Improvement of Electrical Installations and Lighting Arrangement by replacement with LED Lights at FSD Hapur under DO Hapur

Amount

Supply of PVC insulated PVC sheathed cable of 1.1KV grade armoured Underground aluminum conductor cable as reqd confirming to IS –7098 part I or equivalent with up to date amendments of the following size.

3.5 X 35 sqmm

4 X 25 Sqmm

4 X 16 Sqmm

4 X 10 Sqmm

2 X 10 Sqmm

Supply, installation, testing and commisioning of weather proof MS loop in loop out busbar box havin 4P MCCB 63Amp and of size not less than 450x350x200 mm with 4 Nos. suitable capacity ALU (upto 150 Amp) Bus Bar (R,Y,B & N) duly finished and painting, detachable gland plate & Arrangement for interconnection etc as required conforming to relevant BIS/IS codes.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required confirming to IS694-2010 or equivalent with upto date amendments.

3 x 1.5 sq. mm

5 x 1.5 sq. mm

3 x 2.5 sq. mm

Supplying and fixing of following sizes of medium class steel conduit along with accessories in surface/ recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required conforming to IS-9537(Part3) or equivalent with upto date amendments. 25 mm

Replacement and refixing of following size of steel conduit along with all accessories in surface/recess incuding painting etc. in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

Supplying , installation , testing and commissioning of cubical type,inverted V shaped top, outdoor feeder pillar panel with size (1.0x1.0x.4 Mtr) suitable for operation at 415 (+/-) 6% Volts,50Hz,3 Phase 4 Wire system made out from CRCA sheet steel 2.0 mm and covers shall be cold rolled sheet thickness not less than 1.6mm fabricated factory finished followed-42 by powder coated painting & provided with gaskit etc. to make dust & vermin proof degree of IP ,Weather Proof, hinged type openable door , loaking arrangement , detachable gland plate , connection , interconnections with suitable size (150 Amp capacity) 4 strip high conductivety elctrical aluminium (ALU) busbar codifies in red,yellow,blue and black colour and PVC insulated copper conductor cable 1100Volt grade for internal wiring including providing and fixing digital type Ampere meter, Voltmeter, Indication LED lamp, ,Labeling comprise white letters on black background including foundation works etc as required conforming to relevant BIS/IS codes with following:- 1) 4P MCCB 100Amps,36KA-01No 2) 4P MCCB 63 Amps.25KA-02 Nos 3) MCB DP 32 Amps -02 Nos 4) TPN MCB 32Amp-02 Nos 5) 4 strip AL Busbar 150Amp- 01 Set

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required(But without MCB/RCCB/Isolator) conforming to IS-2675 (1983) or equivalent - 4 way (4+12) double door.

Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required conforming to IS-IEC60898-1 or equivalent with upto date amendments.

Single pole 16A

Double Pole 32A

Triple Pole & Neutral 63A

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required conforming to IS-2675 (1983) or equivalent. (But without MCB/RCCB/Isolator) 6 way , Double door

Supplying and fixing metal box of sizes 200 mm X 150 mm X 75 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required conforming to IS 14772(2000) or equivalent.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections , painting etc. as required conforming to IS 3854(1997) or equivalent. 5/6 amps switch

Supplying and fixing Combined Unit Box with 16A Switch & 6pin 16A Socket including connections , painting etc. as required conforming to IS 1293(2019) or equivalent.

Supply , Installation, Testing & Commissioning of integral well glass luminaire compressed of dia cast canopy gear box housing and glass driver surge with heat resistance glass of LED well glass fitting 35 to 40 watt, 110 Lm/watt to 125 Lm/watt or Luminous should not be less than 4200 conforming to IS-16103-2012 or equivalent with upto date amendments.

S/I/T/C of loop in loop out box made of PVC sheet 200 X 150 X 100 mm/suitable size having suitable size 2 nos. terminals and 01 no. SP MCB 5/6A detachable gland plate, interconnection etc. as required conforming to relevant BIS/IS codes.

Supply , Installation, Testing & Commissioning of LED Street Light fitting with mandatory driver set having die cast aluminium body and lenses suitable for 45 watt with IP66 protection and conforming to IS-16103-2012 or equivalent with upto date amendments.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V C curve DP MCB complete with connections, testing and commissioning etc. as required conforming to IS 13032/8623 or equivalent.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X .3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required conforming to IS-1239 Part-1(2004) or equivalent with upto date amendments.

Supplying of 18 to 22 watt LED retrofit polycarbonate body double side connection type tube suitable to mount on and metalic box type batten fixture conforming to IS-16103 Part2 (2012) or equivalent with upto date amendments.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II or equivalent complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but .excluding sand cushioning and protective covering etc., complete as required.90 mm dia (OD-90mm & ID-76 mm nominal)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required conforming to IS-1239 Part-1(2004) or equivalent with upto date amendments.

50 mm dia

Laying of one number PVC insulated and PVC sheathed / XLPEpower cable of 1.1KV grade of following size in the existing RCC/ HUME/ METAL/HDPE pipe as required.

Upto 35 sq. mm

Supplying and fixing of light class G.I. pipe of 50 mm dia.(nominal) 3metres length along the pole for protection of underground cable as required conforming to IS-1239 Part-1(2004) or equivalent with upto date amendments.

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required conforming to relevant BIS/IS codes

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required conforming to relevant BIS/IS codes

Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required conforming to relevant BIS/IS codes.

Credit for dismantelled/damaged items:-

Aluminium Scrap ( i.e., Cables etc)(L.S.)

Iron Scrap (Steel tubular poles, dismantled iron conduits etc.)(L.S.)

Copper Scrap (old wires, HPSV ballast etc)(L.S.)

chauhan and associates

JAGRITI ENTERPRISES

R S ELECTRICAL

HN TRADERS AND ENGINEERS