PROVN OF E/M SERVICES FOR 29 DUs CONSTRUCTED BY DMRC AGAINST EVI AT VSB AT AF STN TUGHLAKABAD

Material and labour for point wiring concealed type with PVC insulated, unsheathed, single core multistranded copper conductor cable ISI marked (FRLSH) of size 2.5 Sqmm, 1100 volts grade including 2.5 Sqmm PVC insulated, unsheathed, copper conductor cable ISI marked for earth continuity wire to be drawn through in and including suitable size PVC conduit medium grade ISI marked with its accessories & new pressed steel terminal boxes, cover frame and brass screws with cup washers suitable for modular type fittings for fixing of modular switches / sockets / regulators etc. including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 for One socket outlet 16 Amps independent board complete all as per IS specification as specified and as directed. NOTE :- New pressed steel terminal boxes, cover frame and brass screws with cup washers suitable for modular type fittings shall be measured and paid for separately as per relevant item of GI box suitable for modular switch sockets and modular cover plate with frame suitable for modular switch sockets

All as per Item No. 1.00 above but One 3 pin socket out let 15 Amps on independent board point.

Material and labour for modular socket outlet 6A/16A, 2/3 pin combined 2 module complete all as specified and as directed.

Material and labour for modular switch 1 way 15/16 Amps 1 module, suitable for 230 Volts Ac supply complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece with thermal cutoff suitable for AC supply, 50 HZ complete and 02 Nos angle valve complete all as specified and directed.

Supply and fix following size GI tubing medium grade size 15 mm with all fitting and fixed complete to walls and ceiling or laid in floors of size including all accessories such as tee,bend,elbow,and union etc taking down the existing pipes and connections including making good to disturbed surface of wall and match with the existing one (ISI marked) complete all as specified and directed.

Supply and fixing in replacement PVC connection 15 mm bore , 600 mm long with brass ends terminals suitable for Geyser complete all as specified and as directed.

Supply and fixing Bib tap of size 15 mm, cast copper Alloy with clutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply & installation of 15 high mast shaft in two section suitbale for 55 m/sec wind speed along with head frame, luminiaries carriage suitable for 12 LED 200 watt luminiaries in symmetrical arrangement and other accesories manufactured in factory with raising lowering system comprising double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightining finial, (Wiring material from JB to individual luminiare & MCB in base compartment are not included and are a part of installation), with supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template and outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminiaries, power tool control with 2 No 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5sq. mm terminals. 16M High mast of BAJAJ Make or equivalent in GE, Crompton, Philips, Havells.

HIGH MAST SYSTEM MAKE : Bajaj Electricals Ltd or techno commercially equivalent Height of mast : 15 Meter No. of Section : Two Material Construction : S355 Grade as per BS-EN10 025 Base dia and top diameter (A/F) : Top : 150mm Botton : 460 mm Cross section of Mast : 20 side polygon Standard for Galvanisation : A per BS EN ISO 1461 Size of Opening and door at base : 1200 x 250 mm Diameter of base plate : 670 mm Thickness of base plate : 25 mm Lighting protection finial : GI single spike of length 1200mm Max. wind speed : 44m/s as per IS 875 (Part III) Number of foundation bolts : 12 Nos PCD of foundation bolts : 590 mm Type / diameter / length of found ation bolts : TS 600/30mm dia/ 850 mm long