Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹84.1 Cr
EMD Value
₹50 L
Closing Date
25 Oct 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aircraft Overhaul Division, Nasik
Aircraft Overhaul Division, Nasik
Dismantling of existing UCR compound wall and construction of new RCC peripheral compound wall *Part-I* and construction of jeepable track along peripheral compound wall at Aerodrome area *Part-II* in HAL Nasik Division
9374
NK/FW/CAP-1600/2024-25
Works
Mig Complex - Aircraft Overhaul Divn - Nasik - Works - Contracts
₹2,360
₹50 L
25 Oct 2024
20 Aug 2024
20 Aug 2024
25 Oct 2024
The Essential / Prequalification criteria are as under:
Annual Turnover: Average annual financial turn over during the last 3 years (Financial Year), ending 31st March 2023 of the previous financial year /Accounting year [ should not be less than 30% of Amount put to tender] i.e Rs.2524.00 Lakhs
TURN OVER (Rs. In Lakhs)
Audited copies and Audit report by CA of financial documents for last five (5) years Viz.Balance sheet, P &L account, Supporting Schedules and notes to account to be Uploaded to eProcurement Portal. (Attested Original Copy )
Solvency : Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of tender Submission.( Should not be less than 40% of the estimated cost i.e Rs.3365.00 Lakhs)
Related Document to be Uploaded to eProcurement Portal. (Attested Original Copy )
Not meeting eligible criteria
Experience:
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
GSTIN Registration Number.
ESIC Registration Number
EPF Registration Number
Bid Capacity ( 2AN-B)
Value of the work executed in last five Financial years (Financial year wise)
Related documents to be uploaded in eprocurement portal.
Balance Value of the existing commitments and on-going works (Works in hand/in progress) to be completed in the next Twenty Four (24) months. Related documents to be uploaded in eprocurement portal.
Integrity Pact
Tender Fees and EMD details
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,
Address for correspondence:
Contact details
PAN No.:
I.T Returns for past 03 years (Assesment Year)
Related Document to be Uploaded to eProcurement Portal. (Attested Original Copy )
Bank Balance statement for last three months.
Details of latest overdraft facilities available with bank.
Details of plant & Machinery for the work.
Proposed work completion schedule in the form of bar- chart.
Details of person holding the power of Attorney.
Related Document to be Uploaded in eProcurement Portal. (Original /Attested / Notarized)
Bank(s) details: [Copy of the cheque leaf to be uploaded]
ECS Bank details as per Annexure in tender documents , signed and sealed by concerned bank to be Uploaded to eProcurement Portal. And hard copy of original ECS and cancelled cheque to be submitted to address mentioned in e-tender notice
Acceptance by party for Scope of work as per BOQ and Tender terms & conditions
DECLARATION
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to 92) including price bid, special conditions, quality plan, tender drawings etc do hereby accept all the terms and conditions laid down
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer.
Description
Felling of tree including cutting of branches and Grubbing up tree trunk , cutting of trunk portion protruding over ground ,digging out roots ,filling holes and levelling off ground , staking of servicable tree material and removing/disposal of unservicable material to a distance not exceeding 50 M and clearing site complete all as directed by EIC.
Taking down existing concertina coil along with RBT from fencing at any height and level , including roll with suitable bundle stack at site / civil store for further use as specified as directed.
Taking down existing barbed wire from fencing post at any height and level and stack at civil store as specified as directed.
Taking down existing Fencing post from any height and level and stack at civil store as specified as directed.
Dismantling carefully the cement concrete in floor of any thickness and of any description including trimming the sides and taking out the debris and stacking for further disposal complete as directed.
Dismantling carefully the existing brick/stone masonry built in cement mortar at any position and stacking the debris at site for further disposal as directed.
Excavation over area not exceeding 1.50 Mt. deep and getting out in
Excavation in trenches not exceeding 1.50 Mt. wide & deep and getting out in
Providing and laying Plain Cement Concrete in cement mortor 1:3:6 type C-2 using 40mm graded stone aggregate for foundation,filling and mass concrete,compacting curing,all as specified and as directed.
Providing and laying Plain Cement Concrete 1:2:4 type B1 using 20mm graded stone aggregate for fencing post and other similar work, bands, plinth courses, copings, kneelers, apex stones, bed plates including mixing, placing in position, compacting, vibrating, curing, finishing the surface of concrete smooth/ hacked as required complete as specifed as directed by Engineer in charge.
Providing, fabricating, erecting in position centering & formwork for plain or reinforced cement concrete straight, horizontal, sloping as required true to line and level including all cutting & waste, centering, required bracing, strutting including required height of of steel propping and staging, at all heights/level, applying shuttering removal chemical emulsion/oil as approved and removing the form after the retention period complete as specified & as directed. Form work should be of MS/Alluminium sheet/plates of appropriate gauge with sufficient support structure. Prior to casting approval of shuttering material/design should be taken from EIC/OIC. Plywood/wooden shuttering material is not permitted. The item shall also include the required staging and supporting arrangement. The formwork shall be designed and constructed to the shapes, lines and dimensions shown on the drawing of RCC wall. All formwork joints shall be sufficiently watertight by making the gaps even by applying shuttering sealing tapes to prevent leakage of mortar.
Providing and laying in position Mild steel High strenth Thermomechanically Treated deformed (TMT) bars cut to required length bent to shape, including binding with Mild Steel wire (annealed) not less than 0.9 mm Diameter or securing with clips complete all as specified and as directed by Engineer In- Charge.
Providing and Laying M-25 REINFORCED READY MIXED CEMENT CONCRETE(RMC) (DESIGN MIX) using course aggregate and fine aggregate including placing in position, compacting, vibrating, curing, finishing the surface of concrete smooth as required complete as specifed and directed by Engineer in charge. Cement to be used for this item shall be of 43/53 Grade OPC conforming to relevant IS code and the minimum quantity specified shall be ensured. The rate of RMC shall includes any admixture required, loading, transportation by transit mixer, pumping and unloading etc. Approval of Design Mix should be taken from EIC/OIC before start of work.
Supply of 25mm thick pre-formed filler for expansion joints of approved make as specified as directed.
Returning the approved excavated soil, filling in and ramming into the sides of excavated trenches/plinth including spreading, watering and ramming in layers not exceeding 25cm all as specified and as directed.
Spreading and leveling excavated material in layers not exceeding 250 mm thick, watering and compacting with mechanical/power rollers complete as specified and as directed.
Removing excavated surplus soil , excavated soil, rock & dismantled soil to a distance exceeding 250 m but not exceeding 500 m. and depositing where directed at a level not exceeding 1.50m from starting point complete as specified and as directed.
Providing , fabricating & erecting in position structural steel angle iron for fence posts/struts of approved shaped such as L, U, V/Y etc.as shown in the drawing including providing and applying a coat of red oxide primer of approved quality and two coat of synthetic enamel paint . The scope of work includes erecting/fixing in position & embedding the same while casting concrete, drilling holes for fixing barbed wire and anchor / foundation bolt incl. necessary temporary scaffolding & erection equipments for working at all height complete as specified & as directed.( Note- Anchor bolt is to be welded to the structural steel frame as mension above after the final alignment)
Providing and fixing in position mild steel screw bolt of 16- 20mm dia ( machine made) with hexagonal or square head at oneend and screwed other or screwed both end , eaach screwed end to be fitted with washers and one hexogonal or square nut exceeding 15 cm and not exceeding 22.50 cm long complete as specified as directed.
Providing and fabricating and fixing in position framed grill made out of rolled structural steel like flats, round bar, square bar including all cutting, welding, bending, drilling and fixing to walls including providing and applying a coat of red oxide primer of approved quality and two coat of synthetic enamel paint . etc. complete as specified and as directed by EIC
Forming embankment with approved HAL murum including excavation, transporting, within a distance of 250M to 500 M , spreading and leveling in layers not exceeding 300 mm thick, watering and compacting with mechanical/power rollers complete as specified and as directed.(Under optimum moisture content standard proctor density shall not less than 95%) Note: Location for excavation for murrum will be as directed by EIC only.
Providing and laying 70mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate for narrow width including surface even and smooth finished without using extra cement complete as directed
Proving and fixing in position galvanized 2 strand steel barbed wire with 2.24mm dia. line wire & 2.00mm dia barbs at 75mm spacing incl. straining and fixing to any type of structural member including provision of galvanized MS wire staples or steel pins complete all as specified and as directed. (NOTE : Barbed wire shall confirm to IS -278-2001 or latest and barbed wire shall be manufactured fro GI steel wire conforming to IS-280- 2006, GI coating of steel wire will conform to IS 4826)
Supply of concertina Wire (Razor blade Tape (RBT) of 1050mm dia Spiral coil Wt. 15.00 Kgs./ Coil covering 10.00 Rm (approximate.), hot dip galvanized high tensile wire having main wire of thickness not less than 2.59 mm(12G); blade length 9.5mm to 10mm of 0.5 mm thick and clip's of 1.5mm thick at suitable intervals and a same a straight RBT galvanized high tensile wire,complete as specified. The wire shall have, zinc coating 260 gms/sq.met as per IS4826 -1979 .
Fixing of concertina Wire (Razor blade Tape (RBT) of 1050mm dia Spiral coil with a straight RBT galvanized high tensile wire( 2 line for each coil), so as to retain the wire in the required shape at any position and level with required accesories, including necessary temporary scaffolding & erection equipments for working at all height all complete as specified. The gap between two adjacent individual ring in a coil shall not be more than 300mm c/c after fixing in the approved stretched condition as specified as directed.
Providing and Finishing exterior walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shades with Two coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior alkali resistant primer applied @ 2.20 kg/10 sqm of approved quality, brand (Asian -Apex Ultima Protek or equivalant) & applying with roller for fair finish as approved by EIC on surface including necessary preparatory works such as brooming & brushing down with wire brush , washing down with water including scaffolding for working at any height & level , cleaning complete all as specified and as directed by EIC. ( Note:- The scope of work includes providing and filling the cracks of any description , wherever necessary on the wall surface being painted, at all levels, using acrylic / polymer or silicon based crack sealing chemical as approved including necessary preparatory works such as, cleaning and widening as specified and directed)
Providing and laying in position 110 mm dia. PVC (SWR) pipe for weep hole in slope and levels including cutting , placing in any length and position complete as specified and as directed.
Excavation in post holes ( or similar holes) each not exceeding 0.5 cu.m. , in any strata getting out , returning, filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 cm all as specified and directed by EIC.
Site clearance before execution of work over any kind of soil including cleared of shrubs, vegitation , grass bushs, weed, tree and saplings not exceeding 30cm in girth.material disposed off up to 50m outside the periphery of the area. all as complete as specified and directed by EIC
Felling of trees, grubbing up tree trunk including cutting of trunk and branches and Grubbing up tree trunk protruding over ground ,digging out roots ,filling holes and levelling off ground, stacking of servicable material near site , removing of unservicable material to a distance not exceeding 50 M and clearing site complete all as directed.
Excavation over area not exceeding 1.50 Mt. deep and getting out in ..........
Removing excavated surplus soil, excavated soil, rock & dismantled soil to a distance exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.50m from starting point complete as specified and as directed.
Forming embankment including raising (or lowering) earth with excavated murrum under item no.3b including transporting exceeding 250M and not exceeding 500M, spreading and leveling in layers not exceeding 300 mm thick, watering & compacting, with mechanical/ power rollers, finishing to the required size, shape and camber complete as specified and as directed.(Under optimum moisture content standard proctor density shall not less than 95%)
Forming embankment with approved HAL murrum including excavation, transporting, within a distance of 250 M to 500 M , spreading and leveling in layers not exceeding 300 mm thick, watering and compacting with mechanical /power rollers complete as specified and as directed. (Under optimum moisture content standard proctor density shall not less than 95%) Note: Location for excavation for murrum will be as directed by EIC only.
Construction of Granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader/paver on prepared surface, levelling to desire level and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of EIC. With Plant mix method and material conforming to Grade-I (size range 75 mm to 0.075 mm)
Excavation in trenches not exceeding 1.50 Mt. wide & deep and getting out in
Providing and laying Plain Cement Concrete in cement mortor 1:3:6 type C2 using 40 mm graded stone aggregate for foundation,filling and mass concrete, compacting curing including farmwork , all as specified and as directed.
Providing centering & formwork for plain or reinforced cement concrete straight, horizontal sloping as required including all cutting & waste centering bracing, strutting and removing the form after the retention period complete as specified & as directed for:
Providing and laying 1:1.5:3 reinforced cement concrete using 20mm crushed stone as course aggregate and river sand as fine aggregate including mixing, placing in position ,compacting, vibrating, curing, finishing the surface of concrete smooth/ hacked as required complete as specified as directed by EIC.
Reinforcement…..Providing and laying in position Mild steel High Strength deformed bar shall be produced by Thermo machanically Treated process (TMT) of 8mm dia and above for RCC works including cutting to required length ,bend to shape, hooking, cranking, binding with annealed Mild steel wire not less than 0.90mm dia or securing with clips including necessary lapping all as specified as directed by EIC.
Providing and laying RCC hume pipe of 450 mm Dia (NP3) class including providing collars, jointing in neat cement, laying pipes level or to falls in trenches, etc. all complete and as directed.
Providing and laying 125 micron thick high density polythene sheet, black laid below floor concrete with lap not less than 200mm on the joints complete as specified and as directed by EIC. ( Measurment will be taken flat on the area of concrete laid without consideration for over lap on any direction.)
Providing and laying pavement quality concrete of flexural strength 40 kg/per square centimetre in field ( as per the design mix) using minimum 400 kg of cement per cubic metre, including laying in proper line and level, with concrete(line) pump, and using fixed form paver, ensuring proper curing making bunds and ponding with cement morter(1:6), placing gunny bags/screen, complete as per drawing, specification and direction. However making slots in form work, sleeves and allied works whatsoever required is covered in this item. Minimum quantity of cement 400 kgs/Cum including the cost all cementeous materials as per design requirement.(cutting of joints and filling with the sealants wiil be paid separately)(Note : RMC will be purchased and brought at site in transit mixer from specified manufacturer of RMC.
Form work to edges of concrete ...RCC /PCC horizontal and similar work exceeding 10 cm but not exceeding 20 cm etc., in line, level etc. Complete as directed by EIC.
Forming construction joints 40 mm deep and 10mm wide filled with sealing compound (Grade A) complete as specified and as directed by EIC.
Forming 25 mm thick expansion joints 175mm depth of concrete, filled with pre-formed filler for expantion joint and top 30 mm primed and sealed with sealing compound (Grade A) , including boring hole in form work and preformed filler for fixing dowels complete complete as specified and as directed by EIC.
Providing and placing in position plain MS round bars 10 mm dia and over (Fe-250) for expansion joints between adjoining concrete bays including cutting to the required length and placing in position at expansion joint as a dowels by using double bulk head type form work, covering the required length with PVC sleeve/pipe and providing grease seal at the end , covering the said end complete as directed by EIC.
Soling (or sub base) with HAL stone /broken boulders, inter stices filled with HAL murrum, surface formed and rolled and consolidated to required gradient , camber and HAL material brought from location within lead of 250 meter all as directed by EIC/OIC.
Removing mortar from and cleaning HAL stones, obtained from masonry of any description (except ashlar facings and dressed stone work) and stone setts from pavings; stacking for measurement including all extra handling and removal and disposing off rubbish at a distance within 100 meter all as per direction of EIC/OIC.
If differential rates are quoted for the same items in different parts of the tender, the lowest rate will be applied to all the parts. Hence care shall be taken to quote same raters for same items in different parts of the tender.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
Etendernotice1600.pdf
TENDER_DOCUMENT • 0.43 MB
AnnexureL1600.pdf
TENDER_DOCUMENT • 0.20 MB
Prequalification1600.xlsm
TENDER_DOCUMENT • 0.02 MB
Pricebid1600.xlsm
TENDER_DOCUMENT • 0.05 MB
Scopeofwork.pdf
TENDER_DOCUMENT • 0.26 MB
QualityPlan.pdf
TENDER_DOCUMENT • 0.34 MB
SpecialConditions.pdf
TENDER_DOCUMENT • 0.22 MB
ECSDETAILS1600.PDF
TENDER_DOCUMENT • 0.16 MB
Tenderdrawing2.pdf
TENDER_DOCUMENT • 0.16 MB
GCC1600.pdf
TENDER_DOCUMENT • 1.03 MB
TenderDrawing1.pdf
TENDER_DOCUMENT • 0.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .