REPAIR AND MAINT OF INTERNAL WIRING, FITTING, FIXTURES AND OTHER CONNECTED WORKS AT JINDRAH UNDER GE ARMY DHAR ROAD UDHAMPUR

Amount

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring aluminium/ copper from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets,bell push , ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1:3) or plaster of Paris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.

M&L for concealed point wiring on wall and ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 20 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screws and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of Paris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following:-

One light /Fan/Bell point controlled by one switch 6/5 Amp one way single pole.

One 3 pin socket outlet 6/5 Amps controlled by one switch on the same board with other switches.

One 3 pin 6/5 Amp socket outlet controlled by one switch on independent board.

All as per item No 2 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed.

S&F switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 Volts complete all as specified and as directed. Make : Anchor/Havells/Cona

S&F switch piano flush type (ISI marked), single pole, one way 16/15 Amps, 240 Volts including complete all as specified and as directed.Make : Anchor/Havells/Cona

S&F socket outlet 3 pin, 6 Amp piano flush type including complete all as specified and as directed. Make : Anchor/Havells/Cona

S&F socket outlet, 2 in 1, 3/5 pin 6 / 16 Amp, piano flush type complete all as specified and as directed Make : Anchor/Havells/Cona

S&F bell push 5/6 Amps SP flush type complete all as specified and as directed. Make : Anchor/Havells/Cona

S&F ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals complete all as specified and as directed. Make : Anchor/Havells/Cona

S&F for batten angle lamp holder insulated body with back plate suitable for batten fittings including complete all as specified and as directed.Make : Anchor/Havells/Cona

S&F Ding dong sound door call bell electric AC 240 volt, 50 Hz ding dong type including taking down unserviceable complete all as specified and as directed. Make : Anchor/Havells/Cona

Supply & Fixing medium step type fan regulator , 240 Volt AC, socket size, medium step" ISI marked complete all as specified and directed. Make Cona / Anchor/Havells/Crabtree

M&L for sub main wiring in replacement of worn out aluminium conductor wire with two run of FR PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 6.0 Sqmm, 1100 Volts grade and one run of 4.00 Sqmm FR PVC insulated unsheathed as earth wire (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS-694 with latest amendments and drawn in PVC rigid conduit complete in all respect all as specified and directed. Make of wire : Havells/Finolex/Polycab. Note :- 1. Two run of single core cable with one run of continuous earth wire of copper conductor shall be measured and paid as one unit length. 2. PVC conduit shall be measured and paid for separately.

M&L for sub main wiring in replacement of worn out aluminium conductor wire with two run of FR PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 4.0 Sqmm, 1100 Volts grade and one run of 2.5 Sqmm FR PVC insulated unsheathed as earth wire (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS-694 with latest amendments and drawn in PVC rigid conduit complete in all respect all as specified and directed. Make of wire : Havells/Finolex/Polycab. Note :- 1. Two run of single core cable with one run of continuous earth wire of copper conductor shall be measured and paid as one unit length. 2. PVC conduit shall be measured and paid for separately.

M&L for sub main wiring in replacement of worn out aluminium conductor wire with two run of FR PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 10.0 Sqmm, 1100 Volts grade and one run of 6.0 Sqmm FR PVC insulated unsheathed as earth wire (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS-694 with latest amendments and drawn in PVC rigid conduit complete in all respect all as specified and directed. Make of wire : Havells/Finolex/Polycab. Note :- 1. Two run of single core cable with one run of continuous earth wire of copper conductor shall be measured and paid as one unit length. 2. PVC conduit shall be measured and paid for separately.

S&F in replacement non metallic rigid PVC conduit ISI marked, conforming to IS 9537, medium grade of size 20 mm dia including all fittings like bends, elbows, reducers, junction boxes, tees, bell mouth all fixing accessories such as coupler lock, nuts, saddles pipe hooks etc complete including cutting & chasing required on brick wall or conc surfaces not exceeding 10 cm in girth for concealed conduit wiring and making good to disturbed surfaces with cement mortar 1:3 and distemper / colour wash etc to match with existing surfaces including facing / finishing complete all as specified and directed. Make of conduit : Plaza/Kalinga/AKG

S&F in replacement non metallic rigid PVC conduit ISI marked, conforming to IS 9537, medium grade of size 25 mm dia including all fittings like bends, elbows, reducers, junction boxes, tees, bell mouth all fixing accessories such as coupler lock, nuts, saddles pipe hooks etc complete including cutting & chasing required on brick wall or conc surfaces not exceeding 10 cm in girth for concealed conduit wiring and making good to disturbed surfaces with cement mortar 1:3 and distemper / colour wash etc to match with existing surfaces including facing / finishing complete all as specified and directed. Make of conduit : Plaza/Kalinga/AKG

S&F in replacement non metallic rigid PVC conduit ISI marked, conforming to IS 9537, medium grade of size 32 mm dia including all fittings like bends, elbows, reducers, junction boxes, tees, bell mouth all fixing accessories such as coupler lock, nuts, saddles pipe hooks etc complete including cutting & chasing required on brick wall or conc surfaces not exceeding 10 cm in girth for concealed conduit wiring and making good to disturbed surfaces with cement mortar 1:3 and distemper / colour wash etc to match with existing surfaces including facing / finishing complete all as specified and directed. Make of conduit : Plaza/Kalinga/AKG

S&F service connection with twin core 10 Sqmm 240 volts heavy duty un armured PVC insulated stranded aluminium conductor cable with GI supporting wire of suitable size in replacement of old unseriveable conductor cable complete. Make : Plaza /Polycab/Havells/finolex

S&F service connection with twin core 6 Sqmm 240 volts heavy duty un armured PVC insulated stranded aluminium conductor cable with GI supporting wire of suitable size in replacement of old unseriveable conductor cable complete. Make : Plaza/Polycab/Havells/finolex

S&F in replacement of old unserviceavle DB by SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way, confirming to IS 13032 & 8623 complete all as specified and directed. Cat No. 507610 of make legrand or equivalents of Schneider (Electric)/L & T .

S&F in replacement of old unserviceable DB by SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way, confirming to IS 13032 & 8623 complete all as specified and directed. Cat No. 507611 of make legrand or equivalents Schneider (Electric)/L & T .

S&F in replacement of old unserviceable DB by SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 12 way, confirming to IS 13032 & 8623 complete all as specified and directed. Cat No. 507612 of make legrand or equivalents Schneider (Electric)/L & T .

S&F in replacement of old unserviceable DB by TPN Distribution Box double door of protection grade IP 43, in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way, confirming to IS 13032 & 8623 including chasing/cutting of wall and concealed and making good as existing surface complete all as specified and directed. cat no 507782 of make legrand or equivalents of Schneider Electric/L & T

S&F in replacement of AC box by sheet steel enclosure in single pole and neutral fitted with two pin and earth plug and socket complete with one single pole MCB, 240 volt, 20 Amps , 'C' series of suitable rating complete all as specified and directed . cat no 507811 of make legrand or equivalents of Schneider Electric/L & T.

Taking down old unserviceable old MCB TPN/SPN/SP all as specified and directed

S&F MCB four pole, 125 Amps 415 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Cat no 408705 of make legrand or equivalents of Schneider Electric/L&T

S&F MCB SPN, 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Cat no 408617 of make legrand or equivalents of Schneider Electric/L & T

S&F MCB SPN, 40 to 63 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Cat no 408618 to 408620 of make legrand or equivalents of Schneider Electric/L & T

S&F MCB SP, 06 to 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Cat no 408587 to 408595 of legrand or equivalents of Schneider Electric/L & T.

S&F MCB TPN, 63 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Cat no 408683 of legrand or equivalents of Schneider Electric/L & T.

S&F MCB TP, 63 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Cat no 408661 of legrand or equivalents of Schneider Electric/L & T.

S&F Wall mounted LED batten 18/20 Watt with 01 No LED tube rod, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver including dismantling and taking down unsv FTL fitting T8 type any type complete all as specified and directed. Make: Crompton Cat Part No LDL-20-CDL or equivalent in Philips/WIPRO

S&F Wall mounted Mirror light LED fitting, 10 Watt, 2 Feet long incl integrated electronic driver including dismantling and taking down unsv sketch fitting any type complete all as specified and directed. Make: Crompton Cat Part No LDL-10-CDL or equivalent in Philips/wipro

S&F LED building security light 20 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade suitable size dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismantling and taking down unsv fitting any type all as specified and directed. Make-CROMPTON cat no LST-20-CDL-M or equivalent in WIPRO/Philips

S&F Bulk head fitting 10 watt LED incl water proof , weather proof all as specified and directed in replacement of old unserviceable fitting. Cat No LBHP-10-CDL of crompton make or equivalents of philips/wipro

S&F LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismantling and taking out unsv CFL/LED Bulb. Make - Philips/wipro/Havells/crompton

S&F in replacement of Mirror optic fitting by recess mounted mirror optic LED luminaire fitting not less than 100 lumen/watt , 30 watt, dimension 600mm x 600mm fitting for grid type ceiling including control driver and other accessories complete all as specified and directed. cat No LCTLRNE-30-FO-CDL OF MAKE CROMPTON OR EQUIVALENTS OF Philips/wipro/Havells

S&F in replacement of Mirror optic fitting by recess mounted (LED Stellux-P) mirror optic LED luminaire fitting not less than 100 lumen/watt , 36 watt, dimension 600mm x 600mm fitting for grid type ceiling including control driver and other accessories complete all as specified and directed. cat No LCTRP-36-CDL OF MAKE CROMPTON OR EQUIVALENTS OF Philips/wipro/Havells

M&L for earthing with galvanized iron earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nuts, bolts, reducer, nipple, wire mesh, screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the brick masonary including excavation works, refilling, connected to main switch/MCB DB complete all as specified and as shown in electrical plate No. 3 of SSR Part-I and testing of earth resistance as required including test point. Note : Earthing lead/G.I.earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately).

K S BUILDERS

HIMALAYA ENTERPRISES

m/s shanti trading company

KARAN TRADERS

Rakesh Kumar Malia

M/S BHARAT LIGHT ELECRIC.CO

Harsh Electricals