granite Flooring (FF)

Granite Flooring (SF)

Granite Flooring (TF)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and run...

25 mm dia 2 mm thick (UNI SR 2023-24, Vol-6, P-02, 1.2.2)

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks ...

25 mm dia 2 mm thick (UNI SR 2023-24, Vol-6, P-02, 1.3.2)

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified ...

Point wirin usin Coer wire without switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire)...

Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box (UNI SR 2023-24, Vol-6, P-05, 2.2.2)

Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box (UNI SR 2023-24, Vol-6, P-05, 2.2.3)

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing...

6 Module (UNI SR 2023-24, Vol-6, P-08, 3.5.1)

8 Module (UNI SR 2023-24, Vol-6, P-08, 3.5.1)

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

6A Two Way Switch (UNI SR 2023-24, Vol-6, P-09, 3.6.2)

6A Three Way socket (UNI SR 2023-24, Vol-6, P-09, 3.6.3)

Stepped Fan Regulator Two Module (UNI SR 2023-24, Vol-6, P-09, 3.6.3)

32A DP Switch (UNI SR 2023-24, Vol-6, P-09, 3.6.9)

TV/Telephone Socket (UNI SR 2023-24, Vol-6, P-09, 3.6.11)

Supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws 110 mm (UNI SR 2023-24, Vol-6, P-09, 3.10.3)

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified ...

Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using...

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Batten Holder (UNI SR 2023-24, Vol-6, P-10, 3.14.7)

Supplying and fixing of round or oblong type bulk head fitting glass cover (UNI SR 2023-24, Vol-6, P-53, 12.53)

Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI grater than 70%. efficacy grater than 80 lumen per W, life gra...

Supplying and Fixing........mm dia clampsss A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL ...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded pol...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm) (UNI SR 2023-24 ,VOL-6 (Part-3) ,P-30 , Sl.no 6.2.1)

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball ...

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. (UNI SR 2023-24 ,VOL-6 (Pa...

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution)

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of...

Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947.

Supplying and fixing HRC fuse link on existing switch fuse base with W loss as per IS-13703.

Fixing of ..... A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.

100A to 250A TPST (UNI SR 2023-24 ,VOL-6 (Part-3) ,P-57 , Sl.no 13.18.2)

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3...

I - Single Door 8 Way SP & N (UNI SR 2023-24 ,VOL-6 (Part-3) ,P-18 , Sl.no 5.19.3)

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking c...

6-32 A DP (UNI SR 2023-24 ,VOL-6 (Part-3) ,P-17 , Sl.no 5.18.4)

50-63 A TPN (UNI SR 2023-24 ,VOL-6 (Part-3) ,P-17 , Sl.no 5.18.9)

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage cu...

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meterr (UNI SR 2023-24 ,VOL-6 (Part-3) ,P-19 , Sl.no 5.30)

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter (UNI SR 2023-24 ,VOL-6 (Part-3) ,P-19 , Sl.no 5.35)

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (UNI SR 2023-24 ,VOL-6 (Part-3) ,P-19 , Sl.no 5.38)

Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter (UNI SR 2023-24 ,VOL-6 (Part-3) ,P-19 , Sl.no 5.29)

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. (UNI SR 2023-24 ,VOL-6 (Part-3) ,P-19 , Sl.no 5.34)

Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which ar...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equip...

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable.

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit sho...

Providing and placing on terrace(at all floor levels), polyethylene water storage tanks as per IS 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet ...

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore (P.No. 114, I.No. 13.2.2 of PWP & IWTD SR 2023-24,Vol-II )

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore(P.No. 114, I.No. 13.3.2 of PWP & IWTD SR 2023-24Vol-II )

Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia.(P.No. 118, I.No. 13.22.1.1of PWP & IWTD SR 2023-24,Vol-II )

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgi...

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments. Size 50 mm (SR 2023-24 Volume-V P.No 154 Sl.No 13.25.1)

Supply and delivery at site wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI Union

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: For 50 mm dia GI elbow

Supply and delivery at site wrought middle steel (galvanized) GI hexagonal nipple confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI hexagonal nipple

Supplying and fixing 20" x 20" x 2.5" polished wood board made of not less than 15mm thick plank on both the sides with planks made out of not more than 2 pieces and fixing the same to the wall using ...

Supplying and fixing miniature circuit breakers on existing MCB distribution board using necessary fixing materials and 'C' type curve indicator ON/OFF energy cross-3 with short circuit breaking capac...

Supplying of TPST with rewindable porcelain channels in SM enclose made out of 14 SWG powder coated point of approved colour 32 amps (SR 2023-24 Vol P.no.14 / I no. 5.5.1)

Supplying and fixing LED type panel board indicating lamp with required colour suitable for 220 V AC 50 HZ 12/24 V DC. (SR 2023-24 Vol 6 P.no.19 / I no. 5.38)

Supping fully automatic star delta starter unit push button type with suitable wires 2 conductors and adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/440...

Supplying and fixing single phase presenter using necessary wires over an existing panel board suitable for mortar up to 20 HP capacities (SR 2023-24 Vol 6 P.no.14 / I no. 5.3)

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade multi strand copper conductor single core wire in open or concealed system of wiring as per IS 694:1990 & conforming to th...

Supplying fixing and wiring heavy duty low voltage capacitors conforming to IS 2834 phase 400/440 volts grade, for power factor improvement of rotating machinery. (SR 2023-24 Vol 6 P.no.19 / I no. 5....

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C cutouts and other equipment on the meter board using 40mm dia 2.90 thick GI pipe 2.5 Mtr long buried in a pit… The pit should b...

Supplying and fixing porcelain fuse channel with cut out on the existing wooden block and wiring complete 63 amps (SR 2023-24 Vol 6 P.no.14 / I no. 5.7.3)

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 65 mm nominal bore(SR 2023-24 Vol 2 P.no.117 / I no. 13.4.5)

Design, supplying, erecting testing and commissioning of - Passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine ...