Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-Finance | L1 | Accepted-Finance The bidder is 1st lowest as per comparative statement. | |
| 2 | L2₹2.5 L+₹3,365 (1.37%)Accepted-Finance | L2 | Accepted-Finance The bidder is 2nd lowest as per comparative statement. |
Tender Value
₹2.4 L
EMD Value
₹4,740
Closing Date
2 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER(CIVIL)
O/o the Executive Engineer (Civil), BSNL Civil Division, Jamshedpur at Dhanbad, 2nd floor, CTO building, Hirapur, Dhanbad-826001
Erection of 6.00 metre high self supporting roof top pole with maximum possible utilisation of spare MAR tower on Design Bureau building ( Admn. Bldg. campus) in steel plant at Bokaro. (Dhanbad BA)
2023_BSNL_155154_1
11/NIT/EE(C)/CDJ/2023-24
Open Tender
Civil Works
Item Rate
60 days
Sector 2, Bokaro
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Accounts officer (Cash), O/o GMTD, BSNL, Dhanbad
₹4,740
9 Jun 2023
24 May 2023
5 Jun 2023
24 May 2023
2 Jun 2023
24 May 2023
Amount
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
(a) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
Centering and shuttering including strutting, propping etc. and removal of form for :
(a) Columns, Pillars, Piers, Abutments, Posts and Struts
(b) Lintels, beams, plinth beams, girders, bressumers and cantilevers
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
(a) Thermo-Mechanically Treated bars of grade Fe-500D or more.
Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position to act as horizontal and cross bracing and applying a priming coat of approved steel primer all complete
Providing and fixing mild steel round holding down anchor bolts with nuts and washer plates complete.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
(a) In cable tray, pole mount brackets etc. frames, guard bar, ladder, railings, brackets, gates and similar works.
Providing and fixing pole mount of approved size i/c welding of its top and bottom bore by 5 mm thick plates including applying priming coat of approved steel primer. (5 mm thic plate will be paid in basic item)
(a) G.I. pipes
6 mm cement plaster of mix :
(a) 1:3 (1 cement: 3 fine sand)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
(a) Two or more coats on new work.
Cutting holes up to 45 x 20 cm in walls including making good the same:
(a) With common burnt clay F.P.S. (non modular) bricks.
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :
(a) 3 mm thick
Dismantling of MAR tower situated at different location upto 50 KM in Bokaro district and transportation of dismantled tower material by mechanical means including loading, unloading and stacking from dismantled site to TE campus at sector 02 Bokaro all complete as per direction of the Engineer-in-Charge.
Transportation of MAAR tower from sector 02 TE campus to D block building in steel plant Bokaro including loading, unloading and stacking all complete as per direction of the Engineer-in-Charge. (1st and 2nd leg of each three MAAR tower to be transported and rest part i.e. 3rd to 5th leg of each MAAR tower to be handed over to concerned authorites at sector 02/04 store)
labour charges for lifting and stacking of MAR tower member, antena mount, cable tray, ladder, angles section etc.on roof top with necessary arrangement etc. as per direction of the Engineer-in-Charge.
Labour charges for fabrication ,erection and fixing of pole (MAR) tower structure including feeder cable tray, anteena mounts, ladder etc. on top of roof as per standard / approved drawing & scheduled i/c tightening of nute, bolts and washer etc. The pole(MAR) tower shall be fabricated for more stiffness with angle section, plates, flats etc. and fixing horizontal bracing on top, middle, bottom and at least one cross bracing in ech face to all three pole (MAR) leg. all complete as per direction and satisfaction of the Engineer-in-Charge.
Supply of galvanised Nut bolt as per required size for pole (MAR) tower as per direction and satisfction of Engineer-in-charge.
Dismantling RCC in existing slabs and beams upto its top reinforcement at rest point of tower stem and its connecting beam with manual Chisel and/ or by standard power driven percussion type, tapering of all edges, making square shoulders of cavities, cleaning the exposed concrete surface and reinforcement with wire brushes etc. and welding by gas or electric plant of stem and cnnecting beam's reinforcement to existing reinforcement to each other etc. all complete as per direction of Engineer-In-Charge.
Wages charge of 08 (Eight) nos labour to attend full day safety training which is mandatory for two days and completed as per norms of safety procedure providing free of cost by the safety department of Steel Plant Bokaro for working in plant campus.
SRIJAN CONSTRUCTION & CONSULTANCY
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .