Loading
Loading…
Loading…
Tender Value
₹2.4 L
EMD Value
₹5,000
Closing Date
31 Jul 2026, 6:00 pm6d left
Executive Engineer (AM), Malda-II (AM) Division
Executive Engineer (AM), Malda-II (AM) Division, Madhabnagar, Mokdampur, Malda, Administrative Building (1st Floor), Mokdampur-732103, Malda.
Repairing of Twin Hull Steel Barge of Kutubganj - I Major RLI Scheme at Mouza- Pukhuria, JL. No-144, Plot No.-3006 in Ratua -II Block of Ratua (Agri-Mech) Sub-Division within Malda-II (Agri-Mech) Division,Malda under Non-Plan Programme.
2026_WRDD_1033369_6
WRDD/EEAM /MLD-II /NIT-01e/26-27
Open Tender
MECHANICAL
Percentage
90 days
Ratua (A-M) Sub- Division
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,000
20 Jul 2026
20 Jul 2026
3 Aug 2026
21 Jul 2026
31 Jul 2026
21 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Shifting of Barge to a suitable working site or place from the R.L.I. Site & blocking of Barge by area clearance, earth cutting, Winching, Jacking, Planking, block fixing and un jacking and placing at the R.L.I. site including tools and plants for blocking. | 1 | Each | 4,973 | ₹4,973 |
| 1.02 | Removing the pump set installed on the barge from the foundation including disconnection of electrical connection, removal of suction and delivery assemblies from the barge to a secured place and refitting of the same properly and connection the electrical connection after the maintaince of the barge. | 1 | Each | 1,446 | ₹1,446 |
| 1.03 | Opening straightening and refitting the plates, angles, purloins, trusses, bollare, expanded metal/ B.R.C. net, winch etc. as required as per direction of the E.I.C. | 1 | Each | 1,084 | ₹1,084 |
| 1.04 | Acid treatment for removing rust corrosion etc.from the surface both inside and outside as per direction of the E.I.C. | 96.56 | Sq. mt. | 5.2 | ₹502.11 |
| 1.05 | Chipping , scraping wire brushing and cleaning of the painted surface of keel, hull,frame, superstructure deck, fender both inside and out side as per direction of the E.I.C. | 1 | Each | 1,446 | ₹1,446 |
| 1.06 | Patch/ doubling work complete with 5 mm thk M.S. plate including welding, gas cutting, fitting, fixing complete. (a) Cost of 5 mm thk M.S. plate including wastage due to cutting, labour charge for straighting, fitting fixing in position. | 14.98 | Sq. mt. | 3,503 | ₹52,474.94 |
| 1.07 | (b) Gas cutting to required size of upto 8 mm thk M.S. plate, N.S>C. channel etc. including labour charges , higher charges of all tools and plants. | 92.44 | Sq. mt. | 234 | ₹21,630.96 |
| 1.08 | (c) Electric welding charge for 5 mm thk M.S. plate, M.S> channels etc. and other member of the barge including hire charges of all tools and plants. | 92.44 | Sq. mt. | 547 | ₹50,564.68 |
| 1.09 | M.S. structuarl work in roof trusses etc with the following rolled structural members viz. angle, flat, bars etc. weighing less then 22 kg./ m connection to one another with brackets, cleats, bolts & nuts etc. as per design and direction complete including febrication hoisting & erection. (a) Suppling, fitting & fixing of M.S. angle for post rafter purloin etc and for joining the two hulls at both ends including gas cutting etc. (i) 45 mm x 45 mm x 6 mm | 10.36 | mtr | 316 | ₹3,273.76 |
| 1.1 | (b) Suppling, fitting & fixing of M.S. flat bar including gas cutting etc. (i) 40 mm x 6 mm for straightening of B.R.C. net etc. including gas cutting. | 14.36 | mtr | 176 | ₹2,527.36 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.55 MB
Tendernotice_2.pdf
PDF • 0.94 MB
Tendernotice_3.pdf
PDF • 0.96 MB
BOQ_2537938.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].