SMART PERIODICAL SERVICES IN VARIOUS BUILDINGS, REPAIRS/MAINT OF JOINERIES AND CONNECTED WORKS, REPAIRS/MAINT OF SANITARY FITTINGS, PLUMBING AND FLOORS OF WASHROOM, REPAIRS/MAINT OF SERVICE WATER TANK INCLUDING CLEANING OF SERVICE WATER TANKS AT BASR

Amount

M&L for preparation old surfaces of plastered or unplastered old decorated surfaces of walls by brooming down and applying one coat of oil bound distamper including cornices, pilasters etc, complete all as specified and directed.

M&L for preparation old surfaces of ceiling by brooming down and applying one coat of white wash, complete all as specified and directed.

M&L for complete removal of existing treatment of internal wall surfaces and applying two coat of oil bound distemper over and including 2 mm thick wall care putty complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall, chajjaa, facia and similar work etc. and applying one coat of 100% acrylic exterior emulsion paint, complete all as specified and directed.

M&L for preparing of previously painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed.

M&L for preparing of previously painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and as directed.

Writing letters or figures (block, roman, italic or Indian) exc. 15cm and n. exc. 30cm high, complete all as specified and as directed.

Taking down cement plaster on brick/concrete surfaces of any description in any position incl racking out joints, hacking for key, scrubbing down with water etc and removing rubish off the premises, complete all as specified and directed.

M & L for rendering 10mm thick on brick work or concrete, surfaces of wall in CM (1:6), finished the surface even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick work or concrete, surfaces of wall in CM (1:4), mixed with water proofing compound as per manfacturer's instration and finished even and smooth without using extra cement, complete all as specified and directed. (Note: WPC shall be measured and paid seperately against respective item as suppy only.)

M&L 5mm thick rendering in CM (1:3) on fair faces of ceiling surfaces, finished even and smooth (without using extra cement), complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper over and including a coat of 2mm thick wall care putty, complete all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for complete removal of existing treatment of old painted surfaces of wall by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"- 9" including cleaning, watering etc to make the surface free form dust loose paint etc, filling cracks up to 5 mm with creak fill past (elastomeric past, as per manufacturer of paint) and applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer with fully automatic airless spray machine with flow speed of min 1 ltr mimetic having pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed. (Note:- Cost for necessary scafolding, safety & protective measures, insurance & paper marking tape etc shall deemed to be included in the unit quoted rate).

Supply only liquid water proofing compound of approved make (ISI marked), complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) not exc. 1.5 Sqm each., complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc. 4 Sqm each, complete all as specified and directed.

Taking down shutter of any description exc. 1 Sqm but n.ex.c 2 Sqm each, complete all as specified and directed.

Taking down shutter of any description exc .1 Sqm & n.exc. 2 Sqm each and refixing in same opening, complete all as specified and directed.

S&F in repair prelaminated particle board 12mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work, complete all as specified and directed.

S&F 125 X 60mm size factory made pressed steel frames for doors, made out of 1.25mm thick PBI sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F 105 X 60mm size factory made pressed steel frames for doors, made out of 1.25mm thick PBI sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawings, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F MS holdfast made up of FI 25 x 3mm conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed.

S&F 35mm thick (factory made), 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats, complete all as specified and directed.

S&F 35mm thick factory made glazed and skelton shutters of 2nd class hardwood open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass/guage etc, complete all as specified and directed.

Supply and fix 100mm size mild steel butt hinges medium weight cold rolled, complete all as specified and directed.

Supply and fix for 150mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and directed.

S&F for 75mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21, complete all as specified and directed.

S&F for 150mm long aluminium handles, cast type, anodised, complete all as specified and directed.

S&F in repairs, mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate of length of bolt of 250mm, complete all as specified and directed.

S&F aluminium alloy, anodised,sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy, complete all as specified and directed.

M&L for preparation of wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over one coat of pink primer, complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm as in doors or windows with necessary nails and fillets), complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm as in doors or windows with necessary nails and fillets), complete all as specified and directed.

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane, complete all as specified and directed.

S & F 4mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm each pane, complete all as specified and directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding (but not backing) and removing rubbish off the premishes, complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles of size 300 x 200 x 7mm/450 x 300 x 7mm thick each as in skirting or dado on vertical surfaces of wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed

M & L for 25mm thick PCC (1:2:4), type B-0, (using 12.5mm graded crushed stone aggregate), as in sub base for flooring etc., complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for joint free white non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

S&F in repair vitreous china squatting pan, ‘orissa’ pattern, size 630x 450mm white, with integral foot rests, and lime concrete bedding etc. (excluding flushing cistern and flush pipe), complete all as specified and directed

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let, ball valve, float and handle, complete all as specified and directed.

S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure, screwed for iron pipe & fixed (minimum weight 90gms), complete all as specified and directed.

S&F GI tubes of 15mm bore medium grade with all fitting and fixed complete to walIs and ceilings or laid in floors including taking up or down old unserviceable GI tubing, complete all as specified and directed.

S&F in repair pillar taps 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fency type, complete all as specified and directed.

S&F in repairs bib tap 15mm bore, fancy type, chromium plated, with crutch or butterfly handle, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs 15mm bore, fancy type, chromium plated, stop valves, with long shank and cup concealed type, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair shower rose 125mm size, brass, chromium plated, with or without swivel joints including fixing to 15mm bore steel pipe or union, complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

Demolition of reinforced cement concrete(reinforcement cut as required to facilate demolition) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank including 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank including 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank, complete all as specified and directed.

S&F in repair 20mm bore ball brass valves high pressure, with polythene float & fly nuts complete screwed for iron pipe or union, complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Disconnecting existing tanks (exc. 500 ltr & not exc 1000 ltr), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position, complete all as specified and directed. (Note : Cleaning, repairing etc shall be measured and paid seperately.)

Cleaning and removing all scale and dirt etc, from tanks of capacity exc 500 ltr & n.exc 1000 ltr, and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item "Tank Cleaned on ____" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed.

Cleaning and removing all scale and dirt etc, from tanks of capacity exc 250 ltr & n. exc 500 ltr, and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item "Tank Cleaned on ____" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed.

Removal of vegetation/grass etc including cutting holes into or through brick walls/concrete and removal of small trees/woods etc and making good distrubed surfaces with cement with PCC (1:2:4) type B-0 (using using 12.5mm graded crushed stone aggregate), surface area n. exc. 0.5 Sqm, complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing to waste pipe fixed in PCC (1:2:4) type B-1, complete all as specified and directed.

Taking down carefully ceiling fans / exhaust fans /pedestal fan/ wall mounted fan from any height and of any make and sweep including disconnecting the cable from ceiling rose and Deposited to MES store for repair/Replacement and refixing the same, complete all as specified and directed. Note : Replacement of spare parts, rewinding, painting, cable for connection etc to be measured and paid separately.

S&F in repair of switch piano flush button 5 Amp single pole one way 230 volts white finish, complete all as specified and directed.

M&L in repair and connecting up fan regulator electronic on existing phenolic laminated sheet dimmer type 230 volts, 450 watts suitable for ceiling fan 1200/1400mm sweep, complete all as specified and directed.

S&F in repair modular/delux type fan regulator (2 module), AC 230 Volts, complete all as specified and directed.

M & L for preparation of old painted surfaces of ceiling fan of any make and size up to 1400mm sweep and applying one coat of synthetic enamel white paint (1st grade quality) by spray painting including marking of MES No on bottom of fan by applying black synthetic enamel paint, complete all as specified and directed.

M & L for preparation of old painted surfaces of exhaust fan of any make and size up to 450mm sweep and applying one coat of synthetic enamel gray paint (1st grade quality) by spray painting including marking of MES No by applying black synthetic enamel paint, complete all as specified and directed.

M & L for replacement of short circuit/over heated winding from stator of ceiling fan/pedestal fan/wall mounted fan of any make having up to 1200mm sweep with matching gauge and turns, using super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking, heating, drying, cleaning fan bearing/bushes, greasing, oiling, complete re asssembling of ceiling fan with testing etc, complete all as specified and directed.

All as per item No 73.00 here-in-before but 1400mm sweep, complete all as specified and directed.

All as per item No 73.00 here-in-before but exhaust fan of any make, upto 300mm sweep, complete all as specified and directed.

All as per item No 73.00 here-in-before but exhaust fan of any make, more than 300mm sweep and not more than 450mm sweep, complete all as specified and directed.

M&L for replacement of gun metal bush with suitable size, gun metal bush for ceiling fan of any make, size and sweep, complete all as specified and directed.

S & F in replacement of ball bearing No 6201-Z of ceiling fans, complete all as specified and directed.

S & F in replacement of ball bearing No 6202-Z of ceiling fans, complete all as specified and directed.

S & F in replacement of ball bearing No 6203-Z of ceiling fans, complete all as specified and directed.

S & F in replacement of ball bearing No 6204-Z of ceiling fans, complete all as specified and directed.

S & F in replacement of ball bearing No 6205-Z of ceiling fans, complete all as specified and directed.

S&F in replacement of canopy (top and bottom) of ceiling fans any make / size with canopy of matching colour, complete all as specified and directed.

S&F in replacement of down rod with clamps etc of ceiling fan with down rod of 15mm bore medium grade GI pipe 0.30 metre long with clamps, bolts, nuts, split pins washers of suitable size of approved quality, complete all as specified and directed.

S&F in replacement of down rod with clamps etc of ceiling fan with down rod of 15mm bore medium grade GI pipe 0.45 metre long with clamps, bolts, nuts, split pins washers of suitable size of approved quality, complete all as specified and directed.

S&F in replacement of capacitor of ceiling fans with capacitor having capacity 2.5mfd, 240 Volts, complete all as specified and directed.

S&F in replacement of capacitor of ceiling fans with capacitor having capacity 3.15 mfd, 240 Volts, complete all as specified and directed.

S&F in replacement of capacitor of ceiling fans with capacitor having capacity 4.0 mfd, 240 Volts, complete all as specified and directed.

S&F in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish, complete all as specified and directed.

S & F rubber bush insulator reel type suitable for fan hook of any type including taking out old one, complete all as specified and directed.

S&F in replacement of hanger clamp assembly of down rod for hanging of ceiling fan with nuts, bolts, washers and split pin, complete all as specified and directed.

S & F energy efficient 200mm PVC air ventilating fan, complete with louvers and making hole to the existing wall, making good to the disturbed surface as per existing and connecting wire up to nearest ceiling rose, complete all as specified and directed. (Make : Havells model No. Ventil Air DX HS white or equivalent model in Orient/Usha)

S&F energy efficient PVC wall mounted fan 300mm sweep, including fitting to existing wall, connecting to nearest electrical socket and making good as per existing including taking down unserviceable wall mounted fan from site and deposited to MES store yard , complete all as specified and directed. (Make : Havells model No. D' Zire Gray or equivalent model in Orient/Usha)

S & F wall mounted slim LED batten, with extruded aluminium housing, with integrated electronic LED driver with LED lamp, 20 Watt and connecting up, complete all as specified and directed.

S&F in replacement Recessed mounted LED light fittings, 36W (Size 2' x 2'), white / warm white colour (4500 K to 6500 K) ultra modern LED edgelit luminaire suitable for armstrong/grip/POP ceiling complete with seperate electronic driver and high brightness LEDs including LED lamp and connecting cable 3 core 2.5 sqmm up to nearest point, complete all as specified and directed.

S&F in replacement round type recessed mounting LED luminaire 15 Watt aesthetically designed, recessed mounted down light pressure die-cast aluminum heat sink & high efficiency long life COB LED mounted on MCPCB including making arrangment in ceiling as per the size of fittings and connecting twin core cable up to nearest point complete with Inbuit/separate electronic driver & high brightness LEDs Natural white colour , complete all as specified and directed.

S&F in replacement recessed mounted LED light fittings, 36W (Size 4' x 1'), white / warm white colour (4500 K to 6500 K) ultra modern LED edge0lit luminaire suitable for armstrong/grip/POP ceiling complete with seperate electronic driver and high brightness LEDs including LED lamp and connecting cable 3 core 2.5 sqmm up to nearest point, complete all as specified and directed.

S & F round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders, LED Lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

M & L wall mounted LED batten fitting, 4 feet long with integral LED driver, double side connection type including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

M & L for LED crystal glass tube rod 20W (suitable for existing G13 tube light fitting), complete all as specified and directed.

S & F LED decorative wall mounted light fitting made out of brushed nickel finish fixture with Opal Glass diffuser with 9 W LED lamp B22 base complete with all accessories pre-wired and icnluding connecting up with three core PVC insulated sheathed coppper conductor cable of size 23/00076, complete all as specified and directed.

Taking down carefully point wiring of any type, size and description from hard/ teak wood batten/through pipes/casing capping (light, fan, sockets and socket outlets etc) including removal of battens, pipes, plug sockets, socket outlets, switches, shades, ceiling roses, light fittings etc. complete and making good the disturbed surface to match with existing, complete all as specified and directed.

Taking down carefully sub main wiring of any nos of wire and size with earth wire from wooden batten/surface conduit/casing caping, complete all as specified and directed.

M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLSH) size 1.5 sqmm drawn in and incl PVC casing and caping with fixing accessories, to be fixed on wooden gutties or plastic rawal plug, for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet / modular plate incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.

All as per item No 104.00 here-in-before but one 3 pin 5 Amps socket point on the same board, complete all as specified and directed.

All as per item No 104.00 here-in-before but one 3 pin 5 Amps socket point on the independent board, complete all as specified and directed.

All as per item No 104.00 here-in-before but One bell/buzzer point controlled by one pushbutton on the same board with other switches or independent, complete all as specified and directed.

All as per item No 104.00 here-in-before but point wiring with 4.0 sqmm cable and 4.0 sqmm earth continuity conductor for 3 pin / 5 pin 15 Amps socket, complete all as specified and directed.

M&L for switch piano flush button single pole one way 6 amps 240 volts, complete all as specified and directed.

M & L for socket outlet 2 in 1, 3 pin 6 Amp flush type, complete all as specified and directed.

M & L for switch and socket combination 2 in 1, 6A flush type, complete all as specified and directed.

M & L for switch and socket combination 3 pin, 16 Amp, flush type, complete all as specified and directed.

M & L ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, complete all as specified and directed.

M & L for Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F stepped type electronic fan regulator flush type AC 230 volt suitable for any type of ceiling fan, complete all as specified and directed.

M & L for bell push, flush type 5 A, complete all as specified and directed.

M & L for bell electric heahy duty ding dong type 230 volts single pole, complete and all as specified.

M&L for submain wiring wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 4 Sqmm drawn in and including heavy duty PVC conduit not less than 20mm size including 4 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly, complete all as specified and directed. Note:-(a) Three runs of cable shall be measured as one length of sub main. (b) PVC casing-caping/PVC conduit and its accessories is deemed to be included in the unit quoted rate.

All as per item No 118.00 here-in-before but drawn in and including PVC casing/caping, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 4 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 8 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Triple Pole & Neutral (TPN), suitable for 4way, 415 volts, IP 43 & IK 09 with metal door fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

S&F MCB Triple Pole and Neutral (TPN) of capacity 65 to 70 Amps, 415 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

S&F MCB Single Pole and Neutral (SPN) of capacity 40 to 63 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

S&F MCB Single Pole (SP) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 1 0 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

Taking down existing light fitting carefully, set aside, and re-fixing after wiring, complete all as specified and directed.

Cutting chases, pinning in, making good to facings in stone concrete wall / blocks / slab where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting exc. 10cm but n.exc. 20 cm girth, complete all as specified and directed.

S & F energy saving, environment friendly & robust highbay light 150 Watt LED luminaire, PDC housing, indoor type white colour with system efficacy upto 150 lm/W alongwith LED driver and fixing on high Rise steel trusess including mounting arrangement fixed on celing with necessary hook/chain / hanging the fitting from ceiling /Roof/Angle Iron Frame structure including connecting with 2.5 Sqmm Single core multistranded copper conductor cable drawn through PVC flexible conduit from ceiling rose/connector to fitting, complete all as specified and directed. (Make : Havells Cat Part No. SAUCER GENXADVPROHBP 150W LED 857 PNBBORL or equivalent model in Philips/Bajaj) Note: Cost of necessary scafolding for fixing of light into high rise hanger shall deemed to be included in unit quoted rate.

Note: An amount of Rs.44,395.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

CONSTRUCTION SHELTER

SHRI SURAJIT SIKDER

MAA TARA TRADING

M/S MANODEEP CONSTRUCTION

MAJUMDER ENTERPRISE

M/S ANNI ENTERPRISE